In save_user_regs, there are two bugs where we OR in a bit number
instead of the bit, clobbering the low bits of MSR. However:
The MSR_VR and MSR_SPE bits control the availability of the insns.
If the bits were not already set in MSR, then any attempt to access
those registers would result in SIGILL.
For linux-user, we always initialize MSR to the capabilities
of the cpu. We *could* add checks vs MSR where we currently
check insn_flags and insn_flags2, but we know they match.
Also, there's a stray cut-and-paste comment in restore.
Then, do not force little-endian binaries into big-endian mode.
Finally, use ppc_store_msr for the update to affect hflags.
Which is the reason none of these bugs were previously noticed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-10-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122455.19417-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some platforms used the wrong definition of stack_t where the flags and
size fields were swapped or where the flags field had type ulong instead
of int.
Due to the presence of padding space in the structure and the prevalence
of little-endian machines this problem went unnoticed for a long time.
The type definitions have been cross-checked with the ones defined in
the Linux kernel v5.9, plus some older versions for a few architecture
that have been removed and Xilinx's kernel fork for NiosII [1].
The bsd-user headers remain unchanged as I don't know if they are wrong
or not.
[1] https://github.com/Xilinx/linux-xlnx/blob/master/arch/nios2/include/uapi/asm/signal.h
Signed-off-by: Giuseppe Musacchio <thatlemon@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <e9d47692-ee92-009f-6007-0abc3f502b97@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On ppc, in termios, c_line is after c_cc, not before .
Fixes: c218b4ede4 ("linux-user: Add missing termbits types and values definitions")
Cc: Filip.Bozuta@syrmia.com
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200830181620.422036-1-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch introduces missing target types ('target_flag_t', 'target_cc_t',
'target_speed_t') in a few 'termibts.h' header files. Also, two missing
values ('TARGET_IUTF8' and 'TARGET_EXTPROC') were also added. These values
were also added in file 'syscall.c' in bitmask tables 'iflag_tbl[]' and
'lflag_tbl[]' which are used to convert values of 'struct termios' between
target and host.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200723210233.349690-3-Filip.Bozuta@syrmia.com>
[lv: keep TARGET_NCCS definition in xtensa/termbits.h]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* mlock, munlock, mlockall, munlockall - lock and unlock memory
int mlock(const void *addr, size_t len)
int munlock(const void *addr, size_t len)
int mlockall(int flags)
int munlockall(void)
man page: https://man7.org/linux/man-pages/man2/mlock.2.html
Implementation notes:
Syscall mlockall() takes an argument that is composed of predefined values
which represent flags that determine the type of locking operation that is
to be performed. For that reason, a printing function "print_mlockall" was
stated in file "strace.list". This printing function uses an already existing
function "print_flags()" to print the "flags" argument. These flags are stated
inside an array "mlockall_flags" that contains values of type "struct flags".
These values are instantiated using an existing macro "FLAG_TARGET()" that
crates aproppriate target flag values based on those defined in files
'/target_syscall.h'. These target flag values were changed from
"TARGET_MLOCKALL_MCL*" to "TARGET_MCL_*" so that they can be aproppriately set
and recognised in "strace.c" with "FLAG_TARGET()". Value for "MCL_ONFAULT"
was added in this patch. This value was also added in "syscall.c" in function
"target_to_host_mlockall_arg()". Because this flag value was added in kernel
version 4.4, it is enwrapped in an #ifdef directive (both in "syscall.c" and
in "strace.c") as to support older kernel versions.
The other syscalls have only primitive argument types, so the
rest of the implementation was handled by stating an appropriate
printing format in file "strace.list". Syscall mlock2() is not implemented in
"syscall.c" and thus it's argument printing is not implemented in this patch.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The most interesting or most complicated part here is the syscall_nr.h
generators. In order to keep the generation logic all in meson.build,
I am adding to config_target the name of the .tbl file, and making the
generated file syscall<SUFFIX>_nr.h for input file syscall<SUFFIX>.tbl.
For architectures where the input file is not named syscall_nr.tbl,
syscall_nr.h has to be a source file; it's just a forwarder for x86
(i386/x86_64), while for MIPS64 it chooses between N32 and N64 ABIs.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
POWER9 adds scv and rfscv instructions and the system call vectored
interrupt. Linux does not support this instruction yet but it has
been tested with a modified kernel that runs on real hardware.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200507115328.789175-1-npiggin@gmail.com>
[dwg: Corrected an overlong line]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The padding that was added in 95cda4c44e was added to a union,
and so it had no effect. This fixes misalignment errors detected
by clang sanitizers for ppc64 and ppc64le.
