Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract 4900 lines from the huge translate.c to a new file,
'nanomips_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-13-f4bug@amsat.org>
Extract 3200+ lines from the huge translate.c to a new file,
'micromips_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-12-f4bug@amsat.org>
Extract 1100+ lines from the huge translate.c to a new file,
'mips16e_translate.c.inc'. As there are too many inter-
dependencies we don't compile it as another object, but
keep including it in the big translate.o. We gain in code
maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-10-f4bug@amsat.org>
We want to extract the microMIPS ISA and Code Compaction ASE to
new compilation units.
We will first extract this code as included source files (.c.inc),
then make them new compilation units afterward.
The following methods are going to be used externally:
micromips_translate.c.inc:1778: gen_ldxs(ctx, rs, rt, rd);
micromips_translate.c.inc:1806: gen_align(ctx, 32, rd, rs, ...
micromips_translate.c.inc:2859: gen_addiupc(ctx, reg, offset, ...
mips16e_translate.c.inc:444: gen_addiupc(ctx, ry, offset, ...
To avoid too much code churn, it is simpler to declare these
prototypes in "translate.h" now.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174907.2904067-2-f4bug@amsat.org>
There were two bugs here: (1) the required endianness was
not present in the MemOp, and (2) we were not providing a
zero-extended input to the bswap as semantics required.
The best fix is to fold the bswap into the memory operation,
producing the desired result directly.
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We don't need to maintain 2 sets of decodetree definitions.
Merge them into a single file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174636.2902654-3-f4bug@amsat.org>
Only trans_MSA() calls gen_msa(), inline it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174636.2902654-2-f4bug@amsat.org>
Since all entries are no more than 3/4/6 bytes (including nul
terminator), can save space and pie runtime relocations by
declaring regnames[] as array of 3/4/6 const char.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-10-f4bug@amsat.org>
Keep host_to_mips_errno[] in .rodata by marking the array const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-9-f4bug@amsat.org>
Per the "MIPS® Architecture Extension: nanoMIPS32 DSP Technical
Reference Manual — Revision 0.04" p. 88 "BPOSGE32C", offset argument (imm)
should be left-shifted first.
This change was tested against test_dsp_r1_bposge32.c DSP test.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Filip Vidojevic <filip.vidojevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <VI1PR0302MB34869449EE56F226FC3C21129C309@VI1PR0302MB3486.eurprd03.prod.outlook.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These switch cases for the microMIPS BPOSGE32 / BPOSGE64 opcodes have
been added commit 3c824109da ("target-mips: microMIPS ASE support").
More than 11 years later it is safe to assume there won't be added
soon. The cases fall back to the default which generates a RESERVED
INSTRUCTION, so it is safe to remove them.
Functionally speaking, the patch is a no-op.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-8-f4bug@amsat.org>
These placeholder comments for SmartMIPS and MDMX extensions have
been added commit 3c824109da ("target-mips: microMIPS ASE support").
More than 11 years later it is safe to assume there won't be added
soon, so remove these unuseful comments.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-7-f4bug@amsat.org>
Commit 043715d1e0 ("target/mips: Update ITU to utilize SAARI
and SAAR CP0 registers") declared itc_reconfigure() in public
namespace, while it is restricted to system emulation.
Similarly commit 5679479b9a ("target/mips: Move CP0 helpers
to sysemu/cp0.c") restricted cpu_mips_soft_irq() definition to
system emulation, but forgot to restrict its declaration.
To avoid polluting user-mode emulation with these declarations,
restrict them to sysemu. Also restrict the sysemu ITU/ITC/IRQ
fields from CPUMIPSState.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-6-f4bug@amsat.org>
We moved various TCG source files in commit a2b0a27d33
("target/mips: Move TCG source files under tcg/ sub directory")
but forgot to move the header declaring their prototypes.
Do it now, since all it declares is TCG specific.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-5-f4bug@amsat.org>
Commit a2b0a27d33 ("target/mips: Move TCG source files under
tcg/ sub directory") forgot to move the trace-event file.
As it only contains TCG events, move it for consistency.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-4-f4bug@amsat.org>
On real hardware an invalid instruction doesn't halt the world,
but usually triggers a RESERVED INSTRUCTION exception.
TCG guest code shouldn't abort QEMU anyway.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-2-f4bug@amsat.org>
Per the "MIPS® DSP Module for MIPS64 Architecture" manual, rev. 3.02,
Table 5.3 "SPECIAL3 Encoding of Function Field for DSP Module":
If the Module/ASE is not implemented, executing such an instruction
must cause a Reserved Instruction Exception.
The DINSV instruction lists the following exceptions:
- Reserved Instruction
- DSP Disabled
If the MIPS core doesn't support the DSP module, or the DSP is
disabled, do not handle the '$rt = $0' case as a no-op but raise
the proper exception instead.
Cc: Jia Liu <proljc@gmail.com>
Fixes: 1cb6686cf9 ("target-mips: Add ASE DSP bit/manipulation instructions")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210529165443.1114402-1-f4bug@amsat.org>
Fix multiple TCG temporary leaks in gen_pool32a5_nanomips_insn().
Fixes: 3285a3e444 ("target/mips: Add emulation of DSP ASE for nanoMIPS - part 1")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210617174323.2900831-3-f4bug@amsat.org>
Fix a pair of TCG temporary leak when translating nanoMIPS SHILO opcode.
Fixes: 3285a3e444 ("target/mips: Add emulation of DSP ASE for nanoMIPS")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210530094538.1275329-1-f4bug@amsat.org>
Use the BIT_ULL() macro to ensure we use 64-bit arithmetic.
This fixes the following Coverity issue (OVERFLOW_BEFORE_WIDEN):
CID 1452921: Integer handling issues:
Potentially overflowing expression "1 << w" with type "int"
(32 bits, signed) is evaluated using 32-bit arithmetic, and
then used in a context that expects an expression of type
"uint64_t" (64 bits, unsigned).
Fixes: 074cfcb4da ("target/mips: Implement hardware page table walker")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210505215119.1517465-1-f4bug@amsat.org>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Add a flag to MIPSCPUClass in order to avoid needing to
replace mips_tcg_ops.do_transaction_failed.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration is specific to system emulation.
