a775cb191e
1220 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Zhao Liu
|
a775cb191e |
tests: bios-tables-test: Add ACPI table binaries for smbios type4 thread count test
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
FACP:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-1NP791, Wed Aug 23 21:51:31 2023
+ *
+ * ACPI Data Table [FACP]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
+[004h 0004 4] Table Length : 000000F4
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : B3
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] FACS Address : 00000000
+[028h 0040 4] DSDT Address : 00000000
+[02Ch 0044 1] Model : 01
+[02Dh 0045 1] PM Profile : 00 [Unspecified]
+[02Eh 0046 2] SCI Interrupt : 0009
+[030h 0048 4] SMI Command Port : 000000B2
+[034h 0052 1] ACPI Enable Value : 02
+[035h 0053 1] ACPI Disable Value : 03
+[036h 0054 1] S4BIOS Command : 00
+[037h 0055 1] P-State Control : 00
+[038h 0056 4] PM1A Event Block Address : 00000600
+[03Ch 0060 4] PM1B Event Block Address : 00000000
+[040h 0064 4] PM1A Control Block Address : 00000604
+[044h 0068 4] PM1B Control Block Address : 00000000
+[048h 0072 4] PM2 Control Block Address : 00000000
+[04Ch 0076 4] PM Timer Block Address : 00000608
+[050h 0080 4] GPE0 Block Address : 00000620
+[054h 0084 4] GPE1 Block Address : 00000000
+[058h 0088 1] PM1 Event Block Length : 04
+[059h 0089 1] PM1 Control Block Length : 02
+[05Ah 0090 1] PM2 Control Block Length : 00
+[05Bh 0091 1] PM Timer Block Length : 04
+[05Ch 0092 1] GPE0 Block Length : 10
+[05Dh 0093 1] GPE1 Block Length : 00
+[05Eh 0094 1] GPE1 Base Offset : 00
+[05Fh 0095 1] _CST Support : 00
+[060h 0096 2] C2 Latency : 0FFF
+[062h 0098 2] C3 Latency : 0FFF
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
+[069h 0105 1] Duty Cycle Width : 00
+[06Ah 0106 1] RTC Day Alarm Index : 00
+[06Bh 0107 1] RTC Month Alarm Index : 00
+[06Ch 0108 1] RTC Century Index : 32
+[06Dh 0109 2] Boot Flags (decoded below) : 0002
+ Legacy Devices Supported (V2) : 0
+ 8042 Present on ports 60/64 (V2) : 1
+ VGA Not Present (V4) : 0
+ MSI Not Supported (V4) : 0
+ PCIe ASPM Not Supported (V4) : 0
+ CMOS RTC Not Present (V5) : 0
+[06Fh 0111 1] Reserved : 00
+[070h 0112 4] Flags (decoded below) : 000484A5
+ WBINVD instruction is operational (V1) : 1
+ WBINVD flushes all caches (V1) : 0
+ All CPUs support C1 (V1) : 1
+ C2 works on MP system (V1) : 0
+ Control Method Power Button (V1) : 0
+ Control Method Sleep Button (V1) : 1
+ RTC wake not in fixed reg space (V1) : 0
+ RTC can wake system from S4 (V1) : 1
+ 32-bit PM Timer (V1) : 0
+ Docking Supported (V1) : 0
+ Reset Register Supported (V2) : 1
+ Sealed Case (V3) : 0
+ Headless - No Video (V3) : 0
+ Use native instr after SLP_TYPx (V3) : 0
+ PCIEXP_WAK Bits Supported (V4) : 0
+ Use Platform Timer (V4) : 1
+ RTC_STS valid on S4 wake (V4) : 0
+ Remote Power-on capable (V4) : 0
+ Use APIC Cluster Model (V4) : 1
+ Use APIC Physical Destination Mode (V4) : 0
+ Hardware Reduced (V5) : 0
+ Low Power S0 Idle (V5) : 0
+
+[074h 0116 12] Reset Register : [Generic Address Structure]
+[074h 0116 1] Space ID : 01 [SystemIO]
+[075h 0117 1] Bit Width : 08
+[076h 0118 1] Bit Offset : 00
+[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[078h 0120 8] Address : 0000000000000CF9
+
+[080h 0128 1] Value to cause reset : 0F
+[081h 0129 2] ARM Flags (decoded below) : 0000
+ PSCI Compliant : 0
+ Must use HVC for PSCI : 0
+
+[083h 0131 1] FADT Minor Revision : 00
+[084h 0132 8] FACS Address : 0000000000000000
+[08Ch 0140 8] DSDT Address : 0000000000000000
+[094h 0148 12] PM1A Event Block : [Generic Address Structure]
+[094h 0148 1] Space ID : 01 [SystemIO]
+[095h 0149 1] Bit Width : 20
+[096h 0150 1] Bit Offset : 00
+[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[098h 0152 8] Address : 0000000000000600
+
+[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
+[0A0h 0160 1] Space ID : 00 [SystemMemory]
+[0A1h 0161 1] Bit Width : 00
+[0A2h 0162 1] Bit Offset : 00
+[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0A4h 0164 8] Address : 0000000000000000
+
+[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
+[0ACh 0172 1] Space ID : 01 [SystemIO]
+[0ADh 0173 1] Bit Width : 10
+[0AEh 0174 1] Bit Offset : 00
+[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0B0h 0176 8] Address : 0000000000000604
+
+[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
+[0B8h 0184 1] Space ID : 00 [SystemMemory]
+[0B9h 0185 1] Bit Width : 00
+[0BAh 0186 1] Bit Offset : 00
+[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0BCh 0188 8] Address : 0000000000000000
+
+[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
+[0C4h 0196 1] Space ID : 00 [SystemMemory]
+[0C5h 0197 1] Bit Width : 00
+[0C6h 0198 1] Bit Offset : 00
+[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C8h 0200 8] Address : 0000000000000000
+
+[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
+[0D0h 0208 1] Space ID : 01 [SystemIO]
+[0D1h 0209 1] Bit Width : 20
+[0D2h 0210 1] Bit Offset : 00
+[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D4h 0212 8] Address : 0000000000000608
+
+[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
+[0DDh 0221 1] Bit Width : 80
+[0DEh 0222 1] Bit Offset : 00
+[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0E0h 0224 8] Address : 0000000000000620
+
+[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
+[0E8h 0232 1] Space ID : 00 [SystemMemory]
+[0E9h 0233 1] Bit Width : 00
+[0EAh 0234 1] Bit Offset : 00
+[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0ECh 0236 8] Address : 0000000000000000
...
APIC:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-2JP791, Wed Aug 23 21:51:31 2023
+ *
+ * ACPI Data Table [APIC]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
+[004h 0004 4] Table Length : 00000220
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : 63
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] Local Apic Address : FEE00000
+[028h 0040 4] Flags (decoded below) : 00000001
+ PC-AT Compatibility : 1
+
+[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
+[02Dh 0045 1] Length : 08
+[02Eh 0046 1] Processor ID : 00
+[02Fh 0047 1] Local Apic ID : 00
+[030h 0048 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[034h 0052 1] Subtable Type : 00 [Processor Local APIC]
+[035h 0053 1] Length : 08
+[036h 0054 1] Processor ID : 01
+[037h 0055 1] Local Apic ID : 01
+[038h 0056 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
[snip]
+[1D4h 0468 1] Subtable Type : 00 [Processor Local APIC]
+[1D5h 0469 1] Length : 08
+[1D6h 0470 1] Processor ID : 35
+[1D7h 0471 1] Local Apic ID : 6A
+[1D8h 0472 4] Flags (decoded below) : 00000000
+ Processor Enabled : 0
+ Runtime Online Capable : 0
+
+[1DCh 0476 1] Subtable Type : 01 [I/O APIC]
+[1DDh 0477 1] Length : 0C
+[1DEh 0478 1] I/O Apic ID : 00
+[1DFh 0479 1] Reserved : 00
+[1E0h 0480 4] Address : FEC00000
+[1E4h 0484 4] Interrupt : 00000000
+
+[1E8h 0488 1] Subtable Type : 02 [Interrupt Source Override]
+[1E9h 0489 1] Length : 0A
+[1EAh 0490 1] Bus : 00
+[1EBh 0491 1] Source : 00
+[1ECh 0492 4] Interrupt : 00000002
+[1F0h 0496 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+
+[1F2h 0498 1] Subtable Type : 02 [Interrupt Source Override]
+[1F3h 0499 1] Length : 0A
+[1F4h 0500 1] Bus : 00
+[1F5h 0501 1] Source : 05
+[1F6h 0502 4] Interrupt : 00000005
+[1FAh 0506 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[1FCh 0508 1] Subtable Type : 02 [Interrupt Source Override]
+[1FDh 0509 1] Length : 0A
+[1FEh 0510 1] Bus : 00
+[1FFh 0511 1] Source : 09
+[200h 0512 4] Interrupt : 00000009
+[204h 0516 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[206h 0518 1] Subtable Type : 02 [Interrupt Source Override]
+[207h 0519 1] Length : 0A
+[208h 0520 1] Bus : 00
+[209h 0521 1] Source : 0A
+[20Ah 0522 4] Interrupt : 0000000A
+[20Eh 0526 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[210h 0528 1] Subtable Type : 02 [Interrupt Source Override]
+[211h 0529 1] Length : 0A
+[212h 0530 1] Bus : 00
+[213h 0531 1] Source : 0B
+[214h 0532 4] Interrupt : 0000000B
+[218h 0536 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[21Ah 0538 1] Subtable Type : 04 [Local APIC NMI]
+[21Bh 0539 1] Length : 06
+[21Ch 0540 1] Processor ID : FF
+[21Dh 0541 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+[21Fh 0543 1] Interrupt Input LINT : 01
...
