Since it can`t fail. Also modify the callers.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
This adds the SAS1068 device, a SAS disk controller used in VMware that
is oldish but widely supported and has decent performance. Unlike
megasas, it presents itself as a SAS controller and not as a RAID
controller. The device corresponds to the mptsas kernel driver in
Linux.
A few small things in the device setup are based on Don Slutz's old
patch, but the device emulation was written from scratch based on Don's
SeaBIOS patch and on the FreeBSD and Linux drivers. It is 2400 lines
shorter than Don's patch (and roughly the same size as MegaSAS---also
because it doesn't support the similar SPI controller), implements SCSI
task management functions (with asynchronous cancellation), supports
big-endian hosts, has complete support for migration and follows the
QEMU coding standards much more closely.
To write the driver, I first split Don's patch in two parts, with
the configuration bits in one file and the rest in a separate file.
I first left mptconfig.c in place and rewrote the rest, then deleted
mptconfig.c as well. The configuration pages are still based mostly on
VirtualBox's, though not exactly the same. However, the implementation
is completely different. The contents of the pages themselves should
not be copyrightable.
Signed-off-by: Don Slutz <Don@CloudSwitch.com>
Message-Id: <1347382813-5662-1-git-send-email-Don@CloudSwitch.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pxb-pcie is the counterpart of pxb for PCI express machines.
The new device re-uses the pxb code, but appears to the guests
as a different device. The pxb-pcie device does not have an internal
pci-pci bridge and exposes a PCIe root bus instead of a PCI one.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable PCIe device multi-function hot-add, just ensure function 0 is added
last, then driver will get the notification to scan the slot.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ivshmem is going to use MSIX state conditionally.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
For GICv3 ITS implementation we are going to use requester IDs in KVM IRQ
routing code. This patch introduces reusable convenient way to obtain this
ID from the device pointer. The new function is now used in some places,
where the same calculation was used.
MemTxAttrs.stream_id also renamed to requester_id in order to better
reflect semantics of the field.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <5814bcb03a297f198e796b13ed9c35059c52f89b.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will try to reuse assign_dev_load_option_rom in xen side, and
especially its a good beginning to unify pci assign codes both on
kvm and xen in the future.
[Fix build for Windows]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Most notably, this includes the TCO support for ICH: the last feature for 2.4
as we are entering the hard freeze.
Bugfixes only from now on.
virtio pci also gained cfg access capability - arguably a bugfix
since virtio spec makes it mandatory, but it's a big patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVnO/3AAoJECgfDbjSjVRp6lAH/2RAlzoopHDNMCj5r3wHygnA
WD1rjugftcQNJ5HkL1Oe9heQnjUcx4jdaskrTyP8vElY1zheGPYYqtPYjMB3Kfsu
fIQUhjhU6lKjF+0Q9QeyOyz9uvHWgTwtiQsHdFj+fsw7qMpiiADgGmlXoin01ZF9
yGaGZ5GcLNEHXGWyzEpKOml1UxtMFZRe649KV1tqLBoOSLdw+c3SzrGvKYjUtGnG
luMHPAJcKS7khSTyCVJN8un6SjbC/aB22mlh7TgxeNBANsGJVCH09lLCmczkIKAJ
73sut/+2f2aS9qGaSJiI5ElENDhSlWlSjNG/x4dp07fvurxpojde+bYS9veSo3c=
=cQ0D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio,pci: fixes and updates
Most notably, this includes the TCO support for ICH: the last feature for 2.4
as we are entering the hard freeze.
Bugfixes only from now on.
virtio pci also gained cfg access capability - arguably a bugfix
since virtio spec makes it mandatory, but it's a big patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Jul 8 10:40:07 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
tco-test: fix up config accesses and re-enable
virtio fix cfg endian-ness for BE targets
virtio-pci: implement cfg capability
virtio: define virtio_pci_cfg_cap in header.
pcie: Set the "link active" in the link status register
pci_regs.h: import from linux
virtio_net: reuse constants from linux
hw/i386/pc: don't carry FDC from pc_basic_device_init() to pc_cmos_init()
hw/i386/pc: reflect any FDC @ ioport 0x3f0 in the CMOS
hw/i386/pc: factor out pc_cmos_init_floppy()
ich9: implement strap SPKR pin logic
tests: add testcase for TCO watchdog emulation
ich9: add TCO interface emulation
acpi: split out ICH ACPI support
Revert "dataplane: allow virtio-1 devices"
dataplane: fix cross-endian issues
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems to make sense to import pci_regs.h from linux:
why maintain our own?
