Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For consistency with other devices, rename
virtio_host_{initfn,pci_info} to virtio_input_host_{initfn,info}.
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many of the current virtio-*-pci device types actually represent
3 different types of devices:
* virtio 1.0 non-transitional devices
* virtio 1.0 transitional devices
* virtio 0.9 ("legacy device" in virtio 1.0 terminology)
That would be just an annoyance if it didn't break our device/bus
compatibility QMP interfaces. With these multi-purpose device
types, there's no way to tell management software that
transitional devices and legacy devices require a Conventional
PCI bus.
The multi-purpose device types would also prevent us from telling
management software what's the PCI vendor/device ID for them,
because their PCI IDs change at runtime depending on the bus
where they were plugged.
This patch adds separate device types for each of those virtio
device flavors:
- virtio-*-pci: the existing multi-purpose device types
- Configurable using `disable-legacy` and `disable-modern`
properties
- Legacy driver support is automatically enabled/disabled
depending on the bus where it is plugged
- Supports Conventional PCI and PCI Express buses
(but Conventional PCI is incompatible with
disable-legacy=off)
- Changes PCI vendor/device IDs at runtime
- virtio-*-pci-transitional: virtio-1.0 device supporting legacy drivers
- Supports Conventional PCI buses only, because
it has a PIO BAR
- virtio-*-pci-non-transitional: modern-only
- Supports both Conventional PCI and PCI Express buses
The existing TYPE_* macros for these types will point to an
abstract base type, so existing casts in the code will keep
working for all variants.
A simple test script (tests/acceptance/virtio_version.py) is
included, to check if the new device types are equivalent to
using the `disable-legacy` and `disable-modern` options.
Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a helper for registering different flavours of virtio
devices. Convert code to use the helper, but keep only the
existing generic types. Transitional and non-transitional device
types will be added by another patch.
Acked-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Calling error_report() in a function that takes an Error ** argument
is suspicious. Convert a few that are actually warnings to
warn_report().
While there, split a warning consisting of multiple sentences to
conform to conventions spelled out in warn_report()'s contract.
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Cc: Wei Huang <wei@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181017082702.5581-5-armbru@redhat.com>
Remove those unneeded includes to speed up the compilation
process a little bit. (Continue 7eceff5b5a cleanup)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180528232719.4721-13-f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces the support for setting memory region
based host notifiers for virtio device. This is helpful when
using a hardware accelerator for a virtio device, because
hardware heavily depends on the notification, this will allow
the guest driver in the VM to notify the hardware directly.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently virtio-pci driver hardcoded 2 vectors for virtio-blk device,
for multiple I/O queues scenario, all the I/O queues will share one
interrupt vector, while here, enable multiple vectors according to
the number of I/O queues.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit introduces a new vhost-user device for block, it uses a
chardev to connect with the backend, same with Qemu virito-blk device,
Guest OS still uses the virtio-blk frontend driver.
To use it, start QEMU with command line like this:
qemu-system-x86_64 \
-chardev socket,id=char0,path=/path/vhost.socket \
-device vhost-user-blk-pci,chardev=char0,num-queues=2, \
bootindex=2... \
Users can use different parameters for `num-queues` and `bootindex`.
Different with exist Qemu virtio-blk host device, it makes more easy
for users to implement their own I/O processing logic, such as all
user space I/O stack against hardware block device. It uses the new
vhost messages(VHOST_USER_GET_CONFIG) to get block virtio config
information from backend process.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The statement being removed doesn't change anything as virtio PCI devices already
have Subsystem Vendor ID set to pci_default_sub_vendor_id (0x1af4), same as Vendor
ID. And the Virtio spec does not require the two to be equal, either:
"The PCI Subsystem Vendor ID and the PCI Subsystem Device ID MAY reflect the PCI
Vendor and Device ID of the environment (for informational purposes by the driver)."
