Commit Graph

14530 Commits

Author SHA1 Message Date
Pierre Morel
a9718ef000 virtio dataplane: adapt dataplane for virtio Version 1
Let dataplane allocate different region for the desc/avail/used
ring regions.
Take VIRTIO_RING_F_EVENT_IDX into account to increase the used/avail
rings accordingly.

[Fix 32-bit builds by changing 16lx format specifier to HWADDR_PRIx.
--Stefan]

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Message-id: 1441625636-23773-1-git-send-email-pmorel@linux.vnet.ibm.com
(changed __virtio16 into uint16_t,
 map descriptor table and available ring read-only)
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-12 11:16:45 +01:00
Stefan Hajnoczi
fc73548e44 virtio-blk: use blk_io_plug/unplug for Linux AIO batching
The raw-posix block driver implements Linux AIO batching so multiple
requests can be submitted with a single io_submit(2) system call.
Batching is currently only used by virtio-scsi and
virtio-blk-data-plane.

Enable batching for regular virtio-blk so the number of io_submit(2)
system calls is reduced for workloads with queue depth > 1.

In 4KB random read performance tests with queue depth 32, the CPU
utilization on the host is reduced by 9.4%.  The fio job is as follows:

  [global]
  bs=4k
  ioengine=libaio
  iodepth=32
  direct=1
  sync=0
  time_based=1
  runtime=30
  clocksource=gettimeofday
  ramp_time=5

  [job1]
  rw=randread
  filename=/dev/vdb
  size=4096M
  write_bw_log=fio
  write_iops_log=fio
  write_lat_log=fio
  log_avg_msec=1000

This benchmark was run on an raw image on LVM.  The disk was an SSD
drive and -drive cache=none,aio=native was used.

Tested-by: Pradeep Surisetty <psuriset@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
2015-10-12 09:21:10 +01:00
Kevin O'Connor
5ec911c30f sdhci: Pass drive parameter to sdhci-pci via qdev property
Commit 19109131 disabled the sdhci-pci support because it used
drive_get_next().  This patch reenables sdhci-pci and changes it to
pass the drive via a qdev property - for example:
 -device sdhci-pci,drive=drive0 -drive id=drive0,if=sd,file=myimage

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-12 09:21:10 +01:00
Peter Maydell
8be6e623a2 trivial patches for 2015-10-08
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWFp75AAoJEL7lnXSkw9fbImgIALGEo20bKy2X624iPgTePuPb
 e34TjoRoB7s3rZ2SrVCIZCAsSKPtt+qQcGmJxt1YUtW0yD32aDJWQ3mm7EQTtjc+
 6dNZF5eI0322YPMePzAb1SvEc+T4b1otUS/wxENnA4D8s0lBVn1L47Ajt2E8/SP7
 rv0XTUnzwc5s4qjNNUqidvrSvmYqj5DhMh3veSb+FDm3DSKlB3Z1eq3yx0+g2ghR
 zsa2cUnX/6y26paeMqCMiFOAWSqQa80TBjgDyRiul2jrPeaM/As2Cr657MKugvi9
 4vMg9CqmLiwerTkicv5kOsUFAetdLCuvnqNqol3DFRxJ+4bbOp3VQccrBXWtZY0=
 =QRsk
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-10-08' into staging

trivial patches for 2015-10-08

# gpg: Signature made Thu 08 Oct 2015 17:51:05 BST using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"

* remotes/mjt/tags/pull-trivial-patches-2015-10-08:
  tests: Unique test path for /string-visitor/output
  linux-user: Remove type casts to union type
  linux-user: Use g_new() & friends where that makes obvious sense
  rocker: Use g_new() & friends where that makes obvious sense
  .travis.yml: Run make check for all targets, not just some
  hw: char: Remove unnecessary variable
  hw: timer: Remove unnecessary variable
  qapi: add missing @
  MAINTAINERS: Add NSIS file for W32, W64 hosts
  target-ppc: Remove unnecessary variable
  target-microblaze: Remove unnecessary variable
  s/cpu_get_real_ticks/cpu_get_host_ticks/
  pc: check for underflow in load_linux
  pci-assign: do not include sys/io.h
  block/ssh: remove dead code
  imx_serial: Generate interrupt on tx empty if enabled
  sdhci: Change debug prints to compile unconditionally
  sdhci: use PRIx64 for uint64_t type
  Add .dir-locals.el file to configure emacs coding style

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-09 10:45:09 +01:00
Markus Armbruster
778358d0a8 rocker: Use g_new() & friends where that makes obvious sense
g_new(T, n) is neater than g_malloc(sizeof(T) * n).  It's also safer,
for two reasons.  One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.

This commit only touches allocations with size arguments of the form
sizeof(T).  Same Coccinelle semantic patchas in commit b45c03f.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Shraddha Barke
65cb2a14ca hw: char: Remove unnecessary variable
Compress lines and remove the variable.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Shraddha Barke
bf5f78efed hw: timer: Remove unnecessary variable
Compress lines and remove the variable.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:47 +03:00
Christopher Covington
4a7428c5a7 s/cpu_get_real_ticks/cpu_get_host_ticks/
This should help clarify the purpose of the function that returns
the host system's CPU cycle count.