DSDT:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembling to symbolic ASL+ operators
+ *
+ * Disassembly of /tmp/aml-00O791, Wed Aug 23 21:51:31 2023
+ *
+ * Original Table Header:
+ * Signature "DSDT"
+ * Length 0x00003271 (12913)
+ * Revision 0x01 **** 32-bit table (V1), no 64-bit math support
+ * Checksum 0xAF
+ * OEM ID "BOCHS "
+ * OEM Table ID "BXPC "
+ * OEM Revision 0x00000001 (1)
+ * Compiler ID "BXPC"
+ * Compiler Version 0x00000001 (1)
+ */
+DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
+{
+ Scope (\)
+ {
+ OperationRegion (DBG, SystemIO, 0x0402, One)
+ Field (DBG, ByteAcc, NoLock, Preserve)
+ {
+ DBGB, 8
+ }
+
+ Method (DBUG, 1, NotSerialized)
+ {
+ ToHexString (Arg0, Local0)
+ ToBuffer (Local0, Local0)
+ Local1 = (SizeOf (Local0) - One)
+ Local2 = Zero
+ While ((Local2 < Local1))
+ {
+ DBGB = DerefOf (Local0 [Local2])
+ Local2++
+ }
+
+ DBGB = 0x0A
+ }
+ }
[snip]
+ Processor (C000, 0x00, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (Zero))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (Zero, Arg0, Arg1, Arg2)
+ }
+ }
+
+ Processor (C001, 0x01, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (One))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (One)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (One, Arg0, Arg1, Arg2)
+ }
+ }
[snip]
+ Processor (C035, 0x35, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0x35))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x35, 0x6A, 0x01, 0x00, 0x00, 0x00 // ..5j....
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0x35)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0x35, Arg0, Arg1, Arg2)
+ }
+ }
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-14-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Zhao Liu
|
7ee18dcef1 |
tests: bios-tables-test: Add test for smbios type4 thread count
This tests the commit
|
||
|
Zhao Liu
|
85ccbe1275 |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 thread count test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be added to test the thread count field of smbios type4 table. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-12-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Zhao Liu
|
f03359a85b |
tests: bios-tables-test: Update ACPI table binaries for smbios core count2 test
Change the core count2 from 275 to 260.
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
APIC:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20200925 (64-bit version)
* Copyright (c) 2000 - 2020 Intel Corporation
*
- * Disassembly of tests/data/acpi/q35/APIC.core-count2, Wed Aug 23 16:29:51 2023
+ * Disassembly of /tmp/aml-KQDX91, Wed Aug 23 16:29:51 2023
*
* ACPI Data Table [APIC]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
-[004h 0004 4] Table Length : 000009AE
+[004h 0004 4] Table Length : 00000CA6
[008h 0008 1] Revision : 03
-[009h 0009 1] Checksum : CE
+[009h 0009 1] Checksum : FA
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
[024h 0036 4] Local Apic Address : FEE00000
[028h 0040 4] Flags (decoded below) : 00000001
PC-AT Compatibility : 1
[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
[02Dh 0045 1] Length : 08
[02Eh 0046 1] Processor ID : 00
[02Fh 0047 1] Local Apic ID : 00
[030h 0048 4] Flags (decoded below) : 00000001
Processor Enabled : 1
@@ -1051,1256 +1051,1136 @@
[42Ch 1068 1] Subtable Type : 00 [Processor Local APIC]
[42Dh 1069 1] Length : 08
[42Eh 1070 1] Processor ID : 80
[42Fh 1071 1] Local Apic ID : 80
[430h 1072 4] Flags (decoded below) : 00000001
Processor Enabled : 1
Runtime Online Capable : 0
[434h 1076 1] Subtable Type : 00 [Processor Local APIC]
[435h 1077 1] Length : 08
[436h 1078 1] Processor ID : 81
[437h 1079 1] Local Apic ID : 81
[438h 1080 4] Flags (decoded below) : 00000001
Processor Enabled : 1
Runtime Online Capable : 0
-[43Ch 1084 1] Subtable Type : 00 [Processor Local APIC]
-[43Dh 1085 1] Length : 08
-[43Eh 1086 1] Processor ID : 82
-[43Fh 1087 1] Local Apic ID : 82
-[440h 1088 4] Flags (decoded below) : 00000001
- Processor Enabled : 1
- Runtime Online Capable : 0
-
-[444h 1092 1] Subtable Type : 00 [Processor Local APIC]
-[445h 1093 1] Length : 08
-[446h 1094 1] Processor ID : 83
-[447h 1095 1] Local Apic ID : 83
-[448h 1096 4] Flags (decoded below) : 00000001
- Processor Enabled : 1
- Runtime Online Capable : 0
[snip]
-
-[964h 2404 1] Subtable Type : 01 [I/O APIC]
-[965h 2405 1] Length : 0C
-[966h 2406 1] I/O Apic ID : 00
-[967h 2407 1] Reserved : 00
-[968h 2408 4] Address : FEC00000
-[96Ch 2412 4] Interrupt : 00000000
-
-[970h 2416 1] Subtable Type : 02 [Interrupt Source Override]
-[971h 2417 1] Length : 0A
-[972h 2418 1] Bus : 00
-[973h 2419 1] Source : 00
-[974h 2420 4] Interrupt : 00000002
-[978h 2424 2] Flags (decoded below) : 0000
+[43Ch 1084 1] Subtable Type : 09 [Processor Local x2APIC]
+[43Dh 1085 1] Length : 10
+[43Eh 1086 2] Reserved : 0000
+[440h 1088 4] Processor x2Apic ID : 00000100
+[444h 1092 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+[448h 1096 4] Processor UID : 00000082
+
+[44Ch 1100 1] Subtable Type : 09 [Processor Local x2APIC]
+[44Dh 1101 1] Length : 10
+[44Eh 1102 2] Reserved : 0000
+[450h 1104 4] Processor x2Apic ID : 00000101
+[454h 1108 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+[458h 1112 4] Processor UID : 00000083
+
[snip]
+
+[C68h 3176 1] Subtable Type : 02 [Interrupt Source Override]
+[C69h 3177 1] Length : 0A
+[C6Ah 3178 1] Bus : 00
+[C6Bh 3179 1] Source : 00
+[C6Ch 3180 4] Interrupt : 00000002
+[C70h 3184 2] Flags (decoded below) : 0000
Polarity : 0
Trigger Mode : 0
-[97Ah 2426 1] Subtable Type : 02 [Interrupt Source Override]
-[97Bh 2427 1] Length : 0A
-[97Ch 2428 1] Bus : 00
-[97Dh 2429 1] Source : 05
-[97Eh 2430 4] Interrupt : 00000005
-[982h 2434 2] Flags (decoded below) : 000D
+[C72h 3186 1] Subtable Type : 02 [Interrupt Source Override]
+[C73h 3187 1] Length : 0A
+[C74h 3188 1] Bus : 00
+[C75h 3189 1] Source : 05
+[C76h 3190 4] Interrupt : 00000005
+[C7Ah 3194 2] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
-[984h 2436 1] Subtable Type : 02 [Interrupt Source Override]
-[985h 2437 1] Length : 0A
-[986h 2438 1] Bus : 00
-[987h 2439 1] Source : 09
-[988h 2440 4] Interrupt : 00000009
-[98Ch 2444 2] Flags (decoded below) : 000D
+[C7Ch 3196 1] Subtable Type : 02 [Interrupt Source Override]
+[C7Dh 3197 1] Length : 0A
+[C7Eh 3198 1] Bus : 00
+[C7Fh 3199 1] Source : 09
+[C80h 3200 4] Interrupt : 00000009
+[C84h 3204 2] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
-[98Eh 2446 1] Subtable Type : 02 [Interrupt Source Override]
-[98Fh 2447 1] Length : 0A
-[990h 2448 1] Bus : 00
-[991h 2449 1] Source : 0A
-[992h 2450 4] Interrupt : 0000000A
-[996h 2454 2] Flags (decoded below) : 000D
+[C86h 3206 1] Subtable Type : 02 [Interrupt Source Override]
+[C87h 3207 1] Length : 0A
+[C88h 3208 1] Bus : 00
+[C89h 3209 1] Source : 0A
+[C8Ah 3210 4] Interrupt : 0000000A
+[C8Eh 3214 2] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
-[998h 2456 1] Subtable Type : 02 [Interrupt Source Override]
-[999h 2457 1] Length : 0A
-[99Ah 2458 1] Bus : 00
-[99Bh 2459 1] Source : 0B
-[99Ch 2460 4] Interrupt : 0000000B
-[9A0h 2464 2] Flags (decoded below) : 000D
+[C90h 3216 1] Subtable Type : 02 [Interrupt Source Override]
+[C91h 3217 1] Length : 0A
+[C92h 3218 1] Bus : 00
+[C93h 3219 1] Source : 0B
+[C94h 3220 4] Interrupt : 0000000B
+[C98h 3224 2] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
-[9A2h 2466 1] Subtable Type : 0A [Local x2APIC NMI]
-[9A3h 2467 1] Length : 0C
-[9A4h 2468 2] Flags (decoded below) : 0000
+[C9Ah 3226 1] Subtable Type : 0A [Local x2APIC NMI]
+[C9Bh 3227 1] Length : 0C
+[C9Ch 3228 2] Flags (decoded below) : 0000
Polarity : 0
Trigger Mode : 0
-[9A6h 2470 4] Processor UID : FFFFFFFF
-[9AAh 2474 1] Interrupt Input LINT : 01
-[9ABh 2475 3] Reserved : 000000
+[C9Eh 3230 4] Processor UID : FFFFFFFF
+[CA2h 3234 1] Interrupt Input LINT : 01
+[CA3h 3235 3] Reserved : 000000
...
DSDT:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20200925 (64-bit version)
* Copyright (c) 2000 - 2020 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT.core-count2, Wed Aug 23 16:29:51 2023
+ * Disassembly of /tmp/aml-6DDX91, Wed Aug 23 16:29:51 2023
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00007EEF (32495)
+ * Length 0x000083EA (33770)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0x52
+ * Checksum 0x01
* OEM ID "BOCHS "
* OEM Table ID "BXPC "
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -4196,107 +4196,32 @@
}
If ((Arg0 == 0x0101))
{
Notify (C101, Arg1)
}
If ((Arg0 == 0x0102))
{
Notify (C102, Arg1)
}
If ((Arg0 == 0x0103))
{
Notify (C103, Arg1)
}
-
- If ((Arg0 == 0x0104))
- {
- Notify (C104, Arg1)
- }
-
- If ((Arg0 == 0x0105))
- {
- Notify (C105, Arg1)
- }
-
- If ((Arg0 == 0x0106))
- {
- Notify (C106, Arg1)
- }
-
[snip]
- If ((Arg0 == 0x0112))
- {
- Notify (C112, Arg1)
- }
}
Method (CSTA, 1, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
\_SB.PCI0.PRES.CSEL = Arg0
Local0 = Zero
If ((\_SB.PCI0.PRES.CPEN == One))
{
Local0 = 0x0F
}
Release (\_SB.PCI0.PRES.CPLK)
Return (Local0)
}
@@ -4306,33 +4231,33 @@
\_SB.PCI0.PRES.CSEL = Arg0
\_SB.PCI0.PRES.CEJ0 = One
Release (\_SB.PCI0.PRES.CPLK)
}
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
Name (CNEW, Package (0xFF) {})
Local3 = Zero
Local4 = One
While ((Local4 == One))
{
Local4 = Zero
Local0 = One
Local1 = Zero
- While (((Local0 == One) && (Local3 < 0x0113)))
+ While (((Local0 == One) && (Local3 < 0x0104)))
{
Local0 = Zero
\_SB.PCI0.PRES.CSEL = Local3
\_SB.PCI0.PRES.CCMD = Zero
If ((\_SB.PCI0.PRES.CDAT < Local3))
{
Break
}
If ((Local1 == 0xFF))
{
Local4 = One
Break
}
Local3 = \_SB.PCI0.PRES.CDAT
@@ -7220,3281 +7145,3281 @@
Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
{
0x00, 0x08, 0x81, 0x81, 0x01, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0x81)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0x81, Arg0, Arg1, Arg2)
}
}
- Processor (C082, 0x82, 0x00000000, 0x00)
+ Device (C082)
{
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0x82) // _UID: Unique ID
Method (_STA, 0, Serialized) // _STA: Status
{
Return (CSTA (0x82))
}
- Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
{
- 0x00, 0x08, 0x82, 0x82, 0x01, 0x00, 0x00, 0x00 // ........