- Move the CPUClass::vmsd field to SysemuCPUOps,
- restrict VMSTATE_CPU() macro to sysemu,
- vmstate_dummy is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-16-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quoting Peter Maydell [*]:
There are two ways to handle migration for
a CPU object:
(1) like any other device, so it has a dc->vmsd that covers
migration for the whole object. As usual for objects that are a
subclass of a parent that has state, the first entry in the
VMStateDescription field list is VMSTATE_CPU(), which migrates
the cpu_common fields, followed by whatever the CPU's own migration
fields are.
(2) a backwards-compatible mechanism for CPUs that were
originally migrated using manual "write fields to the migration
stream structures". The on-the-wire migration format
for those is based on the 'env' pointer (which isn't a QOM object),
and the cpu_common part of the migration data is elsewhere.
cpu_exec_realizefn() handles both possibilities:
* for type 1, dc->vmsd is set and cc->vmsd is not,
so cpu_exec_realizefn() does nothing, and the standard
"register dc->vmsd for a device" code does everything needed
* for type 2, dc->vmsd is NULL and so we register the
vmstate_cpu_common directly to handle the cpu-common fields,
and the cc->vmsd to handle the per-CPU stuff
You can't change a CPU from one type to the other without breaking
migration compatibility, which is why some guest architectures
are stuck on the cc->vmsd form. New targets should use dc->vmsd.
To avoid new targets to start using type (2), rename cc->vmsd as
cc->legacy_vmsd. The correct field to implement is dc->vmsd (the
DeviceClass one).
See also commit b170fce3dd ("cpu: Register VMStateDescription
through CPUState") for historic background.
[*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg800849.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210517105140.1062037-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This behavior is currently hard-coded in parts_silence_nan,
but setting this bit properly will allow this to be cleaned up.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To ease maintenance, move all TCG specific files under the tcg/
sub-directory. Adapt the Meson machinery.
The following prototypes:
- mips_tcg_init()
- mips_cpu_do_unaligned_access()
- mips_cpu_do_transaction_failed()
can now be restricted to the "tcg-internal.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-29-f4bug@amsat.org>
Opcodes accessing Coprocessor 0 are privileged.
Move the CP0 helpers to sysemu/ and simplify the #ifdef'ry.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-28-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-27-f4bug@amsat.org>
Move helper_cache() to tcg/sysemu/special_helper.c.
The CACHE opcode is privileged and is not accessible in user
emulation. However we get a link failure when restricting the
symbol to sysemu. For now, add a stub helper to satisfy linking,
which abort if ever called.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-25-f4bug@amsat.org>
Move the Special opcodes helpers to tcg/sysemu/special_helper.c.
Since mips_io_recompile_replay_branch() is set as
CPUClass::io_recompile_replay_branch handler in cpu.c,
we need to declare its prototype in "tcg-internal.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-24-f4bug@amsat.org>
The 3 map_address() handlers are local to tlb_helper.c,
no need to have their prototype declared publically.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-23-f4bug@amsat.org>
Move tlb_helper.c to the tcg/sysemu/ subdir, along with
the following 3 declarations to tcg-internal.h:
- cpu_mips_tlb_flush()
- cpu_mips_translate_address()
- r4k_invalidate_tlb()
Simplify tlb_helper.c #ifdef'ry because files in tcg/sysemu/
are only build when sysemu mode is configured.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-22-f4bug@amsat.org>
mmu_init() is only required by TCG accelerator.
Restrict its declaration and call to TCG.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-21-f4bug@amsat.org>
Move cp0_helper.c and mips-semi.c to the new tcg/sysemu/ folder,
adapting the Meson machinery.
Move the opcode definitions to tcg/sysemu_helper.h.inc.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-20-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-19-f4bug@amsat.org>
Declare get_physical_address() with local scope and move it along
with mips_cpu_get_phys_page_debug() to sysemu/physaddr.c new file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-18-f4bug@amsat.org>
Move sysemu-specific files under the new sysemu/ subfolder
and adapt the Meson machinery.
Update the KVM MIPS entry in MAINTAINERS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-17-f4bug@amsat.org>
We have 2 blocks guarded with #ifdef for sysemu, which
are simply separated by the cpu_signal_handler definition.
To simplify the following commits which involve various
changes in internal.h, first join the sysemu-guarded blocks.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-16-f4bug@amsat.org>
tlb_helper.c's #ifdef'ry hides a quite simple user-mode
implementation of mips_cpu_tlb_fill().
Copy the user-mode implementation (without #ifdef'ry) to
tcg/user/helper.c and simplify tlb_helper.c's #ifdef'ry.
This will allow us to restrict tlb_helper.c to sysemu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-15-f4bug@amsat.org>
The #ifdef'ry hides that the user-mode implementation of
mips_cpu_do_interrupt() simply sets exception_index = EXCP_NONE.
Add this simple implementation to tcg/user/tlb_helper.c, and
the corresponding Meson machinery to build this file when user
emulation is configured.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-14-f4bug@amsat.org>
We will gradually move TCG-specific declarations to a new local
header: "tcg-internal.h". To keep review simple, first add this
header with 2 TCG prototypes, which we are going to move in the
next 2 commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-13-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-11-f4bug@amsat.org>
Currently cpu_mips_translate_address() calls raise_mmu_exception(),
and do_translate_address() calls cpu_loop_exit_restore().
This API split is dangerous, we could call cpu_mips_translate_address
without returning to the main loop.
As there is only one caller, it is trivial (and safer) to merge
do_translate_address() back to cpu_mips_translate_address().
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-10-f4bug@amsat.org>
Rename set_pc() as mips_env_set_pc(), declare it inlined
and use it in cpu.c and op_helper.c.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210428170410.479308-9-f4bug@amsat.org>
Turn printfpr() macro into a proper function: fpu_dump_fpr().
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-8-f4bug@amsat.org>
As mips_cpu_dump_state() is only used once to initialize the
CPUClass::dump_state handler, we can move it to cpu.c to keep
it symbol local.
Beside, this handler is used by all accelerators, while the
translate.c file targets TCG.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-7-f4bug@amsat.org>
Since all entries are no more than 4 bytes (including nul
terminator), can save space and pie runtime relocations by
declaring regnames[] as array of 4 const char.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-6-f4bug@amsat.org>
The CPU/FPU regnames[] arrays is used in mips_tcg_init() and
mips_cpu_dump_state(), which while being in translate.c is
not specific to TCG.
To be able to move mips_cpu_dump_state() to cpu.c, which is
compiled for all accelerator, we need to make the regnames[]
arrays global to target/mips/ by declaring them in "internal.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-5-f4bug@amsat.org>
mips_cpu_reset() is used by all accelerators, and calls
msa_reset(), which is defined in msa_helper.c.