Signed-off-by: Christopher Covington <cov@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
ppc portion
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:01 +03:00
Paolo Bonzini
ec5fd40264 pc: check for underflow in load_linux
If (setup_size+1)*512 is small enough, kernel_size -= setup_size can allocate
a huge amount of memory.  Avoid that.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:01 +03:00
Paolo Bonzini
16033ba577 pci-assign: do not include sys/io.h
This file does not exist on bionic libc and the functions it defines
are in fact not used by pci-assign.c.  Remove it.

Reported-by: Houcheng Lin <houcheng@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:01 +03:00
Guenter Roeck
dc1442204a imx_serial: Generate interrupt on tx empty if enabled
Generate an interrupt if the tx buffer is empty and the tx empty interrupt
is enabled. This fixes a problem seen when running a Linux image since
Linux commit 55c3cb1358e ("serial: imx: remove unneeded imx_transmit_buffer()
from imx_start_tx()"). Linux now waits for the tx empty interrupt before
starting to send data, causing transmit stalls until there is an interrupt
for another reason.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:01 +03:00
Sai Pavan Boddu
7af0fc994e sdhci: Change debug prints to compile unconditionally
Conditional compilation hides few type mismatch warnings, fix it to
compile unconditionally.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:01 +03:00
Sai Pavan Boddu
be9c5ddeab sdhci: use PRIx64 for uint64_t type
Fix compile time warnings, because of type mismatch for unsigned long
long type.

Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08 19:46:01 +03:00
Peter Maydell
1d27b91723 VFIO updates 2015-10-07
- Change platform device IRQ setup sequence for compatibility
    with upcoming IRQ forwarding (Eric Auger)
  - Extensions to support vfio-pci devices on spapr-pci-host-bridge
    (David Gibson) [clang problem patch dropped]
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWFTqsAAoJECObm247sIsiXo8P/1hLkZGQ7pqHXj6M+UmkM9ur
 Px6t+ZnFbhyf3tiU8Z0KoB7u+du73Z8E7swKqqcaal68j/zFhNtYC6ACSSGhOsDo
 ROR+/fg6HIJUeKkwVNKTBN5l8s6W6QLxPc/JLWYPI4YwIJj0GEGJNjoebUrcsjtU
 pCkezdMo0Wy2rDJzg5KWeSoZqoXIiWHo5MccgRsWQLf2dVAc6P8T5iNQFqSqy2N/
 1lVLNSoneCWcD+Erw7HjgwP83jwnZWKjPScJvckzXznuHa02k1wSN/ipNf2ENcrz
 C/jXcPczmEsUDpKu6ujtPj2/+X2F+Pz+C+rJsWfgUKo+iiwNqfziuZX0GEd+BqWD
 g8VxvS6+eZ6V6NN2Mhyofdp3hlWI4bcee5ORxAFv4CQjKV3etVSlkFhMARDwmw5V
 h38vvrEDNRxd6DyMR29mgUZ4wIf8u9wicpuQc4CevebPGUzXmMk3KH2hfvD1BJlt
 /SmmZMEkQTBbYQaEChX/op0H0ype+RkoVEs2TYxlGBL0LPkY2FOCCvEbPYCweuVf
 UNFjx4kj1NK4/CvwsXrFfzORp5T21XFWOakbWL+vGM06fBMo6oRmKoMRmZJxmCvT
 k5dBFazeSV5m9t2XS6GQeJoenMzVo9o3s2hS+WhjQqjVgLcC7HbPF+gjcQekRlB1
 wsc5badWI35H+Uio6kqF
 =MzWe
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20151007.0' into staging

VFIO updates 2015-10-07

 - Change platform device IRQ setup sequence for compatibility
   with upcoming IRQ forwarding (Eric Auger)
 - Extensions to support vfio-pci devices on spapr-pci-host-bridge
   (David Gibson) [clang problem patch dropped]

# gpg: Signature made Wed 07 Oct 2015 16:30:52 BST using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20151007.0:
  vfio: Allow hotplug of containers onto existing guest IOMMU mappings
  memory: Allow replay of IOMMU mapping notifications
  vfio: Record host IOMMU's available IO page sizes
  vfio: Check guest IOVA ranges against host IOMMU capabilities
  vfio: Generalize vfio_listener_region_add failure path
  vfio: Remove unneeded union from VFIOContainer
  hw/vfio/platform: do not set resamplefd for edge-sensitive IRQS
  hw/vfio/platform: change interrupt/unmask fields into pointer
  hw/vfio/platform: irqfd setup sequence update