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, // ........
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0x82)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0x82, Arg0, Arg1, Arg2)
}
}
- Processor (C083, 0x83, 0x00000000, 0x00)
+ Device (C083)
{
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0x83) // _UID: Unique ID
Method (_STA, 0, Serialized) // _STA: Status
{
Return (CSTA (0x83))
}
- Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
{
- 0x00, 0x08, 0x83, 0x83, 0x01, 0x00, 0x00, 0x00 // ........
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, // ........
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0x83, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0x83)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0x83, Arg0, Arg1, Arg2)
}
}
- Processor (C084, 0x84, 0x00000000, 0x00)
+ Device (C084)
{
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0x84) // _UID: Unique ID
Method (_STA, 0, Serialized) // _STA: Status
{
Return (CSTA (0x84))
}
- Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
{
- 0x00, 0x08, 0x84, 0x84, 0x01, 0x00, 0x00, 0x00 // ........
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0x02, 0x01, 0x00, 0x00, // ........
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0x84)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0x84, Arg0, Arg1, Arg2)
}
}
[snip]
- Processor (C0FE, 0xFE, 0x00000000, 0x00)
+ Device (C0FE)
{
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0xFE) // _UID: Unique ID
Method (_STA, 0, Serialized) // _STA: Status
{
Return (CSTA (0xFE))
}
- Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
{
- 0x00, 0x08, 0xFE, 0xFE, 0x01, 0x00, 0x00, 0x00 // ........
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0x7C, 0x01, 0x00, 0x00, // ....|...
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00 // ........
})
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
{
CEJ0 (0xFE)
}
Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
{
COST (0xFE, Arg0, Arg1, Arg2)
}
}
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-11-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Zhao Liu
|
6dc82e3222 |
tests: bios-tables-test: Extend smbios core count2 test to cover general topology
The commit
|
||
|
Zhao Liu
|
c63fcb2c10 |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 core count2 test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be changed about the type 4 core count2 test case. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-9-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Zhao Liu
|
61ace1d772 |
tests: bios-tables-test: Add ACPI table binaries for smbios type4 core count test
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
FACP:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-Y6WW91, Wed Aug 23 15:43:43 2023
+ *
+ * ACPI Data Table [FACP]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
+[004h 0004 4] Table Length : 000000F4
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : B3
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] FACS Address : 00000000
+[028h 0040 4] DSDT Address : 00000000
+[02Ch 0044 1] Model : 01
+[02Dh 0045 1] PM Profile : 00 [Unspecified]
+[02Eh 0046 2] SCI Interrupt : 0009
+[030h 0048 4] SMI Command Port : 000000B2
+[034h 0052 1] ACPI Enable Value : 02
+[035h 0053 1] ACPI Disable Value : 03
+[036h 0054 1] S4BIOS Command : 00
+[037h 0055 1] P-State Control : 00
+[038h 0056 4] PM1A Event Block Address : 00000600
+[03Ch 0060 4] PM1B Event Block Address : 00000000
+[040h 0064 4] PM1A Control Block Address : 00000604
+[044h 0068 4] PM1B Control Block Address : 00000000
+[048h 0072 4] PM2 Control Block Address : 00000000
+[04Ch 0076 4] PM Timer Block Address : 00000608
+[050h 0080 4] GPE0 Block Address : 00000620
+[054h 0084 4] GPE1 Block Address : 00000000
+[058h 0088 1] PM1 Event Block Length : 04
+[059h 0089 1] PM1 Control Block Length : 02
+[05Ah 0090 1] PM2 Control Block Length : 00
+[05Bh 0091 1] PM Timer Block Length : 04
+[05Ch 0092 1] GPE0 Block Length : 10
+[05Dh 0093 1] GPE1 Block Length : 00
+[05Eh 0094 1] GPE1 Base Offset : 00
+[05Fh 0095 1] _CST Support : 00
+[060h 0096 2] C2 Latency : 0FFF
+[062h 0098 2] C3 Latency : 0FFF
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
+[069h 0105 1] Duty Cycle Width : 00
+[06Ah 0106 1] RTC Day Alarm Index : 00
+[06Bh 0107 1] RTC Month Alarm Index : 00
+[06Ch 0108 1] RTC Century Index : 32
+[06Dh 0109 2] Boot Flags (decoded below) : 0002
+ Legacy Devices Supported (V2) : 0
+ 8042 Present on ports 60/64 (V2) : 1
+ VGA Not Present (V4) : 0
+ MSI Not Supported (V4) : 0
+ PCIe ASPM Not Supported (V4) : 0
+ CMOS RTC Not Present (V5) : 0
+[06Fh 0111 1] Reserved : 00
+[070h 0112 4] Flags (decoded below) : 000484A5
+ WBINVD instruction is operational (V1) : 1
+ WBINVD flushes all caches (V1) : 0
+ All CPUs support C1 (V1) : 1
+ C2 works on MP system (V1) : 0
+ Control Method Power Button (V1) : 0
+ Control Method Sleep Button (V1) : 1
+ RTC wake not in fixed reg space (V1) : 0
+ RTC can wake system from S4 (V1) : 1
+ 32-bit PM Timer (V1) : 0
+ Docking Supported (V1) : 0
+ Reset Register Supported (V2) : 1
+ Sealed Case (V3) : 0
+ Headless - No Video (V3) : 0
+ Use native instr after SLP_TYPx (V3) : 0
+ PCIEXP_WAK Bits Supported (V4) : 0
+ Use Platform Timer (V4) : 1
+ RTC_STS valid on S4 wake (V4) : 0
+ Remote Power-on capable (V4) : 0
+ Use APIC Cluster Model (V4) : 1
+ Use APIC Physical Destination Mode (V4) : 0
+ Hardware Reduced (V5) : 0
+ Low Power S0 Idle (V5) : 0
+
+[074h 0116 12] Reset Register : [Generic Address Structure]
+[074h 0116 1] Space ID : 01 [SystemIO]
+[075h 0117 1] Bit Width : 08
+[076h 0118 1] Bit Offset : 00
+[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[078h 0120 8] Address : 0000000000000CF9
+
+[080h 0128 1] Value to cause reset : 0F
+[081h 0129 2] ARM Flags (decoded below) : 0000
+ PSCI Compliant : 0
+ Must use HVC for PSCI : 0
+
+[083h 0131 1] FADT Minor Revision : 00
+[084h 0132 8] FACS Address : 0000000000000000
+[08Ch 0140 8] DSDT Address : 0000000000000000
+[094h 0148 12] PM1A Event Block : [Generic Address Structure]
+[094h 0148 1] Space ID : 01 [SystemIO]
+[095h 0149 1] Bit Width : 20
+[096h 0150 1] Bit Offset : 00
+[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[098h 0152 8] Address : 0000000000000600
+
+[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
+[0A0h 0160 1] Space ID : 00 [SystemMemory]
+[0A1h 0161 1] Bit Width : 00
+[0A2h 0162 1] Bit Offset : 00
+[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0A4h 0164 8] Address : 0000000000000000
+
+[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
+[0ACh 0172 1] Space ID : 01 [SystemIO]
+[0ADh 0173 1] Bit Width : 10
+[0AEh 0174 1] Bit Offset : 00
+[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0B0h 0176 8] Address : 0000000000000604
+
+[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
+[0B8h 0184 1] Space ID : 00 [SystemMemory]
+[0B9h 0185 1] Bit Width : 00
+[0BAh 0186 1] Bit Offset : 00
+[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0BCh 0188 8] Address : 0000000000000000
+
+[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
+[0C4h 0196 1] Space ID : 00 [SystemMemory]
+[0C5h 0197 1] Bit Width : 00
+[0C6h 0198 1] Bit Offset : 00
+[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C8h 0200 8] Address : 0000000000000000
+
+[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
+[0D0h 0208 1] Space ID : 01 [SystemIO]
+[0D1h 0209 1] Bit Width : 20
+[0D2h 0210 1] Bit Offset : 00
+[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D4h 0212 8] Address : 0000000000000608
+
+[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
+[0DDh 0221 1] Bit Width : 80
+[0DEh 0222 1] Bit Offset : 00
+[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0E0h 0224 8] Address : 0000000000000620
+
+[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
+[0E8h 0232 1] Space ID : 00 [SystemMemory]
+[0E9h 0233 1] Bit Width : 00
+[0EAh 0234 1] Bit Offset : 00
+[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0ECh 0236 8] Address : 0000000000000000
...