As a first step, move the header to standard-headers,
and add it to the update script.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix pba_offset initialization value for Chelsio T5 Virtual Function
device. The T5 hardware has a bug in it where it reports a Pending Interrupt
Bit Array Offset of 0x8000 for its SR-IOV Virtual Functions instead
of the 0x1000 that the hardware actually uses internally. As the hardware
doesn't return the correct pba_offset value, add a quirk to instead
return a hardcoded value of 0x1000 when a Chelsio T5 VF device is
detected.
This bug has been fixed in the Chelsio's next chip series T6 but there are
no plans to respin the T5 ASIC for this bug. It is just documented in the
T5 Errata and left it at that.
Signed-off-by: Gabriel Laupre <glaupre@chelsio.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In the PCI expander bridge, we will want to disable those features of
pci-bridge that relate to SHPC (standard hotplug controller):
- SHPC bar and underlying MemoryRegion
- interrupt (INTx or MSI)
- effective hotplug callbacks
- other SHPC hooks (initialization, cleanup, migration etc)
Introduce a new feature request bit in the PCIBridgeDev.flags field, and
turn off the above if the bit is explicitly cleared.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It follows msi_present() in "include/hw/pci/msi.h".
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This should help catch property name typos at compile time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This should help catch property name typos at compile time.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Change the signature of the function-like macro SHPC_VMSTATE(), so that we
can produce and expect this field conditionally in the migration stream,
starting with an upcoming patch.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Simplifies multiseat configuration, see
docs/multiseat.txt update for details.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVeXakAAoJECgfDbjSjVRpyFAH/AwSJhBbQOxtqS66INnzoLRJ
MWD3cP8tj0PzXsLx0cuPxdTboHH60alhSp+iLGv4NgNw15okY71bY2eLhewxS66W
a0wzVCaqeeD5GAoQaSOlqNLrhBodsKS62BWD9y0kK9rtMJfCW2C1JP8Mpue1XMuE
UC72tF4Q6wVdBD/kTD9DZW/23roFu0SuieFSjbQNNi1lInXtDv79UGX0xUHaXlal
+qCtRIy/wNZF0z5arNV/Skq7LKqYl7KZtTapZByy+q6vu0L8mOeXgJ9DLh666htB
NQJJ+VhsgBKPHmZqf8h4mPlvyp03rkr5dIGk7iB2o44GPaEJ/RjZ4wULjxWD12s=
=UY/0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (42 commits)
i386/acpi-build: fix PXB workarounds for unsupported BIOSes
i386/acpi-build: more traditional _UID and _HID for PXB root buses
vhost-scsi: move qdev properties into vhost-scsi.c
virtio-9p-device: move qdev properties into virtio-9p-device.c
virtio-serial-bus: move qdev properties into virtio-serial-bus.c
virtio-rng: move qdev properties into virtio-rng.c
virtio-scsi: move qdev properties into virtio-scsi.c
virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES
virtio-net: move qdev properties into virtio-net.c
virtio-input: emulated devices [pci]
virtio-input: core code & base class [pci]
pci: add PCI_CLASS_INPUT_*
virtio-pci: fill VirtIOPCIRegions early.
