migrate_uri_parse() allocates memory to 'channel' if the user
opts for old syntax - uri, which is leaked because there is no
code for freeing 'channel'.
So, free channel to avoid memory leak in case where 'channels'
is empty and uri parsing is required.
Fixes: 5994024f ("migration: Implement MigrateChannelList to qmp migration flow")
Signed-off-by: Het Gala <het.gala@nutanix.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Link: https://lore.kernel.org/r/20231129204301.131228-1-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Since socket_parse() will allocate memory for 'saddr',and its value
will pass to 'addr' that allocated by migrate_uri_parse(),
then 'saddr' will no longer used,need to free.
But due to 'saddr->u' is shallow copying the contents of the union,
the members of this union containing allocated strings,and will be used after that.
So just free 'saddr' itself without doing a deep free on the contents of the SocketAddress.
Fixes: 72a8192e22 ("migration: convert migration 'uri' into 'MigrateAddress'")
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231120031428.908295-1-zhouzongmin@kylinos.cn>
This is being shadowed but the assignments at
multifd_channel_connect() and multifd_tls_channel_connect() .
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20231110200241.20679-2-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_filter_bs() need to hold a reader lock for the graph because
it calls bdrv_filter_child(), which accesses bs->file/backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231027155333.420094-4-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
-----BEGIN PGP SIGNATURE-----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=/Du0
-----END PGP SIGNATURE-----
Merge tag 'pull-vfio-20231106' of https://github.com/legoater/qemu into staging
vfio queue:
* Support for non 64b IOVA space
* Introduction of a PCIIOMMUOps callback structure to ease future
extensions
* Fix for a buffer overrun when writing the VF token
* PPC cleanups preparing ground for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmVI+bIACgkQUaNDx8/7
# 7KHW4g/9FmgX0k2Elm1BAul3slJtuBT8/iHKfK19rhXICxhxS5xBWJA8FmosTWAT
# 91YqQJhOHARxLd9VROfv8Fq8sAo+Ys8bP3PTXh5satjY5gR9YtmMSVqvsAVLn7lv
# a/0xp7wPJt2UeKzvRNUqFXNr7yHPwxFxbJbmmAJbNte8p+TfE2qvojbJnu7BjJbg
# sTtS/vFWNJwtuNYTkMRoiZaUKEoEZ8LnslOqKUjgeO59g4i3Dq8e2JCmHANPFWUK
# cWmr7AqcXgXEnLSDWTtfN53bjcSCYkFVb4WV4Wv1/7hUF5jQ4UR0l3B64xWe0M3/
# Prak3bWOM/o7JwLBsgaWPngXA9V0WFBTXVF4x5qTwhuR1sSV8MxUvTKxI+qqiEzA
# FjU89oSZ+zXId/hEUuTL6vn1Th8/6mwD0L9ORchNOQUKzCjBzI4MVPB09nM3AdPC
# LGThlufsZktdoU2KjMHpc+gMIXQYsxkgvm07K5iZTZ5eJ4tV5KB0aPvTZppGUxe1
# YY9og9F3hxjDHQtEuSY2rzBQI7nrUpd1ZI5ut/3ZgDWkqD6aGRtMme4n4GsGsYb2
# Ht9+d2RL9S8uPUh+7rV8K/N3+vXgXRaEYTuAScKtflEbA7YnZA5nUdMng8x0kMTQ
# Y73XCd4UGWDfSSZsgaIHGkM/MRIHgmlrfcwPkWqWW9vF+92O6Hw=
# =/Du0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:35:30 HKT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231106' of https://github.com/legoater/qemu: (22 commits)
vfio/common: Move vfio_host_win_add/del into spapr.c
vfio/spapr: Make vfio_spapr_create/remove_window static
vfio/container: Move spapr specific init/deinit into spapr.c
vfio/container: Move vfio_container_add/del_section_window into spapr.c
vfio/container: Move IBM EEH related functions into spapr_pci_vfio.c
util/uuid: Define UUID_STR_LEN from UUID_NONE string
util/uuid: Remove UUID_FMT_LEN
vfio/pci: Fix buffer overrun when writing the VF token
util/uuid: Add UUID_STR_LEN definition
hw/pci: modify pci_setup_iommu() to set PCIIOMMUOps
test: Add some tests for range and resv-mem helpers
virtio-iommu: Consolidate host reserved regions and property set ones
virtio-iommu: Implement set_iova_ranges() callback
virtio-iommu: Record whether a probe request has been issued
range: Introduce range_inverse_array()
virtio-iommu: Introduce per IOMMUDevice reserved regions
util/reserved-region: Add new ReservedRegion helpers
range: Make range_compare() public
virtio-iommu: Rename reserved_regions into prop_resv_regions
vfio: Collect container iova range info
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We were not unlocking bitmap mutex on the error case. To fix it
forever change to enclose the code with WITH_QEMU_LOCK_GUARD().