APIC:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-FFXW91, Wed Aug 23 15:43:43 2023
+ *
+ * ACPI Data Table [APIC]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
+[004h 0004 4] Table Length : 00000220
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : 3C
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] Local Apic Address : FEE00000
+[028h 0040 4] Flags (decoded below) : 00000001
+ PC-AT Compatibility : 1
+
+[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
+[02Dh 0045 1] Length : 08
+[02Eh 0046 1] Processor ID : 00
+[02Fh 0047 1] Local Apic ID : 00
+[030h 0048 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
[snip]
+[1D4h 0468 1] Subtable Type : 00 [Processor Local APIC]
+[1D5h 0469 1] Length : 08
+[1D6h 0470 1] Processor ID : 35
+[1D7h 0471 1] Local Apic ID : 6A
+[1D8h 0472 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[1DCh 0476 1] Subtable Type : 01 [I/O APIC]
+[1DDh 0477 1] Length : 0C
+[1DEh 0478 1] I/O Apic ID : 00
+[1DFh 0479 1] Reserved : 00
+[1E0h 0480 4] Address : FEC00000
+[1E4h 0484 4] Interrupt : 00000000
+
+[1E8h 0488 1] Subtable Type : 02 [Interrupt Source Override]
+[1E9h 0489 1] Length : 0A
+[1EAh 0490 1] Bus : 00
+[1EBh 0491 1] Source : 00
+[1ECh 0492 4] Interrupt : 00000002
+[1F0h 0496 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+
+[1F2h 0498 1] Subtable Type : 02 [Interrupt Source Override]
+[1F3h 0499 1] Length : 0A
+[1F4h 0500 1] Bus : 00
+[1F5h 0501 1] Source : 05
+[1F6h 0502 4] Interrupt : 00000005
+[1FAh 0506 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[1FCh 0508 1] Subtable Type : 02 [Interrupt Source Override]
+[1FDh 0509 1] Length : 0A
+[1FEh 0510 1] Bus : 00
+[1FFh 0511 1] Source : 09
+[200h 0512 4] Interrupt : 00000009
+[204h 0516 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[206h 0518 1] Subtable Type : 02 [Interrupt Source Override]
+[207h 0519 1] Length : 0A
+[208h 0520 1] Bus : 00
+[209h 0521 1] Source : 0A
+[20Ah 0522 4] Interrupt : 0000000A
+[20Eh 0526 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[210h 0528 1] Subtable Type : 02 [Interrupt Source Override]
+[211h 0529 1] Length : 0A
+[212h 0530 1] Bus : 00
+[213h 0531 1] Source : 0B
+[214h 0532 4] Interrupt : 0000000B
+[218h 0536 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[21Ah 0538 1] Subtable Type : 04 [Local APIC NMI]
+[21Bh 0539 1] Length : 06
+[21Ch 0540 1] Processor ID : FF
+[21Dh 0541 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+[21Fh 0543 1] Interrupt Input LINT : 01
...
DSDT:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembling to symbolic ASL+ operators
+ *
+ * Disassembly of /tmp/aml-9ZXW91, Wed Aug 23 15:43:43 2023
+ *
+ * Original Table Header:
+ * Signature "DSDT"
+ * Length 0x00003271 (12913)
+ * Revision 0x01 **** 32-bit table (V1), no 64-bit math support
+ * Checksum 0xAF
+ * OEM ID "BOCHS "
+ * OEM Table ID "BXPC "
+ * OEM Revision 0x00000001 (1)
+ * Compiler ID "BXPC"
+ * Compiler Version 0x00000001 (1)
+ */
+DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
+{
+ Scope (\)
+ {
+ OperationRegion (DBG, SystemIO, 0x0402, One)
+ Field (DBG, ByteAcc, NoLock, Preserve)
+ {
+ DBGB, 8
+ }
+
+ Method (DBUG, 1, NotSerialized)
+ {
+ ToHexString (Arg0, Local0)
+ ToBuffer (Local0, Local0)
+ Local1 = (SizeOf (Local0) - One)
+ Local2 = Zero
+ While ((Local2 < Local1))
+ {
+ DBGB = DerefOf (Local0 [Local2])
+ Local2++
+ }
+
+ DBGB = 0x0A
+ }
+ }
[snip]
+ Device (\_SB.CPUS)
+ {
+ Name (_HID, "ACPI0010" /* Processor Container Device */) // _HID: Hardware ID
+ Name (_CID, EisaId ("PNP0A05") /* Generic Container Device */) // _CID: Compatible ID
+ Method (CTFY, 2, NotSerialized)
+ {
+ If ((Arg0 == Zero))
+ {
+ Notify (C000, Arg1)
+ }
+
+ If ((Arg0 == One))
+ {
+ Notify (C001, Arg1)
+ }
[snip]
+ If ((Arg0 == 0x35))
+ {
+ Notify (C035, Arg1)
+ }
+ }
[snip]
+ Processor (C000, 0x00, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (Zero))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (Zero, Arg0, Arg1, Arg2)
+ }
+ }
+
+ Processor (C001, 0x01, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (One))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (One)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (One, Arg0, Arg1, Arg2)
+ }
+ }
[snip]
+ Processor (C035, 0x35, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0x35))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x35, 0x6A, 0x01, 0x00, 0x00, 0x00 // ..5j....
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0x35)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0x35, Arg0, Arg1, Arg2)
+ }
+ }
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-8-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Zhao Liu
|
148a8a1d5f |
tests: bios-tables-test: Add test for smbios type4 core count
This tests the commit
|
||
|
Zhao Liu
|
623d26ad9a |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 core count test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be added to test the type 4 core count field. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-6-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Zhao Liu
|
c1cd1d360d |
tests: bios-tables-test: Add ACPI table binaries for smbios type4 count test
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
Changes in the tables:
FACP:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-W37791, Wed Aug 23 10:36:32 2023
+ *
+ * ACPI Data Table [FACP]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
+[004h 0004 4] Table Length : 000000F4
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : B3
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] FACS Address : 00000000
+[028h 0040 4] DSDT Address : 00000000
+[02Ch 0044 1] Model : 01
+[02Dh 0045 1] PM Profile : 00 [Unspecified]
+[02Eh 0046 2] SCI Interrupt : 0009
+[030h 0048 4] SMI Command Port : 000000B2
+[034h 0052 1] ACPI Enable Value : 02
+[035h 0053 1] ACPI Disable Value : 03
+[036h 0054 1] S4BIOS Command : 00
+[037h 0055 1] P-State Control : 00
+[038h 0056 4] PM1A Event Block Address : 00000600
+[03Ch 0060 4] PM1B Event Block Address : 00000000
+[040h 0064 4] PM1A Control Block Address : 00000604
+[044h 0068 4] PM1B Control Block Address : 00000000
+[048h 0072 4] PM2 Control Block Address : 00000000
+[04Ch 0076 4] PM Timer Block Address : 00000608
+[050h 0080 4] GPE0 Block Address : 00000620
+[054h 0084 4] GPE1 Block Address : 00000000
+[058h 0088 1] PM1 Event Block Length : 04
+[059h 0089 1] PM1 Control Block Length : 02
+[05Ah 0090 1] PM2 Control Block Length : 00
+[05Bh 0091 1] PM Timer Block Length : 04
+[05Ch 0092 1] GPE0 Block Length : 10
+[05Dh 0093 1] GPE1 Block Length : 00
+[05Eh 0094 1] GPE1 Base Offset : 00
+[05Fh 0095 1] _CST Support : 00
+[060h 0096 2] C2 Latency : 0FFF
+[062h 0098 2] C3 Latency : 0FFF
+[064h 0100 2] CPU Cache Size : 0000
+[066h 0102 2] Cache Flush Stride : 0000
+[068h 0104 1] Duty Cycle Offset : 00
+[069h 0105 1] Duty Cycle Width : 00
+[06Ah 0106 1] RTC Day Alarm Index : 00
+[06Bh 0107 1] RTC Month Alarm Index : 00
+[06Ch 0108 1] RTC Century Index : 32
+[06Dh 0109 2] Boot Flags (decoded below) : 0002
+ Legacy Devices Supported (V2) : 0
+ 8042 Present on ports 60/64 (V2) : 1
+ VGA Not Present (V4) : 0
+ MSI Not Supported (V4) : 0
+ PCIe ASPM Not Supported (V4) : 0
+ CMOS RTC Not Present (V5) : 0
+[06Fh 0111 1] Reserved : 00
+[070h 0112 4] Flags (decoded below) : 000484A5
+ WBINVD instruction is operational (V1) : 1
+ WBINVD flushes all caches (V1) : 0
+ All CPUs support C1 (V1) : 1
+ C2 works on MP system (V1) : 0
+ Control Method Power Button (V1) : 0
+ Control Method Sleep Button (V1) : 1
+ RTC wake not in fixed reg space (V1) : 0
+ RTC can wake system from S4 (V1) : 1
+ 32-bit PM Timer (V1) : 0
+ Docking Supported (V1) : 0
+ Reset Register Supported (V2) : 1
+ Sealed Case (V3) : 0
+ Headless - No Video (V3) : 0
+ Use native instr after SLP_TYPx (V3) : 0
+ PCIEXP_WAK Bits Supported (V4) : 0
+ Use Platform Timer (V4) : 1
+ RTC_STS valid on S4 wake (V4) : 0
+ Remote Power-on capable (V4) : 0
+ Use APIC Cluster Model (V4) : 1
+ Use APIC Physical Destination Mode (V4) : 0
+ Hardware Reduced (V5) : 0
+ Low Power S0 Idle (V5) : 0
+
+[074h 0116 12] Reset Register : [Generic Address Structure]
+[074h 0116 1] Space ID : 01 [SystemIO]
+[075h 0117 1] Bit Width : 08
+[076h 0118 1] Bit Offset : 00
+[077h 0119 1] Encoded Access Width : 00 [Undefined/Legacy]
+[078h 0120 8] Address : 0000000000000CF9
+
+[080h 0128 1] Value to cause reset : 0F
+[081h 0129 2] ARM Flags (decoded below) : 0000
+ PSCI Compliant : 0
+ Must use HVC for PSCI : 0
+
+[083h 0131 1] FADT Minor Revision : 00
+[084h 0132 8] FACS Address : 0000000000000000
+[08Ch 0140 8] DSDT Address : 0000000000000000
+[094h 0148 12] PM1A Event Block : [Generic Address Structure]
+[094h 0148 1] Space ID : 01 [SystemIO]
+[095h 0149 1] Bit Width : 20
+[096h 0150 1] Bit Offset : 00
+[097h 0151 1] Encoded Access Width : 00 [Undefined/Legacy]
+[098h 0152 8] Address : 0000000000000600
+
+[0A0h 0160 12] PM1B Event Block : [Generic Address Structure]
+[0A0h 0160 1] Space ID : 00 [SystemMemory]
+[0A1h 0161 1] Bit Width : 00
+[0A2h 0162 1] Bit Offset : 00
+[0A3h 0163 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0A4h 0164 8] Address : 0000000000000000
+
+[0ACh 0172 12] PM1A Control Block : [Generic Address Structure]
+[0ACh 0172 1] Space ID : 01 [SystemIO]
+[0ADh 0173 1] Bit Width : 10
+[0AEh 0174 1] Bit Offset : 00
+[0AFh 0175 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0B0h 0176 8] Address : 0000000000000604
+
+[0B8h 0184 12] PM1B Control Block : [Generic Address Structure]
+[0B8h 0184 1] Space ID : 00 [SystemMemory]
+[0B9h 0185 1] Bit Width : 00
+[0BAh 0186 1] Bit Offset : 00
+[0BBh 0187 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0BCh 0188 8] Address : 0000000000000000
+
+[0C4h 0196 12] PM2 Control Block : [Generic Address Structure]
+[0C4h 0196 1] Space ID : 00 [SystemMemory]
+[0C5h 0197 1] Bit Width : 00
+[0C6h 0198 1] Bit Offset : 00
+[0C7h 0199 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0C8h 0200 8] Address : 0000000000000000
+
+[0D0h 0208 12] PM Timer Block : [Generic Address Structure]
+[0D0h 0208 1] Space ID : 01 [SystemIO]
+[0D1h 0209 1] Bit Width : 20
+[0D2h 0210 1] Bit Offset : 00
+[0D3h 0211 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0D4h 0212 8] Address : 0000000000000608
+
+[0DCh 0220 12] GPE0 Block : [Generic Address Structure]
+[0DCh 0220 1] Space ID : 01 [SystemIO]
+[0DDh 0221 1] Bit Width : 80
+[0DEh 0222 1] Bit Offset : 00
+[0DFh 0223 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0E0h 0224 8] Address : 0000000000000620
+
+[0E8h 0232 12] GPE1 Block : [Generic Address Structure]
+[0E8h 0232 1] Space ID : 00 [SystemMemory]
+[0E9h 0233 1] Bit Width : 00
+[0EAh 0234 1] Bit Offset : 00
+[0EBh 0235 1] Encoded Access Width : 00 [Undefined/Legacy]
+[0ECh 0236 8] Address : 0000000000000000
+
...