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-08 16:50:34 +01:00
Peter Maydell
fb6345f452 NUMA queue, 2015-10-06
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJWFCbGAAoJECgHk2+YTcWmBzMP/2/W7UF14KQsuCxz8bYrzkQ5
 AFR7hmlHB0286lkORb+SutG3kf+cUXzuGYjpLkfGWUQhkViHYv1GNSxLsKU4ZnsE
 XiScuq5A158a0avxlucq2RQiNwhGhjZ+NTgGppbI6x9SYbnSVrA9FdLeC11h+9ER
 dm/fsw8fU8L6m4D4BmkNdUJo1vXJbpiZ9BYGVHrkrSPf+DvM1pr8SpgOsrc5Zi6m
 M2dLcfcd0jDUo8B9tzW0BeeMEN2GhW9BwNEQT110yXoyosRljvckzqMZUY+wv3yn
 IFk8xdjma2PO2EO0KN4sDuOeXfc99ysBKhQgE81yK7E02sNFio2XVgfASZQYyHRy
 YKyBqlNRNgZIy2tj41NLjPs2H0svEAa4eYnxbqHhgvwe2erx65iBjPCSt3kTGm4P
 lIywoo2LJI64c/iMti5Dxf4Y5BXTHgwPXwe/2p3YZX0/UboBrQ9+yOaOBq1gx4ey
 g1fxv3Wjj9X13la0GvbecRrrerwoHjY4AEwYTUSD7Cqtx/NF9eeR1Jh/NuvD6CG7
 dwx/9WxM1clxD6AE2aYo+V+hiG7j0YVsfxgSq/+zD6ZATZfZN62iA0/u1Z7H+VYp
 jX5vy51xQHcNlh5w7cYpOsmvoZLSEgZqjntimZYaE3yXob6vN3NfN3Ncx2Hpr76y
 Rpu9o4YRXfW3I9oJNP0w
 =EPRT
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ehabkost/tags/numa-pull-request' into staging

NUMA queue, 2015-10-06

# gpg: Signature made Tue 06 Oct 2015 20:53:42 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"

* remotes/ehabkost/tags/numa-pull-request:
  pc-dimm: Fail realization for invalid nodes in non-NUMA config

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-08 11:28:17 +01:00
Bharata B Rao
32532f215c pc-dimm: Fail realization for invalid nodes in non-NUMA config
pc_dimm_realize() validates the NUMA node to which memory hotplug is
being performed only in case of NUMA configuration. Include a check to
fail for invalid nodes in case of non-NUMA configuration too.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-06 16:51:08 -03:00
Peter Maydell
eed2df6785 s390: fixes
Some fixes all over the place:
 - ccw bios and gcc 5.1 (avoid floating point ops)
 - properly print vector registers
 - sclp and sclp-event-facility no longer hang on object_unref(object_new(T))
 - better name for io_subsystem_reset
 
 One feature
 - the gdb server now exposes several virtualization specific register
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJWE6BoAAoJEBF7vIC1phx89zUP/RohjexrA9GZ93mKlP8SdmUO
 FP4MmsaInv7PTIfZeUnG1sa0n9CbodwiPypnzlvOedbibQagnZwI+pnpa/W/SxJQ
 M6Wh+vamUFEfXcNC4/6zOJJvKUQUBYMDVgbUuDxTgCne4V9yCgVzs8NPWBIfFCVC
 3bzUxinzG+mTD6eQLNNrpTa7KSuKhNS1g0hsIId92XAr7iQ3H2SSDCr9w+HOR3eN
 Gqr3JdCOVOwqNcrsyfpJK3NYaooqcSbAlIpfNoGaxrc3DldEjBTfr20LLHKoPhcM
 ibEAOUi1dtdBlZofo8/OBvHeeR0MPHmCjV9CTxymmgABPWhpIIxEG16vgy8ijZ5R
 QcA6D4QlALvE+kDwXGtHfEOZ0rHMHmzD9RUtzLL5ALG4UWM06qrwqtMeHUuAxInU
 lRPaEV9J+1fXzQzH708DjRAncOOdTCVUv0SfoYa3VR4wo0ZMx6W/K/FXc/h4q4Jm
 6CztpK03HSly+gCkd6gcdZ908Se3OcaB0DTScVvUdVKCUdvM53Uo7L5jI9wk399a
 xj/+W4XO9lkLEFnZKAKopS4ea7cgV8oIqUuMpCuZnCiOQCCKpZgrUgJAxvaLomnv
 4he7fbiScmMEhUGVI0AvMmbMYCbGd4gVoHm5/kMvslV5w5o898uIVlTrvNf3Z6Fv
 9jZSLDLVoHeU+ESOjJy+
 =STtO
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20151006' into staging

s390: fixes

Some fixes all over the place:
- ccw bios and gcc 5.1 (avoid floating point ops)
- properly print vector registers
- sclp and sclp-event-facility no longer hang on object_unref(object_new(T))
- better name for io_subsystem_reset

One feature
- the gdb server now exposes several virtualization specific register

# gpg: Signature made Tue 06 Oct 2015 11:20:24 BST using RSA key ID B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"

* remotes/borntraeger/tags/s390x-20151006:
  s390x: rename io_subsystem_reset -> subsystem_reset
  s390x/info registers: print vector registers properly
  s390x: set missing parent for hotplug and quiesce events
  s390x/gdb: expose virtualization specific registers
  pc-bios/s390-ccw: avoid floating point operations

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-06 16:32:16 +01:00
David Gibson
508ce5eb00 vfio: Allow hotplug of containers onto existing guest IOMMU mappings
At present the memory listener used by vfio to keep host IOMMU mappings
in sync with the guest memory image assumes that if a guest IOMMU
appears, then it has no existing mappings.