Background:
Following the recent virtio-win licensing change, several vendors are planning to
ship their own certified version of Windows guest Virtio drivers, potentially taking
advantage of Windows Update as a distribution channel. It is therefore critical that
each vendor uses their own PCI Subsystem Vendor ID for Virtio devices to prevent
drivers from other vendors binding to it.
This would be trivially done by adding:
k->subsystem_vendor_id = ...
to virtio_pci_class_init(). Except for the problematic statement deleted by this
patch, which reverts the Subsystem Vendor ID back to 0x1af4 for legacy devices for
no good reason.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.
Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
The modern bar is accessed now via yet another address space created just
for that purpose and it does not really need FlatView and dispatch tree
as it has a single memory region so it is just a waste of memory. Things
get even worse when there are dozens or hundreds of virtio-pci devices -
since these address spaces are global, changing any of them triggers
rebuilding all address spaces.
This replaces indirect accesses to the modern BAR with a simple lookup
and direct calls to memory_region_dispatch_read/write.
This is expected to save lots of memory at boot time after applying:
[Qemu-devel] [PULL 00/32] Misc changes for 2017-09-22
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following devices support both PCI Express and Conventional
PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS
flag and/or conditional pcie_endpoint_cap_init() calls:
* vfio-pci (is_express=1, but legacy PCI handled by
vfio_populate_device())
* vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize())
* pvscsi (is_express=0, but PCIe handled by pvscsi_realize())
* virtio-pci (is_express=0, but PCIe handled by
virtio_pci_dc_realize(), and additional legacy PCI code at
virtio_pci_realize())
* base-xhci (is_express=1, but pcie_endpoint_cap_init() call
is conditional on pci_bus_is_express(dev->bus)
* Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the
other hybrid devices
Cc: Dmitry Fleytman <dmitry@daynix.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the 'modern_state' part of virtio-pci to modern migration
macros.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Learn to compile out vhost-user (net, scsi & upcoming users). Keep it
enabled by default on non-win32, that is assumed to be POSIX. Fail if
trying to enable it on win32.
When trying to make a vhost-user netdev, it gives the following error:
-netdev vhost-user,id=foo,chardev=chr-test: Parameter 'type' expects a netdev backend type
And similar error with the HMP/QMP monitors.
While at it, rename CONFIG_VHOST_NET_TEST CONFIG_VHOST_USER_NET_TEST
since it's a vhost-user specific variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Old kvm.ko versions only supported a tiny number of ioeventfds so
virtio-pci avoids ioeventfds when kvm_has_many_ioeventfds() returns 0.
Do not check kvm_has_many_ioeventfds() when KVM is disabled since it
always returns 0. Since commit 8c56c1a592
("memory: emulate ioeventfd") it has been possible to use ioeventfds in
qtest or TCG mode.
This patch makes -device virtio-blk-pci,iothread=iothread0 work even
when KVM is disabled.
I have tested that virtio-blk-pci works under TCG both with and without
iothread.
This patch fixes qemu-iotests 068, which was accidentally merged early
despite the dependency on ioeventfd.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170628184724.21378-7-stefanha@redhat.com
Message-id: 20170615163813.7255-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit introduces a vhost-user device for SCSI. This is based
on the existing vhost-scsi implementation, but done over vhost-user
instead. It also uses a chardev to connect to the backend. Unlike
vhost-scsi (today), VMs using vhost-user-scsi can be live migrated.
To use it, start Qemu with a command line equivalent to:
qemu-system-x86_64 \
-chardev socket,id=vus0,path=/tmp/vus.sock \
-device vhost-user-scsi-pci,chardev=vus0,bus=pci.0,addr=...
A separate commit presents a sample application linked with libiscsi to
provide a backend for vhost-user-scsi.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <1488479153-21203-4-git-send-email-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make Power Management State flag writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make several Link Control Register flags writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the virtio devices are PCI Express, make error-enabling flags
writable to respect the PCIe spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't reset proxy->vqs[].{num|desc[]|avail[]|used[]}. This means if
a driver enable the vq without setting vq address after reset. The old
addresses were leaked. Fixing this by resetting modern vq meta data
during device reset.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit
96a8821d21. Previous patch is a better
solution which does not require a strict order between virtio and IOMMU.
