There is no much sense to do the check and write warning.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
to check that snapshot is available for all loaded block drivers.
The check bs != bs1 in hmp_info_snapshots is an optimization. The check
for availability of this snapshot will return always true as the list
of snapshots was collected from that image.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We should check that all inserted and not read-only images support
snapshotting. This could be made using already invented helper
bdrv_all_can_snapshot().
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
to switch to snapshot on all loaded block drivers.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
to delete snapshots from all loaded block drivers.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The patch enforces proper locking for this operation.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The check is unneccesary, we read the value at the start of the
thread, use it, and never change it. The value is checked to be
non-NULL before thread creation.
Spotted by coverity, CID 1339211
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I set current_time before the postcopy test but never use it;
(I think this was from the original version where it was time based).
Spotted by coverity, CID 1339208
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In a82d593b61 I accidentally removed the setting of
last_sent_block, put it back.
Symptoms:
Multithreaded compression only uses one thread.
Migration is a bit less efficient since it won't use 'cont' flags.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: a82d593b61
Signed-off-by: Juan Quintela <quintela@redhat.com>
Peter reported a lock error on MacOS after my a82d593b
patch.
migrate_get_current does one-time initialisation of
a bunch of variables.
migrate_init does reinitialisation even on a 2nd
migrate after a cancel.
The problem here was that I'd initialised the mutex
in migrate_get_current, and the memset in migrate_init
corrupted it.
Remove the memset and replace it by explicit initialisation
of fields that need initialising; this also turns out to be simpler
than the old code that had to preserve some fields.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: a82d593b
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Improve the text in both the qapi-schema and hmp help to point out
you need to set the postcopy-ram capability prior to issuing
migrate-start-postcopy.
Also fix the text of the migrate_start_postcopy error that
deals with capabilities.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Where the target page size is different from the host page
we special case it, but I messed up on the zero case check.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Where we have iterable, but non-postcopiable devices (e.g. htab
or block migration), complete them before forming the 'package'
but with the CPUs stopped. This stops them filling up the package.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rest of the file already use that trick. 64bit offsets make no sense in
32bit archs, but that is ram_addr_t for you.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
since commit
commit 94f5a43704
Author: Liang Li <liang.z.li@intel.com>
Date: Mon Nov 2 15:37:00 2015 +0800
migration: defer migration_end & blk_mig_cleanup
when actual .cleanup callbacks calling was removed from complete operations.
The patch fixes regression introduced by the commit above results in
100% reliable assert for virtio-scsi VM with iothreads enabled during
'virsh create-snapshot' operation:
assert(i != mr->ioeventfd_nb);
memory_region_del_eventfd
virtio_pci_set_host_notifier_internal
virtio_pci_set_host_notifier
virtio_scsi_dataplane_start
virtio_scsi_handle_cmd
virtio_queue_notify_vq
virtio_queue_host_notifier_read
aio_dispatch
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy detects accesses to pages that haven't been transferred yet
using userfaultfd, and it causes exceptions on pages that are 'not
present'.
Ballooning also causes pages to be marked as 'not present' when the
guest inflates the balloon.
Potentially a balloon could be inflated to discard pages that are
currently inflight during postcopy and that may be arriving at about
the same time.
To avoid this confusion, disable ballooning during postcopy.
When disabled we drop balloon requests from the guest. Since ballooning
is generally initiated by the host, the management system should avoid
initiating any balloon instructions to the guest during migration,
although it's not possible to know how long it would take a guest to
process a request made prior to the start of migration.
Guest initiated ballooning will not know if it's really freed a page
of host memory or not.
Queueing the requests until after migration would be nice, but is
non-trivial, since the set of inflate/deflate requests have to
be compared with the state of the page to know what the final
outcome is allowed to be.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Userfault doesn't work with mlock; mlock is designed to nail down pages
so they don't move, userfault is designed to tell you when they're not
there.
munlock the pages we userfault protect before postcopy.
mlock everything again at the end if mlock is enabled.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tweak the end of migration cleanup; we don't want to close stuff down
at the end of the main stream, since the postcopy is still sending pages
on the other thread.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Prior to servicing userfault requests we must ensure we've not got
huge pages in the area that might include non-transferred memory,
since a hugepage could incorrectly mark the whole huge page as present.
We mark the area as non-huge page (nhp) just before we perform
discards; the discard code now tells us to discard any areas
that haven't been sent (as well as any that are redirtied);
any already formed transparent-huge-pages get fragmented
by this discard process if they cotnain any discards.
Transparent huge pages that have been entirely transferred
and don't contain any discards are not broken by this mechanism;
they stay as huge pages.
By starting postcopy after a full precopy pass, many of the pages
then stay as huge pages; this is important for maintaining performance
after the end of the migration.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Wire up more of the handlers for the commands on the destination side,
in particular loadvm_postcopy_handle_run now has enough to start the
guest running.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The loading of a device state (during postcopy) may access guest
memory that's still on the source machine and thus might need
a page fill; split off a separate thread that handles the incoming
page data so that the original incoming migration code can finish
off the device data.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
userfaultfd is a Linux syscall that gives an fd that receives a stream
of notifications of accesses to pages registered with it and allows
the program to acknowledge those stalls and tell the accessing
thread to carry on.