This may not be true if a VFIO device is hotplugged onto a guest bus
which didn't previously include a VFIO device, and which has existing
guest IOMMU mappings.

Therefore, use the memory_region_register_iommu_notifier_replay()
function in order to fix this case, replaying existing guest IOMMU
mappings, bringing the host IOMMU into sync with the guest IOMMU.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:39:47 -06:00
David Gibson
7a140a57c6 vfio: Record host IOMMU's available IO page sizes
Depending on the host IOMMU type we determine and record the available page
sizes for IOMMU translation.  We'll need this for other validation in
future patches.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:38:41 -06:00
David Gibson
3898aad323 vfio: Check guest IOVA ranges against host IOMMU capabilities
The current vfio core code assumes that the host IOMMU is capable of
mapping any IOVA the guest wants to use to where we need.  However, real
IOMMUs generally only support translating a certain range of IOVAs (the
"DMA window") not a full 64-bit address space.

The common x86 IOMMUs support a wide enough range that guests are very
unlikely to go beyond it in practice, however the IOMMU used on IBM Power
machines - in the default configuration - supports only a much more limited
IOVA range, usually 0..2GiB.

If the guest attempts to set up an IOVA range that the host IOMMU can't
map, qemu won't report an error until it actually attempts to map a bad
IOVA.  If guest RAM is being mapped directly into the IOMMU (i.e. no guest
visible IOMMU) then this will show up very quickly.  If there is a guest
visible IOMMU, however, the problem might not show up until much later when
the guest actually attempt to DMA with an IOVA the host can't handle.

This patch adds a test so that we will detect earlier if the guest is
attempting to use IOVA ranges that the host IOMMU won't be able to deal
with.

For now, we assume that "Type1" (x86) IOMMUs can support any IOVA, this is
incorrect, but no worse than what we have already.  We can't do better for
now because the Type1 kernel interface doesn't tell us what IOVA range the
IOMMU actually supports.

For the Power "sPAPR TCE" IOMMU, however, we can retrieve the supported
IOVA range and validate guest IOVA ranges against it, and this patch does
so.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:38:13 -06:00
David Gibson
ac6dc3894f vfio: Generalize vfio_listener_region_add failure path
If a DMA mapping operation fails in vfio_listener_region_add() it
checks to see if we've already completed initial setup of the
container.  If so it reports an error so the setup code can fail
gracefully, otherwise throws a hw_error().

There are other potential failure cases in vfio_listener_region_add()
which could benefit from the same logic, so move it to its own
fail: block.  Later patches can use this to extend other failure cases
to fail as gracefully as possible under the circumstances.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:37:02 -06:00
David Gibson
ee0bf0e59b vfio: Remove unneeded union from VFIOContainer
Currently the VFIOContainer iommu_data field contains a union with
different information for different host iommu types.  However:
   * It only actually contains information for the x86-like "Type1" iommu
   * Because we have a common listener the Type1 fields are actually used
on all IOMMU types, including the SPAPR TCE type as well

In fact we now have a general structure for the listener which is unlikely
to ever need per-iommu-type information, so this patch removes the union.

In a similar way we can unify the setup of the vfio memory listener in
vfio_connect_container() that is currently split across a switch on iommu
type, but is effectively the same in both cases.

The iommu_data.release pointer was only needed as a cleanup function
which would handle potentially different data in the union.  With the
union gone, it too can be removed.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:36:08 -06:00
Eric Auger
a5b39cd3f6 hw/vfio/platform: do not set resamplefd for edge-sensitive IRQS
In irqfd mode, current code attempts to set a resamplefd whatever
the type of the IRQ. For an edge-sensitive IRQ this attempt fails
and as a consequence, the whole irqfd setup fails and we fall back
to the slow mode. This patch bypasses the resamplefd setting for
non level-sentive IRQs.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:30:12 -06:00
Eric Auger
a22313deca hw/vfio/platform: change interrupt/unmask fields into pointer
unmask EventNotifier might not be initialized in case of edge
sensitive irq. Using EventNotifier pointers make life simpler to
handle the edge-sensitive irqfd setup.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:30:12 -06:00
Eric Auger
58892b447f hw/vfio/platform: irqfd setup sequence update
With current implementation, eventfd VFIO signaling is first set up and
then irqfd is setup, if supported and allowed.