Beside msa_reset(), the rest of msa_helper.c is only useful
to the TCG accelerator. To be able to restrict this helper
file to TCG, we need to move msa_reset() out of it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-4-f4bug@amsat.org>
restore_msa_fp_status() is declared inlined in fpu_helper.h,
and uses the ieee_rm[] array. Therefore any code calling
restore_msa_fp_status() must have access to this ieee_rm[] array.
kvm_mips_get_fpu_registers(), which is in target/mips/kvm.c,
calls restore_msa_fp_status.
Except this tiny array, the rest of fpu_helper.c is only useful
for the TCG accelerator.
To be able to restrict fpu_helper.c to TCG, we need to move the
ieee_rm[] array to a new source file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-3-f4bug@amsat.org>
We already have the mips_tcg_ss source set for TCG-specific files,
use it for mxu_translate.c and tx79_translate.c to simplify a bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210428170410.479308-2-f4bug@amsat.org>
To avoid callers to emit dead code if check_cp0_enabled()
raise an exception, let it return a boolean value, whether
CP0 is enabled or not.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210420193453.1913810-4-f4bug@amsat.org>
When running with '-d unimp' all MTHC0 opcode executed
are logged as unimplemented... Add the proper 'return'
statement missed from commit 5204ea79ea.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210422081055.2349216-1-f4bug@amsat.org>
The CACHEE opcode "requires CP0 privilege".
The pseudocode checks in the ISA manual is:
if is_eva and not C0.Config5.EVA:
raise exception('RI')
if not IsCoprocessor0Enabled():
raise coprocessor_exception(0)
Add the missing checks.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210420175426.1875746-1-f4bug@amsat.org>
When adding this file and its new content in commit 3f7a927847
("target/mips: LSA/DLSA R6 decodetree helpers") I did 2 mistakes:
1: Listed authors who haven't been involved in its development,
2: Used an incorrect GNU GPLv2 license text (using 'and' instead
of 'or').
Instead of correcting the GNU GPLv2 license text, replace the license
by the 'GNU LGPL v2.1 or later' one, to be coherent with the other
translation files in the target/mips/ folder.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210420100633.1752440-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a TCG temporary leak when translating CACHE opcode.
Fixes: 0d74a222c2 ("make ITC Configuration Tags accessible to the CPU")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210406202857.1440744-1-f4bug@amsat.org>
Coverity reported (CID 1450831) an array overrun in
gen_mxu_D16MAX_D16MIN():
1103 } else if (unlikely((XRb == 0) || (XRa == 0))) {
....
1112 if (opc == OPC_MXU_D16MAX) {
1113 tcg_gen_smax_i32(mxu_gpr[XRa - 1], t0, t1);
1114 } else {
1115 tcg_gen_smin_i32(mxu_gpr[XRa - 1], t0, t1);
1116 }
>>> Overrunning array "mxu_gpr" of 15 8-byte elements at element
index 4294967295 (byte offset 34359738367) using index "XRa - 1U"
(which evaluates to 4294967295).
This happens because the code is confused about which of XRa, XRb and
XRc is the output, and which are the inputs. XRa is the output, but
most of the conditions separating out different special cases are
written as if XRc is the output, with the result that we can end up
in the code path that assumes XRa is non-0 even when it is zero.
Fix the erroneous code, bringing it in to line with the structure
used in functions like gen_mxu_S32MAX_S32MIN() and
gen_mxu_Q8MAX_Q8MIN().
Fixes: CID 1450831
Fixes: bb84cbf385
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210316131353.4533-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This comment describing the tx79 opcodes is helpful. As we
will implement these instructions in tx79_translate.c, move
the comment there.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-15-f4bug@amsat.org>
We have almost 400 lines of code full of /* TODO */ comments
which end calling gen_reserved_instruction().
As we are not going to implement them, and all the caller's
switch() default cases already call gen_reserved_instruction(),
we can remove this altogether.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-14-f4bug@amsat.org>
Simplify the PCPYH (Parallel Copy Halfword) instruction by using
multiple calls to deposit_i64() which can be optimized by some
TCG backends.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-11-f4bug@amsat.org>
We will use gen_rdhwr() outside of translate.c, make it public.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-28-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-10-f4bug@amsat.org>
Introduce decodetree structure to decode the tx79 opcodes.
Start it by moving the existing MFHI1 and MFLO1 opcodes.
Remove unnecessary comments.
As the TX79 share opcodes with the TX19/TX39/TX49 CPUs,
we introduce the decode_ext_txx9() dispatcher where we
will add the other decoders later.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-9-f4bug@amsat.org>
Extract 1600+ lines from the big translate.c into a new file.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-14-f4bug@amsat.org>
Extract the MXU register initialization code from mips_tcg_init()
as a new mxu_translate_init() helper. Make it public and replace
!TARGET_MIPS64 ifdef'ry by the 'TARGET_LONG_BITS == 32' check to
elide this code at preprocessing time.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-13-f4bug@amsat.org>
By making the prototype public and checking
'TARGET_LONG_BITS == 32' we let the compiler
elide the decode_opc_mxu() call.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-12-f4bug@amsat.org>
To easily convert MXU code to decodetree, making it return a boolean.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-11-f4bug@amsat.org>
Use "decode_{isa,ase,ext}_$name()" function name pattern for
public decodetree entrypoints.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-10-f4bug@amsat.org>
Move the check for MUL opcode from decode_opc_mxu() callee
to decode_opc_legacy() caller, so we can simplify the ifdef'ry
and elide the call in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-9-f4bug@amsat.org>
We already have a macro and definition to extract / check
the Special2 MUL opcode. Use it instead of the unnecessary
OPC__MXU_MUL macro.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-8-f4bug@amsat.org>
In the next commit we'll make decode_opc_mxu() match decodetree
prototype by returning a boolean. First pass ctx->opcode as an
argument.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-7-f4bug@amsat.org>
None of these MXU functions use their CPUMIPSState* env argument,
remove it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-6-f4bug@amsat.org>
All these unimplemented MXU opcodes end up calling
gen_reserved_instruction() which is the default switch
case in decode_opc_mxu().