Coverity CID 1523750.
Fixes: a2326705e5 ("migration: Stop migration immediately in RDMA error paths")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231103074245.55166-1-quintela@redhat.com>
qemu_uuid_unparse() includes a trailing NUL when writing the uuid
string and the buffer size should be UUID_FMT_LEN + 1 bytes. Add a
define for this size and use it where required.
Cc: Fam Zheng <fam@euphon.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: "Denis V. Lunev" <den@openvz.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Integrate MigrateChannelList with all transport backends
(socket, exec and rdma) for both src and dest migration
endpoints for hmp migration.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20231023182053.8711-14-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Integrate MigrateChannelList with all transport backends
(socket, exec and rdma) for both src and dest migration
endpoints for qmp migration.
For current series, limit the size of MigrateChannelList
to single element (single interface) as runtime check.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-13-farosas@suse.de>
migration_channels_and_uri_compatible() check for transport mechanism
suitable for multifd migration gets executed when the caller calls old
uri syntax. It needs it to be run when using the modern MigrateChannel
QAPI syntax too.
After URI -> 'MigrateChannel' :
migration_channels_and_uri_compatible() ->
migration_channels_and_transport_compatible() passes object as argument
and check for valid transport mechanism.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-12-farosas@suse.de>
MigrateChannelList allows to connect accross multiple interfaces.
Add MigrateChannelList struct as argument to migration QAPIs.
We plan to include multiple channels in future, to connnect
multiple interfaces. Hence, we choose 'MigrateChannelList'
as the new argument over 'MigrateChannel' to make migration
QAPIs future proof.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-10-farosas@suse.de>
Convert the file: URI to accept a FileMigrationArgs to be compatible
with the new migration QAPI.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-9-farosas@suse.de>
Exec transport backend for 'migrate'/'migrate-incoming' QAPIs accept
new wire protocol of MigrateAddress struct.
It is achived by parsing 'uri' string and storing migration parameters
required for exec connection into strList struct.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-8-farosas@suse.de>
RDMA based transport backend for 'migrate'/'migrate-incoming' QAPIs
accept new wire protocol of MigrateAddress struct.
It is achived by parsing 'uri' string and storing migration parameters
required for RDMA connection into well defined InetSocketAddress struct.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-7-farosas@suse.de>
Socket transport backend for 'migrate'/'migrate-incoming' QAPIs accept
new wire protocol of MigrateAddress struct.
It is achived by parsing 'uri' string and storing migration parameters
required for socket connection into well defined SocketAddress struct.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-6-farosas@suse.de>
This patch parses 'migrate' and 'migrate-incoming' QAPI's 'uri'
string containing migration connection related information
and stores them inside well defined 'MigrateAddress' struct.
Fabiano fixed for "file" transport.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-4-farosas@suse.de>
Message-ID: <20231023182053.8711-5-farosas@suse.de>
Now we have a Error** passed into the return path thread stack, which is
even clearer than an int retval. Change ram_dirty_bitmap_reload() and the
callers to use a bool instead to replace errnos.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231017202633.296756-5-peterx@redhat.com>
Normally the postcopy recover phase should only exist for a super short
period, that's the duration when QEMU is trying to recover from an
interrupted postcopy migration, during which handshake will be carried out
for continuing the procedure with state changes from PAUSED -> RECOVER ->
POSTCOPY_ACTIVE again.
Here RECOVER phase should be super small, that happens right after the
admin specified a new but working network link for QEMU to reconnect to
dest QEMU.
However there can still be case where the channel is broken in this small
RECOVER window.
If it happens, with current code there's no way the src QEMU can got kicked
out of RECOVER stage. No way either to retry the recover in another channel
when established.
This patch allows the RECOVER phase to fail itself too - we're mostly
ready, just some small things missing, e.g. properly kick the main
migration thread out when sleeping on rp_sem when we found that we're at
RECOVER stage. When this happens, it fails the RECOVER itself, and
rollback to PAUSED stage. Then the user can retry another round of
recovery.
To make it even stronger, teach QMP command migrate-pause to explicitly
kick src/dst QEMU out when needed, so even if for some reason the migration
thread didn't got kicked out already by a failing rethrn-path thread, the
admin can also kick it out.
This will be an super, super corner case, but still try to cover that.