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit c611c76417 ("virtio: add MemoryListener to cache ring
translations") registers a memory listener to dma_as. This may not
work when IOMMU is enabled: dma_as(bus_master_as) were initialized in
pcibus_machine_done() after virtio_realize(). This will cause a
segfault. Fixing this by using pci_device_iommu_address_space()
instead to make sure address space were initialized at this time.
With this fix, IOMMU device were required to be initialized before any
virtio-pci devices.
Fixes: c611c76417 ("virtio: add MemoryListener to cache ring translations")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
msix_init() reports errors with error_report(), which is wrong when
it's used in realize(). The same issue was fixed for msi_init() in
commit 1108b2f. In order to make the API change as small as possible,
leave the return value check to later patch.
For some devices(like e1000e, vmxnet3, nvme) who won't fail because of
msix_init's failure, suppress the error report by passing NULL error
object.
Bonus: add comment for msix_init.
CC: Jiri Pirko <jiri@resnulli.us>
CC: Gerd Hoffmann <kraxel@redhat.com>
CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Hannes Reinecke <hare@suse.de>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current migration code cannot handle some data structures such as
QTAILQ in qemu/queue.h. Here we extend the signatures of put/get
in VMStateInfo so that customized handling is supported. put now
will return int type.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com>
Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
virtio core has code to revert queue number
to maximum on reset. Drop TODO to add that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio-net-pci does not enable ioeventfd for historical reasons (and
nobody ever checked whether it should be revisited). Note that other
backends do enable ioeventfd for virtio-net.
However, it has a major effect on performance. On Windows, throughput is
_multiplied_ by 2 or 3 on TCP_STREAM (on small packets it is "only" a 30%
improvement) and a little less so on TCP_MAERTS albeit still very much
statistically significant. Latency also has a single digit improvement.
This is not visible when using vhost, which forces ioeventfd=on, but it
is substantial without vhost. In addition, also on Windows and with the
RHEL 7.3 kernel, APICv seems to slow down virtio-net performance a bit,
but the penalty with this patch goes from -25% to -7%.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches enable the Address Translation Service support for virtio
pci devices. This is needed for a guest visible Device IOTLB
implementation and will be required by vhost device IOTLB API
implementation for intel IOMMU.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, all virtio devices bypass IOMMU completely. This is because
address_space_memory is assumed and used during DMA emulation. This
patch converts the virtio core API to use DMA API. This idea is
- introducing a new transport specific helper to query the dma address
space. (only pci version is implemented).
- query and use this address space during virtio device guest memory
accessing when iommu platform (VIRTIO_F_IOMMU_PLATFORM) was enabled
for this device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch fixes a cross-version migration regression introduced
by commit d1b4259f ("virtio-bus: Plug devices after features are
negotiated").
The problem is encountered when host's vhost backend does not support
VIRTIO_F_VERSION_1, and migration is initiated from a v2.7 or prior
machine with virtio-pci modern capabilities enabled to a v2.8 machine.
In this case, modern capabilities get exposed to the guest by the source,
whereas the target will detect version 1 is not supported so will only
expose legacy capabilities.
The problem is fixed by introducing a new "x-ignore-backend-features"
property, which is set in v2.7 and prior compatibility modes. Doing this,
v2.7 machine keeps its broken behaviour (enabling modern while version
is not supported), and newer machines will behave correctly.
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-id: 20161214163035.3297-1-maxime.coquelin@redhat.com
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will be needed once dataplane will be able to set it outside
the big QEMU lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Legacy features are those that transitional devices only
expose on the legacy interface.
Allow different ones per device class.