This start sequence causes several issues with IRQ forwarding setup
which, if supported, is transparently attempted on irqfd setup:
IRQ forwarding setup is likely to fail if the IRQ is detected as under
injection into the guest (active at irqchip level or VFIO masked).

This currently always happens because the current sequence explicitly
VFIO-masks the IRQ before setting irqfd.

Even if that masking were removed, we couldn't prevent the case where
the IRQ is under injection into the guest.

So the simpler solution is to remove this 2-step startup and directly
attempt irqfd setup. This is what this patch does.

Also in case the eventfd setup fails, there is no reason to go farther:
let's abort.

Signed-off-by: Eric Auger <eric.auger@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2015-10-05 12:30:12 -06:00
Zhu Guihua
dfeb8679db icc_bus: drop the unused files
ICC bus impl has been droped, so all icc related files are not useful
any more; delete them.

Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02 16:22:02 -03:00
Chen Fan
46232aaacb cpu/apic: drop icc bus/bridge
After CPU hotplug has been converted to BUS-less hot-plug infrastructure,
the only function ICC bus performs is to propagate reset to LAPICs. However
LAPIC could be reset by registering its reset handler after all device are
initialized.
Do so and drop ~30LOC of not needed anymore ICCBus related code.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02 16:22:02 -03:00
Zhu Guihua
ae50c55a09 x86: use new method to correct reset sequence
During reset some devices (such as hpet, rtc) might send IRQ to APIC
which changes APIC's state from default one it's supposed to have
at machine startup time.
Fix this by resetting APIC after devices have been reset to cancel
any changes that qemu_devices_reset() might have done to its state.

Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02 16:22:02 -03:00
Chen Fan
8d42d2d32b apic: move APIC's MMIO region mapping into APIC
When ICC bus/bridge is removed, APIC MMIO will be left
unmapped since it was mapped into system's address space
indirectly by ICC bridge.
Fix it by moving mapping into APIC code, so it would be
possible to remove ICC bus/bridge code later.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02 16:22:02 -03:00
Eduardo Habkost
5114e84222 target-i386: Convert kvm_default_*features to property/value pairs
Convert the kvm_default_features and kvm_default_unset_features arrays
into a simple list of property/value pairs that will be applied to
X86CPU objects when using KVM.

Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02 16:22:01 -03:00
Chen Fan
ed256144cd cpu: Introduce X86CPUTopoInfo structure for argument simplification
In order to simplify arguments of function, introduce a new struct
named X86CPUTopoInfo.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02 16:22:01 -03:00
Igor Mammedov
aa8580cddf pc: memhp: force gaps between DIMM's GPA
mapping DIMMs non contiguously allows to workaround
virtio bug reported earlier:
http://lists.nongnu.org/archive/html/qemu-devel/2015-08/msg00522.html
in this case guest kernel doesn't allocate buffers
that can cross DIMM boundary keeping each buffer
local to a DIMM.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-02 17:04:32 +03:00
Igor Mammedov
df0acded19 memhp: extend address auto assignment to support gaps
setting gap to TRUE will make sparse DIMM
address auto allocation, leaving gaps between
a new DIMM address and preceeding existing DIMM.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-02 17:04:32 +03:00
David Hildenbrand
d9f090ec77 s390x: rename io_subsystem_reset -> subsystem_reset
According to the Pop:
"Subsystem reset operates only on those elements in the configuration
which are not CPUs".

As this is what we actually do, let's simply rename the function.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-6-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-02 13:31:52 +02:00
David Hildenbrand
7059384c7e s390x: set missing parent for hotplug and quiesce events
Existing code missed to set a parent for the quiesce and hotplug event.
While this didn't matter in practise, new introspection APIs basically now
do an object_unref(object_new(T)), which loops forever.

When trying to remove the event facility bus, the code tries to
unparent all childs on the bus, so they are properly deleted and therefore removed.
As object_unparent() on these child devices doesn't work, as there is no parent,
we loop forever.

Let's fix this by adding the event facility as a parent. Also switch from
object_initialize to object_new, so the only valid reference is in fact the
parent property. This makes it more obvious when the device (state) is actually
gone (and how the reference counting works).

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-4-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-02 13:31:52 +02:00
Richard Henderson
0d583647a7 virtio: Notice when the system doesn't support MSIx at all
And do not issue an error_report in that case.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-01 16:16:52 +03:00
Eduardo Habkost
798595075b pc: Add a comment explaining why pc_compat_2_4() doesn't exist
pc_compat_2_4() doesn't exist, and we shouldn't create one. Add a
comment explaining why the function doesn't exist and why pc_compat_*()
functions are deprecated.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-01 16:16:52 +03:00
Jason Wang
0cf33fb6b4 virtio-net: correctly drop truncated packets
When packet is truncated during receiving, we drop the packets but
neither discard the descriptor nor add and signal used
descriptor. This will lead several issues:

- sg mappings are leaked
- rx will be stalled if a lots of packets were truncated