virtio-pci: drop identical virtio_pci_cap
virtio-pci: move cap type to VirtIOPCIRegion
virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map
virtio-pci: add virtio_pci_modern_region_map()
virtio-pci: add virtio_pci_modern_regions_init()
virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions
virtio-balloon: switch to virtio_add_feature
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVcC2WAAoJECgfDbjSjVRpwgcH/3mvFP3UmvmXyzf8mYtQ/1fR
ikvdTGHl2DR7TMQszNeCJn/p6NgH3oXRbXh39xM1xl9D2/dsZH9o1cUyFE04K9LK
am0cTmlty1OEyFN8BX1TtpngUxa5mpRA/+NYuWbh1FoTp6RoEPM6P+L1zLqtXYn1
REF++ehrsQI2Az2pibf4nul8bwuTWJLJeMS6TcCVCRGoaHsCESiVMu2sQrzEbWEW
E8ZWaXaiycLxLkW0/oU8BmZyrAk1PHdHwgbMUINV0kV5E2u+ZU+3KY79ezC2FyHW
NV7G9Rhh/5H828/cB6UP4CPZ4AYIYmg02iz5XBGKbd8WS9oPrJVK7EoqfU3oZfc=
=5AmP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, acpi, virtio, tpm
This includes pxb support by Marcel, as well as multiple enhancements all over
the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 4 11:51:02 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
vhost: logs sharing
hw/acpi: piix4_pm_init(): take fw_cfg object no more
hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core
hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"
pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size
docs: Add PXB documentation
apci: fix PXB behaviour if used with unsupported BIOS
hw/pxb: add numa_node parameter
hw/pci: add support for NUMA nodes
hw/pxb: add map_irq func
hw/pci: inform bios if the system has extra pci root buses
hw/pci: introduce PCI Expander Bridge (PXB)
hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query
hw/acpi: remove from root bus 0 the crs resources used by other buses.
hw/acpi: add _CRS method for extra root busses
hw/apci: add _PRT method for extra PCI root busses
hw/acpi: add support for i440fx 'snooping' root busses
hw/pci: extend PCI config access to support devices behind PXB
hw/i386: query only for q35/pc when looking for pci host bridge
hw/pci: made pci_bus_num a PCIBusClass method
...
Conflicts:
hw/i386/pc_piix.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need to work with PCI BARs to generate OF properties
during PCI hotplug for sPAPR guests.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
PCI root buses can be attached to a specific NUMA node.
PCI buses are not attached by default to a NUMA node.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
PXB is a "light-weight" host bridge whose purpose is to enable
the main host bridge to support multiple PCI root buses
for pc machines.
As oposed to PCI-2-PCI bridge's secondary bus, PXB's bus
is a primary bus and can be associated with a NUMA node
(different from the main host bridge) allowing the guest OS
to recognize the proximity of a pass-through device to
other resources as RAM and CPUs.
The PXB is composed from:
- A primary PCI bus (can be associated with a NUMA node)
Acts like a normal pci bus and from the functionality point
of view is an "expansion" of the bus behind the
main host bridge.
- A pci-2-pci bridge behind the primary PCI bus where the actual
devices will be attached.
- A host-bridge PCI device
Situated on the bus behind the main host bridge, allows
the BIOS to configure the bus number and IO/mem resources.
It does not have its own config/data register for configuration
cycles, this being handled by the main host bridge.
- A host-bridge sysbus to comply with QEMU current design.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Refactoring it as a method of PCIBusClass will allow
different implementations for subclasses.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Refactoring it as a method of PCIBusClass will allow
different implementations for subclasses.
Removed the assumption that the root bus does not
have a parent device because is specific only
to the default class implementation.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
It's being used by the hypervisor. For now simply mimic a device not
capable of masking, and fully emulate any accesses a guest may issue
nevertheless as simple reads/writes without side effects.
This is XSA-129.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus.
This patch implements passing these IDs in qemu.
SMMU is also known to use stream IDs, therefore this addition can also be useful for
implementing platforms with SMMU.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Changes from v1:
- Added bus number to the stream ID
- Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into
msi_send_message() function.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rocker is an ethernet switch device, so add 'other' network device class as
defined by PCI to cover these types of devices.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1426306173-24884-6-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
from pcie spec 7.8.17, the End-End TLP Prefix Blocking bit local
is 15(e.g. 0x8000) in device control 2 register.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
None of them should be used in new code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Call the new PCIDeviceClass method realize(). Default it to
pci_default_realize(), which calls old method init().
