The CSS subsystem uses global variables, just face the truth and use
a variable also for whether the CSS vmstate is in use; remove the
indirection of fetching it from the machine type, which makes the
TCG code depend unnecessarily on the virtio-ccw machine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240509170044.190795-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of mucking with css_migration_enabled(), add a property specific to
the FLIC device, similar to what is done for TYPE_S390_STATTRIB.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sclp_get_event_facility_bus() scans the whole machine to find a
TYPE_SCLP_EVENTS_BUS object. The SCLPDevice instance is now available
under the machine state, use it to simplify the lookup and adjust the
creation of the consoles.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240502131533.377719-3-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Initialize directly SCLPDevice from the machine init handler and
remove s390_sclp_init(). We will use the SCLPDevice pointer later to
create the consoles.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20240502131533.377719-2-clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let hw/hyperv/hyperv.c and hw/intc/s390_flic.c handle (respectively)
SynIC and adapter routes, removing the code from target-independent
files. This also removes the only occurrence of AdapterInfo outside
s390 code, so remove that from typedefs.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will prepare ground for future changes adding an Error** argument
to the save_setup() handler. We need to make sure that on failure,
set_migrationmode() always sets a new error. See the Rules section in
qapi/error.h.
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20240320064911.545001-2-clg@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
ISM devices are sensitive to manipulation of the IOMMU, so the ISM device
needs to be reset before the vfio-pci device is reset (triggering a full
UNMAP). In order to ensure this occurs, trigger ISM device resets from
subsystem_reset before triggering the PCI bus reset (which will also
trigger vfio-pci reset). This only needs to be done for ISM devices
which were enabled for use by the guest.
Further, ensure that AIF is disabled as part of the reset event.
Fixes: ef1535901a ("s390x: do a subsystem reset before the unprotect on reboot")
Fixes: 03451953c7 ("s390x/pci: reset ISM passthrough devices on shutdown and system reset")
Reported-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use a flag to keep track of whether AIF is currently enabled. This can be
used to avoid enabling/disabling AIF multiple times as well as to determine
whether or not it should be disabled during reset processing.
Fixes: d0bc7091c2 ("s390x/pci: enable adapter event notification for interpreted devices")
Reported-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-ID: <20240118185151.265329-2-mjrosato@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Fix condition code problem in the CLC and LAALG instruction
* Fix ordering of the new s390x topology list entries
* Add some more files to the MAINTAINERS file
* Allow newer versions of Tesseract in the m68k nextcube test
-----BEGIN PGP SIGNATURE-----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=y+cC
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-11-07' of https://gitlab.com/thuth/qemu into staging
* Fix s390x CPU reconfiguration information in the SCLP facility map
* Fix condition code problem in the CLC and LAALG instruction
* Fix ordering of the new s390x topology list entries
* Add some more files to the MAINTAINERS file
* Allow newer versions of Tesseract in the m68k nextcube test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmVKgksRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWIHg//TM3JOpsMEqHKlUKqOJH02mFQrK6H7LG0