APIC:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembly of /tmp/aml-687791, Wed Aug 23 10:36:32 2023
+ *
+ * ACPI Data Table [APIC]
+ *
+ * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
+ */
+
+[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
+[004h 0004 4] Table Length : 00000430
+[008h 0008 1] Revision : 03
+[009h 0009 1] Checksum : C5
+[00Ah 0010 6] Oem ID : "BOCHS "
+[010h 0016 8] Oem Table ID : "BXPC "
+[018h 0024 4] Oem Revision : 00000001
+[01Ch 0028 4] Asl Compiler ID : "BXPC"
+[020h 0032 4] Asl Compiler Revision : 00000001
+
+[024h 0036 4] Local Apic Address : FEE00000
+[028h 0040 4] Flags (decoded below) : 00000001
+ PC-AT Compatibility : 1
+
+[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
+[02Dh 0045 1] Length : 08
+[02Eh 0046 1] Processor ID : 00
+[02Fh 0047 1] Local Apic ID : 00
+[030h 0048 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[034h 0052 1] Subtable Type : 00 [Processor Local APIC]
+[035h 0053 1] Length : 08
+[036h 0054 1] Processor ID : 01
+[037h 0055 1] Local Apic ID : 01
+[038h 0056 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
[snip]
+[3E4h 0996 1] Subtable Type : 00 [Processor Local APIC]
+[3E5h 0997 1] Length : 08
+[3E6h 0998 1] Processor ID : 77
+[3E7h 0999 1] Local Apic ID : 9E
+[3E8h 1000 4] Flags (decoded below) : 00000000
+ Processor Enabled : 0
+ Runtime Online Capable : 0
+
+[3ECh 1004 1] Subtable Type : 01 [I/O APIC]
+[3EDh 1005 1] Length : 0C
+[3EEh 1006 1] I/O Apic ID : 00
+[3EFh 1007 1] Reserved : 00
+[3F0h 1008 4] Address : FEC00000
+[3F4h 1012 4] Interrupt : 00000000
+
+[3F8h 1016 1] Subtable Type : 02 [Interrupt Source Override]
+[3F9h 1017 1] Length : 0A
+[3FAh 1018 1] Bus : 00
+[3FBh 1019 1] Source : 00
+[3FCh 1020 4] Interrupt : 00000002
+[400h 1024 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+
+[402h 1026 1] Subtable Type : 02 [Interrupt Source Override]
+[403h 1027 1] Length : 0A
+[404h 1028 1] Bus : 00
+[405h 1029 1] Source : 05
+[406h 1030 4] Interrupt : 00000005
+[40Ah 1034 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[40Ch 1036 1] Subtable Type : 02 [Interrupt Source Override]
+[40Dh 1037 1] Length : 0A
+[40Eh 1038 1] Bus : 00
+[40Fh 1039 1] Source : 09
+[410h 1040 4] Interrupt : 00000009
+[414h 1044 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[416h 1046 1] Subtable Type : 02 [Interrupt Source Override]
+[417h 1047 1] Length : 0A
+[418h 1048 1] Bus : 00
+[419h 1049 1] Source : 0A
+[41Ah 1050 4] Interrupt : 0000000A
+[41Eh 1054 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[420h 1056 1] Subtable Type : 02 [Interrupt Source Override]
+[421h 1057 1] Length : 0A
+[422h 1058 1] Bus : 00
+[423h 1059 1] Source : 0B
+[424h 1060 4] Interrupt : 0000000B
+[428h 1064 2] Flags (decoded below) : 000D
+ Polarity : 1
+ Trigger Mode : 3
+
+[42Ah 1066 1] Subtable Type : 04 [Local APIC NMI]
+[42Bh 1067 1] Length : 06
+[42Ch 1068 1] Processor ID : FF
+[42Dh 1069 2] Flags (decoded below) : 0000
+ Polarity : 0
+ Trigger Mode : 0
+[42Fh 1071 1] Interrupt Input LINT : 01
+
...
DSDT:
+/*
+ * Intel ACPI Component Architecture
+ * AML/ASL+ Disassembler version 20200925 (64-bit version)
+ * Copyright (c) 2000 - 2020 Intel Corporation
+ *
+ * Disassembling to symbolic ASL+ operators
+ *
+ * Disassembly of /tmp/aml-8G8791, Wed Aug 23 10:36:32 2023
+ *
+ * Original Table Header:
+ * Signature "DSDT"
+ * Length 0x0000489D (18589)
+ * Revision 0x01 **** 32-bit table (V1), no 64-bit math support
+ * Checksum 0xDB
+ * OEM ID "BOCHS "
+ * OEM Table ID "BXPC "
+ * OEM Revision 0x00000001 (1)
+ * Compiler ID "BXPC"
+ * Compiler Version 0x00000001 (1)
+ */
+DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
+{
+ Scope (\)
+ {
+ OperationRegion (DBG, SystemIO, 0x0402, One)
+ Field (DBG, ByteAcc, NoLock, Preserve)
+ {
+ DBGB, 8
+ }
+
+ Method (DBUG, 1, NotSerialized)
+ {
+ ToHexString (Arg0, Local0)
+ ToBuffer (Local0, Local0)
+ Local1 = (SizeOf (Local0) - One)
+ Local2 = Zero
+ While ((Local2 < Local1))
+ {
+ DBGB = DerefOf (Local0 [Local2])
+ Local2++
+ }
+
+ DBGB = 0x0A
+ }
+ }
+
[snip]
+
+ Processor (C000, 0x00, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (Zero))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (Zero, Arg0, Arg1, Arg2)
+ }
+ }
+
+ Processor (C001, 0x01, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (One))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (One)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (One, Arg0, Arg1, Arg2)
+ }
+ }
[snip]
+ Processor (C077, 0x77, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0x77))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x77, 0x9E, 0x01, 0x00, 0x00, 0x00 // ..w.....
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0x77)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0x77, Arg0, Arg1, Arg2)
+ }
+ }
+ }
+ }
+
...