To convert a device model, make it implement realize() rather than
init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJU4hugAAoJEL/70l94x66DZXEH/i72tOgvKZfAjfq2xmHXNEsr
roCfTFIIjKK7feyW6YgwT5pgex6I5umFsO+uIyI/wbu8nDl/3NYEQBT4fR2cGfli
GKeJOEu8kf+Zt8U+fbxyVQclbuU5S0Ujsg1fX4QXC4swB5fGLT2cRWJ5qd6hKBQs
GflBuLa7h4eOzcTtOPpqRIwZ8mQE0uxv/hKq9kYLKHXJN2aWsiOls8KQ2CXj2yAl
p6bMS5f0H0S/1hvQcQV9EazX7owlPIEet3AmSL1TC2sjJ8hrNGMBoFPtUys1uqjc
B3CwuGi0JtWIduFYV9vZ/Ze4G7Y2iZlqc5vDxIl94d+iFmoHymDOi3mFUZ3H8XQ=
=Lk9p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
- vhost-scsi: add bootindex property
- RCU: fix MemoryRegion lifetime issues in PCI; document the rules;
convert of AddressSpaceDispatch and RAMList
- KVM: add kvm_exit reasons for aarch64
# gpg: Signature made Mon Feb 16 16:32:32 2015 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (21 commits)
Convert ram_list to RCU
exec: convert ram_list to QLIST
cosmetic changes preparing for the following patches
exec: protect mru_block with RCU
rcu: add g_free_rcu
rcu: introduce RCU-enabled QLIST
exec: RCUify AddressSpaceDispatch
exec: make iotlb RCU-friendly
exec: introduce cpu_reload_memory_map
docs: clarify memory region lifecycle
pci: split shpc_cleanup and shpc_free
pcie: remove mmconfig memory leak and wrap mmconfig update with transaction
memory: keep the owner of the AddressSpace alive until do_address_space_destroy
rcu: run RCU callbacks under the BQL
rcu: do not let RCU callbacks pile up indefinitely
vhost-scsi: set the bootable value of channel/target/lun
vhost-scsi: add a property for booting
vhost-scsi: expose the TYPE_FW_PATH_PROVIDER interface
vhost-scsi: add bootindex property
qdev: support to get a device firmware path directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
object_unparent should not be called until the parent device is going to be
destroyed. Only remove the capability and do memory_region_del_subregion
at unrealize time. Freeing the data structures is left in shpc_free, to
be called from the instance_finalize callback.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are going to introduce a PCIe host controller that doesn't exist that
way in real hardware, but still needs to expose some PCIe root device which
has PCI IDs.
Allocate a PCI ID in the Red Hat space that we use for other devices of this
kind.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mmcfg space is a memory region that allows access to PCI config space
in the PCIe world. To maintain abstraction layers, I would like to expose
the mmcfg space as a sysbus mmio region rather than have it mapped straight
into the system's memory address space though.
So this patch splits the initialization of the mmcfg space from the actual
mapping, allowing us to only have an mmfg memory region without the map.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
The rocker device uses same PCI device ID as sdhci. Since rocker device driver
has already been accepted into Linux 3.18, and REDHAT_SDHCI device ID isn't
used by any drivers, it's safe to move REDHAT_SDHCI device ID, avoiding
conflict with rocker.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 2108 chip supports MSI and MSI-X, so update the emulation
to support both chips.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[Make VMStateDescription const. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'HotplugHandler.unplug' callback is currently used as async
call to issue unplug request for device that implements it.
Renaming 'unplug' callback to 'unplug_request' should help to
avoid confusion about what callback does and would allow to
introduce 'unplug' callback that would perform actual device
removal when guest is ready for it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rename helper functions to make a clearer distinction between
the PCIe capability/control register feature ARI forwarding and a
device that supports the ARI feature via an ARI extended PCIe capability.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is needed by hot-unplug in order to get an indication
from the OS when the device can be physically detached.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This assures the trivial field initialization is applied for any derived
type - currently only Q35PCIHost.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... and rebase pci_add_capability() to it.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
make qdev_unplug()/device_set_realized() to call hotplug handler's
plug/unplug methods if available and remove not needed anymore
hot(un)plug handling from PCIDevice.
In case if hotplug handler is not available, revert to the legacy
hotplug method for compatibility with not yet converted buses.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PCIE_SLOT device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS
"hotplug-handler" property to PCI_BRIDGE_DEV device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split shpc_device_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PCI_BRIDGE_DEV device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS
"hotplug-handler" property to PCI_BRIDGE_DEV device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use
generic DeviceClass.hotpluggable field instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qbus_reset_all can be used instead. There is no semantic change
because pcibus_reset returns 1 and takes care of the device
tree traversal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The intention of the Xen PV device is that it is used as a parent
device for PV drivers in Xen HVM guests and the set of PV drivers that
bind to the device is determined by its device ID (and possibly
vendor ID and revision). As such, the device should not have a default
device ID, it should always be supplied by the Xen toolstack.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This reverts commit a53ae8e934.