In order to be consistent with vhost, fix by discarding the descriptor
in this case.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-01 16:16:52 +03:00
Jason Wang
29b9f5efd7 virtio: introduce virtqueue_discard()
This patch introduces virtqueue_discard() to discard a descriptor and
unmap the sgs. This will be used by the patch that will discard
descriptor when packet is truncated.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-01 16:16:52 +03:00
Jason Wang
ce31746157 virtio: introduce virtqueue_unmap_sg()
Factor out sg unmapping logic. This will be reused by the patch that
can discard descriptor.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Andrew James <andrew.james@hpe.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-01 16:16:52 +03:00
Peter Maydell
9e071429e6 * First batch of MAINTAINERS updates
* IOAPIC fixes (to pass kvm-unit-tests with -machine kernel_irqchip=off)
 * NBD API upgrades from Daniel
 * strtosz fixes from Marc-André
 * improved support for readonly=on on scsi-generic devices
 * new "info ioapic" and "info lapic" monitor commands
 * Peter Crosthwaite's ELF_MACHINE cleanups
 * docs patches from Thomas and Daniel
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJWBSAEAAoJEL/70l94x66DeL4H/21YR4GWCqo30f+W5kx24ZNo
 by8H2kdZmWKRr/La1JlAReki9GCP1U8Q0cYC8V885gHLKcahWS/75UKwNbw0OSyg
 2jj4uREc645TTFAvV5kQ+uAw9F/dchvkXylrVgOoUPipfmYibXY8JLu9AcVnZi6H
 X5Rvpqo4Uhp2cbRG7rYWrwgpNL+VZmKc8LDdqdlXrkjjanhuAYO2E9NBKaE+xJQQ
 FHcpkV92iSZFEZ0CB535BTIdNdDM/ae6bw1As27EF10YBTfneCQNazSeh13pLO2n
 lHit2GZr2VeTSBrPkPsItToY/Gw38duVZK4QM5/wSkHBzyeUJY0ltQrf53veYfk=
 =uc+I
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* First batch of MAINTAINERS updates
* IOAPIC fixes (to pass kvm-unit-tests with -machine kernel_irqchip=off)
* NBD API upgrades from Daniel
* strtosz fixes from Marc-André
* improved support for readonly=on on scsi-generic devices
* new "info ioapic" and "info lapic" monitor commands
* Peter Crosthwaite's ELF_MACHINE cleanups
* docs patches from Thomas and Daniel

# gpg: Signature made Fri 25 Sep 2015 11:20:52 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (52 commits)
  doc: Refresh URLs in the qemu-tech documentation
  docs: describe the QEMU build system structure / design
  typedef: add typedef for QemuOpts
  i386: interrupt poll processing
  i386: partial revert of interrupt poll fix
  ppc: Rename ELF_MACHINE to be PPC specific
  i386: Rename ELF_MACHINE to be x86 specific
  alpha: Remove ELF_MACHINE from cpu.h
  mips: Remove ELF_MACHINE from cpu.h
  sparc: Remove ELF_MACHINE from cpu.h
  s390: Remove ELF_MACHINE from cpu.h
  sh4: Remove ELF_MACHINE from cpu.h
  xtensa: Remove ELF_MACHINE from cpu.h
  tricore: Remove ELF_MACHINE from cpu.h
  or32: Remove ELF_MACHINE from cpu.h
  lm32: Remove ELF_MACHINE from cpu.h
  unicore: Remove ELF_MACHINE from cpu.h
  moxie: Remove ELF_MACHINE from cpu.h
  cris: Remove ELF_MACHINE from cpu.h
  m68k: Remove ELF_MACHINE from cpu.h
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25 21:52:30 +01:00
Peter Maydell
8bfbbb4bcb VFIO updates 2015-09-25
- Remove use of g_malloc0_n for glib2.22 compat
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWBX0cAAoJECObm247sIsidV0P/1A1hgFW+iFl2sA5kesfV3DG
 FSiPTEI0xF+lDJM498i31QatvVAAMYgk6qK7CWyRCodfWhCntAUxAPoUkeKsEP+k
 cVo7qOeO+PUCFwVdykuxWRTsVVkuhjcOZZ0UylWs9A5G2biIncTzum8mAycTshqz
 AWqk52pQMTAgkV5bD/ZAH1IMp9NX1Ipc2mngtXubhYDZPCVq2ERHbr2TqTj27Qzj
 9f1tdeD0VOy6JvQqu2nFqDMrDaVtjMAUldg473UfNTNNaNUdvbr4+o88+oSrNdke
 U7tdLwV/ani7FLUI1dadezbvGlx64EOO8Pa7FO5ZrjmS+IHVMBTVlPLxNd5ljHdJ
 e9Ei+lsgH6nGnAWuL7b1HI6VUS1dExahqZtA6NGG2DxmYqcKQDH49bDUNmSuFcFj
 ViQAeU11+ZpEm3IgvvQl3ZYuSTuQwzfH7xc73v5nWp9m7YNPVyqPerxqOgHxxzeG
 +v9wSi+9Tt4SoEMzyABr4s8WwRUY7YWXPtF077/E4Jk24xNpJaDoP/A1bQ0JORee
 gVlKOYJA+Smy5sQmLss5h5iQ9zun97Ad+WwTA2QdCLeKA7p6x+NCtUUk+7aH4lVv
 doood1Xx2Seic9LDOy9G8h2TN8gMG870gcbPUfEgxfEnLwSHLOnW7w+X5xLSoFjr
 u/8eIeLuPQLMeNf11ocj
 =BLF9
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20150925.0' into staging

