Implement the wakeup callback in the OHCI USBPortOps, so that when
a downstream device wakes up it correctly causes the OHCI controller
to come out of suspend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
HcPeriodCurrentED is read-only, but Linux writes to it anyway; silently
ignore this rather than printing a warning message.
(Specifically, drivers/usb/host/ohci-hub.c:ohci_rh_resume() writes a
0, in at least kernels 2.6.25 through 2.6.39.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds USBBusOps struct with (for now) only a single callback
which is called when a device is about to be destroyed. The USB Host
adapters are implementing this callback and use it to cancel any async
requests which might be in flight before the device actually goes away.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a usb_handle_packet function, put it into use everywhere.
Right now it just calls dev->info->handle_packet(), that will
change in future patches though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys
improves readability and allows removing some type casts.
lduw_phys and ldl_phys were not used because both require aligned
addresses. Therefore it is not possible to simply replace existing
calls by one of these functions.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This was done with:
sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \
$(git grep -l 'qemu_get_clock\>' )
sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \
$(git grep -l 'qemu_new_timer\>' )
after checking that get_clock and new_timer never occur twice
on the same line. There were no missed occurrences; however, even
if there had been, they would have been caught by the compiler.
There was exactly one false positive in qemu_run_timers:
- current_time = qemu_get_clock (clock);
+ current_time = qemu_get_clock_ns (clock);
which is of course not in this patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a path string to USBPort. Add usb_port_location() function to set
the physical location of the usb port. Update all drivers implementing
usb ports to call it. Update the monitor commands to print it. Wind it
up in qdev.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add separate detach callback to USBPortOps, split
uhci/ohci/musb/usbhub attach functions into two.
Move common code to the usb_attach() function, only
the hardware-specific bits remain in the attach/detach
callbacks.
Keep track of the port it is attached to for each usb device.
[ v3: fix tyops in usb-musb.c ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Ports on root hub will have NULL here. This is needed to reconstruct
path from device to its root hub to build device path.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch replaces explicit bswaps with endianness hints to the
mmio layer.
Because we don't depend on the target endianness anymore, we can also
move the driver over to Makefile.objs.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As stated before, devices can be little, big or native endian. The
target endianness is not of their concern, so we need to push things
down a level.
This patch adds a parameter to cpu_register_io_memory that allows a
device to choose its endianness. For now, all devices simply choose
native endian, because that's the same behavior as before.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There is no need for these type casts (as other existing
code shows). So re-write the first argument without
type cast (and remove a related TODO comment).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These clang errors are harmless but worth fixing:
CC ppc-softmmu/usb-ohci.o
/src/qemu/hw/usb-ohci.c:1104:59: error: if statement has empty body [-Wempty-body]
ohci->ctrl_head, ohci->ctrl_cur);
/src/qemu/hw/usb-ohci.c:1371:57: error: if statement has empty body [-Wempty-body]
DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum);
CC sparc64-softmmu/translate.o
/src/qemu/target-sparc/translate.c:3173:37: error: if statement has empty body [-Wempty-body]
; // XXX
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mass Storage Reset and Get Max LUN are class specific requests, but
they were not marked as such in hw/usb-msd.c, moved therefore
ClassInterfaceRequest and ClassInterfaceOutRequest from hw/usb-net.c
to hw/usb.h.
Furthermore there was a problem in hw/usb-ohci.c when using DEBUG
concerning systems where size_t is a 32 bit integer (printf resulted
in a segmentation fault).
Signed-off-by: Max Reitz <max@tyndur.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
No functional changes. I verified that the generated binary
does not change.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Acked-by: Glauber Costa <glommer@gmail.com>
Device names with whitespace require quoting in the shell and in the
monitor. Some of the offenders are also overly long. Some have a
more convenient alias, some don't.
The place for verbose device names is DeviceInfo member desc. The
name should be short & sweet.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pci.h declares some functions which aren't
defined in pci.h. Clean up moving things
to appropriate headers, and update all users.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch is preliminary for 64 bit BAR support.
Introduce dedicated type, pcibus_t, to represent pci bus address/size
instead of uint32_t.
Later this type will be changed to uint64_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
make constants for pci base address match pci_regs.h by
renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is absolutely no need to call reset functions when initializing
devices. Since we are already registering them, calling qemu_system_reset()
should suffice. Actually, it is what happens when we reboot the machine,
and using the same process instead of a special case semantics will even
allow us to find bugs easier.
Furthermore, the fact that we initialize things like the cpu quite early,
leads to the need to introduce synchronization stuff like qemu_system_cond.
This patch removes it entirely. All we need to do is call qemu_system_reset()
only when we're already sure the system is up and running
I tested it with qemu (with and without io-thread) and qemu-kvm, and it
seems to be doing okay - although qemu-kvm uses a slightly different patch.
[ v2: user mode still needs cpu_reset, so put it in ifdef. ]
[ v3: leave qemu_system_cond for now. ]
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b72.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop num_ports argument for usb_ohci_init_pci(), everybody
calls it with num_ports == 3, so it is pointless.
Convert ohci pci device into qdev.
TODO: convert non-pci ohci adapters.
You can add a OHCI USB Controller to your virtual pc now using
'-device pci-ohci'. Specifying a id is a good idea, so you can
attach usb devices to it, like this:
-device pci-ohci,id=ohci
-device usb-mouse,bus=ohci.0
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move usb code from vl.c to usb-bus.c and make it use the new data
structures added by qdev conversion. qemu usb core should be able
to handle multiple USB busses just fine now (untested though).
Kill some usb_*_init() legacy functions, use usb_create_simple()
instead.
Kill some FIXMEs added by the first qdev/usb patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add USBBus.
* Add USBDeviceInfo, move device callbacks here.
* Add usb-qdev helper functions.
* Switch drivers to qdev.
TODO:
* make the rest of qemu aware of usb busses and kill the FIXMEs
added by this patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This fixes a possible endianness issue in the usb-ohci hw module.
hcca.frame and ohci->frame_number are 16bit, so use cpu_to_le16().
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