In addition, only ppc64 allocates space for VSX registers, so do
not save them for ppc32. The kernel only has references to
CONFIG_SPE in signal_32.c, so do not attempt to save them for ppc64.
Fixes: 95cda4c44e
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200407032105.26711-1-richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Previously, the signal handler would be byte swapped if the target and
host CPU used different endianness. This would cause a SIGSEGV when
attempting to translate the opcode pointed to by the swapped address.
Thread 1 "qemu-ppc64" received signal SIGSEGV, Segmentation fault.
0x00000000600a9257 in ldl_he_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:351
351 __builtin_memcpy(&r, ptr, sizeof(r));
#0 0x00000000600a9257 in ldl_he_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:351
#1 0x00000000600a92fe in ldl_be_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:449
#2 0x00000000600c0790 in translator_ldl_swap at qemu/include/exec/translator.h:201
#3 0x000000006011c1ab in ppc_tr_translate_insn at qemu/target/ppc/translate.c:7856
#4 0x000000006005ae70 in translator_loop at qemu/accel/tcg/translator.c:102
The signal handler will be byte swapped as a result of the __get_user()
call in sigaction() if it is necessary, no additional swap is required.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200319133244.8818-1-vfazio@xes-inc.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Run scripts/update-syscalltbl.sh with linux commit 0bf999f9c5e7
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-20-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Copy syscall.tbl and syscallhdr.sh from linux/arch/ppc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
and to not generate the entry if entry point is sys_ni_syscall.
Fix ppc/signal.c to define do_sigreturn() for TARGET_ABI32.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-10-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The virtual timebase register (VTB) is a 64-bit register which
increments at the same rate as the timebase register, present on POWER8
and later processors.
The register is able to be read/written by the hypervisor and read by
the supervisor. All other accesses are illegal.
Currently the VTB is just an alias for the timebase (TB) register.
Implement the VTB so that is can be read/written independent of the TB.
Make use of the existing method for accessing timebase facilities where
by the compensation is stored and used to compute the value on reads/is
updated on writes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
[ clg: rebased on current ppc tree ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20191128134700.16091-2-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We will need a target-specific hook for adjusting registers
in the parent during clone. Add an empty inline function for
each target, and invoke it from the proper places.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-11-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We will need a target-specific hook for adjusting registers
in the parent during clone. To avoid confusion, rename the
one we have to make it clear it affects the child.
At the same time, pass in the flags from the clone syscall.
We will need them for correct behaviour for Sparc.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191106113318.10226-10-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We were incorrectly using the 64-bit AIX ABI instead of the 32-bit
SYSV ABI for setting NIP for the signal handler.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
The default CPU for pseries has been set to POWER9 by default.
We can use the same default for linux-user
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190609143521.19374-2-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Cleanup in the boilerplate that each target must define.
Replace ppc_env_get_cpu with env_archcpu. The combination
CPU(ppc_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VSX register array is a block of 64 128-bit registers where the first 32
registers consist of the existing 64-bit FP registers extended to 128-bit
using new VSR registers, and the last 32 registers are the VMX 128-bit
registers as show below:
64-bit 64-bit
+--------------------+--------------------+
| FP0 | | VSR0
+--------------------+--------------------+
| FP1 | | VSR1
+--------------------+--------------------+
| ... | ... | ...
+--------------------+--------------------+
| FP30 | | VSR30
+--------------------+--------------------+
| FP31 | | VSR31
+--------------------+--------------------+
| VMX0 | VSR32
+-----------------------------------------+
| VMX1 | VSR33
+-----------------------------------------+
| ... | ...
+-----------------------------------------+
| VMX30 | VSR62
+-----------------------------------------+
| VMX31 | VSR63
+-----------------------------------------+
In order to allow for future conversion of VSX instructions to use TCG vector
operations, recreate the same layout using an aligned version of the existing
vsr register array.
Since the old fpr and avr register arrays are removed, the existing callers
must also be updated to use the correct offset in the vsr register array. This
also includes switching the relevant VMState fields over to using subarrays
to make sure that migration is preserved.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The CPU main-loop routines for linux-user generally
call gdb_handlesig() when they're about to queue a
SIGTRAP signal. This is wrong, because queue_signal()
will cause us to pend a signal, and process_pending_signals()
will then call gdb_handlesig() itself. So the effect is that
we notify gdb of the SIGTRAP, and then if gdb says "OK,
continue with signal X" we will incorrectly notify
gdb of the signal X as well. We don't do this double-notify
for anything else, only SIGTRAP.