# BC56FG7T+/mpYs1NTG92t8nCK03C2ZCweQWD7ZulRJAjPhZv+TF5bJEForivU7+k
# PKEshz9xKCWn2YGyNnf2LA06J1JkF215+KlReOoxwSgj1cPlHfBLQ0DtxmpJJZ1G
# h5p4d26BbSlwR58HrFWTlhgJMPenl59BETUGIK1FklBxunmZeeijddfniAhOT44y
# i0u9/H9KCg3tkwBROUy+42QV+ef32kz/yvi5RmYQI5W7PixO4sxH6MYduOjshsu9
# wK70f8EOwiZV6lFxqmbV7vxFeNnp5IuaVU7PMBoAkwZqLw99mSFy1+1BabCuL5b+
# 3iUTiD4UW48MYwE2Ua6Lit4kpfjhwcp/UYz6pIk6TCBQX6LfzO+nj+rod0GdIpyZ
# 4Lwm7jBtpTlYkGrsMvpA/qcidOtqPA1lmBTNlY1hFodQF6KWtyObn0w5AM80xeeU
# /mGxQDz97Bpz7LKZvhu+k38jaWvnJFnl3jF1zet88CYL9YL+YI/k1KjhFafCXb0V
# 38Xpt5JTWxyLSh2B3gx0OpokX5bftvW9GlLix0HqL7c23uYwR2Bq+Rd6I8SAlk4C
# uJq6gqP8IFBFHfgbmyqf/fyd/eHxm7J1voIdy9PZyxZ1JYT9A7yu56qV6SJYwCpr
# aARwui/Dm4o=
# =y+cC
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Nov 2023 02:30:35 HKT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-11-07' of https://gitlab.com/thuth/qemu:
target/s390x/cpu topology: Fix ordering and creation of TLEs
tests/tcg/s390x: Test ADD LOGICAL WITH CARRY
tests/tcg/s390x: Test LAALG with negative cc_src
target/s390x: Fix LAALG not updating cc_src
tests/tcg/s390x: Test CLC with inaccessible second operand
target/s390x: Fix CLC corrupting cc_src
target/s390x/cpu_models: Use 'first_cpu' in s390_get_feat_block()
s390/sclp: fix SCLP facility map
tests/avocado: Allow newer versions of tesseract in the nextcube test
MAINTAINERS: Add artist.c to the hppa machine section
MAINTAINERS: Add the virtio-gpu documentation to the corresponding section
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Qemu's SCLP implementation incorrectly reports that it supports CPU
reconfiguration. If a guest issues a CPU reconfiguration request it
is rejected as invalid command.
Fix the SCLP_HAS_CPU_INFO mask, and remove the unused
SCLP_CMDW_CONFIGURE_CPU and SCLP_CMDW_DECONFIGURE_CPU defines.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Message-ID: <20231024100703.929679-1-hca@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"hw/s390x/sclp.h" is a header used by target-agnostic objects
(such hw/char/sclpconsole[-lm].c), thus can not use target-specific
types, such CPUS390XState.
Have sclp_service_call[_protected]() take a S390CPU pointer, which
is target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231106114500.5269-3-philmd@linaro.org>
"hw/s390x/css.h" is a header used by target-agnostic objects
(such hw/s390x/virtio-ccw-gpu.c), thus can not use target-specific
types, such CPUS390XState.
Have css_do_sic() take S390CPU a pointer, which is target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231106114500.5269-2-philmd@linaro.org>
When the host supports the CPU topology facility, the PTF
instruction with function code 2 is interpreted by the SIE,
provided that the userland hypervisor activates the interpretation
by using the KVM_CAP_S390_CPU_TOPOLOGY KVM extension.
The PTF instructions with function code 0 and 1 are intercepted
and must be emulated by the userland hypervisor.
During RESET all CPU of the configuration are placed in
horizontal polarity.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-8-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
During a subsystem reset the Topology-Change-Report is cleared
by the machine.
Let's ask KVM to clear the Modified Topology Change Report (MTCR)
bit of the SCA in the case of a subsystem reset.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-7-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The maximum nested topology entries is used by the guest to
know how many nested topology are available on the machine.
Let change the MNEST value from 2 to 4 in the SCLP READ INFO
structure now that we support books and drawers.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20231016183925.2384704-6-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On interception of STSI(15.1.x) the System Information Block
(SYSIB) is built from the list of pre-ordered topology entries.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-5-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The topology information are attributes of the CPU and are
specified during the CPU device creation.
On hot plug we:
- calculate the default values for the topology for drawers,
books and sockets in the case they are not specified.
- verify the CPU attributes
- check that we have still room on the desired socket
The possibility to insert a CPU in a mask is dependent on the
number of cores allowed in a socket, a book or a drawer, the
checking is done during the hot plug of the CPU to have an
immediate answer.