The translate.c file is already big enough and hard to maintain,
remove 1300 lines of unnecessary code and /* TODO */ comments.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-5-f4bug@amsat.org>
No need for this obfuscated ifdef'ry, KISS.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-4-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-3-f4bug@amsat.org>
Introduce the 'mips_tcg' source set to collect TCG specific files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210226093111.3865906-2-f4bug@amsat.org>
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmBI50MACgkQ+9DbCVqe
KkSyKggAhPZW+7sReVEsFdnVfwuo3evW7auoW44mghNbikTnm3RfoahYTrek8lGZ
AEo2gFMbzENW0j88e0OvSYYtwkVz3sD68bygfXerti6sQwWlwkf42I/suWjJNLph
oVKGEEdJess9+zR13Cu6RAq5RaTwzDPGPjUwTbeJPpAps4+UZV3hsxhaxs8keII6
GBa/idnh0qEApP2NDLKiSASrYZM7xGvljE7zO4qhchd6iSH/o5rCtkoB2tRCcXGo
+KF8LyBsUNf7GiWp0yYZMZUQ3Pqskqma8N3d2A4UlS1kXvxeX/FiORkG/Ne8bH1Z
VZ1Z/xbyXGlVkiP1bcoYSc6XWHNDTw==
=R9zQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging
Testing, guest-loader and other misc tweaks
- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/
# gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2:
semihosting: Move hw/semihosting/ -> semihosting/
semihosting: Move include/hw/semihosting/ -> include/semihosting/
tests/avocado: add boot_xen tests
docs: add some documentation for the guest-loader
docs: move generic-loader documentation into the main manual
hw/core: implement a guest-loader to support static hypervisor guests
device_tree: add qemu_fdt_setprop_string_array helper
hw/riscv: migrate fdt field to generic MachineState
hw/board: promote fdt from ARM VirtMachineState to MachineState
.editorconfig: update the automatic mode setting for Emacs
tests/docker: Use --arch-only when building Debian cross image
gitlab-ci.yml: Add jobs to test CFI flags
gitlab-ci.yml: Allow custom # of parallel linkers
tests/docker: add a test-tcg for building then running check-tcg
docs/system: add a gentle prompt for the complexity to come
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Clock framework allows users to specify a callback which is
called after the clock's period has been updated. Some users need to
also have a callback which is called before the clock period is
updated.
As the first step in adding support for notifying Clock users on
pre-update events, add an argument to the ClockCallback to specify
what event is being notified, and add an argument to the various
functions for registering a callback to specify which events are
of interest to that callback.
Note that the documentation update renders correct the previously
incorrect claim in 'Adding a new clock' that callbacks "will be
explained in a following section".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-2-peter.maydell@linaro.org
We have handy functions to access GPR. Use gen_store_gpr() for
Move From HI/LO Register and gen_load_gpr() for Move To opcodes.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-7-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
TCG displays the upper halve registers with the same name
as their lower halves. Rename the upper halves with the
'[hi]' suffix.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The cpu::mmr[] array contains the upper halves of 128-bit GPR
registers. While they are only used by the R5900 CPU, the
concept is generic and could be used by another MIPS implementation.
Rename 'cpu::mmr' as 'cpu::gpr_hi' and make them global.
When the code is similar to the GPR lower halves, move it
close by.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-5-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We will access the cpu_HI/LO registers outside of translate.c.
Make them publicly accessible.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210214175912.732946-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Commit 83be6b5412 ("Fix MSA instructions LD.<B|H|W|D> on big endian
host") introduced use of typedef/prototypes declared in "tcg/tcg.h"
without including it. This was not a problem because "tcg/tcg.h" is
pulled in by "exec/cpu_ldst.h". To be able to remove this header
there, we first need to include it here in op_helper.c, else we get:
[222/337] Compiling C object libqemu-mips-softmmu.fa.p/target_mips_msa_helper.c.o
target/mips/msa_helper.c: In function ‘helper_msa_ld_b’:
target/mips/msa_helper.c:8214:9: error: unknown type name ‘TCGMemOpIdx’
8214 | TCGMemOpIdx oi = make_memop_idx(MO_TE | DF | MO_UNALN, \
| ^~~~~~~~~~~
target/mips/msa_helper.c:8224:5: note: in expansion of macro ‘MEMOP_IDX’
8224 | MEMOP_IDX(DF_BYTE)
| ^~~~~~~~~
target/mips/msa_helper.c:8214:26: error: implicit declaration of function ‘make_memop_idx’ [-Werror=implicit-function-declaration]
8214 | TCGMemOpIdx oi = make_memop_idx(MO_TE | DF | MO_UNALN, \
| ^~~~~~~~~~~~~~
target/mips/msa_helper.c:8227:18: error: implicit declaration of function ‘helper_ret_ldub_mmu’ [-Werror=implicit-function-declaration]
8227 | pwd->b[0] = helper_ret_ldub_mmu(env, addr + (0 << DF_BYTE), oi, GETPC());
| ^~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210207232310.2505283-4-f4bug@amsat.org>
As the 'rw' argument is unused, remove it.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210220202026.2305667-1-f4bug@amsat.org>
get_seg_physical_address() calls CPUMIPSTLBContext::map_address()
handlers passing a MMUAccessType type. Update the prototype
handlers to take a MMUAccessType argument, as it is stricter than
an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-14-f4bug@amsat.org>
get_physical_address() calls get_seg_physical_address() and
get_segctl_physical_address() passing a MMUAccessType type.