We convert the requests from the kernel into messages back to the
source asking for the pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Prior to the start of postcopy, ensure that everything that will
be transferred later is a whole host-page in size.
This is accomplished by discarding partially transferred host pages
and marking any that are partially dirty as fully dirty.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
During the postcopy phase we must not call the iterate method on
precopy-only devices, since they may have done some cleanup during
the _complete call at the end of the precopy phase.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once we're in postcopy the source processors are stopped and memory
shouldn't change any more, so there's no need to look at the dirty
map.
There are two notes to this:
1) If we do resync and a page had changed then the page would get
sent again, which the destination wouldn't allow (since it might
have also modified the page)
2) Before disabling this I'd seen very rare cases where a page had been
marked dirtied although the memory contents are apparently identical
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Ensure that target pages received within a host page are in order.
This shouldn't trigger, but in the cases where the sender goes
wrong and sends stuff out of order it produces a corruption that's
really nasty to debug.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy, the destination guest is running at the same time
as it's receiving pages; as we receive new pages we must put
them into the guests address space atomically to avoid a running
CPU accessing a partially written page.
Use the helpers in postcopy-ram.c to map these pages.
qemu_get_buffer_in_place is used to avoid a copy out of qemu_file
in the case that postcopy is going to do a copy anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
postcopy_place_page (etc) provide a way for postcopy to place a page
into guests memory atomically (using the copy ioctl on the ufd).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When transmitting RAM pages, consume pages that have been queued by
MIG_RPCOMM_REQPAGE commands and send them ahead of normal page scanning.
Note:
a) After a queued page the linear walk carries on from after the
unqueued page; there is a reasonable chance that the destination
was about to ask for other closeby pages anyway.
b) We have to be careful of any assumptions that the page walking
code makes, in particular it does some short cuts on its first linear
walk that break as soon as we do a queued page.
c) We have to be careful to not break up host-page size chunks, since
this makes it harder to place the pages on the destination.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On receiving MIG_RPCOMM_REQ_PAGES look up the address and
queue the page.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add MIG_RP_MSG_REQ_PAGES command on Return path for the postcopy
destination to request a page from the source.
Two versions exist:
MIG_RP_MSG_REQ_PAGES_ID that includes a RAMBlock name and start/len
MIG_RP_MSG_REQ_PAGES that just has start/len for use with the same
RAMBlock as a previous MIG_RP_MSG_REQ_PAGES_ID
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The end of migration in postcopy is a bit different since some of
the things normally done at the end of migration have already been
done on the transition to postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rework the migration thread to setup and start postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Mark the area of RAM as 'userfault'
Start up a fault-thread to handle any userfaults we might receive
from it (to be filled in later)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we
complete migration, and we need to know which we expect to be
in to change state safely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Maintain an 'unsentmap' of pages that have yet to be sent.
This is used in the following patches to discard some set of
the pages already sent as we enter postcopy mode.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add qemu_savevm_state_complete_postcopy to complement
qemu_savevm_state_complete_precopy together with a new
save_live_complete_postcopy method on devices.
The save_live_complete_precopy method is called on
all devices during a precopy migration, and all non-postcopy
devices during a postcopy migration at the transition.
The save_live_complete_postcopy method is called at
the end of postcopy for all postcopiable devices.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
VMDescription is normally sent at the end, after all
of the devices; however that's not the end for postcopy,
so just don't send it when in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'MIGRATION_STATUS_POSTCOPY_ACTIVE' is entered after migrate_start_postcopy
'migration_in_postcopy' is provided for other sections to know if
they're in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Soon we'll be in either ACTIVE or POSTCOPY_ACTIVE when we
complete migration, and we need to know which we expect to be
in to change state safely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Once postcopy is enabled (with migrate_set_capability), the migration
will still start on precopy mode. To cause a transition into postcopy
the:
migrate_start_postcopy
command must be issued. Postcopy will start sometime after this
(when it's next checked in the migration loop).
Issuing the command before migration has started will error,
and issuing after it has finished is ignored.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Provide a check to see if the OS we're running on has all the bits
needed for postcopy.
Creates postcopy-ram.c which will get most of the other helpers we need.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Modify save_live_pending to return separate postcopiable and
non-postcopiable counts.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
MIG_CMD_PACKAGED is a migration command that wraps a chunk of migration
stream inside a package whose length can be determined purely by reading
its header. The destination guarantees that the whole MIG_CMD_PACKAGED
is read off the stream prior to parsing the contents.
This is used by postcopy to load device state (from the package)
while leaving the main stream free to receive memory pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The state of the postcopy process is managed via a series of messages;
* Add wrappers and handlers for sending/receiving these messages
* Add state variable that track the current state of postcopy
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The 'postcopy ram' capability allows postcopy migration of RAM;
note that the migration starts off in precopy mode until
postcopy mode is triggered (see the migrate_start_postcopy
patch later in the series).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy needs to have two migration streams loading concurrently;
one from memory (with the device state) and the other from the fd
with the memory transactions.
Split the core of qemu_loadvm_state out so we can use it for both.