If the complete topology is not specified, the core is added
in the physical topology based on its core ID and it gets
defaults values for the modifier attributes.
This way, starting QEMU without specifying the topology can
still get some advantage of the CPU topology.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Co-developed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231016183925.2384704-4-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
No functional changes.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Protected Virtualization (PV) is not a real hardware device:
it is a feature of the firmware on s390x that is exposed to
userspace via the KVM interface.
Move the pv.c/pv.h files to target/s390x/kvm/ to make this clearer.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624200644.23931-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Kernel commit 292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown
for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail
if the VM is not larger than 2GiB. QEMU would attempt it and fail,
print an error message, and then proceed with a normal teardown.
Avoid attempting to use asynchronous teardown altogether when the VM is
not larger than 2 GiB. This will avoid triggering the error message and
also avoid pointless overhead; normal teardown is fast enough for small
VMs.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot")
Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230510105531.30623-2-imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix inline function parameter in pv.h]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds support for the asynchronous teardown for reboot for
protected VMs.
When attempting to tear down a protected VM, try to use the new
asynchronous interface first. If that fails, fall back to the classic
synchronous one.
The asynchronous interface involves invoking the new
KVM_PV_ASYNC_DISABLE_PREPARE command for the KVM_S390_PV_COMMAND ioctl.
This will prepare the current protected VM for asynchronous teardown.
Once the protected VM is prepared for teardown, execution can continue
immediately.
Once the protected VM has been prepared, a new thread is started to
actually perform the teardown. The new thread uses the new
KVM_PV_ASYNC_DISABLE command for the KVM_S390_PV_COMMAND ioctl. The
previously prepared protected VM is torn down in the new thread.
Once KVM_PV_ASYNC_DISABLE is invoked, it is possible to use
KVM_PV_ASYNC_DISABLE_PREPARE again. If a protected VM has already been
prepared and its cleanup has not started, it will not be possible to
prepare a new VM. In that case the classic synchronous teardown has to
be performed.
The synchronous teardown will now also clean up any prepared VMs whose
asynchronous teardown has not been initiated yet.
This considerably speeds up the reboot of a protected VM; for large VMs
especially, it could take a long time to perform a reboot with the
traditional synchronous teardown, while with this patch it is almost
immediate.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230214163035.44104-3-imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ISM device firmware stores unique state information that can
can cause a wholesale unmap of the associated IOMMU (e.g. when
we get a termination signal for QEMU) to trigger firmware errors
because firmware believes we are attempting to invalidate entries
that are still in-use by the guest OS (when in fact that guest is
in the process of being terminated or rebooted).
To alleviate this, register both a shutdown notifier (for unexpected
termination cases e.g. virsh destroy) as well as a reset callback
(for cases like guest OS reboot). For each of these scenarios, trigger
PCI device reset; this is enough to indicate to firmware that the IOMMU
is no longer in-use by the guest OS, making it safe to invalidate any
associated IOMMU entries.
Fixes: 15d0e7942d ("s390x/pci: don't fence interpreted devices without MSI-X")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221209195700.263824-1-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
[thuth: Adjusted the hunk in s390-pci-vfio.c due to different context]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, s390x-pci performs accounting against the vfio DMA
limit and triggers the guest to clean up mappings when the limit
is reached. Let's go a step further and also limit the size of
the supported DMA aperture reported to the guest based upon the
initial vfio DMA limit reported for the container (if less than
than the size reported by the firmware/host zPCI layer). This
avoids processing sections of the guest DMA table during global
refresh that, for common use cases, will never be used anway, and
makes exhausting the vfio DMA limit due to mismatch between guest
aperture size and host limit far less likely and more indicitive
of an error.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 59d1ce4439.
The "zpcii-disable" machine property is redundant with the "interpret"
zPCI device property. Remove it for clarification.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-2-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The S390 CPU topology accepts the smp.threads argument while
in reality it does not effectively allow multthreading.