Let the prototypes use it as argument, as it is stricter than
an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-13-f4bug@amsat.org>
All these functions:
- mips_cpu_get_phys_page_debug()
- cpu_mips_translate_address()
- mips_cpu_tlb_fill()
- page_table_walk_refill()
- walk_directory()
call get_physical_address() passing a MMUAccessType type. Let the
prototype use it as argument, as it is stricter than an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-12-f4bug@amsat.org>
Both mips_cpu_tlb_fill() and cpu_mips_translate_address() pass
MMUAccessType to raise_mmu_exception(). Let the prototype use it
as argument, as it is stricter than an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-11-f4bug@amsat.org>
The single caller, do_translate_address(), passes MMUAccessType
to cpu_mips_translate_address(). Let the prototype use it as
argument, as it is stricter than an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-10-f4bug@amsat.org>
The single caller, HELPER_LD_ATOMIC(), passes MMUAccessType to
do_translate_address(). Let the prototype use it as argument,
as it is stricter than an integer.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-9-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-7-f4bug@amsat.org>
Remove these confusing and unused definitions.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-6-f4bug@amsat.org>
get_physical_address() doesn't use the 'access_type' argument,
remove it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-5-f4bug@amsat.org>
get_segctl_physical_address() doesn't use the 'access_type' argument,
remove it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-4-f4bug@amsat.org>
get_seg_physical_address() doesn't use the 'access_type' argument,
remove it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-3-f4bug@amsat.org>
TLB map_address() handlers don't use the 'access_type' argument,
remove it to simplify.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20210128144125.3696119-2-f4bug@amsat.org>
Similarly to commits ae82adc8e29..7f93879e444, use the
translator_ld*() API introduced in commit 409c1a0bf0
to fetch the code on the MIPS target.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210125105818.2707067-1-f4bug@amsat.org>
Move the code from accel/tcg/translate-all.c to target/mips/cpu.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210208233906.479571-4-richard.henderson@linaro.org>
Message-Id: <20210213130325.14781-13-alex.bennee@linaro.org>
An SEV-ES guest does not allow register state to be altered once it has
been measured. When an SEV-ES guest issues a reboot command, Qemu will
reset the vCPU state and resume the guest. This will cause failures under
SEV-ES. Prevent that from occuring by introducing an arch-specific
callback that returns a boolean indicating whether vCPUs are resettable.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <1ac39c441b9a3e970e9556e1cc29d0a0814de6fd.1611682609.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
make it consistently SOFTMMU-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: make the field presence in cpu.h unconditional, removing the ifdefs]
Message-Id: <20210204163931.7358-12-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[claudio: wrap target code around CONFIG_TCG and !CONFIG_USER_ONLY]
avoiding its use in headers used by common_ss code (should be poisoned).
Note: need to be careful with the use of CONFIG_USER_ONLY,
Message-Id: <20210204163931.7358-11-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Vendor specific CPU definitions are not very useful. Use the
ISA definitions instead, which are more helpful when looking
at the various CPU definitions.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210112210152.2072996-4-f4bug@amsat.org>
nanoMIPS not a CPU, but an ISA. The nanoMIPS ISA is already
defined as ISA_NANOMIPS32.
Remove this incorrect definition and update the single CPU
implementing it, the I7200.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210112210152.2072996-3-f4bug@amsat.org>
Commit 823f2897bd ("target/mips: Disable R5900 support")
removed the single CPU using the CPU_R5900 definition.
As it is unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210112210152.2072996-2-f4bug@amsat.org>
LL/SC opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-14-f4bug@amsat.org>
LLD/SCD opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-13-f4bug@amsat.org>
LDL/LDR/SDL/SDR opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-12-f4bug@amsat.org>
LWLE/LWRE/SWLE/SWRE (EVA) opcodes have been removed from
the Release 6. Add a single decodetree entry for the opcodes,
triggering Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-11-f4bug@amsat.org>
LWL/LWR/SWL/SWR opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-10-f4bug@amsat.org>
CACHE/PREF opcodes have been removed from the Release 6.
Add a single decodetree entry for the opcodes, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() calls.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-9-f4bug@amsat.org>
COP1x opcode has been removed from the Release 6.
Add a single decodetree entry for it, triggering
Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() call.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-8-f4bug@amsat.org>
Special2 opcode have been removed from the Release 6.
Add a single decodetree entry for all the opcode class,
triggering Reserved Instruction if ever used.
Remove unreachable check_insn_opc_removed() call.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-7-f4bug@amsat.org>
Since we switched to decodetree-generated processing,
we can remove this now unreachable code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201208203704.243704-6-f4bug@amsat.org>
LSA and LDSA opcodes are also available with MIPS release 6.
Introduce the decodetree config files and call the decode()
helpers in the main decode_opc() loop.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-24-f4bug@amsat.org>
Add the LSA opcode to the MSA32 decodetree config, add DLSA
to a new config for the MSA64 ASE, and call decode_msa64()
in the main decode_opc() loop.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-23-f4bug@amsat.org>
Extract gen_lsa() from translate.c and explode it as
gen_LSA() and gen_DLSA().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-22-f4bug@amsat.org>
Now that we can decode the MSA ASE with decode_ase_msa(),
use it and remove the previous code, now unreachable.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-21-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Introduce the 'msa32' decodetree config for the 32-bit MSA ASE.
We start by decoding:
- the branch instructions,
- all instructions based on the MSA opcode.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-20-f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Simplify gen_check_zero_element() by passing the TCGCond
argument along.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-25-f4bug@amsat.org>
Extract 2200 lines from the huge translate.c to a new file,
'msa_translate.c'. As there are too many inter-dependencies
we don't compile it as another object yet, but keep including
it in the big translate.o. We gain in code maintainability.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201120210844.2625602-5-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Make gen_msa() and gen_msa_branch() public declarations
so we can keep calling them once extracted from the big
translate.c in the next commit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-18-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Keep all MSA-related code altogether.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201120210844.2625602-4-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
We have ~400 lines of MSA helpers in the generic op_helper.c,
move them with the other helpers in 'msa_helper.c'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201123204448.3260804-5-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
translate_init.c.inc mostly contains CPU definitions.
msa_reset() doesn't belong here, move it with the MSA
helpers.
One comment style is updated to avoid checkpatch.pl warning.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-15-f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
In preparation of using the decodetree script, explode
gen_msa_branch() as following:
- OPC_BZ_V -> BxZ_V(EQ)
- OPC_BNZ_V -> BxZ_V(NE)
- OPC_BZ_[BHWD] -> BxZ(false)
- OPC_BNZ_[BHWD] -> BxZ(true)
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-10-f4bug@amsat.org>
The gen_msa*() methods don't use the "CPUMIPSState *env"
argument. Remove it to simplify.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-9-f4bug@amsat.org>
The msa_wr_d[] registers are only initialized/used by MSA.
They are declared static. We want to move them to the new
'msa_translate.c' unit in few commits, without having to
declare them global (with extern).
Extract first the logic initialization of the MSA registers
from the generic initialization. We will later move this
function along with the MSA registers to the new C unit.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-8-f4bug@amsat.org>
Commits 863f264d10 ("add msa_reset(), global msa register") and
cb269f273f ("fix multiple TCG registers covering same data")
removed the FPU scalar registers and replaced them by aliases to
the MSA vector registers.
It is not very clear to have FPU registers displayed with MSA
register names, even if MSA ASE is not present.
Instead of aliasing FPU registers to the MSA ones (even when MSA
is absent), we now alias the MSA ones to the FPU ones (only when
MSA is present).
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-7-f4bug@amsat.org>
We don't use ASE_MSA anymore (replaced by ase_msa_available()
checking MSAP bit from CP0_Config3). Remove it.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-6-f4bug@amsat.org>
Only decode MSA opcodes if MSA is present (implemented).