One can try to test this with two proxy channels for migration:
(a) socat unix-listen:/tmp/src.sock,reuseaddr,fork tcp:localhost:10000
(b) socat tcp-listen:10000,reuseaddr,fork unix:/tmp/dst.sock
So the migration channel will be:
(a) (b)
src -> /tmp/src.sock -> tcp:10000 -> /tmp/dst.sock -> dst
Then to make QEMU hang at RECOVER stage, one can do below:
(1) stop the postcopy using QMP command postcopy-pause
(2) kill the 2nd proxy (b)
(3) try to recover the postcopy using /tmp/src.sock on src
(4) src QEMU will go into RECOVER stage but won't be able to continue
from there, because the channel is actually broken at (b)
Before this patch, step (4) will make src QEMU stuck in RECOVER stage,
without a way to kick the QEMU out or continue the postcopy again. After
this patch, (4) will quickly fail qemu and bounce back to PAUSED stage.
Admin can also kick QEMU from (4) into PAUSED when needed using
migrate-pause when needed.
After bouncing back to PAUSED stage, one can recover again.
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2111332
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231017202633.296756-3-peterx@redhat.com>
rp_state.error was a boolean used to show error happened in return path
thread. That's not only duplicating error reporting (migrate_set_error),
but also not good enough in that we only do error_report() and set it to
true, we never can keep a history of the exact error and show it in
query-migrate.
To make this better, a few things done:
- Use error_setg() rather than error_report() across the whole lifecycle
of return path thread, keeping the error in an Error*.
- With above, no need to have mark_source_rp_bad(), remove it, alongside
with rp_state.error itself.
- Use migrate_set_error() to apply that captured error to the global
migration object when error occured in this thread.
- Do the same when detected qemufile error in source return path
We need to re-export qemu_file_get_error_obj() to do the last one.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231017202633.296756-2-peterx@redhat.com>
Extend the blocker interface so that a blocker can be registered for
one or more migration modes. The existing interfaces register a
blocker for all modes, and the new interfaces take a varargs list
of modes.
Internally, maintain a separate blocker list per mode. The same Error
object may be added to multiple lists. When a block is deleted, it is
removed from every list, and the Error is freed.
No functional change until a new mode is added.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-3-git-send-email-steven.sistare@oracle.com>
Create a mode migration parameter that can be used to select alternate
migration algorithms. The default mode is normal, representing the
current migration algorithm, and does not need to be explicitly set.
No functional change until a new mode is added, except that the mode is
shown by the 'info migrate' command.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-2-git-send-email-steven.sistare@oracle.com>
This patch is inspired by Joao Martin's patch here:
https://lore.kernel.org/r/20230926161841.98464-1-joao.m.martins@oracle.com
Add tracepoints for major downtime checkpoints on both src and dst. They
share the same tracepoint with a string showing its stage.
Besides the checkpoints in the previous patch, this patch also added
destination checkpoints.
On src, we have these checkpoints added:
- src-downtime-start: right before vm stops on src
- src-vm-stopped: after vm is fully stopped
- src-iterable-saved: after all iterables saved (END sections)
- src-non-iterable-saved: after all non-iterable saved (FULL sections)
- src-downtime-stop: migration fully completed
On dst, we have these checkpoints added:
- dst-precopy-loadvm-completes: after loadvm all done for precopy
- dst-precopy-bh-*: record BH steps to resume VM for precopy
- dst-postcopy-bh-*: record BH steps to resume VM for postcopy
On dst side, we don't have a good way to trace total time consumed by
iterable or non-iterable for now. We can mark it by 1st time receiving a
FULL / END section, but rather than that let's just rely on the other
tracepoints added for vmstates to back up the information.
With this patch, one can enable "vmstate_downtime*" tracepoints and it'll
enable all tracepoints for downtime measurements necessary.
Drop loadvm_postcopy_handle_run_bh() tracepoint alongside, because they
service the same purpose, which was only for postcopy. We then have
unified prefix for all downtime relevant tracepoints.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231030163346.765724-6-peterx@redhat.com>
Provide a helper for non-COLO use case of migration to stop a VM. This
prepares for adding some downtime relevant tracepoints to migration, where
they may or may not apply to COLO.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231030163346.765724-5-peterx@redhat.com>
We have a bunch of savevm_section* tracepoints, they're good to analyze
migration stream, but not always suitable if someone would like to analyze
the migration downtime. Two major problems:
- savevm_section* tracepoints are dumping all sections, we only care
about the sections that contribute to the downtime
- They don't have an identifier to show the type of sections, so no way
to filter downtime information either easily.
We can add type into the tracepoints, but instead of doing so, this patch
kept them untouched, instead of adding a bunch of downtime specific
tracepoints, so one can enable "vmstate_downtime*" tracepoints and get a
full picture of how the downtime is distributed across iterative and
non-iterative vmstate save/load.
Note that here both save() and load() need to be traced, because both of
them may contribute to the downtime. The contribution is not a simple "add
them together", though: consider when the src is doing a save() of device1
while the dest can be load()ing for device2, so they can happen
concurrently.