Allow the inner loadvm loop to quit and cause the parent loops to
exit as well.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Open a return path, and handle messages that are received upon it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add 'migration_is_setup_or_active' utility function to check state.
(It gets postcopy added to it's list later on in the series)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add migrate_send_rp_message to send a message from destination to source along the return path.
(It uses a mutex to let it be called from multiple threads)
Add migrate_send_rp_shut to send a 'shut' message to indicate
the destination is finished with the RP.
Add migrate_send_rp_ack to send a 'PONG' message in response to a PING
Use it in the MSG_RP_PING handler
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two src->dest commands:
* OPEN_RETURN_PATH - To request that the destination open the return path
* PING - Request an acknowledge from the destination
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create QEMU_VM_COMMAND section type for sending commands from
source to destination. These commands are not intended to convey
guest state but to control the migration process.
For use in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The destination sets the fd to non-blocking on incoming migrations;
this also affects the return path from the destination, and thus we
need to make sure we can safely write to the return path.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy needs a method to send messages from the destination back to
the source, this is the 'return path'.
Wire it up for 'socket' QEMUFile's.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we're going to need to perform the complete phase
for postcopiable devices at a different point, start out by
renaming all of the 'complete's to make the difference obvious.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Suspend to file is very much like a migrate, and it makes life
easier if we have the Migration state available, so initialise it
in the savevm.c code for suspending.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewd-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The main RAM load loop has a call to host_from_stream_offset for
each page type that actually loads data with the same test;
factor it out before the switch.
The host = NULL is to silence a bogus gcc warning of
an unitialised in the RAM_SAVE_COMPRESS_PAGE case, it
doesn't seem to realise that host is always initialised by the if at
the top in the cases the switch takes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Useful for debugging the migration bitmap and other bitmaps
of the same format (including the sentmap in postcopy).
The bitmap is printed to stderr.
Lines that are all the expected value are excluded so the output
can be quite compact for many bitmaps.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a wrapper to change the blocking status on a QEMUFile
rather than having to use qemu_set_block(qemu_get_fd(f));
it seems best to avoid exposing the fd since not all QEMUFile's
really have one. With this wrapper we could move the implementation
down to be different on different transports.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_get_buffer always copies the data it reads to a users buffer,
however in many cases the file buffer inside qemu_file could be given
back to the caller, avoiding the copy. This isn't always possible
depending on the size and alignment of the data.
Thus 'qemu_get_buffer_in_place' either copies the data to a supplied
buffer or updates a pointer to the internal buffer if convenient.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'file' becomes confusing when you have flows in each direction;
rename to make it clear.
This leaves just the main forward direction ms->file, which is used
in a lot of places and is probably not worth renaming given the churn.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a function to find a RAMBlock by name; use it in two
of the places that already open code that loop; we've
got another use later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The vmstate_configuration is currently written
in 'qemu_savevm_state_begin', move it to
'qemu_savevm_state_header' since it's got a hard
requirement that it must be the 1st thing after
the header.
(In postcopy some 'command' sections get sent
early before the saving of the main sections
and hence before qemu_savevm_state_begin).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Just clean up code, no behavior change.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
'cleanup' seems more appropriate than 'cancel'.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
The function qemu_savevm_state_cancel is called after the migration
in migration_thread, it seems strange to 'cancel' it after completion,
rename it to qemu_savevm_state_cleanup looks better.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
Because of the patch 3ea3b7fa9af067982f34b of kvm, which introduces a
lazy collapsing of small sptes into large sptes mechanism, now
migration_end() is a time consuming operation because it calls
memroy_global_dirty_log_stop(), which will trigger the dropping of small
sptes operation and takes about dozens of milliseconds, so call
migration_end() before all the vmsate data has already been transferred
to the destination will prolong VM downtime. This operation should be
deferred after all the data has been transferred to the destination.
blk_mig_cleanup() can be deferred too.
For a VM with 8G RAM, this patch can reduce the VM downtime about 30 ms.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>al3
Reviewed-by: Amit Shah <amit.shah@redhat.com>al3
Signed-off-by: Juan Quintela <quintela@redhat.com>al3
blk_bs() will not necessarily return a non-NULL value any more (unless
blk_is_available() is true or it can be assumed to otherwise, e.g.
because it is called immediately after a successful blk_new_with_bs() or
blk_new_open()).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The coroutine files are currently referenced by the block-obj-y
variable. The coroutine functionality though is already used by
more than just the block code. eg migration code uses coroutine
yield. In the future the I/O channel code will also use the
coroutine yield functionality. Since the coroutine code is nicely
self-contained it can be easily built as part of the libqemuutil.a
library, making it widely available.
The headers are also moved into include/qemu, instead of the
include/block directory, since they are now part of the util
codebase, and the impl was never in the block/ directory
either.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Release qemu global mutex before call synchronize_rcu().
synchronize_rcu() waiting for all readers to finish their critical
sections. There is at least one critical section in which we try
to get QGM (critical section is in address_space_rw() and
prepare_mmio_access() is trying to aquire QGM).
Both functions (migration_end() and migration_bitmap_extend())
are called from main thread which is holding QGM.