The patch being reverted introduced a low-priority memory region
covering all 64 bit pci address space. This exposed the following bugs
elsewhere in the code:
1. Some memory regions have INT64_MAX size, where the
intent was all 64 bit address space.
This results in a sub-page region, should be UINT64_MAX.
2. page table rendering in exec.c ignores physical address bits
above TARGET_PHYS_ADDR_SPACE_BITS.
Access outside this range (e.g. from device DMA, or gdb stub)
ends up with a wrong region. Registering a region outside this
range leads to page table corruption.
3. Some regions overlap PCI hole and have same priority.
This only works as long as no device uses the overlapping address.
It doesn't look like we can resolve all issues in time for 1.7.
Let's fix the bugs first and apply afterwards for 1.8.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace the legacy le32_to_cpupu() with ldl_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy le16_to_cpupu() with lduw_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_le32wu() with stl_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_le16wu() with stw_le_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Address is already exposed, expose size for symmetry.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Useful to make it accessible through QOM.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Callers pass in the address so it's helpful for
them to be able to decode it.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it possible to test unmapped status through QMP.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of exposing the the irq field,
pci wrappers to qemu_set_irq or qemu_irq_*
can be used.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The fields hpev_intx and aer_intx were removed because
both AER and hot-plug events must use device's interrupt.
Assert/deassert interrupts using pci irq wrappers instead.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Interrupt pin is selected and saved into PCI_INTERRUPT_PIN
register during device initialization. Devices should not call
directly qemu_set_irq and specify the INTx pin on each call.
Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise,
qemu_irq_lower and qemu_irq_pulse, setting the irq
based on PCI_INTERRUPT_PIN.
Added pci_allocate_irq wrapper to be used by devices that
still need PCIDevice infrastructure to assert irqs.
Renamed a static method which was named already pci_set_irq.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A MemoryRegion with negative priority was created and
it spans over all the pci address space.
It "intercepts" the accesses to unassigned pci
address space and will follow the pci spec:
1. returns -1 on read
2. does nothing on write
Note: setting the RECEIVED MASTER ABORT bit in the STATUS register
of the device that initiated the transaction will be
implemented in another series
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSR83kAAoJECgfDbjSjVRpX08H/jKgYBNJaChev1TROIVHEGbu
IzvkjfocvKO+6wmhOf5x+xwFmzrijUMa1CPvOkCp8c2A3Iek7rmnedknlhXYh7dM
z5mXcvFGjnu7ST38ydF/Emk9+Z6rRg5Y/hkmlDyr+9lNcoiCDLXXcUrKjeIHNoWl
e8w3yiPCJ528QyrLwQ890XetJphv67pMlsjMgLQ2betMk++Ac/ctUf1D2p1X4NeQ
Q2drbo5Z4yDk0i6QMA3iLq1Bh/AhE10bCDq9rCzfZGIKVyncL6ne2pSi/xDvpLrF
dmxoiJ5QrK6xLnagCcn5T6SB9DkwbEPdL7qCqlxZ8USr7cVyPdzYtHtGSBWdeXY=
=xF01
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
smbios: Factor out smbios_maybe_add_str()
smbios: Make multiple -smbios type= accumulate sanely
smbios: Improve diagnostics for conflicting entries
smbios: Convert to QemuOpts
smbios: Normalize smbios_entry_add()'s error handling to exit(1)
virtio-net: fix up HMP NIC info string on reset
pci: remove explicit check to 64K ioport size
piix4: disable io on reset
piix: use 64 bit window programmed by guest
q35: use 64 bit window programmed by guest
pci: add helper to retrieve the 64-bit range
range: add min/max operations on ranges
range: add Range to typedefs
q35: make pci window address/size match guest cfg
Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
Currently, treat it exactly as a 53C895A.
53C895A is a 53C810 with more capabilities, so this should work.
However, this lets us test different code paths on Linux, which
don't use lastest features if it detect a 810, or on some OSes
which only support 810 and not 895A (like very old Windows NT
versions).