Tracking both sides make sense because device load() and save() can be
imbalanced, one device can save() super fast, but load() super slow, vice
versa. We can't figure that out without tracing both.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231030163346.765724-4-peterx@redhat.com>
Unify the three users on recording downtimes with the same pair of helpers.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231030163346.765724-3-peterx@redhat.com>
Postcopy calculates its downtime separately. It always sets
MigrationState.downtime properly, but not MigrationState.downtime_start.
Make postcopy do the same as other modes on properly recording the
timestamp when the VM is going to be stopped. Drop the temporary variable
in postcopy_start() along the way.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231030163346.765724-2-peterx@redhat.com>
Before finally register one SaveStateEntry, we detect for duplicated
entries. This could be helpful to notify us asap instead of get
silent migration failures which could be hard to diagnose.
For example, this patch will generate a message like this (if without
previous fixes on x2apic) as long as we wants to boot a VM instance
with "-smp 200,maxcpus=288,sockets=2,cores=72,threads=2" and QEMU will
bail out even before VM starts:
savevm_state_handler_insert: Detected duplicate SaveStateEntry: id=apic, instance_id=0x0
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-10-quintela@redhat.com>
Current code does:
- register pre_2_10_vmstate_dummy_icp with "icp/server" and instance
dependinfg on cpu number
- for newer machines, it register vmstate_icp with "icp/server" name
and instance 0
- now it unregisters "icp/server" for the 1st instance.
This is wrong at many levels:
- we shouldn't have two VMSTATEDescriptions with the same name
- In case this is the only solution that we can came with, it needs to
be:
* register pre_2_10_vmstate_dummy_icp
* unregister pre_2_10_vmstate_dummy_icp
* register real vmstate_icp
Created vmstate_replace_hack_for_ppc() with warnings left and right
that it is a hack.
CC: Cedric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-8-quintela@redhat.com>
This let us simplify code of this shape.
qemu_fflush(f);
int ret = qemu_file_get_error(f);
if (ret) {
return ret;
}
into:
int ret = qemu_fflush(f);
if (ret) {
return ret;
}
I updated all callers where there is any error check.
qemu_fclose() don't need to check for f->last_error because
qemu_fflush() returns it at the beggining of the function.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-13-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
After last commit, it is a write only variable.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-12-quintela@redhat.com>
There are only two differnces with the old value:
- the amount of QEMUFile that hasn't yet been flushed. It can be
discussed what is more exact, the new or the old one.
- the amount of transferred bytes that we forgot to account for (the
newer is better, i.e. exact).
Notice that this two values are used to:
a - present to the user
b - calculate the rate_limit
So a few KB here and there is not going to make a difference.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-11-quintela@redhat.com>
If we pass a NULL error is the same that returning directly the value.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-10-quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-9-quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-8-quintela@redhat.com>
qemu_file_transferred() don't exist anymore, so we can reuse the name.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-7-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We only use migration_transferred_bytes() to calculate the rate_limit,
for that we don't need to flush whatever is on the qemu_file buffer.
Remember that the buffer is really small (normal case is 32K if we use
iov's can be 64 * TARGET_PAGE_SIZE), so this is not relevant to
calculations.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-5-quintela@redhat.com>
This way we can read it from any thread.
I checked that it gives the same value as the current one. We never
use two qemu_files at the same time.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-3-quintela@redhat.com>
We only call qemu_file_transferred_* on the sending side. Remove the
increment at qemu_file_fill_buffer() and add asserts to
qemu_file_transferred* functions.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231025091117.6342-2-quintela@redhat.com>
In multiple places, RDMA errors are handled in a strange way, where it only
sets qemu_file_set_error() but not stop the migration immediately.
It's not obvious what will happen later if there is already an error. Make
all such failures stop migration immediately.
Cc: Zhijian Li (Fujitsu) <lizhijian@fujitsu.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Fabiano Rosas <farosas@suse.de>
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231024163933.516546-1-peterx@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018115513.2163-6-quintela@redhat.com>
It is obsolete. It is better to use driver-mirror with NBD instead.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Hanna Czenczek <hreitz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018115513.2163-5-quintela@redhat.com>
Use blocked-mirror with NBD instead.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018115513.2163-4-quintela@redhat.com>
Use blockdev-mirror with NBD instead.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018115513.2163-3-quintela@redhat.com>
commit 13cde50889 ("vmstate: Return error in case of error") sets
QemuFile error to stop reading from it and report to the caller (checked
by unit tests). We should do the same on subsection loading error.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231024084043.2926316-8-marcandre.lureau@redhat.com>
The function is used on save at this point. The following commits will
use it on load.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231024084043.2926316-5-marcandre.lureau@redhat.com>
Rename the variable here to avoid that it shadows a variable from
the beginning of the function scope. With this change the code now
successfully compiles with -Wshadow=local.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231024092220.55305-1-thuth@redhat.com>