Cc: qemu-stable@nongnu.org # dependency for the next patch
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This will be used to forbid iothread configuration when the
proxy does not allow using ioeventfd. To simplify the implementation,
change the direction of the ioeventfd_disabled callback too.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_started
and ioeventfd_set_started callback. The only difference is
in how virtio-ccw handles an error---it doesn't disable
ioeventfd forever anymore. It was the only backend to do
so, and if desired this behavior should be implemented in
virtio-bus.c.
Instead of ioeventfd_started, the ioeventfd_assign callback now
determines whether the virtio bus supports host notifiers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_set_disabled
callback.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid "tricking" virtio-blk-dataplane into thinking that ioeventfd will be
available when it is not. This bug has always been there, but it will break
TCG+ioeventfd=on once the dataplane code will be always used when ioeventfd=on.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
the bar index names are much similar to the bar memory regions,
distinguish them to improve the code readability.
Signed-off-by: Chen Fan <fan.chen@easystack.cn>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, devices are plugged before features are negotiated.
If the backend doesn't support VIRTIO_F_VERSION_1, the transport
needs to rewind some settings.
This is the case for CCW, for which a post_plugged callback had
been introduced, where max_rev field is just updated if
VIRTIO_F_VERSION_1 is not supported by the backend.
For PCI, implementing post_plugged would be much more
complicated, so it needs to know whether the backend supports
VIRTIO_F_VERSION_1 at plug time.
Currently, nothing is done for PCI. Modern capabilities get
exposed to the guest even if VIRTIO_F_VERSION_1 is not supported
by the backend, which confuses the guest.
This patch replaces existing post_plugged solution with an
approach that fits with both transports.
Features negotiation is performed before ->device_plugged() call.
A pre_plugged callback is introduced so that the transports can
set their supported features.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> [ccw]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Implement the new virtio sockets device for host<->guest communication
using the Sockets API. Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.
The vsock device must be given a CID (host-wide unique address):
# qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...
For more information see:
http://qemu-project.org/Features/VirtioVsock
[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
!legacy && !modern is shorter than !(legacy || modern).
I also perfer this (less ()s) as a matter of taste.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Without presuming if we got there because of a user mistake or some
more subtle bug in the tooling, it really does not make sense to
implement a non-functional device.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently each VQ Notification Virtio Capability is allocated
on a different page. The idea is to enable split drivers within
guests, however there are no known plans to do that.
The allocation will result in a 8MB BAR, more than various
guest firmwares pre-allocates for PCI Bridges hotplug process.
Reserve 4 bytes per VQ by default and add a new parameter
"page-per-vq" to be used with split drivers.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIO MR registration should use size from the correct notify struct.
Doesn't affect any visible behaviour because the field values are the
same (both are 4).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable transitional virtio devices by default.
Enable virtio-1.0 for devices plugged into
PCIe ports (Root ports or Downstream ports).
Using the virtio-1 mode will remove the limitation
of the number of devices that can be attached to a machine
by removing the need for the IO BAR.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In the past, we are doing gsi route commit for each irqchip route
update. This is not efficient if we are updating lots of routes in the
same time. This patch removes the committing phase in
kvm_irqchip_update_msi_route(). Instead, we do explicit commit after all
routes updated.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Changing the original MSIMessage parameter in kvm_irqchip_add_msi_route
into the vector number. Vector index provides more information than the
MSIMessage, we can retrieve the MSIMessage using the vector easily. This
will avoid fetching MSIMessage every time before adding MSI routes.
Meanwhile, the vector info will be used in the coming patches to further
enable gsi route update notifications.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert to new interface.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Actually fixes linux not finding virtio 1.0 device virtqueues after
reboot. Which is new I think, any chance linux kernel virtio code
became more strict in 4.3?
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Tested-by: Fam Zheng <famz@redhat.com>
Since guest_mask_notifier can not be used in vhost-user mode due
to buffering implied by unix control socket, force
use_mask_notifier on virtio devices of vhost-user interfaces, and
send correct callfd to the guest at vhost start.
Using guest_notifier_mask function in vhost-user case may
break interrupt mask paradigm, because mask/unmask is not
really done when returning from guest_notifier_mask call, instead
message is posted in a unix socket, and processed later.