VFIO updates 2015-09-25

 - Remove use of g_malloc0_n for glib2.22 compat

# gpg: Signature made Fri 25 Sep 2015 17:58:04 BST using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20150925.0:
  vfio/pci: Remove use of g_malloc0_n() from quirks

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25 21:11:12 +01:00
Peter Maydell
690b286fef Remove muldiv64() by using period instead of frequency
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWBVIdAAoJEPMMOL0/L748BXUP/2j+TRnsaU/gMHoL2IGP78BK
 LLLOL7yyV8ZrsrOFvyv8IW0DtpldoYsvObty/bNAr0iq+QwqwGWn9Gw4im5DtIkN
 s7e1WcxLgFHHcT1QLa70MUjjVtRrflTmcW9TVIW79PQ+HsCqnb7EmFZ96HxzH3zN
 YM93eBT6cJV3axsLwJsE82igCXsLo3raKGNb0jt8b6/XwMoR3iUb1Kgs2dJXZUJw
 TYPtHv7sJpQiLQY8Y8o4EjyyjdFuWPVeIfokgPahoOdVA1PSCx6Qh8o+FV1GZ+nF
 vmAr7Jolri6tdbMgRWtIgQQs2YSvPNIUEOYTXVu/4p287JGZPNU5790V2aIczERc
 gEPTqjI6w1AYy8/yMlO3WpfFxXWZH6ZsNBmxCmhH/mczA2dx3DzDlyI7SofQsCHW
 +81U6GSc/Ryy47C+b6m/YZNQDx3yG8rUFtY4PqCcjJwPZdSEhLEM7crC2XWJwy+0
 rg3SnVvXuE2vC/k7UHEYbnFOyVbvezUYJnigbppMilO8nfXIsyuvc7G4AT96jxbt
 4HQJT6ESGEsIToslWObJ53z3jzoAA17xp4gzkZjx7RwSofkFFIaT7jjaA/D2cxFn
 UOXZgAfde6mfg4Ak0czcBYYvm+peEjXBC+DfsBjfAcQ1dz6WSGyd3QZY0J7i9/7y
 iSNiuCE9J6Ha7XVVYzd2
 =krOI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier-misc/tags/pull-muldiv64-20150925' into staging

Remove muldiv64() by using period instead of frequency

# gpg: Signature made Fri 25 Sep 2015 14:54:37 BST using RSA key ID 3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier-misc/tags/pull-muldiv64-20150925:
  net: remove muldiv64()
  bt: remove muldiv64()
  hpet: remove muldiv64()
  arm: clarify the use of muldiv64()
  openrisc: remove muldiv64()
  mips: remove muldiv64()
  pcnet: remove muldiv64()
  rtl8139: remove muldiv64()
  i6300esb: remove muldiv64()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25 18:03:19 +01:00
Peter Maydell
cdf9818242 virtio,pc features, fixes
New features:
     vhost-user multiqueue support
     virtio-ccw virtio 1 support
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWBOxjAAoJECgfDbjSjVRpao8H/1hV55WvPXyEHB9ian+JPVEb
 pYFUcKGRO/bWMbXkqWnIBzNPrViPNQHot3zrOcoXtgnBGcuniiteGcAtqj4WEkgb
 WSa22AI1QrEPfHIkhR3sYdJAsqte/RppnFKLSDDi9TwKOGUho47OnkzJWfB+vuup
 7YM/r8YDCkckdvsvfsCwW4Fbjxv7oKSokFkkdV/NwNDocNvRSBS9iAXsQYFdS7tm
 8DIkWK63HQDY9in+fYkk8zoaXK7oZMyi3vHd2g4W0t0mGznxj9dxomrJrMo/4GWZ
 ZrnlB9R1QxpOCtoDtozelxkCnLJhEVjd8xYkGPg+xzYjrxl9aHIWjSNGhf5Q9QY=
 =5IBX
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,pc features, fixes