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231023094635.1588282-5-zhao1.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Zhao Liu
|
df210963a1 |
tests: bios-tables-test: Add test for smbios type4 count
This tests the commit
|
||
|
Zhao Liu
|
6c7937ece9 |
tests: bios-tables-test: Prepare the ACPI table change for smbios type4 count test
Following the guidelines in tests/qtest/bios-tables-test.c, this is step 1 - 3. List the ACPI tables that will be added to test the type 4 count. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20231023094635.1588282-3-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Hyman Huang
|
17257b90be |
tests: Add migration dirty-limit capability test
Add migration dirty-limit capability test if kernel support dirty ring. Migration dirty-limit capability introduce dirty limit capability, two parameters: x-vcpu-dirty-limit-period and vcpu-dirty-limit are introduced to implement the live migration with dirty limit. The test case does the following things: 1. start src, dst vm and enable dirty-limit capability 2. start migrate and set cancel it to check if dirty limit stop working. 3. restart dst vm 4. start migrate and enable dirty-limit capability 5. check if migration satisfy the convergence condition during pre-switchover phase. Note that this test case involves many passes, so it runs in slow mode only. Signed-off-by: Hyman Huang <yong.huang@smartx.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <e55a302df9da7dbc00ad825f47f57c1a756d303e.1698847223.git.yong.huang@smartx.com> |
||
|
Stefan Hajnoczi
|
d762bf9793 |
target-arm queue:
* linux-user/elfload: Add missing arm64 hwcap values * stellaris-gamepad: Convert to qdev * docs/specs: Convert various txt docs to rST * MAINTAINERS: Make sure that gicv3_internal.h is covered, too * hw/arm/pxa2xx_gpio: Pass CPU using QOM link property * hw/watchdog/wdt_imx2: Trace MMIO access and timer activity * hw/misc/imx7_snvs: Trace MMIO access * hw/misc/imx6_ccm: Convert DPRINTF to trace events * hw/i2c/pm_smbus: Convert DPRINTF to trace events * target/arm: Enable FEAT_MOPS insns in user-mode emulation * linux-user: Report AArch64 hwcap2 fields above bit 31 * target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly * target/arm: Fix SVE STR increment * hw/char/stm32f2xx_usart: implement TX interrupts * target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk * xlnx-versal-virt: Add AMD/Xilinx TRNG device -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmVD3hEZHHBldGVyLm1h eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3kuRD/4mLL2DB+yvQJrzSvUlrjfi /orPDrY9xEQ7ln2YpNqc2BZ4wAgh947yk/ae5+lyACQcBhCPiwMyVK1bBscNxkgA 8YPmuugNem/64+IHiKkz6aroqjvC83dUzJ9R5O9ctV70mgrX32YnhXNkkYVI81Ar bEwBznyYeCiy8ZafVxc2m70fiBOlurb6htYYdt7VHsgB0ozK/80UmuFI6exOKt1r oVyYouMaidNV/AoqZBGSKT2UFvFmI57PWN0YQD8CMECLsB/mBE9TEzSvLRdlOB4G qI5hgEJks61qDL6+YMJ+hskxW+D3g3I1WjuyqhKfiAzcKmmTAp1NsiiDtva8yBzX lDUXc6bPomalrKo1SPsooJv9r4uE3hCayDOlR+qM38DL4j2soSd3QIP7dCzERbZx snrD+ZTtgXtomUN8ojbnOK+kClEfURZ+wALbUEXwAh1sBwrKBxaD4ss4lA2esq10 HJPjBJzAWoSmK2DY6GWt2xIa+GvQwdPnxMpHbp3yAddGP7i/lHM0x60q5YpjHV++ DHaZmLBA7L9wcvT1VrwmieJaB+ADcSfkzBz2KznC4usdEY8BiJhjdRAzkqdGZWV5 HKEg8QwMYHg4QRUoZxW/XdtVzdqcjO5pTSUr3HUE+85sum2e9Yee6rybg1W/EWYv 7SnVkD5zG1BU268/p5k6UA== =OgfH -----END PGP SIGNATURE----- Merge tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * linux-user/elfload: Add missing arm64 hwcap values * stellaris-gamepad: Convert to qdev * docs/specs: Convert various txt docs to rST * MAINTAINERS: Make sure that gicv3_internal.h is covered, too * hw/arm/pxa2xx_gpio: Pass CPU using QOM link property * hw/watchdog/wdt_imx2: Trace MMIO access and timer activity * hw/misc/imx7_snvs: Trace MMIO access * hw/misc/imx6_ccm: Convert DPRINTF to trace events * hw/i2c/pm_smbus: Convert DPRINTF to trace events * target/arm: Enable FEAT_MOPS insns in user-mode emulation * linux-user: Report AArch64 hwcap2 fields above bit 31 * target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly * target/arm: Fix SVE STR increment * hw/char/stm32f2xx_usart: implement TX interrupts * target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk * xlnx-versal-virt: Add AMD/Xilinx TRNG device * tag 'pull-target-arm-20231102' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits) tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device hw/arm: xlnx-versal-virt: Add AMD/Xilinx TRNG device hw/misc: Introduce AMD/Xilix Versal TRNG device target/arm: Correctly propagate stage 1 BTI guarded bit in a two-stage walk hw/char/stm32f2xx_usart: Add more definitions for CR1 register hw/char/stm32f2xx_usart: Update IRQ when DR is written hw/char/stm32f2xx_usart: Extract common IRQ update code to update_irq() target/arm: Fix SVE STR increment target/arm: Make FEAT_MOPS SET* insns handle Xs == XZR correctly linux-user: Report AArch64 hwcap2 fields above bit 31 target/arm: Enable FEAT_MOPS insns in user-mode emulation hw/i2c/pm_smbus: Convert DPRINTF to trace events hw/misc/imx6_ccm: Convert DPRINTF to trace events hw/misc/imx7_snvs: Trace MMIO access hw/watchdog/wdt_imx2: Trace timer activity hw/watchdog/wdt_imx2: Trace MMIO access hw/arm/pxa2xx_gpio: Pass CPU using QOM link property MAINTAINERS: Make sure that gicv3_internal.h is covered, too docs/specs/vmgenid: Convert to rST docs/specs/vmcoreinfo: Convert to rST ... Conflicts: hw/input/stellaris_input.c The qdev conversion in this pull request ("stellaris-gamepad: Convert to qdev") eliminates the vmstate_register() call that was converted to vmstate_register_any() in the conflicting migration pull request. vmstate_register_any() is no longer necessary now that this device has been converted to qdev, so take this pull request's version of stellaris_gamepad.c over the previous pull request's stellaris_input.c (the file was renamed). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
||
|
Tong Ho
|
1c98a821a2 |
tests/qtest: Introduce tests for AMD/Xilinx Versal TRNG device
Signed-off-by: Tong Ho <tong.ho@amd.com> Message-id: 20231031184611.3029156-4-tong.ho@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> |
||
|
Het Gala
|
8e3766eefb |
migration: modify test_multifd_tcp_none() to use new QAPI syntax.
modify multifd tcp common test to incorporate the new QAPI syntax defined. Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com> Signed-off-by: Het Gala <het.gala@nutanix.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231023182053.8711-15-farosas@suse.de> |
||
|
Fabiano Rosas
|
7bca2bb7bf |
tests/migration-test: Add a test for postcopy hangs during RECOVER
To do so, create two paired sockets, but make them not providing real data. Feed those fake sockets to src/dst QEMUs for recovery to let them go into RECOVER stage without going out. Test that we can always kick it out and recover again with the right ports. This patch is based on Fabiano's version here: https://lore.kernel.org/r/877cowmdu0.fsf@suse.de Signed-off-by: Fabiano Rosas <farosas@suse.de> [peterx: write commit message, remove case 1, fix bugs, and more] Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231017202633.296756-4-peterx@redhat.com> |
||
|
Steve Sistare
|
e7b428d6bc |
tests/qtest: migration: add reboot mode test
[ Maintainer note: I put the test as flaky because our CI has problems with shared memory. We will remove the flaky bits as soon as we get a solution. ] Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <1698263069-406971-7-git-send-email-steven.sistare@oracle.com> |
||
|
Stefan Hajnoczi
|
235fe6d06e |
ufs-next-pull-request
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmU/DfoACgkQEuIgTA5d tgKZ3g/+J38LTaktLPgUb0Kg390anPkIAkqqA1QZC8lC/FRSEWpgsNBqcvAASNTl jj1c80k/+Dvf9Ti1lmDNkuYczCFvKNJZQ1iRHmv2wc79A01GV0Ue6xayQjjNjoKK SBMIsFpArmFQjR2wGlkRc8PXha1JyWrsD4iPY6ZqedEcyuueLx69XbLL37FfVbQt 5IMnDqGkLCmrGowAjwurq2UM5IiYjeB4I5OwUgJC526zlyngXTFJimCWS6b2uUBk Yg1PnFffBsh11Pwmq4IZ1DAv3Bv/gFovenuatFqZrgqtfK7tEiARInIEsctu0U0a hPK/KojJAPF/cfMssRm1D1GCfsXM4tP2yFY/6q0wTRr9Dod8OSjlvfJR7+ez71/j aoY4N/nYYrZ6+pQNsPJcuBqQdtjdNUp4gUHx5qYxwwqZcHK4ubxpIvstmxceoLEX 3PG4O1iAapc/aL12ww9bYJ2lrbKGx7ZJU/Ij8bud8tYzLheG3xaYUEhonk7DE6+e AXFSad5CJTIF9Duh1uAMe1sV9GxELV8MHZSalqfGOhWYp7LzUBgouEJ1gQdOQbTK VsLs48WQ23OjWNKyAMaXQXdFO4FVbsjIg9nQXEHNRPkUownVHNVL8zu6EsXvHfch u691ygt5pD100SYdcDv73xTSeqP/rxqyYdxJl4LRkv/hGWU4y78= =Oisg -----END PGP SIGNATURE----- Merge tag 'pull-ufs-20231030' of https://gitlab.com/jeuk20.kim/qemu into staging ufs-next-pull-request # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmU/DfoACgkQEuIgTA5d # tgKZ3g/+J38LTaktLPgUb0Kg390anPkIAkqqA1QZC8lC/FRSEWpgsNBqcvAASNTl # jj1c80k/+Dvf9Ti1lmDNkuYczCFvKNJZQ1iRHmv2wc79A01GV0Ue6xayQjjNjoKK # SBMIsFpArmFQjR2wGlkRc8PXha1JyWrsD4iPY6ZqedEcyuueLx69XbLL37FfVbQt # 5IMnDqGkLCmrGowAjwurq2UM5IiYjeB4I5OwUgJC526zlyngXTFJimCWS6b2uUBk # Yg1PnFffBsh11Pwmq4IZ1DAv3Bv/gFovenuatFqZrgqtfK7tEiARInIEsctu0U0a # hPK/KojJAPF/cfMssRm1D1GCfsXM4tP2yFY/6q0wTRr9Dod8OSjlvfJR7+ez71/j # aoY4N/nYYrZ6+pQNsPJcuBqQdtjdNUp4gUHx5qYxwwqZcHK4ubxpIvstmxceoLEX # 3PG4O1iAapc/aL12ww9bYJ2lrbKGx7ZJU/Ij8bud8tYzLheG3xaYUEhonk7DE6+e # AXFSad5CJTIF9Duh1uAMe1sV9GxELV8MHZSalqfGOhWYp7LzUBgouEJ1gQdOQbTK # VsLs48WQ23OjWNKyAMaXQXdFO4FVbsjIg9nQXEHNRPkUownVHNVL8zu6EsXvHfch # u691ygt5pD100SYdcDv73xTSeqP/rxqyYdxJl4LRkv/hGWU4y78= # =Oisg # -----END PGP SIGNATURE----- # gpg: Signature made Mon 30 Oct 2023 10:59:22 JST # gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602 # gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown] # gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602 * tag 'pull-ufs-20231030' of https://gitlab.com/jeuk20.kim/qemu: hw/ufs: Modify lu.c to share codes with SCSI subsystem Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
||
|
Jeuk Kim
|
096434fea1 |
hw/ufs: Modify lu.c to share codes with SCSI subsystem
This patch removes the code that ufs-lu was duplicating from scsi-hd and allows them to share code. It makes ufs-lu have a virtual scsi-bus and scsi-hd internally. This allows scsi related commands to be passed thorugh to the scsi-hd. The query request and nop command work the same as the existing logic. Well-known lus do not have a virtual scsi-bus and scsi-hd, and handle the necessary scsi commands by emulating them directly. Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com> |
||
|
Vladimir Sementsov-Ogievskiy
|