Let's keep this behavior for machines older than 7.2 and
refuse to use threads in newer machines until multithreading
is really exposed to the guest by the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20221103170150.20789-3-pmorel@linux.ibm.com>
[thuth: Small fixes to the commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's add a few bits of code which hide the new KVM PV dump API from
us via new functions.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
[ Marc-André: fix up for compilation issue ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-10-frankja@linux.ibm.com>
Introduce an interface over which we can get information about UV data.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-8-frankja@linux.ibm.com>
The zpcii-disable machine property can be used to force-disable the use
of zPCI interpretation facilities for a VM. By default, this setting
will be off for machine 7.2 and newer.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use the reserved pool of simulated PCI groups to allow intercept
devices to have separate groups from interpreted devices as some group
values may be different. If we run out of simulated PCI groups, subsequent
intercept devices just get the default group.
Furthermore, if we encounter any PCI groups from hostdevs that are marked
as simulated, let's just assign them to the default group to avoid
conflicts between host simulated groups and our own simulated groups.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-7-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the associated kvm ioctl operation to enable adapter event notification
and forwarding for devices when requested. This feature will be set up
with or without firmware assist based upon the 'forwarding_assist' setting.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-6-mjrosato@linux.ibm.com>
[thuth: Rename "forwarding_assist" property to "forwarding-assist"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle. For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.
By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel. When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to interface with the underlying host zPCI device, we need
to know its function handle. Add a routine to grab this from the
vfio CLP capabilities chain.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-3-mjrosato@linux.ibm.com>
[thuth: Replace free(info) with g_free(info)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Previously, we required bits 5, 6 and 7 to be zero (0x07 == 0b111). But,
as per the principles of operation, bit 5 is ignored in MSCH and bits 0,
1, 6 and 7 need to be zero.
As both PMCW_FLAGS_MASK_INVALID and ioinst_schib_valid() are only used
by ioinst_handle_msch(), adjust the mask accordingly.
Fixes: db1c8f53bf ("s390: Channel I/O basic definitions.")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20211216131657.1057978-1-nrb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The DTSM is a mask that specifies which I/O Address Translation designation
types are supported. Today QEMU only supports DT=1.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current default PCI group being used can technically collide with a
real group ID passed from a hostdev. Let's instead use a group ID that
comes from a special pool (0xF0-0xFF) that is architected to be reserved
for simulated devices.
Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-2-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The PAGE_SIZE macro is causing trouble on Alpine Linux since it
clashes with a macro from a system header there. We already have
the TARGET_PAGE_SIZE, TARGET_PAGE_MASK and TARGET_PAGE_BITS macros
in QEMU anyway, so let's simply replace the PAGE_SIZE, PAGE_MASK
and PAGE_SHIFT macro with their TARGET_* counterparts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/572
Message-Id: <20210901125800.611183-1-thuth@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's enable storage keys lazily under TCG, just as we do under KVM.
Only fairly old Linux versions actually make use of storage keys, so it
can be kind of wasteful to allocate quite some memory and track
changes and references if nobody cares.
We have to make sure to flush the TLB when enabling storage keys after
the VM was already running: otherwise it might happen that we don't
catch references or modifications afterwards.
Add proper documentation to all callbacks.
The kvm-unit-tests skey tests keeps on working with this change.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-14-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
... and make it return a bool instead.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210903155514.44772-13-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a subchannel becomes pending with unit exception, start
pending (and for that matter, halt or clear pending) are not
removed in the actl. Device active and subchannel active,
however, are (due to the subchannel becoming status pending
with primary respectively secondary status).
The other conditions in the actl are only cleared when the
guest executes tsch on the subchannel.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Jared Rossi <jrossi@linux.ibm.com>
Message-Id: <20210705163952.736020-3-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
move everything related to translate, as well as HELPER code in tcg/
mmu_helper.c stays put for now, as it contains both TCG and KVM code.