Now than check_msa_access() will only be called if MSA is
present, the only way to have MIPS_HFLAG_MSA unset is if
MSA is disabled (bit CP0C5_MSAEn cleared, see previous
commit). Therefore we can remove the 'reserved instruction'
exception.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-5-f4bug@amsat.org>
MSA presence is expressed by the MSAP bit of CP0_Config3.
We don't need to check anything else.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-4-f4bug@amsat.org>
Call msa_reset() unconditionally, but only reset
the MSA registers if MSA is implemented.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-3-f4bug@amsat.org>
Instead of accessing CP0_Config3 directly and checking
the 'MSA Present' bit, introduce an explicit helper,
making the code easier to read.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201208003702.4088927-2-f4bug@amsat.org>
To allow compiling 64-bit specific translation code more
generically (and removing #ifdef'ry), allow compiling
check_mips_64() on 32-bit targets.
If ever called on 32-bit, we obviously emit a reserved
instruction exception.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201215225757.764263-3-f4bug@amsat.org>
As we will slowly move to decodetree generated decoders,
extract the legacy decoding from decode_opc(), so new
decoders are added in decode_opc() while old code is
removed from decode_opc_legacy().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201215225757.764263-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-20-f4bug@amsat.org>
Extract FPU specific definitions that can be used by
ISA / ASE / extensions to translate.h header.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-16-f4bug@amsat.org>
Some FPU / Coprocessor translation functions / registers can be
used by ISA / ASE / extensions out of the big translate.c file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-15-f4bug@amsat.org>
gen_reserved_instruction() is easier to read than
generate_exception_end(ctx, EXCP_RI), replace it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-12-f4bug@amsat.org>
generate_exception_err(err=0) is simply generate_exception_end().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-11-f4bug@amsat.org>
Some CPU translation functions / registers / macros and
definitions can be used by ISA / ASE / extensions out of
the big translate.c file. Declare them in "translate.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207235539.4070364-3-f4bug@amsat.org>
Extract DisasContext to a new 'translate.h' header so
different translation files (ISA, ASE, extensions)
can use it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207235539.4070364-2-f4bug@amsat.org>
This file is not TCG specific, contains CPU definitions
and is consumed by cpu.c. Rename it as such.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-10-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-15-f4bug@amsat.org>
We are going to move this code, fix its style first.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-14-f4bug@amsat.org>
This file contains functions related to TLB management,
rename it as 'tlb_helper.c'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-13-f4bug@amsat.org>
The rest of helper.c is TLB related. Extract the non TLB
specific functions to cpu.c, so we can rename helper.c as
tlb_helper.c in the next commit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-5-f4bug@amsat.org>
To help understand ifdef'ry, add comment after #endif.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-4-f4bug@amsat.org>
Extract FPU specific helpers from "internal.h" to "fpu_helper.h".
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201120210844.2625602-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201214183739.500368-2-f4bug@amsat.org>
The MIPS ISA release 6 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-16-f4bug@amsat.org>
The MIPS ISA release 5 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-15-f4bug@amsat.org>
The MIPS ISA release 3 is common to 32/64-bit CPUs.
To avoid holes in the insn_flags type, update the
definition with the next available bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-14-f4bug@amsat.org>
The MIPS ISA release 2 is common to 32/64-bit CPUs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-13-f4bug@amsat.org>
The MIPS ISA release '1' is common to 32/64-bit CPUs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-12-f4bug@amsat.org>
Use the single ISA_MIPS32R6 definition to check if the Release 6
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R6 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-11-f4bug@amsat.org>
Use the single ISA_MIPS32R5 definition to check if the Release 5
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R5 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-10-f4bug@amsat.org>
Use the single ISA_MIPS32R3 definition to check if the Release 3
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R3 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-9-f4bug@amsat.org>
Use the single ISA_MIPS32R2 definition to check if the Release 2
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R2 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-8-f4bug@amsat.org>
Use the single ISA_MIPS32 definition to check if the Release 1
ISA is supported, whether the CPU support 32/64-bit.
For now we keep '32' in the definition name, we will rename it
as ISA_MIPS_R1 in few commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-7-f4bug@amsat.org>
MIPS 64-bit ISA is introduced with MIPS3.
Introduce the CPU_MIPS64 definition aliased to the MIPS3 ISA,
and the cpu_type_is_64bit() method to check if a CPU supports
this ISA (thus is 64-bit).
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-5-f4bug@amsat.org>
'CPU_MIPS32' and 'CPU_MIPS64' definitions concern CPUs implementing
the "Release 1" ISA. Rename it with the 'R1' suffix, as the other
CPU definitions do.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-4-f4bug@amsat.org>
Move CPU_MIPS5 after CPU_MIPS4 :)
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210104221154.3127610-3-f4bug@amsat.org>
Remove a comment added 12 years ago but never used (commit
b6d96beda3: "Use temporary registers for the MIPS FPU emulation").
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210104221154.3127610-2-f4bug@amsat.org>
It's useful for bootloader to do I/O operations.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Message-Id: <20201215064507.30148-3-jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-3-f4bug@amsat.org>
The MIPS3 and MIPS32/64 ISA use different definitions
for the CP0 Config0 register.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-2-f4bug@amsat.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently the MIPS code uses the old clock_get_ns() API to
calculate a time length in nanoseconds:
cpu->cp0_count_rate * clock_get_ns(MIPS_CPU(cpu)->clock)
This relies on the clock having a period which is an exact number
of nanoseconds.
Switch to the new clock_ticks_to_ns() function, which does the
multiplication internally at a higher precision.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
ISA features are usually denoted in read-only bits from
CPU registers. Add the GET_FEATURE_REG_EQU() macro which
checks if a CPU register has bits set to a specific value.
Use the macro to check the 'Architecture Revision' level
of the Config0 register, which is '2' when the Release 6
ISA is implemented.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201214003215.344522-5-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use the FloatRoundMode enum type introduced in commit 3dede407cc
("softfloat: Name rounding mode enum") instead of 'unsigned int'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201123204448.3260804-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-17-f4bug@amsat.org>
Nothing TCG specific there, move to common cpu code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-16-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-10-f4bug@amsat.org>
Move cpu_supports*() and cpu_set_exception_base() from
translate.c to cpu.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-9-f4bug@amsat.org>
Do not initialize MT-related config registers if the MT ASE
is not present. As some functions access the 'mvp' structure,
we still zero-allocate it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-4-f4bug@amsat.org>
Instead of accessing CP0_Config3 directly and checking
the 'Multi-Threading Present' bit, introduce an helper
to simplify code review.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-3-f4bug@amsat.org>
mvp_init() doesn't require any CPU definition (beside the
information accessible via CPUMIPSState). Remove the unused
argument.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-3-f4bug@amsat.org>
Address translation is an architectural thing (not hardware
related). Move the helpers from hw/ to target/.