Thus there is a race condition that ends up with deadlock:
main thread working thread
Lock QGA |
| Call KVM_EXIT_IO handler
| |
| Open rcu reader's critical section
Migration cleanup bh |
| |
synchronize_rcu() is |
waiting for readers |
| prepare_mmio_access() is waiting for QGM
\ /
deadlock
The patch changes bitmap freeing from direct g_free after synchronize_rcu
to free inside call_rcu.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reported-by: Igor Redko <redkoi@virtuozzo.com>
Tested-by: Igor Redko <redkoi@virtuozzo.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
CC: Anna Melekhova <annam@virtuozzo.com>
CC: Juan Quintela <quintela@redhat.com>
CC: Amit Shah <amit.shah@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Wen Congyang <wency@cn.fujitsu.com>
We were announcing the dest host's IP as our new IP a bit too soon -- if
there were errors detected after this announcement was done, the
migration is failed and the VM could continue running on the src host --
causing problems later.
Move around the qemu_announce_self() call so it's done just before the
VM is runnable.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The current migration-completed event is generated a bit too early,
which means that an eager libvirt that's ready to go as soon
as it sees the event ends up racing with the actual end of migration.
This corresponds to RH bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1271145
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
xSigned-off-by: Juan Quintela <quintela@redhat.com>
Migration has a define for MAX_THROTTLE. Update comment to clarify that this is
used for throttling transfer speed. Hopefully this will prevent it from being
confused with a guest cpu throttling entity.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Report throttle percentage in info migrate and query-migrate responses when
cpu throttling is active.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Remove traditional auto-converge static 30ms throttling code and replace it
with a dynamic throttling algorithm.
Additionally, be more aggressive when deciding when to start throttling.
Previously we waited until four unproductive memory passes. Now we begin
throttling after only two unproductive memory passes. Four seemed quite
arbitrary and only waiting for two passes allows us to complete the migration
faster.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Add migration parameters to allow the user to adjust the parameters
that control cpu throttling when auto-converge is in effect. The added
parameters are as follows:
x-cpu-throttle-initial : Initial percantage of time guest cpus are throttled
when migration auto-converge is activated.
x-cpu-throttle-increment: throttle percantage increase each time
auto-converge detects that migration is not making progress.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Split out the finding of the dirty page and all the wrap detection
into a separate function since it was getting a bit hairy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1443018431-11170-3-git-send-email-dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
[Fix comment -- Amit]
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Pull the search state for one iteration of the dirty page
search into a structure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1443018431-11170-2-git-send-email-dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442231491-23352-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This time convert the external functions:
qemu_get_buffer, qemu_peek_buffer
qemu_put_buffer and qemu_put_buffer_async
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-6-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This is a start on using size_t more in qemu-file and friends;
it fixes up QEMUFilePutBufferFunc and QEMUFileGetBufferFunc
to take size_t lengths and return ssize_t return values (like read(2))
and fixes up all the different implementations of them.
Note that I've not yet followed this deeply into bdrv_ implementations.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-5-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The code that gets run at the end of the migration process
is getting large, and I'm about to add more for postcopy.
Split it into a separate function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-3-git-send-email-dgilbert@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
RAM migration mainly works on RAMBlocks but in a few places
uses data from MemoryRegions to access the same information that's
already held in RAMBlocks; clean it up just to avoid the
MemoryRegion use.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1439463094-5394-2-git-send-email-dgilbert@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When doing migration via the QMP command xen_save_devices_state, the
current runstate is not store into the global state section. Also the
current runstate is not the one we want on the receiver side.
During migration, the Xen toolstack paused QEMU before save the devices
state. Also, the toolstack expect QEMU to autostart when the migration is
finished.
So this patch store "running" as it's current runstate.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The error checks I added used 'break' after the error, but I'm
in a switch inside the while loop, so they need to be 'goto out'.
Spotted by coverity; entries 1311368 and 1311369
Fixes: afcddefd
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1436555332-19076-1-git-send-email-dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit df4b102452 introduced global_state
section. But it only filled the state while doing migration. While
doing a savevm, we stored an empty string as state. So when we did a
loadvm, it complained that state was invalid.
Fedora 21, 4.1.1, qemu 2.4.0-rc0
> ../../configure --target-list="x86_64-softmmu"
068 2s ... - output mismatch (see 068.out.bad)
--- /home/bos/jhuston/src/qemu/tests/qemu-iotests/068.out 2015-07-08
17:56:18.588164979 -0400
+++ 068.out.bad 2015-07-09 17:39:58.636651317 -0400
@@ -6,6 +6,8 @@
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) savevm 0
(qemu) quit
+qemu-system-x86_64: Unknown savevm section or instance 'globalstate' 0
+qemu-system-x86_64: Error -22 while loading VM state
QEMU X.Y.Z monitor - type 'help' for more information
(qemu) quit
*** done
Failures: 068
Failed 1 of 1 tests
Actually, there were two problems here:
- we registered global_state too late for load_vm (fixed on another
patch on the list)
- we didn't store a valid state for savevm (fixed by this patch).
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
'strlen' is called three times in 'save_page_header', it's
inefficient.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We can want the trace event even without migration events enabled.