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/tcg/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-8-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Wire in the subchannel callback for building the IRB
ESW and ECW space for passthrough devices, and copy
the hardware's ESW into the IRB we are building.
If the hardware presented concurrent sense, then copy
that sense data into the IRB's ECW space.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, all subchannel types have "sense data" copied into
the IRB.ECW space, and a couple flags enabled in the IRB.SCSW
and IRB.ESW. But for passthrough (vfio-ccw) subchannels,
this data isn't populated in the first place, so enabling
those flags leads to unexpected behavior if the guest tries to
process the sense data (zeros) in the IRB.ECW.
Let's add a subchannel callback that builds these portions of
the IRB, and move the existing code into a routine for those
virtual subchannels. The passthrough subchannels will be able
to piggy-back onto this later.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The Interrupt Response Block is comprised of several other
structures concatenated together, but only the 12-byte
Subchannel-Status Word (SCSW) is defined as a proper struct.
Everything else is a simple array of 32-bit words.
Let's define a proper struct for the 20-byte Extended-Status
Word (ESW) so that we can make good decisions about the sense
data that would go into the ECW area for virtual vs
passthrough devices.
[CH: adapted ESW definition to build with mingw, as discussed]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20210617232537.1337506-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The definition S390_ADAPTER_SUPPRESSIBLE was moved to "cpu.h", per
suggestion of Thomas Huth. From interface design perspective, IMHO, not
a good thing as it belongs to the public interface of
css_register_io_adapters(). We did this because CONFIG_KVM requeires
NEED_CPU_H and Thomas, and other commenters did not like the
consequences of that.
Moving the interrupt related declarations to s390_flic.h was suggested
by Cornelia Huck.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Halil Pasic <pasic@linux.ibm.com>
Message-Id: <20210317095622.2839895-2-kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
An assorted set of spelling fixes in various places.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210309111510.79495-1-mjt@msgid.tls.msk.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At least some s390 cpu models support "Protected Virtualization" (PV),
a mechanism to protect guests from eavesdropping by a compromised
hypervisor.
This is similar in function to other mechanisms like AMD's SEV and
POWER's PEF, which are controlled by the "confidential-guest-support"
machine option. s390 is a slightly special case, because we already
supported PV, simply by using a CPU model with the required feature
(S390_FEAT_UNPACK).
To integrate this with the option used by other platforms, we
implement the following compromise:
- When the confidential-guest-support option is set, s390 will
recognize it, verify that the CPU can support PV (failing if not)
and set virtio default options necessary for encrypted or protected
guests, as on other platforms. i.e. if confidential-guest-support
is set, we will either create a guest capable of entering PV mode,
or fail outright.
- If confidential-guest-support is not set, guests might still be
able to enter PV mode, if the CPU has the right model. This may be
a little surprising, but shouldn't actually be harmful.
To start a guest supporting Protected Virtualization using the new
option use the command line arguments:
-object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
The zPCI group and function structures are big endian. However, we do
not consistently store them as big endian locally, and are missing some
conversions.
Let's just store the structures as host endian instead and convert to
big endian when actually handling the instructions retrieving the data.
Also fix the layout of ClpReqQueryPciGrp: g is actually only 8 bit. This
also fixes accesses on little endian hosts, and makes accesses on big
endian hosts consistent.
Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure")
Fixes: 9670ee7527 ("s390x/pci: use a PCI Function structure")
Fixes: 1e7552ff5c ("s390x/pci: get zPCI function info from host")
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201118104202.1301363-1-cohuck@redhat.com>
s390-pci-vfio.c calls into the vfio code, so we need it to be
built conditionally on vfio (which implies CONFIG_LINUX).
Fixes: cd7498d07f ("s390x/pci: Add routine to get the vfio dma available count")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20201103123237.718242-1-cohuck@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