1aa84a4b6e |
ipmi-bt-test: force ipv4
We open ipv4 listening socket. But "localhost" in qemu parameters may load to Qemu trying to connect with ipv6 and fail with "Connection refused". Force ipv4 by using ipv4 ip address. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Message-ID: <20231018191123.1176602-1-vsementsov@yandex-team.ru> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Philippe Mathieu-Daudé
|
ec3ad0face |
tests/npcm7xx_adc: Clean up global variable shadowing
Rename the global 'adc' variable in order to avoid:
tests/qtest/npcm7xx_adc-test.c:98:58: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static uint32_t adc_read_con(QTestState *qts, const ADC *adc)
^
tests/qtest/npcm7xx_adc-test.c:103:55: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void adc_write_con(QTestState *qts, const ADC *adc, uint32_t value)
^
tests/qtest/npcm7xx_adc-test.c:108:59: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static uint32_t adc_read_data(QTestState *qts, const ADC *adc)
^
tests/qtest/npcm7xx_adc-test.c:119:53: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void adc_qom_set(QTestState *qts, const ADC *adc,
^
tests/qtest/npcm7xx_adc-test.c:135:57: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void adc_write_input(QTestState *qts, const ADC *adc,
^
tests/qtest/npcm7xx_adc-test.c:144:56: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void adc_write_vref(QTestState *qts, const ADC *adc, uint32_t value)
^
tests/qtest/npcm7xx_adc-test.c:162:59: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static uint32_t adc_prescaler(QTestState *qts, const ADC *adc)
^
tests/qtest/npcm7xx_adc-test.c:175:64: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void adc_wait_conv_finished(QTestState *qts, const ADC *adc,
^
tests/qtest/npcm7xx_adc-test.c:196:16: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const ADC *adc = adc_p;
^
tests/qtest/npcm7xx_adc-test.c:207:16: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const ADC *adc = adc_p;
^
tests/qtest/npcm7xx_adc-test.c:235:16: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const ADC *adc = adc_p;
^
tests/qtest/npcm7xx_adc-test.c:267:16: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const ADC *adc = adc_p;
^
tests/qtest/npcm7xx_adc-test.c:293:16: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const ADC *adc = adc_p;
^
tests/qtest/npcm7xx_adc-test.c:311:16: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
const ADC *adc = adc_p;
^
tests/qtest/npcm7xx_adc-test.c:93:5: note: previous declaration is here
ADC adc = {
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231009100251.56019-8-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
||
|
Philippe Mathieu-Daudé
|
a186fedbef |
tests/rtl8139: Clean up global variable shadowing
Rename the variable to fix:
tests/qtest/rtl8139-test.c:28:33: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void save_fn(QPCIDevice *dev, int devfn, void *data)
^
tests/qtest/rtl8139-test.c:37:17: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
QPCIDevice *dev;
^
tests/qtest/rtl8139-test.c:25:20: note: previous declaration is here
static QPCIDevice *dev;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231009100251.56019-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
||
|
Philippe Mathieu-Daudé
|
e33ba60bdb |
tests/cdrom-test: Clean up global variable shadowing in prepare_image()
Rename the variable to fix:
tests/qtest/cdrom-test.c:40:50: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static int prepare_image(const char *arch, char *isoimage)
^
tests/qtest/cdrom-test.c:18:13: note: previous declaration is here
static char isoimage[] = "cdrom-boot-iso-XXXXXX";
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-ID: <20231009100251.56019-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
||
|
Philippe Mathieu-Daudé
|
79a8d00073 |
tests/virtio-scsi: Clean up global variable shadowing
Rename the (unused) 'allow' argument, following the pattern
used by the other tests in this file. This fixes:
tests/qtest/virtio-scsi-test.c:159:61: error: declaration shadows a variable in the global scope [-Werror,-Wshadow]
static void hotplug(void *obj, void *data, QGuestAllocator *alloc)
^
tests/qtest/virtio-scsi-test.c:37:25: note: previous declaration is here
static QGuestAllocator *alloc;
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-By: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231009100251.56019-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
||
|
Fabiano Rosas
|
7789331b03 |
tests/qtest: Don't print messages from query instances
Now that we can query more than one binary, the "starting QEMU..." message can get a little noisy. Mute those messages unless we're running with --verbose. Only affects qtest_init() calls from within libqtest. The tests continue to output as usual. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Message-ID: <20231018192741.25885-13-farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> |
||
|
Fabiano Rosas
|
6c6d2330a0 |
tests/qtest/migration: Allow user to specify a machine type
Accept the QTEST_QEMU_MACHINE_TYPE environment variable to take a machine type to use in the tests. The full machine type is recognized (e.g. pc-q35-8.2). Aliases (e.g. pc) are also allowed and resolve to the latest machine version for that alias, or, if using two QEMU binaries, to the latest common machine version between the two. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-12-farosas@suse.de> |
||
|
Fabiano Rosas
|
5050ad2a38 |
tests/qtest/migration: Support more than one QEMU binary
We have strict rules around migration compatibility between different QEMU versions but no test to validate the migration state between different binaries. Add infrastructure to allow running the migration tests with two different QEMU binaries as migration source and destination. The code now recognizes two new environment variables QTEST_QEMU_BINARY_SRC and QTEST_QEMU_BINARY_DST. In the absence of either of them, the test will use the QTEST_QEMU_BINARY variable. If both are missing then the tests are run with single binary as previously. The machine type is selected automatically as the latest machine type version that works with both binaries. Usage (only one of SRC|DST is allowed): QTEST_QEMU_BINARY_SRC=../build-8.2.0/qemu-system-x86_64 \ QTEST_QEMU_BINARY=../build-8.1.0/qemu-system-x86_64 \ ./tests/qtest/migration-test Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-11-farosas@suse.de> |
||
|
Fabiano Rosas
|
fa35b0cb25 |
tests/qtest/migration: Set q35 as the default machine for x86_86
Change the x86_64 to use the q35 machines in tests from now on. Keep testing the pc macine on 32bit. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-10-farosas@suse.de> |
||
|
Fabiano Rosas
|
3cb9c6553b |
tests/qtest/migration: Specify the geometry of the bootsector
We're about to enable the x86_64 tests to run with the q35 machine, but that machine does not work with the program we use to dirty the memory for the tests. The issue is that QEMU needs to guess the geometry of the "disk" we give to it and the guessed geometry doesn't pass the sanity checks done by SeaBIOS. This causes SeaBIOS to interpret the geometry as if needing a translation from LBA to CHS and SeaBIOS ends up miscomputing the number of cylinders and aborting due to that. The reason things work with the "pc" machine is that is uses ATA instead of AHCI like q35 and SeaBIOS has an exception for ATA that ends up skipping the sanity checks and ignoring translation altogether. Workaround this situation by specifying a geometry in the command line. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-9-farosas@suse.de> |
||
|
Fabiano Rosas
|
c996139101 |
tests/qtest/migration: Define a machine for all architectures
Stop relying on defaults and select a machine explicitly for every architecture. This is a prerequisite for being able to select machine types for migration using different QEMU binaries for source and destination. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-8-farosas@suse.de> |
||
|
Fabiano Rosas
|
dcf389cbc8 |
tests/qtest/migration: Introduce find_common_machine_version
When using two different QEMU binaries for migration testing, we'll need to find what is the machine version that will work with both binaries. Add a helper for that. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-7-farosas@suse.de> |
||
|
Fabiano Rosas
|
a3c0ebc9b0 |
tests/qtest: Introduce qtest_resolve_machine_alias
The migration tests are being enhanced to test migration between different QEMU versions. A requirement of migration is that the machine type between source and destination matches, including the version. We cannot hardcode machine types in the tests because those change with each release. QEMU provides a machine type alias that has a fixed name, but points to the latest machine type at each release. Add a helper to resolve the alias into the exact machine type. E.g. "-machine pc" resolves to "pc-i440fx-8.2" Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-6-farosas@suse.de> |
||
|
Fabiano Rosas
|
1027fc0ae4 |
tests/qtest: Introduce qtest_has_machine_with_env
Add a variant of qtest_has_machine() that receives an environment variable containing an alternate QEMU binary path. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-5-farosas@suse.de> |
||
|
Fabiano Rosas
|
41b2eba4e5 |
tests/qtest: Allow qtest_get_machines to use an alternate QEMU binary
We're adding support for using more than one QEMU binary in tests. Modify qtest_get_machines() to take an environment variable that contains the QEMU binary path. Since the function keeps a cache of the machines list in the form of a static variable, refresh it any time the environment variable changes. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-4-farosas@suse.de> |
||
|
Fabiano Rosas
|
9931215bd3 |
tests/qtest: Introduce qtest_init_with_env
Add a version of qtest_init() that takes an environment variable containing the path of the QEMU binary. This allows tests to use more than one QEMU binary. If no variable is provided or the environment variable does not exist, that is not an error. Fallback to using QTEST_QEMU_BINARY. Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-3-farosas@suse.de> |
||
|
Fabiano Rosas
|
f4a7b30fcd |