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
=SytJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
A PCI device's DMA address space (possibly an IOMMU) is returned by a
method on the PCIBus. At the moment that only has one caller, so the
method is simply open coded. We'll need another caller for VFIO, so
this patch introduces a helper/wrapper function.
If IOMMU is not set, the pci_device_iommu_address_space() function
returns the parent's IOMMU skipping the "bus master" address space as
otherwise proper emulation would require more effort for no benefit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[aik: added inheritance from parent if iommu is not set for the current bus]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move PCIEPort's "port" property to the new type, same for "aer_log_max".
Move PCIESlot's "chassis" and "slot" properties to the new type.
Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce TYPE_PCI_BRIDGE as base type and use PCI_BRIDGE() casts.
Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[AF: Updated pbm-bridge parent to TYPE_PCI_BRIDGE]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR5meNAAoJECgfDbjSjVRp24IIAMOkxbb85FJ323G/x5cQBzA/
gjFDmvB6geIMBorX1YZRnIM+RFhx+mkXtBTu2raWVTNTt5G2u3vAQQWW2zSiOTBL
gH4BhzJnUoqLHOydWql2MsGS7DMQo4Fq8OnzRBkZ119AEEqNMad1w2LykwFWs4ra
k3bsPNCZM+ZNiLMWtQLOcD3FYvoiISinqFd81KOnxvDiT90rczk4dLWqjv8smNif
WqZ7aCD1hGJ5yD7JI2YjCbhVvu4F7tBK+fWkT/O3oYslh/o241lyxUriOXMKdKML
04sNXa5eWue9cOKlbo1G+yfFwFg1JDsAMe/Usg0KXz1MMK91wiWE763ESPbFBK0=
=P+pr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pc: don't access fw cfg if NULL
virtio-net: add feature bit for any header s/g
net: add support of mac-programming over macvtap in QEMU side
pci: fix BRDIGE typo
pci-bridge: update mappings for migration/restore
Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix for LP#1187529: Devices on PCI bridge stop working when
live-migrated. Update bridge mappings for all PCI bridge
devices in get_pci_config_device().
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR2ctmAAoJECgfDbjSjVRpQpAH/Rk00yLrQ2R5ScNa8AL9LeaJ
gVFndBmmuRz4gdhyATx6lzR98ic32iTr0+YR5mL51btgmM5a0bEd/SIu34nXriWj
PsM0wdXfo/oEygdttxhvzJOH17tohRV9xg2WA2d8BEwDzrDyqoQ4J0VJlHlG7u3W
nq4KVDVUpLNQFKG8ZgJ2vW0WMw/mBSj2rluhQUALhcuvChphtvAFZ2rsSfJr6bzD
aBELrtIvfLvPGN/0WVeYs9qlp4EE03H3X6gN61QvV3/YElxubKUV5XyMDOX2dW3D
2j0NQi84LYHn0SFap2r/Kgm47/F6Q56SFk5lrgZrg60mhQTwocw7PfL8CGxjXRI=
=gxxc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,misc enhancements
This includes some pci enhancements:
Better support for systems with multiple PCI root buses
FW cfg interface for more robust pci programming in BIOS
Minor fixes/cleanups for fw cfg and cross-version migration -
because of dependencies with other patches
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 07 Jul 2013 03:11:18 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By David Gibson (10) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: Fold host_buses list into PCIHostState functionality
pci: Remove domain from PCIHostBus
pci: Simpler implementation of primary PCI bus
pci: Add root bus parameter to pci_nic_init()
pci: Add root bus argument to pci_get_bus_devfn()
pci: Replace pci_find_domain() with more general pci_root_bus_path()
pci: Use helper to find device's root bus in pci_find_domain()
pci: Abolish pci_find_root_bus()
pci: Move pci_read_devaddr to pci-hotplug-old.c
pci: Cleanup configuration for pci-hotplug.c
pvpanic: fix fwcfg for big endian hosts
pvpanic: initialization cleanup
MAINTAINERS: s/Marcelo/Paolo/
e1000: cleanup process_tx_desc
pc_piix: cleanup init compat handling
pc: pass PCI hole ranges to Guests
pci: store PCI hole ranges in guestinfo structure
range: add Range structure
Message-id: 1373228271-31223-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The host_buses list is an odd structure - a list of pointers to PCI root
buses existing in parallel to the normal qdev tree structure. This patch
removes it, instead putting the link pointers into the PCIHostState
structure, which have a 1:1 relationship to PCIHostBus structures anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At present, pci_nic_init() and pci_nic_init_nofail() assume that they will
only create a NIC under the primary PCI root. As we add support for
multiple PCI roots, that may no longer be the case. This patch adds a root
bus parameter to pci_nic_init() (and updates callers accordingly) to allow
the machine init code using it to specify the right PCI root for NICs
created by old-style -net nic parameters. NICs created new-style, with
-device can of course be put anywhere.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_get_bus_devfn() interprets a full PCI address string to give a PCIBus *
and device/function number within that bus. Currently it assumes it is
working on an address under the primary PCI root bus. This patch extends
it to allow the caller to specify a root bus. This might seem a little odd
since the supplied address can (theoretically) include a PCI domain number.