As physical address and KVM are specific to system mode
emulation, restrict this file to softmmu, so it doesn't
get compiled for user-mode emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-2-f4bug@amsat.org>
Introduce cpu_supports_isa() which takes a CPUMIPSState
argument, more useful at runtime when the CPU is created
(no need to call the extensive object_class_by_name()).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207215257.4004222-3-f4bug@amsat.org>
As cpu_supports_isa() / cpu_supports_cps_smp() take a 'cpu_type'
name argument, rename them cpu_type_supports_FEAT().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207215257.4004222-2-f4bug@amsat.org>
As of Release 6, MMU type 4 is assigned to "Dual Variable-Page-Size
and Fixed-Page-Size TLBs" and type 2 to "Block Address Translation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-4-f4bug@amsat.org>
The Loongson-3A4000 is a GS464V-based processor with MIPS MSA ASE:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg763059.html
Commit af868995e1 correctly set the 'MSA present' bit of Config3
register, but forgot to allow the MSA instructions decoding in
insn_flags, so executing them triggers a 'Reserved Instruction'.
Fix by adding the ASE_MSA mask to insn_flags.
Fixes: af868995e1 ("target/mips: Add Loongson-3 CPU definition")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <20201130102228.2395100-1-f4bug@amsat.org>
Currently MIPS exceptions are displayed as string in system-mode
emulation, but as number in user-mode.
Unify by extracting the current system-mode code as excp_name()
and use that in user-mode.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201119160536.1980329-1-f4bug@amsat.org>
Remove unused headers and add missing "qemu/log.h" since
qemu_log() is called.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-5-f4bug@amsat.org>
CP0 helpers are restricted to system-mode emulation.
Do not intent do build cp0_helper.c in user-mode (this
allows to simplify some #ifdef'ry).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <20201109090422.2445166-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-7-f4bug@amsat.org>
This code must not be used outside of KVM. Abort if it is.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200429082916.10669-3-f4bug@amsat.org>
Our current code assumed the target page size is always 4k
when handling PageMask and VPN2, however, variable page size
was just added to mips target and that's no longer true.
Fixes: ee3863b9d4 ("target/mips: Support variable page size")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1604636510-8347-2-git-send-email-chenhc@lemote.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Replaced find_first_zero_bit() by cto32()]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
MIPSR6 (not only MIPS32R6) processors support unaligned access in
hardware, so set MO_UNALN in their default_tcg_memop_mask. Btw, new
Loongson-3 (such as Loongson-3A4000) also support unaligned access,
since both old and new Loongson-3 use the same binaries, we can simply
set MO_UNALN for all Loongson-3 processors.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1604053541-27822-3-git-send-email-chenhc@lemote.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com>
[PMD: Split hw/ vs target/]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Per "MIPS32 34K Processor Core Family Software User's Manual,
Revision 01.13" page 8 in "Joint TLB (JTLB)" section:
"The JTLB is a fully associative TLB cache containing 16, 32,
or 64-dual-entries mapping up to 128 virtual pages to their
corresponding physical addresses."
There is no particular reason to restrict the 34Kf core model to
16 TLB entries, so raise its config to 64.
This is helpful for other projects, in particular the Yocto Project:
Yocto Project uses qemu-system-mips 34Kf cpu model, to run 32bit
MIPS CI loop. It was observed that in this case CI test execution
time was almost twice longer than 64bit MIPS variant that runs
under MIPS64R2-generic model. It was investigated and concluded
that the difference in number of TLBs 16 in 34Kf case vs 64 in
MIPS64R2-generic is responsible for most of CI real time execution
difference. Because with 16 TLBs linux user-land trashes TLB more
and it needs to execute more instructions in TLB refill handler
calls, as result it runs much longer.
(https://lists.gnu.org/archive/html/qemu-devel/2020-10/msg03428.html)
Buglink: https://bugzilla.yoctoproject.org/show_bug.cgi?id=13992
Reported-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201016133317.553068-1-f4bug@amsat.org>
All our QOM users provides an input clock. In order to avoid
avoid future machines added without clock, display a warning.
User-mode emulation use the CP0 timer with the RDHWR instruction
(see commit cdfcad7883) so keep using the fixed 200 MHz clock
without diplaying any warning. Only display it in system-mode
emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-22-f4bug@amsat.org>
Introduce an helper to create a MIPS CPU and connect it to
a reference clock. This helper is not MIPS specific, but so
far only MIPS CPUs need it.
Suggested-by: Huacai Chen <zltjiangshi@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-13-f4bug@amsat.org>
Use the Clock API and let the CPU object have an input clock.
If no clock is connected, keep using the default frequency of
200 MHz used since the introduction of the 'r4k' machine in
commit 6af0bf9c7c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-12-f4bug@amsat.org>
Since not all CPU implementations use a cores use a CP0 timer
at half the frequency of the CPU, make this variable a property.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-11-f4bug@amsat.org>
The CP0 timer period is a function of the CPU frequency.
Start using the default values, which will be replaced by
properties in the next commits.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201012095804.3335117-10-f4bug@amsat.org>
Currently the CP0 timer period is fixed at 10 ns, corresponding
to a fixed CPU frequency of 200 MHz (using half the speed of the
CPU).
In few commits we will be able to use a different CPU frequency.
In preparation, move the cp0_count_ns variable to CPUMIPSState
so we can modify it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20201012095804.3335117-9-f4bug@amsat.org>
TIMER_PERIOD value of '10 ns' can be explained looking at
commit 6af0bf9c7c3doc, where the CPU frequency is 200 MHz
and CP0 default count rate is half the frequency of the
CPU. Document that.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201012095804.3335117-8-f4bug@amsat.org>
Name variables holding nanoseconds with the '_ns' suffix.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20201012095804.3335117-7-f4bug@amsat.org>
The get_random() helper uses the CP0_Wired register, which is
unrelated to the CP0_Count register used as timer.