Remove this unnecessary and incorrect code from all
the targets except for nios2 (whose main loop is
doing something different and broken, and will be handled
in a separate patch).
This bug only manifests if the user responds to the reported
SIGTRAP using "signal SIGFOO" rather than "continue"; since
the latter is the overwhelmingly common thing to do after a
breakpoint most people won't have hit this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This allows the tests generated by debian-powerpc-user-cross
to function properly, especially tests/test-coroutine.
Technically this syscall is available to both ppc32 and ppc64,
but only ppc32 glibc actually uses it. Thus the ppc64 path is
untested.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180718200648.22529-1-richard.henderson@linaro.org>
Always use the gen_conditional_store implementation that uses
atomic_cmpxchg. Make sure and clear reserve_addr across most
interrupts crossing the cpu_loop.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
add a per target target_fcntl.h and include the generic one from them
No code change.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
Change conditional #ifdef part by #undef of the symbols
redefined for PPC relative to generic/socket.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-6-laurent@vivier.eu>
and include the file from architectures without specific definitions
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180519092956.15134-5-laurent@vivier.eu>
No code change, only move code from main.c to
ppc/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-7-laurent@vivier.eu>
Create a cpu_loop-common.h for future use by
these new files and use it in the existing
main.c
Introduce target_cpu_copy_regs():
declare the function in cpu_loop-common.h
and an empty function for each target,
to move all the cpu_loop prologues to this function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.
Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
No code change, only move code from signal.c to
ppc/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-20-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
Instead of a sequence of "#if ... #endif" move the
selection to a function in linux-user/*/target_elf.h
We can't add them in linux-user/*/target_cpu.h
because we will need to include "elf.h" to
use ELF flags with eflags, and including
"elf.h" in "target_cpu.h" introduces some
conflicts in elfload.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmbmhdosb9.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There were a number of bugs in the implementation:
- The structure alignment was wrong for 64-bit.
- Also 64-bit only does RT signals.
- On 64-bit, we need to put a pointer to the (aligned) vector registers
in the frame and use it for restoring
- We had endian bugs when saving/restoring vector registers
- My recent fixes for exception NIP broke sigreturn in user mode
causing us to resume one instruction too far.
- Add VSR second halves
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
TARGET_NR_select can have three different implementations:
1- to always return -ENOSYS
microblaze, ppc, ppc64
-> TARGET_WANT_NI_OLD_SELECT
2- to take parameters from a structure pointed by arg1
(kernel sys_old_select)
i386, arm, m68k
-> TARGET_WANT_OLD_SYS_SELECT
3- to take parameters from arg[1-5]
(kernel sys_select)
x86_64, alpha, s390x,
cris, sparc, sparc64
Some (new) architectures don't define NR_select,
4- but only NR__newselect with sys_select:
mips, mips64, sh
5- don't define NR__newselect, and use pselect6 syscall:
aarch64, openrisc, tilegx, unicore32
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Reported-by: Allan Wirth <awirth@akamai.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse
of the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
These headers all use TARGET_CPU_H as header guard symbol. Reuse of
the same guard symbol in multiple headers is okay as long as they
cannot be included together.
Since we can avoid guard symbol reuse easily, do so: use guard symbol
$target_TARGET_CPU_H for linux-user/$target/target_cpu.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Some of them use guard symbol TARGET_SYSCALL_H, but we also have
CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and
__UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl.
Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is
okay as long as they cannot be included together. The script can't
tell, so it warns.
The script dislikes the other guard symbols, too. They don't match
their file name (they should, to make guard collisions less likely),
and __UC32_SYSCALL_H__ is a reserved identifier.
Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for
linux-user/$target/target_sycall.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Currently we define a QEMU-internal errno TARGET_QEMU_ESIGRETURN
only on the MIPS and PPC targets; move this to errno_defs.h
so it is available for all architectures, and renumber it to 513.
We pick 513 because this is safe from future use as a system call return
value: Linux uses it as ERESTART_NOINTR internally and never allows that
errno to escape to userspace.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Message-id: 1441497448-32489-4-git-send-email-T.E.Baldwin99@members.leeds.ac.uk
[PMM: TARGET_ERESTARTSYS split out into preceding patch, add comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
x86, m68k, ppc, sh4 and sparc failed to enable timerfd, because they
didn't have timerfd_create system call defined. Instead QEMU
defined timerfd syscall. Checking with kernel sources, it appears
kernel developers reused timerfd syscall number with timerfd_create,
presumably since no userspace called the old syscall number.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Sync syscall numbers to match the linux v4.5-rc1 kernel.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