However, attempting to use a non-zero domain number there is currently an
error, so that shouldn't really cause problems.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_find_domain() is used in a number of places where we want an id for a
whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is
that many platforms may support multiple independent host bridges with no
hardware supplied notion of domain number.
This patch, therefore, replaces calls to pci_find_domain() with calls to
a new pci_root_bus_path() returning a string. The new call is implemented
in terms of a new callback in the host bridge class, so it can be defined
in some way that's well defined for the platform. When no callback is
available we fall back on the qbus name.
Most current uses of pci_find_domain() are for error or informational
messages, so the change in identifiers should be harmless. The exception
is pci_get_dev_path(), whose results form part of migration streams. To
maintain compatibility with old migration streams, the PIIX PCI host is
altered to always supply "0000" for this path, which matches the old domain
number (since the code didn't actually support domains other than 0).
For the pseries (spapr) PCI bridge we use a different platform-unique
identifier (pseries machines can routinely have dozens of PCI host
bridges). Theoretically that breaks migration streams, but given that we
don't yet have migration support for pseries, it doesn't matter.
Any other machines that have working migration support including PCI
devices will need to be updated to maintain migration stream compatibility.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently pci_find_domain() performs two functions - it locates the PCI
root bus above the given bus, then looks up that root bus's domain number.
This patch adds a helper function to perform the first task, finding the
root bus for a given PCI device. This is then used in pci_find_domain().
This changes pci_find_domain()'s signature slightly, taking a PCIDevice
instead of a PCIBus - since all callers passed something of the form
dev->bus, this simplifies things slightly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_find_root_bus() takes a domain parameter. Currently PCI root buses
with domain other than 0 can't be created, so this is more or less a long
winded way of retrieving the main PCI root bus. Numbered domains don't
actually properly cover the (non x86) possibilities for multiple PCI root
buses, so this patch for now enforces the domain == 0 restriction in other
places to replace pci_find_root_bus() with an explicit
pci_find_primary_bus().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_read_devaddr() is only used by the legacy functions for the old PCI
hotplug interface in pci-hotplug-old.c. So we move the function there,
and make it static.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the new iommu support in the memory core for iommu support. The only
user, spapr, is also converted, but it still provides a DMAContext
interface until the non-PCI bits switch to AddressSpace.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
[ Do not calls memory_region_del_subregion() on the device's
bus_master_enable_region, it is an alias; return an AddressSpace
from the IOMMU hook and remove the destructor hook. - David Gibson ]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using a trick cut+pasted from vmstate_scsi_device
to wind up msix_save and msix_load.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
# By Paolo Bonzini (5) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
virtio: simplify Makefile conditionals
virtio-scsi: create VirtIOSCSICommon
vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping
scsi: VMWare PVSCSI paravirtual device implementation
scsi: avoid assertion failure on VERIFY command
Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This device is used for kvm unit tests,
currently it supports testing performance of ioeventfd.
Using updated kvm unittest, here's an example output:
mmio-no-eventfd:pci-mem 8796
mmio-wildcard-eventfd:pci-mem 3609
mmio-datamatch-eventfd:pci-mem 3685
portio-no-eventfd:pci-io 5287
portio-wildcard-eventfd:pci-io 1762
portio-datamatch-eventfd:pci-io 1777
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