Commit e16fe40c87 ("Move the MIPS CPU timer in a separate file")
incorrectly moved this get_random() helper with timer specific
code. Move it back to generic CP0 helpers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-Id: <20201012095804.3335117-6-f4bug@amsat.org>
In case the guest uses a cache opcode we are not expecting,
log it to give us a chance to notice it, in case we should
actually do something.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20200813181527.22551-4-f4bug@amsat.org>
QEMU does not model caches, so there is not much to do with the
Invalidate/Writeback opcodes. Make it explicit adding a comment.
Suggested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20200813181527.22551-3-f4bug@amsat.org>
The cache operation is encoded in bits [20:18] of the instruction.
The 'op' argument of helper_cache() contains the bits [20:16].
Extract the 3 bits and parse them using a switch case. This allow
us to handle multiple cache types (the cache type is encoded in
bits [17:16]).
Previously the if() block was only checking the D-Cache (Primary
Data or Unified Primary). Now we also handle the I-Cache (Primary
Instruction), S-Cache (Secondary) and T-Cache (Terciary).
Reported-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <20200813181527.22551-2-f4bug@amsat.org>
LDC2/SDC2 opcodes have been rewritten as "load & store with offset"
group of instructions by loongson-ext ASE.
This patch add implementation of these instructions:
gslbx: load 1 bytes to GPR
gslhx: load 2 bytes to GPR
gslwx: load 4 bytes to GPR
gsldx: load 8 bytes to GPR
gslwxc1: load 4 bytes to FPR
gsldxc1: load 8 bytes to FPR
gssbx: store 1 bytes from GPR
gsshx: store 2 bytes from GPR
gsswx: store 4 bytes from GPR
gssdx: store 8 bytes from GPR
gsswxc1: store 4 bytes from FPR
gssdxc1: store 8 bytes from FPR
Details of Loongson-EXT is here:
https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1602831120-3377-5-git-send-email-chenhc@lemote.com>
LWC2 & SWC2 have been rewritten by Loongson EXT vendor ASE
as "load/store quad word" and "shifted load/store" groups of
instructions.
This patch add implementation of these instructions:
gslwlc1: similar to lwl but RT is FPR instead of GPR
gslwrc1: similar to lwr but RT is FPR instead of GPR
gsldlc1: similar to ldl but RT is FPR instead of GPR
gsldrc1: similar to ldr but RT is FPR instead of GPR
gsswlc1: similar to swl but RT is FPR instead of GPR
gsswrc1: similar to swr but RT is FPR instead of GPR
gssdlc1: similar to sdl but RT is FPR instead of GPR
gssdrc1: similar to sdr but RT is FPR instead of GPR
Details of Loongson-EXT is here:
https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1602831120-3377-4-git-send-email-chenhc@lemote.com>
[PMD: Reuse t1 on MIPS32, reintroduce t2/fp0]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
LWC2 & SWC2 have been rewritten by Loongson EXT vendor ASE
as "load/store quad word" and "shifted load/store" groups of
instructions.
This patch add implementation of these instructions:
gslq: load 16 bytes to GPR
gssq: store 16 bytes from GPR
gslqc1: load 16 bytes to FPR
gssqc1: store 16 bytes from FPR
Details of Loongson-EXT is here:
https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1602831120-3377-3-git-send-email-chenhc@lemote.com>
[PMD: Restrict t1 variable to TARGET_MIPS64, remove unused t2/fp0]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Remove function definitions via macros to achieve better code clarity.
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1602103041-32017-4-git-send-email-aleksandar.qemu.devel@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Remove function definitions via macros to achieve better code clarity.
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1602103041-32017-3-git-send-email-aleksandar.qemu.devel@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Remove function definitions via macros to achieve better code clarity.
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1602103041-32017-2-git-send-email-aleksandar.qemu.devel@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There are many spelling errors in the comments in target/mips/.
Use spellcheck to check the spelling errors.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201009064449.2336-7-zhaolichang@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl9Z9wkACgkQ+9DbCVqe
KkRbkQf9HLRDEUSy/1LqbU7ncHzgCmnlzC0MKCqn/L3e+M916naO3xhu0tbJN9Ks
nxu9irY1mGrj/gK+gJ9lr50GOvcc8XCFTpE82MisMRWWFeVRt3vYLAql7WcY0ioM
K6jMMfoVswmVetP034llQhsAt9zvFimL89kp4O4i2Mjw5shsBIPfharXnnhL4EgS
ykKmUdLWxAJPSOJJA71IAFP9UzMYfXg7/NHFK1SMVOWZjMT18aoa6YDzBpbr4KzX
4vOvgGK3tBlVuOooSew7By6iR5oBPa5GP7O9Z78osCsyvzJMPcoNxQZyvgnS0Tda
q6+/QeF9/ooDPkg5Jq6Z8EAsY0q+XA==
=PIOR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging
Various misc and testing fixes:
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
# gpg: Signature made Thu 10 Sep 2020 10:51:05 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-fixes-100920-1:
plugins: move the more involved plugins to contrib
tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True)
tests: bump avocado version
hw/i386: make explicit clearing of pch_rev_id
configure: don't enable ppc64abi32-linux-user by default
docs/system/deprecated: mark ppc64abi32-linux-user for deprecation
target/mips: simplify gen_compute_imm_branch logic
tests/meson.build: fp tests don't need CONFIG_TCG
usb-host: restrict workaround to new libusb versions
CODING_STYLE.rst: flesh out our naming conventions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
One of the Travis builds was complaining about:
qemu/include/tcg/tcg.h:437:12: error: ‘cond’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return (TCGCond)(c ^ 1);
../target/mips/translate.c:20031:13: note: ‘cond’ was declared here
TCGCond cond;
Rather than figure out exactly which one was causing the complaint I
just defaulted to TCG_COND_ALWAYS and allowed that state to double up
for the now defunct bcond_compute variable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200909112742.25730-5-alex.bennee@linaro.org>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With Makefiles that have automatically generated dependencies, you
generated includes are set as dependencies of the Makefile, so that they
are built before everything else and they are available when first
building the .c files.
Alternatively you can use a fine-grained dependency, e.g.
target/arm/translate.o: target/arm/decode-neon-shared.inc.c
With Meson you have only one choice and it is a third option, namely
"build at the beginning of the corresponding target"; the way you
express it is to list the includes in the sources of that target.
The problem is that Meson decides if something is a source vs. a
generated include by looking at the extension: '.c', '.cc', '.m', '.C'
are sources, while everything else is considered an include---including
'.inc.c'.
Use '.c.inc' to avoid this, as it is consistent with our other convention
of using '.rst.inc' for included reStructuredText files. The editorconfig
file is adjusted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