Add an option boolean flag 'use_mask_notifier' to disable the use
of guest_notifier_mask in virtio pci.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
In 1811e64 'hw/virtio: Add PCIe capability to virtio devices', the
QEMU_PCI_CAP_EXPRESS capability was added to virtio's pci_dev, within
'virtio_pci_realize' - the pci device object realization method.
This occurs to late, as 'pci_qdev_realize' (DeviceClass.realize of
TYPE_PCI_DEVICE) has already been called, without knowing that the
device instance is indeed an "express" instance, thus allocating
insufficient pci config space.
As a result, device may crash upon attempt to write to the PCIE config
space.
Fix, by arming the QEMU_PCI_CAP_EXPRESS capability early in virtio-pci's
own DeviceClass realize method.
This also makes code cleaner, as 'virtio_pci_realize' may now access the
'pci_is_express' predicate when needed.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
The virtio devices are converted to PCI-Express
if they are plugged into a PCI-Express bus and
the 'modern' protocol is enabled.
Devices plugged directly into the Root Complex as
Integrated Endpoints remain PCI.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Guest always get zero when reading queue_enable. This violates
spec. Fixing this by setting the queue_enable to true during any guest
writing and setting it to zero during reset.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to use mmio for notification. This could be slow on some arch
(e.g on x86 without EPT). So this patch introduces pio bar and a pio
notification cap for modern device. This ability is enabled through
property "modern-pio-notify" for virtio pci devices and was disabled
by default. Management can enable when it thinks it was needed.
Benchmarks shows almost no obvious difference compared to legacy
device on machines without ept. Thanks Wenli Quan <wquan@redhat.com>
for the benchmarking.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use data match eventfd for 1.0 notification currently. This could
be slow since software decoding is needed for mmio exit. To speed this
up, we can switch to use zero length mmio eventfd for 1.0 notification
since we can examine the queue index directly from the writing
address. KVM kernel module can utilize this by registering it to fast
mmio bus which could be as fast as pio on ept capable machine when
fast mmio is supported by host kernel.
Lots of improvements were seen on a ept capable machine:
Guest RX:(TCP)
size/session/+throughput%/+cpu%/-+per cpu%/
64/1/+1.6807%/[-16.2421%]/[+21.3984%]/
64/2/+0.6091%/[-11.0187%]/[+13.0678%]/
64/4/+0.0553%/[-5.9768%]/[+6.4155%]/
64/8/+0.1206%/[-4.0057%]/[+4.2984%]/
256/1/-0.0031%/[-10.1166%]/[+11.2517%]/
256/2/-0.5058%/[-6.1656%]/+6.0317%]/
...
Guest TX:(TCP)
size/session/+throughput%/+cpu%/-+per cpu%/
64/1/[+18.9183%]/-0.2823%/[+19.2550%]/
64/2/[+13.5714%]/[+2.2675%]/[+11.0533%]/
64/4/[+13.1070%]/[+2.1817%]/[+10.6920%]/
64/8/[+13.0426%]/[+2.0887%]/[+10.7299%]/
256/1/[+36.2761%]/+6.3434%/[+28.1471%]/
...
1024/1/[+44.8873%]/+2.0811%/[+41.9335%]/
...
1024/4/+0.0228%/[-2.2044%]/[+2.2774%]/
...
16384/2/+0.0127%/[-5.0346%]/[+5.3148%]/
...