Reported-by: Wen Congyang <ghostwcy@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
On previous change, we changed state at post load time if it was not
running, special casing the "running" change. Now, we change any states
at the end of the migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
migration_end calls synchronize_rcu() within a critical section.
That causes a deadlock; move the call after rcu_read_unlock().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There callers work on a single BlockDriverState subtree, where using
bdrv_drain() is more accurate.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prevously, if we hotplug a device(e.g. device_add e1000) during
migration is processing in source side, qemu will add a new ram
block but migration_bitmap is not extended.
In this case, migration_bitmap will overflow and lead qemu abort
unexpectedly.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The section footers check was incorrectly checking the section_id
in the SaveStateEntry not the LoadStateEntry. These can validly be different
if the two QEMU instances have instantiated their devices in a
different order. The test only cares that we're finishing the same
section we started, and hence it's the LoadStateEntry that we care about.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We reuse the migration events from the source side, sending them on the
appropiate place.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Make check fails with events. THis is due to the parser/lexer that it
uses. Just in case that they are more broken parsers, just only send
events when there are capabilities.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We have one argument that tells us what event has happened.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We now use the helper everywhere, so no need to call this on this two
places. See on previous commit that there were a place where we missed
to mark the trace. Now all tracing is done in migrate_set_state().
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There were three places that were not using the migrate_set_state()
helper, just fix that.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It needs to be the first one and it is not optional, that is the reason
why it is opencoded. For new machine types, it is required that machine
type name is the same in both sides.
It is just done right now for pc's.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
To make sections optional, we need to do it at the beggining of the code.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This section would be sent:
a- for all new machine types
b- for old machine types if section state is different form {running,paused}
that were the only giving us troubles.
So, in new qemus: it is alwasy there. In old qemus: they are only
there if it an error has happened, basically stoping on target.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This includes a new section that for now just stores the current qemu state.
Right now, there are only one way to control what is the state of the
target after migration.
- If you run the target qemu with -S, it would start stopped.
- If you run the target qemu without -S, it would run just after migration finishes.
The problem here is what happens if we start the target without -S and
there happens one error during migration that puts current state as
-EIO. Migration would ends (notice that the error happend doing block
IO, network IO, i.e. nothing related with migration), and when
migration finish, we would just "continue" running on destination,
probably hanging the guest/corruption data, whatever.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If the number of RAMBlocks was different on the source from the
destination, QEMU would hang waiting for a disconnect on the source
and wouldn't release from that hang until the destination was manually
killed.
Mark the stream as being in error, this causes the destination to die
and the source to carry on.
(It still gets a whole bunch of warnings on the destination, and I've
not managed to complete another migration after the 1st one, still
progress).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Perform some basic (but probably not complete) sanity checking on
requests from the RDMA source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Use the order of incoming RAMBlocks from the source to record
an index number; that then allows us to sort the destination
local RAMBlock list to match the source.
Now that the RAMBlocks are known to be in the same order, this
simplifies the RDMA Registration step which previously tried to
match RAMBlocks based on offset (which isn't guaranteed to match).
Looking at the existing compress code, I think it was erroneously
relying on an assumption of matching ordering, which this fixes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA uses a hash from block offset->RAM Block; this isn't needed
on the destination, and it becomes harder to maintain after the next
patch in the series that sorts the block list.
Split the hash so that it's only generated on the source.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the next patch we remove the hash on the destination,
rdma_delete_block does two things with the hash which can be avoided:
a) The caller passes the offset and rdma_delete_block looks it up
in the hash; fixed by getting the caller to pass the block
b) The hash gets recreated after deletion; fixed by making that
conditional on the hash being initialised.
While this function is currently only used during cleanup, Michael
asked that we keep it general for future dynamic block registration
work.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We need the names of RAMBlocks as they're loaded for RDMA,
reuse a slightly modified ram_control_load_hook:
a) Pass a 'data' parameter to use for the name in the block-reg
case
b) Only some hook types now require the presence of a hook function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The 'offset' field in RDMACompress and 'current_addr' field
in RDMARegister are commented as being offsets within a particular
RAMBlock, however they appear to actually be offsets within the
ram_addr_t space.
The code currently assumes that the offsets on the source/destination
match, this change removes the need for the assumption for these
structures by translating the addresses into the ram_addr_t space of
the destination host.
Note: An alternative would be to change the fields to actually
take the data they're commented for; this would potentially be
simpler but would break stream compatibility for those cases
that currently work.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In a later patch the block name will be used to match up two views
of the block list. Keep a copy of the block name with the local block
list.
(At some point it could be argued that it would be best just to let
migration see the innards of RAMBlock and avoid the need to use
foreach).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The VMDescription section maybe after the EOF mark, the current code
does a 'qemu_get_byte' and either gets the header byte identifying the
description or an error (which it ignores). Doing the 'get' upsets
RDMA which hangs on old machine types without the VMDescription.