New features:
    vhost-user multiqueue support
    virtio-ccw virtio 1 support

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 25 Sep 2015 07:40:35 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  MAINTAINERS: add more devices to the PCI section
  MAINTAINERS: add more devices to the PC section
  vhost-user: add a new message to disable/enable a specific virt queue.
  vhost-user: add multiple queue support
  vhost: introduce vhost_backend_get_vq_index method
  vhost-user: add VHOST_USER_GET_QUEUE_NUM message
  vhost: rename VHOST_RESET_OWNER to VHOST_RESET_DEVICE
  vhost-user: add protocol feature negotiation
  vhost-user: use VHOST_USER_XXX macro for switch statement
  virtio-ccw: enable virtio-1
  virtio-ccw: feature bits > 31 handling
  virtio-ccw: support ring size changes
  virtio: ring sizes vs. reset
  pc: Introduce pc-*-2.5 machine classes
  q35: Move options common to all classes to pc_i440fx_machine_options()
  q35: Move options common to all classes to pc_q35_machine_options()
  virtio-net: unbreak self announcement and guest offloads after migration
  virtio: right size for virtio_queue_get_avail_size

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-25 16:40:05 +01:00
Laurent Vivier
fdfea124f9 bt: remove muldiv64()
Originally, timers were ticks based, and it made sense to
add ticks to current time to know when to trigger an alarm.

But since commit:

7447545 change all other clock references to use nanosecond resolution accessors

All timers use nanoseconds and we need to convert ticks to nanoseconds.

As get_ticks_per_sec() is 10^9,

    a = muldiv64(b, get_ticks_per_sec(), 100);
    y = muldiv64(x, get_ticks_per_sec(), 1000000);

can be converted to

    a = b * 10000000;
    y = x * 1000;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 14:56:22 +02:00
Laurent Vivier
0a4f9240f5 hpet: remove muldiv64()
hpet defines a clock period in femtoseconds but
then converts it to nanoseconds to use the internal
timers.

We can define the period in nanoseconds and use it
directly, this allows to remove muldiv64().

We only need to convert the period to femtoseconds
to put it in internal hpet capability register.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25 14:56:05 +02:00
Laurent Vivier
ccaf174923 openrisc: remove muldiv64()
Originally, timers were ticks based, and it made sense to
add ticks to current time to know when to trigger an alarm.

But since commit:

7447545 change all other clock references to use nanosecond resolution accessors

All timers use nanoseconds and we need to convert ticks to nanoseconds, by
doing something like:

    y = muldiv64(x, get_ticks_per_sec(), TIMER_FREQ)

where x is the number of device ticks and y the number of system ticks.

y is used as nanoseconds in timer functions,
it works because 1 tick is 1 nanosecond.
(get_ticks_per_sec() is 10^9)

But as openrisc timer frequency is 20 MHz, we can also do:

    y = x * 50; /* 20 MHz period is 50 ns */

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
2015-09-25 14:54:22 +02:00
Laurent Vivier
683dca6bd5 mips: remove muldiv64()
Originally, timers were ticks based, and it made sense to
add ticks to current time to know when to trigger an alarm.

But since commit:

7447545 change all other clock references to use nanosecond resolution accessors

All timers use nanoseconds and we need to convert ticks to nanoseconds, by
doing something like:

    y = muldiv64(x, get_ticks_per_sec(), TIMER_FREQ)

where x is the number of device ticks and y the number of system ticks.

y is used as nanoseconds in timer functions,
it works because 1 tick is 1 nanosecond.
(get_ticks_per_sec() is 10^9)

But as MIPS timer frequency is 100 MHz, we can also do:

    y = x * 10; /* 100 MHz period is 10 ns */

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-25 14:54:04 +02:00
Laurent Vivier
c6acbe861f pcnet: remove muldiv64()
Originally, timers were ticks based, and it made sense to
add ticks to current time to know when to trigger an alarm.

But since commit:

7447545 change all other clock references to use nanosecond resolution accessors

All timers use nanoseconds and we need to convert ticks to nanoseconds, by
doing something like:

    y = muldiv64(x, get_ticks_per_sec(), PCI_FREQUENCY)

where x is the number of device ticks and y the number of system ticks.

y is used as nanoseconds in timer functions,
it works because 1 tick is 1 nanosecond.
(get_ticks_per_sec() is 10^9)

But as PCI frequency is 33 MHz, we can also do:

    y = x * 30; /* 33 MHz PCI period is 30 ns */

Which is much more simple.

This implies a 33.333333 MHz PCI frequency,
but this is correct.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-25 14:53:50 +02:00
Laurent Vivier
37b9ab92f7 rtl8139: remove muldiv64()
Originally, timers were ticks based, and it made sense to
add ticks to current time to know when to trigger an alarm.

But since commit:

7447545 change all other clock references to use nanosecond resolution accessors

All timers use nanoseconds and we need to convert ticks to nanoseconds, by
doing something like:

    y = muldiv64(x, get_ticks_per_sec(), PCI_FREQUENCY)

where x is the number of device ticks and y the number of system ticks.

y is used as nanoseconds in timer functions,
it works because 1 tick is 1 nanosecond.
(get_ticks_per_sec() is 10^9)

But as PCI frequency is 33 MHz, we can also do:

    y = x * 30; /* 33 MHz PCI period is 30 ns */

Which is much more simple.

This implies a 33.333333 MHz PCI frequency,
but this is correct.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-25 14:53:29 +02:00