65535/1/[+0.0062%]/[-4.1183%]/[+4.3017%]/
65535/2/+0.0004%/[-4.2311%]/[+4.4185%]/
65535/4/+0.0107%/[-4.6106%]/[+4.8446%]/
65535/8/-0.0090%/[-5.5178%]/[+5.8306%]/
Latency:(TCP_RR)
size/session/+transaction rate%/+cpu%/-+per cpu%/
64/1/[+6.5248%]/[-9.2882%]/[+17.4322%]/
64/25/[+11.0854%]/[+0.8000%]/[+10.2038%]/
64/50/[+12.1076%]/[+2.4627%]/[+9.4131%]/
256/1/[+5.3677%]/[+10.5669%]/-4.7024%/
256/25/[+5.6402%]/-0.8962%/[+6.5955%]/
256/50/[+5.9685%]/[+1.7766%]/[+4.1188%]/
4096/1/+0.2508%/[-10.4941%]/[+12.0047%]/
4096/25/[+1.8533%]/-0.0273%/+1.8812%/
4096/50/[+1.2156%]/-1.4134%/+2.6667%/
Notes: data with '[]' is the one whose significance is greater than 95%.
Thanks Wenli Quan <wquan@redhat.com> for the benchmarking.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't migrate the followings fields for virtio-pci:
uint32_t dfselect;
uint32_t gfselect;
uint32_t guest_features[2];
struct {
uint16_t num;
bool enabled;
uint32_t desc[2];
uint32_t avail[2];
uint32_t used[2];
} vqs[VIRTIO_QUEUE_MAX];
This will confuse driver if migrating during initialization. Solves
this issue by:
- introduce transport specific callbacks to load and store extra
virtqueue states.
- add a new subsection for virtio to migrate transport specific modern
device state.
- implement pci specific callbacks.
- add a new property for virtio-pci for whether or not to migrate
extra state.
- compat the migration for 2.4 and elder machine types
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In-kernel ITS emulation on ARM64 will require to supply requester IDs.
These IDs can now be retrieved from the device pointer using new
pci_requester_id() function.
This patch adds pci_dev pointer to KVM GSI routing functions and makes
callers passing it.
x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c
also made passing PCI device pointer instead of NULL for consistency with
the rest of the code.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CONFIG_LINUX is off, devices "virtio-keyboard-device",
"virtio-mouse-device", "virtio-tablet-device" and
"virtio-input-host-device" aren't compiled in, yet
"virtio-keyboard-pci", "virtio-mouse-pci", "virtio-tablet-pci" and
"virtio-input-host-pci" still are. Attempts to introspect them crash,
e.g.
$ qemu-system-x86_64 -device virtio-tablet-pci,help
**
ERROR:/work/armbru/qemu/qom/object.c:333:object_initialize_with_type: assertion failed: (type != NULL)
Broken in commit 710e2d9 and commit 006a5ed.
Fix by compiling the "virtio-FOO-pci" exactly when compiling the
"virtio-FOO-device": compile "virtio-keyboard-device",
"virtio-mouse-device", "virtio-tablet-device" regardless of
CONFIG_LINUX, and compile "virtio-input-host-pci" only for
CONFIG_LINUX.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <1444320700-26260-3-git-send-email-armbru@redhat.com>
And do not issue an error_report in that case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the utility function pow2ceil() for rounding up to the next
largest power of 2, rather than inline calculation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1437741192-20955-3-git-send-email-peter.maydell@linaro.org
Each memory_region_add_subregion must be paired with
memory_region_del_subregion.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
NOTIFY_ON_EMPTY, ANY_LAYOUT and BAD are only valid on the legacy
interface.
Hide them from modern guests.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVo6kaAAoJECgfDbjSjVRpEvcH/jiNHGHD+AzFSJ6+vcKH8MHY
GVyWxvnFimyusnv74c7nwTsRGjRycKCPFy8GN/ZX+VWpIpPwK9mysBQ97zM45xeM
T+w1eT4zXafZESr6coAaUu6AvPnVPmsx2im6j5LxBnyIzj41D7dydOM0dU/OHOSI
gUS2DlhqqRPqkB2LscIrkkCmiWpizxTACzZzrko+AuTZ6YVTOEWcnRps9gqR+MWF
o24uppNPIkkmKoWBbXEiTfTqy7rcWydCb/BiM0UMo2cTOeXESNiaQNbKL2ED8K5d
187sL9XCkBrImh4NOFMy4ZKsJ7Uy9zg+zpk03XbjMF+7S155Fcacp2ahDtuCoDA=
=DITH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio: fixes for 2.4
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon Jul 13 13:03:38 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: fix reuse of pc-i440fx-2.4 in pc-i440fx-2.3
Revert "virtio-net: enable virtio 1.0"
virtio-pci: don't crash on illegal length
qdev: fix 64 bit properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some guests seem to access cfg with an illegal length value.
It's worth fixing them but debugging is easier if
qemu does not crash.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most notably, this includes the TCO support for ICH: the last feature for 2.4
as we are entering the hard freeze.
Bugfixes only from now on.
virtio pci also gained cfg access capability - arguably a bugfix
since virtio spec makes it mandatory, but it's a big patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVnO/3AAoJECgfDbjSjVRp6lAH/2RAlzoopHDNMCj5r3wHygnA
WD1rjugftcQNJ5HkL1Oe9heQnjUcx4jdaskrTyP8vElY1zheGPYYqtPYjMB3Kfsu
fIQUhjhU6lKjF+0Q9QeyOyz9uvHWgTwtiQsHdFj+fsw7qMpiiADgGmlXoin01ZF9
yGaGZ5GcLNEHXGWyzEpKOml1UxtMFZRe649KV1tqLBoOSLdw+c3SzrGvKYjUtGnG
luMHPAJcKS7khSTyCVJN8un6SjbC/aB22mlh7TgxeNBANsGJVCH09lLCmczkIKAJ
73sut/+2f2aS9qGaSJiI5ElENDhSlWlSjNG/x4dp07fvurxpojde+bYS9veSo3c=
=cQ0D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio,pci: fixes and updates
Most notably, this includes the TCO support for ICH: the last feature for 2.4
as we are entering the hard freeze.
Bugfixes only from now on.
virtio pci also gained cfg access capability - arguably a bugfix
since virtio spec makes it mandatory, but it's a big patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Jul 8 10:40:07 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
tco-test: fix up config accesses and re-enable
virtio fix cfg endian-ness for BE targets
virtio-pci: implement cfg capability
virtio: define virtio_pci_cfg_cap in header.
pcie: Set the "link active" in the link status register
pci_regs.h: import from linux
virtio_net: reuse constants from linux
hw/i386/pc: don't carry FDC from pc_basic_device_init() to pc_cmos_init()
hw/i386/pc: reflect any FDC @ ioport 0x3f0 in the CMOS
hw/i386/pc: factor out pc_cmos_init_floppy()
ich9: implement strap SPKR pin logic
tests: add testcase for TCO watchdog emulation
ich9: add TCO interface emulation
acpi: split out ICH ACPI support
Revert "dataplane: allow virtio-1 devices"
dataplane: fix cross-endian issues
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
address_space_rw assumes data is in target format
and byte-swaps it if target is BE and device is LE.
Use fixed-endian LE APIs instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
spec says we must, so let's do it!
Note: the implementation is incorrect for BE targets.
Will fix with a patch on top, not a big deal now as
the only user is seabios, used on x86 only.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Anticipating for the introduction of new add/remove functions taking
a qemu_irq parameter, let's rename existing ones with a gsi suffix.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
=6WvB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
Fix glib_subprocess test
hw/pci-bridge: format special OFW unit address for PXB host
hw/core: explicit OFW unit address callback for SysBusDeviceClass
hw/pci-bridge: disable SHPC in PXB
hw/pci-bridge: introduce "shpc" property
hw/pci: introduce shpc_present() helper function
hw/pci-bridge: add macro for "msi" property
hw/pci-bridge: add macro for "chassis_nr" property
hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
add pci-bridge-seat
pc: cleanup and convert TMP ACPI device description to AML API
MAINTAINERS: add ACPI entry
vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
balloon: add a feature bit to let Guest OS deflate balloon on oom
qdev: fix OVERFLOW_BEFORE_WIDEN
virito-pci: fix OVERRUN problem
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows to assign host input devices to the guest:
qemu -device virtio-input-host-pci,evdev=/dev/input/event<nr>
The guest gets exclusive access to the input device, so be careful
with assigning the keyboard if you have only one connected to your
machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move properties from virtio-*-pci to virtio-*-device.