Just avoid reading the VMDescription if we wouldn't send it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Variable "r" going out of scope leaks the storage
it points to in line 3268.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJVetcwAAoJEJykq7OBq3PI+84IAMfkE0uCXdUbp3jZP9iVx68y
ZtHbhpnZle3bmVFBkgsF8vHWsMlxMZzr2PpAl02VXrrE6z0ScTz+GmVU2V89Y5nv
kn9DhAR4gcyKbKKgRtwjCLMoCfxsdaHTOJXfcHhsiqQP4PwdFkV6bQAymwcJegY/
ze5wKX8XqIML6yUCnhrN41pjt6NkIQoyRneLwX5ymeRLfWg23i9YOVU4Njmm9X52
kH7Xg0UuT6HTyyNER7iqwh61gQ33ETkfWd9UrHFGi7q70UJAr+cVXtzJjqnh08OU
BExph/lQfxXuivpiThvjZkPvMVqISyCrsIAXrwjhXnjqwz/3nt3i6zrfvPNNPG0=
=VdKf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into staging
# gpg: Signature made Fri Jun 12 13:57:20 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/net-pull-request:
qmp/hmp: add rocker device support
rocker: bring link up/down on PHY enable/disable
rocker: update tests using hw-derived interface names
rocker: Add support for phys name
iohandler: Change return type of qemu_set_fd_handler to "void"
event-notifier: Always return 0 for posix implementation
xen_backend: Remove unused error handling of qemu_set_fd_handler
oss: Remove unused error handling of qemu_set_fd_handler
alsaaudio: Remove unused error handling of qemu_set_fd_handler
main-loop: Drop qemu_set_fd_handler2
Change qemu_set_fd_handler2(..., NULL, ...) to qemu_set_fd_handler
tap: Drop tap_can_send
net/socket: Drop net_socket_can_send
netmap: Drop netmap_can_send
l2tpv3: Drop l2tpv3_can_send
stubs: Add qemu_set_fd_handler
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA has two data types that are named confusingly;
RDMALocalBlock (pointed to indirectly by local_ram_blocks)
RDMARemoteBlock (pointed to by block in RDMAContext)
RDMALocalBlocks, as the name suggests is a data strucuture that
represents the RDMAable RAM Blocks on the current side of the migration
whichever that is.
RDMARemoteBlocks is always the shape of the RAMBlocks on the
destination, even on the destination.
Rename:
RDMARemoteBlock -> RDMADestBlock
context->'block' -> context->dest_blocks
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Badly formatted migration streams can go undetected or produce
misleading errors due to a lock of checking at the end of sections.
In particular a section that adds an extra 0x00 at the end
causes what looks like a normal end of stream and thus doesn't produce
any errors, and something that ends in a 0x01..0x04 kind of look
like real section headers and then fail when the section parser tries
to figure out which section they are. This is made worse by the
choice of 0x00..0x04 being small numbers that are particularly common
in normal section data.
This patch adds a section footer consisting of a marker (0x7e - ~)
followed by the section-id that was also sent in the header. If
they mismatch then it throws an error explaining which section was
being loaded.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The next patch adds section footers; but we don't want to
break migration compatibility so disable them on older
machine types
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The header writing for device sections is open coded in
a few places, merge it into one.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy we need the loadvm_handlers to be used in a couple
of different instances of the loadvm loop/routine, and thus
it can't be local any more.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_peek_buffer currently copies the data it reads into a buffer,
however a future patch wants access to the buffer without the copy,
hence rework to remove the copy to the layer above.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are currently lots of pieces of incoming migration state scattered
around, and postcopy is adding more, and it seems better to try and keep
it together.
allocate MIS in process_incoming_migration_co
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
check the return value of the function it calls and error if it's non-0
Fixup qemu_rdma_init_one_block that is the only current caller,
and rdma_add_block the only function it calls using it.
Pass the name of the ramblock to the function; helps in debugging.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Split qemu_savevm_state_begin to:
qemu_savevm_state_header That writes the initial file header.
qemu_savevm_state_begin That sets up devices and does the first
device pass.
Used later in postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
and use it in loadvm_state and ram_load.
Where ever it's used, check the return and error if it failed.
Minor: ram_load was using a 257 byte array for its string, the
maximum length is 255 bytes + 0 terminator, so fix to 256
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
This way, we will put savevm global state here, instead of lots of variables.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We assign the MIGRATION_STATUS_SETUP status in two places. Just in
succession. Just remove the second one.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Qemu crashes when IPv6 address is specified for migration and access
to any RDMA uverbs device available on the system is blocked using cgroups.
Fix the crash by checking the return value of ibv_open_device routine.
Signed-off-by: Meghana Cheripady <meghana.cheripady@avagotech.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There are two places that define 'len' variable, It's OK for compiling,
but makes it difficult for reading.
Remove the local one which defined in the inside 'while' loop.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
To make changes easier, with the copy, I maintained almost all include
files. Now I remove the unnecessary ones on this patch. This compiles
on linux x64 with all architectures configured, and cross-compiles for
windows 32 and 64 bits.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If anyone feels like adding himself to the list, just sent me a patch.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For historic reasons, ram migration have been on arch_init.c. Just
split it into migration/ram.c, the same that happened with block.c.
