According to $GCC/gcc/config/rs6000/rs6000-c.c _ARCH_PPC is the
ubiquitous define which should be used to test whether gcc targets
PowerPC, on 64bit platforms _ARCH_PPC64 will be also defined.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6301 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
shortly after an IRQ has been raised, env->exception_index will still be set
to EXCP_IRQ when cpu_io_recompile calls cpu_resume_from_signal.
This causes qemu to repeat the IRQ trap, with disasterous consequences.
I suspect this "works" most of the time because linux tends to drop back to
svc mode before doing actual IRQ processing, and be fairly
tolerant of spurious IRQ traps.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6100 c046a42c-6fe2-441c-8c8c-71466251a162
SVM specifies that the V_IRQ mask is only to be removed, if the
interrupt that is to be delivered actually is delivered.
As of the SVM rewrite, this mask is always unmasked when the main cpu
loop is processed, leaving a corner case where calling the interrupt
handler causes a #PF. In that case (booting Linux / starting gfxboot)
the current implementation tells the VMM the interrupt is taken, even
though it is not.
This patch modifies the VIRQ unmasking to occur after do_interrupt,
making gfxboot work again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6008 c046a42c-6fe2-441c-8c8c-71466251a162
This switches cpu_break/watchpoint_* to TAILQ wrappers, simplifying the
code and also fixing a use after release issue in
cpu_break/watchpoint_remove_all.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5799 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows to hook into the delivery of EXCP_DEBUG so that other
use beyond guest debugging becomes possible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5745 c046a42c-6fe2-441c-8c8c-71466251a162
When one watchpoint is hit, others might have triggered as well. To
support users of the watchpoint API which need to detect such cases,
the BP_WATCHPOINT_HIT flag is introduced and maintained.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5744 c046a42c-6fe2-441c-8c8c-71466251a162
This patch refactors the way the CPU state is handled that is associated
with a TB. The basic motivation is to move more arch specific code out
of generic files. Specifically the long #ifdef clutter in tb_find_fast()
has to be overcome in order to avoid duplicating it for the gdb
watchpoint fixes (patch "Restore pc on watchpoint hits").
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5736 c046a42c-6fe2-441c-8c8c-71466251a162
as macros should be avoided when possible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5735 c046a42c-6fe2-441c-8c8c-71466251a162
We don't need to use cpu_loop_exit() because we never use the
condition codes so everything can be folded into a single case.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5669 c046a42c-6fe2-441c-8c8c-71466251a162
Commit #5620 revealed an issue of the SSTEP_NOIRQ masking that was
applied on all interrupt sources (including internal ones) when single
stepping through the guest. Due to that commit, we now ended up in an
infinite loop when CPU_INTERRUPT_EXIT was pending on SSTEP resume. That
was due to #5620 eating all TBs while CPU_INTERRUPT_EXIT is pending, but
SSTEP_NOIRQ preventing CPU_INTERRUPT_EXIT to be processed.
What SSTEP_NOIRQ should actually do is to block the delivery of all
external, guest visible interrupts. With the fix below applied, single
stepping now works again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5643 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds very basic KVM support. KVM is a kernel module for Linux that
allows userspace programs to make use of hardware virtualization support. It
current supports x86 hardware virtualization using Intel VT-x or AMD-V. It
also supports IA64 VT-i, PPC 440, and S390.
This patch only implements the bare minimum support to get a guest booting. It
has very little impact the rest of QEMU and attempts to integrate nicely with
the rest of QEMU.
Even though this implementation is basic, it is significantly faster than TCG.
Booting and shutting down a Linux guest:
w/TCG: 1:32.36 elapsed 84% CPU
w/KVM: 0:31.14 elapsed 59% CPU
Right now, KVM is disabled by default and must be explicitly enabled with
-enable-kvm. We can enable it by default later when we have had better
testing.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162
cpu_interrupt might be called while translating the TB, but before it
is linked into a potentially infinite loop and becomes env->current_tb.
Currently this can (and does) cause huge problems only when using
dyntick clock, with other (periodic) clocks host_alarm_handler will
eventually be executed resulting in a call to cpu_interrupt which will
reset the recursion of running TB and the damage is "only" latency.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5620 c046a42c-6fe2-441c-8c8c-71466251a162
* break 8 sets ERP to the current insn.
* First shot at S flag single-stepping.
* Make it easier to use the local disasm.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5445 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds check for all SH4 instructions which are
executed only in privileged mode.
(Shin-ichiro KAWASAKI)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5224 c046a42c-6fe2-441c-8c8c-71466251a162
* Dont flush the entire qemu tlb when the $pid changes. Instead we go through
the guests TLB and choose entries that need to be flushed.
* Add env->dslot and handle delayslots at pageboundaries.
* Remove some unused code.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4450 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows the qemu backend debugger to single step an
instruction without running the hardware interrupts.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4391 c046a42c-6fe2-441c-8c8c-71466251a162
* Support both the I and D MMUs and improve the accuracy of the MMU model.
* Handle the automatic user/kernel stack pointer switching when leaving or entering user mode.
* Move the CCS evaluation into helper funcs.
* Make sure user-mode cannot change flags only writeable in kernel mode.
* More conversion of the translator into TCG.
* Handle exceptions while in a delayslot.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4299 c046a42c-6fe2-441c-8c8c-71466251a162
* Clean up the interrupt handling a bit.
* Connect some NOR flash to the test board.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4055 c046a42c-6fe2-441c-8c8c-71466251a162
allowing support of more than 2 mmu access modes.
Add backward compatibility is_user variable in targets code when needed.
Implement per target cpu_mmu_index function, avoiding duplicated code
and #ifdef TARGET_xxx in softmmu core functions.
Implement per target mmu modes definitions. As an example, add PowerPC
hypervisor mode definition and Alpha executive and kernel modes definitions.
Optimize PowerPC case, precomputing mmu_idx when MSR register changes
and using the same definition in code translation code.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3384 c046a42c-6fe2-441c-8c8c-71466251a162
move all PowerPC specific code into target-ppc/helper.c to avoid polluting
the common code in cpu-exec.c. This makes implementation of new features
(ie embedded PowerPC timers, critical interrupts, ...) easier.
This also avoid hardcoding the IRQ callback in the OpenPIC controller,
making it more easily reusable and allowing cascading.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2542 c046a42c-6fe2-441c-8c8c-71466251a162