Also make better use of QOM and attach common properties
to the abstract parent classes (virtio-input-device and
virtio-input-pci-device).
Switch the hid device instance init functions over to use
virtio_instance_init_common, so we get the properties of the
virtio device aliased properly to the virtio pci proxy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Overrunning array "proxy->guest_features" of 2 4-byte
elements at element index 2 (byte offset 8) using index
"proxy->gfselect" (which evaluates to 2). Normally, the
Linux kernel driver just read/write '0' or '1' as the
"proxy->gfselect" values, so using '<' instead of '=<' to
make coverity happy and avoid potential harm.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds virtio-pci support for the emulated virtio-input
devices. Using them is as simple as adding "-device virtio-tablet-pci"
to your command line. If you want add multiple devices but don't want
waste a pci slot for each you can compose a multifunction device this way:
qemu -device virtio-keyboard-pci,addr=0d.0,multifunction=on \
-device virtio-tablet-pci,addr=0d.1,multifunction=on
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds the virtio-pci support bits for virtio-input-device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Initialize the modern bar and the VirtIOPCIRegion fields early, in
realize. Also add a size field to VirtIOPCIRegion and variables for
pci bars to VirtIOPCIProxy.
This allows virtio-pci subclasses to change things before the
device_plugged callback applies them. virtio-vga will use that to
arrange regions in a way that virtio-vga is compatible to both stdvga
(in vga mode) and virtio-gpu-pci (in pci mode).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the three struct virtio_pci_caps are identical,
lets drop two of them ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also fill offset and length automatically,
from VirtIOPCIRegion->offset and region size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add function to map modern virtio regions.
Add offset to VirtIOPCIRegion.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add init function for the modern pci regions,
move over the init code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now just place the MemoryRegion there,
following patches will add more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, during host notifier set. We only add eventfd for legacy
bar, this is not correct since:
- Non-transitional device does not have legacy bar, so qemu will crash
since proxy->bar was not initialized.
- Modern device uses modern bar and notify cap to notify the device,
we should add eventfd for proxy->notify.
So this patch fixes the above two issues by adding eventfd based on
whether legacy or modern device were supported.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds variables for the pci bars (to get rid of the magic
numbers in the code) and moves the modern virtio bar to region 4 so
regions 2+3 are kept free. virtio-vga wants use them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_PCI_FLAG_DISABLE_LEGACY and VIRTIO_PCI_FLAG_DISABLE_MODERN
for VirtIOPCIProxy->flags. Also add properties for them. They can be
used to disable modern (virtio 1.0) or legacy (virtio 0.9) modes.
By default only legacy is advertized, modern will be turned on by
default once all remaining spec compilance issues are addressed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
virtio 1.0 config space is in LE format for all
devices, use modern wrappers when accessed through
the 1.0 BAR.
Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This is somewhat functional. With this, and linux driver from my tree,
I was able to use virtio net as virtio 1.0 device for light browsing.
At the moment, dataplane and vhost code is
still missing.
Based on Cornelia's virtio 1.0 patchset:
Date: Thu, 11 Dec 2014 14:25:02 +0100
From: Cornelia Huck <cornelia.huck@de.ibm.com>
To: virtualization@lists.linux-foundation.org, qemu-devel@nongnu.org
Cc: rusty@rustcorp.com.au, thuth@linux.vnet.ibm.com, mst@redhat.com,
Cornelia Huck <cornelia.huck@de.ibm.com>
Subject: [PATCH RFC v6 00/20] qemu: towards virtio-1 host support
Message-Id: <1418304322-7546-1-git-send-email-cornelia.huck@de.ibm.com>
which is itself still missing some core bits.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