There is only code movement, no changes altogether.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add the qmp commands to tune and query the parameters used in live
migration.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Put the three parameters related to multiple thread (de)compression
into an int array, and use an enum type to index the parameter.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The multiple compression threads can be turned on/off through
qmp and hmp interface before doing live migration.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_put_compression_data() compress the data and put it to QEMUFile.
qemu_put_qemu_file() put the data in the buffer of source QEMUFile to
destination QEMUFile.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add the code to create and destroy the multiple threads those will be
used to do data decompression. Left some functions empty just to keep
clearness, and the code will be added later.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add the code to create and destroy the multiple threads those will
be used to do data compression. Left some functions empty to keep
clearness, and the code will be added later.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We often don't need the BlockDriverState for functions
that operate on bitmaps. Remove it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-15-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This field will be set for user created dirty bitmap. Also pass in an
error pointer to bdrv_create_dirty_bitmap, so when a name is already
taken on this BDS, it can report an error message. This is not global
check, two BDSes can have dirty bitmap with a common name.
Implemented bdrv_find_dirty_bitmap to find a dirty bitmap by name, will
be used later when other QMP commands want to reference dirty bitmap by
name.
Add bdrv_dirty_bitmap_make_anon. This unsets the name of dirty bitmap.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As part of commit e325b49a32,
order in which resources are destroyed was changed for fixing
a seg fault. Due to this change, CQ will never get destroyed as
CQ should be destroyed after QP destruction. Seg fault is caused
improper cleanup when connection fails. Fixing cleanup after
connection failure and order in which resources are destroyed
in qemu_rdma_cleanup() routine.
Signed-off-by: Meghana Cheripady <meghana.cheripady@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
'cancelling' status was introduced by commit 51cf4c1a, mainly to avoid a
possible start of a new migration process while the previous one still exists.
But we didn't expose this status to user, instead we returned the 'active' state.
Here, we expose it to the user (such as libvirt), 'cancelling' status only
occurs for a short window before the migration aborts, so for users,
if they cancel a migration process, it will observe 'cancelling' status
occasionally.
Testing revealed that with older libvirt (anything 1.2.13 or less) will
print an odd error message if the state is seen, but that the migration
is still properly cancelled. Newer libvirt will be patched to recognize
the new state without the odd error message.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cc: libvir-list@redhat.com
Signed-off-by: Juan Quintela <quintela@redhat.com>
The original 'status' is an open-coded 'str' type, convert it to use an
enum type.
This conversion is backwards compatible, better documented and
more convenient for future extensibility.
In addition, Fix a typo for qapi-schema.json (just remove the typo) :
s/'completed'. 'comppleted' (since 1.2)/'completed' (since 1.2)
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rename all macro MIG_STATE_* to MIGRATION_STATUS_* except "MIG_STATE_ERROR",
we rename it to "MIGRATION_STATUS_FAILED" which will match the migration status
string 'failed'.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
migrate_rdma_pin_all() and qsb_clone() are completely unused and thus
can be deleted.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create a separate error for the case where migrate_incoming is
used after a succesful migrate_incoming.
Reword the error in the case where '-incoming defer' is missing
to omit the command name so it's right for both hmp and qmp.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fix type casts between pointers and 64 bit integers.
Now 32 bit builds are possible again.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The current code won't compile on 32 bit hosts because there are lots
of type casts between pointers and 64 bit integers.
Fix some of them.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Do not check for rdma->host being empty twice. This removes a large
"if" block, so code indentation is changed. While at it, remove an
ugly goto from the loop, replacing it with a cleaner if logic. And
finally, there's no need to initialize `ret' variable since is always
has a value.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
--
fixed space detected by Dave
Signed-off-by: Juan Quintela <quintela@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in
process_incoming_migration_co().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It used to be an int, but then we can't pass directly the
bytes_transferred parameter, that would happen later in the series.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Add migrate_incoming/migrate-incoming to start an incoming
migration.
Once a qemu has been started with
-incoming defer
the migration can be started by issuing:
migrate_incoming uri
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-incoming defer causes qemu to wait for an incoming migration
to be specified later. The monitor can be used to set migration
capabilities that may affect the incoming connection process.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* Remove trailing whitespace (fixes 9 errors from checkpatch.pl).
One comment line was longer than 80 characters, so wrap it
and fix a typo, too.
* Replace tabs by blanks (fixes 1 error).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It looks like the dtrace trace code gets upset if you have trace names
with __ in, which the migration/rdma.c code does.
Rename the functions and the associated traces.
Fixes: 733252deb8
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1424105885-12149-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Warnings from the Sparse static analysis tool:
migration-rdma.c:151:12: warning:
symbol 'wrid_desc' was not declared. Should it be static?
migration-rdma.c:190:12: warning:
symbol 'control_desc' was not declared. Should it be static?
migration-rdma.c:3301:19: warning:
symbol 'rdma_read_ops' was not declared. Should it be static?
migration-rdma.c:3308:19: warning:
symbol 'rdma_write_ops' was not declared. Should it be static?
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Turn all the D/DD/DDDPRINTFs into trace events
Turn most of the fprintf(stderr, into error_report
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One of the annoyances of the current migration format is the fact that
it's not self-describing. In fact, it's not properly describing at all.
Some code randomly scattered throughout QEMU elaborates roughly how to
read and write a stream of bytes.
We discussed an idea during KVM Forum 2013 to add a JSON description of
the migration protocol itself to the migration stream. This patch
adds a section after the VM_END migration end marker that contains
description data on what the device sections of the stream are composed of.
This approach is backwards compatible with any QEMU version reading the
stream, because QEMU just stops reading after the VM_END marker and ignores
any data following it.
With an additional external program this allows us to decipher the
contents of any migration stream and hopefully make migration bugs easier
to track down.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For ftell we flush the output buffer to ensure that we don't have anything
lingering in our internal buffers. This is a very safe thing to do.
However, with the dynamic size measurement that the dynamic vmstate
description will bring this would turn out quite slow.
Instead, we can fast path this specific measurement and just take the
internal buffers into account when telling the kernel our position.
I'm sure I overlooked some corner cases where this doesn't work, so
instead of tuning the safe, existing version, this patch adds a fast
variant of ftell that gets used by the dynamic vmstate description code
which isn't critical when it fails.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Mostly on the load side, so that when we get a complaint about
a migration failure we can figure out what it didn't like.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Convert a bunch of fprintfs to error_reports
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Force shutdown on migration socket on cancel to cause the cancel
to complete even if the socket is blocked on a dead network.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
libvirt prefers opening the TCP connection itself, for two reasons.
First, connection failed errors can be detected easier, without having
to parse qemu's error output.
Second, libvirt might be asked to secure the transfer by tunnelling the
communication through an TLS layer.
Therefore, libvirt opens the TCP connection itself and passes an FD to qemu
using QMP and a POSIX-specific mechanism.
Hence, in order to make the reverse-path work in such cases, qemu needs to
distinguish if the transmitted FD is a socket (reverse-path available)
or not (reverse-path might not be available) and use the corresponding
abstraction.
Signed-off-by: Cristian Klein <cristian.klein@cs.umu.se>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Add QEMUFile interface to allow a socket to be 'shut down' - i.e. any
reads/writes will fail (and any blocking read/write will be woken).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Only free qsb that qemu_bufopen allocated, and also allow
qemu_bufopen accept qsb as input for write operation. It
will make the API more logical:
1.If you create the QEMUSizedBuffer yourself, you need to
free it by using qsb_free() but not depends on other API
like qemu_fclose.
2.allow qemu_bufopen() accept QEMUSizedBuffer as input for
write operation, otherwise, it will be a little strange
for this API won't accept the second parameter.
This brings API change, since there are only 3
users of this API currently, this change only impact the
first one which will be fixed in patch 2 of this patchset,
so I think it is safe to do this change.
1 70 tests/test-vmstate.c <<open_mem_file_read>>
return qemu_bufopen("r", qsb);
2 404 tests/test-vmstate.c <<test_save_noskip>>
QEMUFile *fsave = qemu_bufopen("w", NULL);
3 424 tests/test-vmstate.c <<test_save_skip>>
QEMUFile *fsave = qemu_bufopen("w", NULL);
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Add a cast in qemu_get_be32() to avoid shifting left into the sign
bit of a signed integer (which is undefined behaviour in C).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Because of wrong return value of .save_live_pending() in
migration/block.c, migration finishes before the whole disk is
transferred. Such situation occurs when the migration process is fast
enough, for example when source and dest are on the same host.
If in the bulk phase we return something < max_size, we will skip
transferring the tail of the device. Currently we have "set pending to
BLOCK_SIZE if it is zero" for bulk phase, but there no guarantee, that
it will be < max_size.
True approach is to return, for example, max_size+1 when we are in the
bulk phase.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
Message-id: 1419933856-4018-2-git-send-email-vsementsov@parallels.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Mirror and migration use dirty bitmaps for their purposes, and since
commit [block: per caller dirty bitmap] they use their own bitmaps, not
the global one. But they use old functions bdrv_set_dirty and
bdrv_reset_dirty, which change all dirty bitmaps.
Named dirty bitmaps series by Fam and Snow are affected: mirroring and
migration will spoil all (not related to this mirroring or migration)
named dirty bitmaps.
This patch fixes this by adding bdrv_set_dirty_bitmap and
bdrv_reset_dirty_bitmap, which change concrete bitmap. Also, to prevent
such mistakes in future, old functions bdrv_(set,reset)_dirty are made
static, for internal block usage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@parallels.com>
CC: John Snow <jsnow@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 1417081246-3593-1-git-send-email-vsementsov@parallels.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The splitting of qemu-file and addition of the buffered file landed
at the same time; so now split the buffered file code out.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Now we've got multiple QEMUFile source files, some of them need
access to things that were defined in qemu-file.c, so create
a -internal header for them.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The general feeling is that having migration/migration-blah
is overkill.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The migration code now occupies a fair chunk of the top level .c
files, it seems time to give it it's own directory.
I've not touched:
arch_init.c - that's mostly RAM migration but has a few random other
bits
savevm.c - because it's built target specific
This is purely a code move; no code has changed.
- it fails checkpatch because of old violations, it feels safer
to keep this as purely a move and fix those at some mythical future
date.
The xbzrle and vmstate tests are now only run for softmmu builds
since they require files in the migrate/ directory which is only built
for softmmu.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