tests/qtest: Allow qtest_qemu_binary to use a custom environment variable
We're adding support for testing migration using two different QEMU binaries. We'll provide the second binary in a new environment variable. Allow qtest_qemu_binary() to receive the name of the new variable. If the new environment variable is not set, that's not an error, we use QTEST_QEMU_BINARY as a fallback. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231018192741.25885-2-farosas@suse.de> |
||
|
Thomas Huth
|
04131e0009 |
tests/qtest/migration-test: Disable the analyze-migration.py test on s390x
The analyze-migration.py script fails on s390x hosts:
Traceback (most recent call last):
File "scripts/analyze-migration.py", line 662, in <module>
dump.read(dump_memory = args.memory)
File "scripts/analyze-migration.py", line 596, in read
classdesc = self.section_classes[section_key]
KeyError: ('s390-storage_attributes', 0)
It obviously never has been adapted to s390x yet, so until this
has been done, disable this test on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018091239.164452-1-thuth@redhat.com>
|
||
|
Fabiano Rosas
|
3dc35470c8 |
tests/qtest: migration-test: Add tests for file-based migration
Add basic tests for file-based migration. Note that we cannot use test_precopy_common because that routine expects it to be possible to run the migration live. With the file transport there is no live migration because we must wait for the source to finish writing the migration data to the file before the destination can start reading. Add a new migration function specifically to handle the file migration. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20230712190742.22294-7-farosas@suse.de> |
||
|
Fabiano Rosas
|
d864756e87 |
tests/qtest/migration: Add a test for the analyze-migration script
Add a smoke test that migrates to a file and gives it to the script. It should catch the most annoying errors such as changes in the ram flags. After code has been merged it becomes way harder to figure out what is causing the script to fail, the person making the change is the most likely to know right away what the problem is. Signed-off-by: Fabiano Rosas <farosas@suse.de> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20231009184326.15777-7-farosas@suse.de> |
||
|
Stefan Hajnoczi
|
2778f754e6 |
hw/ufs: fixes
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmUozswACgkQEuIgTA5d tgITExAAo0BSNir4I5MfeNIjZTNNdxLXDl0+92JyairB2m/gWH/02jGtrJBYp5On ELnixKj2Ntn9IIRr3NwQHNTnDOZHRkUBH+pRVeMbZ+IWLjEoWQdl03ge7e9sHai3 CLXB4HPSnXddy1SmS9FEkdBWopqxKF4BLZnpAfwh/dj2fzSyDyNIMmGoRimRQhph 9A90304ERUdpREAXncTgSdXeDZz+lScadzUJZrPPiG2ZHXL+qzDCX7ojEnNaUFxz W1IfriI8oeeORfCQaNEOncLKhSwE1WscGxP0vILPApKOu251tObgSbK90QlQR2qT BMl7k4BDfYeksXMGc0BXVFrOfv1ud86NlCE2OokK6HBZVuHio4C6TU/t65MC4Rw5 mJ8CPgbN+7sgVmAGo0sLYzI6GiRR27VqqLh6KXVAa5c/fAdt5pHSkakwSvxiXsAl EqskmOY2em5O//+7CWN1CtY+I2pHyltMXAi3Cb2vjweNx88kuhmxFQWeZVI10/H3 gNrNfu32+ihDLMqR7uQamdAZV0lnIwp97nCbf3LzpM0btjl70QvGZhsbiCDiLQrG mJjnaix4xDb8T21WKrI8DKcwR4rvD8hZsCUp31XJnA8HWtdPnEQldK8NEGNlU5ye lrGc6gxiwZLCBBIj9lwbZW3Zv9Vz9jNWISOmY+KWLCIus98DBxQ= =XXsQ -----END PGP SIGNATURE----- Merge tag 'pull-ufs-20231013' of https://gitlab.com/jeuk20.kim/qemu into staging hw/ufs: fixes # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmUozswACgkQEuIgTA5d # tgITExAAo0BSNir4I5MfeNIjZTNNdxLXDl0+92JyairB2m/gWH/02jGtrJBYp5On # ELnixKj2Ntn9IIRr3NwQHNTnDOZHRkUBH+pRVeMbZ+IWLjEoWQdl03ge7e9sHai3 # CLXB4HPSnXddy1SmS9FEkdBWopqxKF4BLZnpAfwh/dj2fzSyDyNIMmGoRimRQhph # 9A90304ERUdpREAXncTgSdXeDZz+lScadzUJZrPPiG2ZHXL+qzDCX7ojEnNaUFxz # W1IfriI8oeeORfCQaNEOncLKhSwE1WscGxP0vILPApKOu251tObgSbK90QlQR2qT # BMl7k4BDfYeksXMGc0BXVFrOfv1ud86NlCE2OokK6HBZVuHio4C6TU/t65MC4Rw5 # mJ8CPgbN+7sgVmAGo0sLYzI6GiRR27VqqLh6KXVAa5c/fAdt5pHSkakwSvxiXsAl # EqskmOY2em5O//+7CWN1CtY+I2pHyltMXAi3Cb2vjweNx88kuhmxFQWeZVI10/H3 # gNrNfu32+ihDLMqR7uQamdAZV0lnIwp97nCbf3LzpM0btjl70QvGZhsbiCDiLQrG # mJjnaix4xDb8T21WKrI8DKcwR4rvD8hZsCUp31XJnA8HWtdPnEQldK8NEGNlU5ye # lrGc6gxiwZLCBBIj9lwbZW3Zv9Vz9jNWISOmY+KWLCIus98DBxQ= # =XXsQ # -----END PGP SIGNATURE----- # gpg: Signature made Fri 13 Oct 2023 00:59:56 EDT # gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602 # gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown] # gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602 * tag 'pull-ufs-20231013' of https://gitlab.com/jeuk20.kim/qemu: hw/ufs: Fix incorrect register fields hw/ufs: Fix code coverity issues Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
||
|
Jeuk Kim
|
97970dae53 |
hw/ufs: Fix code coverity issues
Fixed four ufs-related coverity issues. The coverity issues and fixes are as follows 1. CID 1519042: Security issue with the rand() function Changed to use a fixed value (0xab) instead of rand() as the value for testing 2. CID 1519043: Dereference after null check Removed useless (redundant) null checks 3. CID 1519050: Out-of-bounds access issue Fix to pass an array type variable to find_first_bit and find_next_bit using DECLARE_BITMAP() 4. CID 1519051: Out-of-bounds read issue Fix incorrect range check for lun Fix coverity CID: 1519042 1519043 1519050 1519051 Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com> |
||
|
Chris Rauer
|
d0353b6e7b |
tests/qtest: Fix npcm7xx_timer-test.c flaky test
npcm7xx_timer-test occasionally fails due to the state of the timers from the previous test iteration. Advancing the clock step after the reset resolves this issue. Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1897 Signed-off-by: Chris Rauer <crauer@google.com> Message-ID: <20230929000831.691559-1-crauer@google.com> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Fabiano Rosas
|
5274274c26 |
tests/qtest: migration: Add support for negative testing of qmp_migrate
There is currently no way to write a test for errors that happened in qmp_migrate before the migration has started. Add a version of qmp_migrate that ensures an error happens. To make use of it a test needs to set MigrateCommon.result as MIG_TEST_QMP_ERROR. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20230712190742.22294-6-farosas@suse.de> |
||
|
Fabiano Rosas
|
6830e53b4b |
tests/qtest: migration: Use migrate_incoming_qmp where appropriate
Use the new migrate_incoming_qmp helper in the places that currently open-code calling migrate-incoming. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20230712190742.22294-4-farosas@suse.de> |
||
|
Fabiano Rosas
|
28fa97e006 |
tests/qtest: migration: Add migrate_incoming_qmp helper
file-based migration requires the target to initiate its migration after the source has finished writing out the data in the file. Currently there's no easy way to initiate 'migrate-incoming', allow this by introducing migrate_incoming_qmp helper, similarly to migrate_qmp. Also make sure migration events are enabled and wait for the incoming migration to start before returning. This avoid a race when querying the migration status too soon after issuing the command. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20230712190742.22294-3-farosas@suse.de> |
||
|
Fabiano Rosas
|
9d47929034 |
tests/qtest: migration: Expose migrate_set_capability
The following patch will make use of this function from within migrate-helpers.c, so move it there. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-ID: <20230712190742.22294-2-farosas@suse.de> |
||
|
Stefan Hajnoczi
|
0ad0d9dcd1 |
seabios: update to git snapshot
Give seabios a bit real world testing before tagging a release. Update to release will follow later in the devel cycle. v3: update mmio64 acpi test. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmUlNMUACgkQTLbY7tPo cTgp5RAA154WTGRGEoBveu8ocIVNzPxDB8esLBDmsQ7VSKo6e7wJvS+IyPBVYDSW O0p8Hr/2WlXV1BA1pVUyxzEN4AwqiRDBw4Elir6n//MF7r0wR84401hz6er+4O8j U/xkMXPL/mVV+dulNq+ACjt0nRWIQgdlxEnIl9AY7Nbx3l8NM70PrxRbiG/CtRUz gJW3uDU5xRWWGsI7tO8ZEuB2RRQ9B1uCw2ljx9QbxDonJABLUe6YVOI/QhBboX4B 2lIezGxRzDwvCdgHXCraakm0ZE6fL9FlHJ4tyapWt21ggkHA6+5oPcx/zisNuCIy EMiu6p7ttlC3AiaXUmjdCYboRzNKV+S6NvweqzQis5aUedomuFDt3yKo8BqHdzkO uxSFbzpVxXzSXer1OlRZfVGxME35oyfPfeRPVNpef4zg/XdtOeAhckMVHr72QqEd pRyR2x+CTxzJ2SsbQ21AS+0PUtEa3JHcna6VMlblCO4uRppb/cnpq6SA2m343PCB D9IVgtui7+VEbaTxMmkUfOLTP/+QQnF6KOCcOlGtB6HjzqNfJnwuu2k6RsYCkdZf 3tJIdVv72LsopZNHYrqm7iU3XpEBGqFdv3Dq3pm35uW1nRKBdr2VQPjANfttHKxd pUFve1EObHDRTbEFXI0ALvdlDLSX/54McTFF9BKuRPyuxJKyvPM= =7FXs -----END PGP SIGNATURE----- Merge tag 'firmware/seabios-20231010-pull-request' of https://gitlab.com/kraxel/qemu into staging seabios: update to git snapshot Give seabios a bit real world testing before tagging a release. Update to release will follow later in the devel cycle. v3: update mmio64 acpi test. # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmUlNMUACgkQTLbY7tPo # cTgp5RAA154WTGRGEoBveu8ocIVNzPxDB8esLBDmsQ7VSKo6e7wJvS+IyPBVYDSW # O0p8Hr/2WlXV1BA1pVUyxzEN4AwqiRDBw4Elir6n//MF7r0wR84401hz6er+4O8j # U/xkMXPL/mVV+dulNq+ACjt0nRWIQgdlxEnIl9AY7Nbx3l8NM70PrxRbiG/CtRUz # gJW3uDU5xRWWGsI7tO8ZEuB2RRQ9B1uCw2ljx9QbxDonJABLUe6YVOI/QhBboX4B # 2lIezGxRzDwvCdgHXCraakm0ZE6fL9FlHJ4tyapWt21ggkHA6+5oPcx/zisNuCIy # EMiu6p7ttlC3AiaXUmjdCYboRzNKV+S6NvweqzQis5aUedomuFDt3yKo8BqHdzkO # uxSFbzpVxXzSXer1OlRZfVGxME35oyfPfeRPVNpef4zg/XdtOeAhckMVHr72QqEd # pRyR2x+CTxzJ2SsbQ21AS+0PUtEa3JHcna6VMlblCO4uRppb/cnpq6SA2m343PCB # D9IVgtui7+VEbaTxMmkUfOLTP/+QQnF6KOCcOlGtB6HjzqNfJnwuu2k6RsYCkdZf # 3tJIdVv72LsopZNHYrqm7iU3XpEBGqFdv3Dq3pm35uW1nRKBdr2VQPjANfttHKxd # pUFve1EObHDRTbEFXI0ALvdlDLSX/54McTFF9BKuRPyuxJKyvPM= # =7FXs # -----END PGP SIGNATURE----- # gpg: Signature made Tue 10 Oct 2023 07:25:57 EDT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * tag 'firmware/seabios-20231010-pull-request' of https://gitlab.com/kraxel/qemu: tests/acpi: disable tests/data/acpi/q35/DSDT.mmio64 updates tests/acpi: update expected data files seabios: update binaries to git snapshot seabios: update submodule to git snapshot tests/acpi: enable tests/data/acpi/q35/DSDT.mmio64 updates tests/bios-tables-test: tcg-emulate opteron for mmio64 test Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> |
||
|
Gerd Hoffmann
|
e83f3600f9 |
tests/acpi: disable tests/data/acpi/q35/DSDT.mmio64 updates
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Gerd Hoffmann
|
9a5ac9c261 |
tests/acpi: enable tests/data/acpi/q35/DSDT.mmio64 updates
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |