unix_listen/connect_saddr now support abstract address types
two aditional BOOL switches are introduced:
tight: whether to set @addrlen to the minimal string length,
or the maximum sun_path length. default is TRUE
abstract: whether we use abstract address. default is FALSE
cli example:
-monitor unix:/tmp/unix.socket,abstract,tight=off
OR
-chardev socket,path=/tmp/unix.socket,id=unix1,abstract,tight=on
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
zstd significantly reduces cluster compression time.
It provides better compression performance maintaining
the same level of the compression ratio in comparison with
zlib, which, at the moment, is the only compression
method available.
The performance test results:
Test compresses and decompresses qemu qcow2 image with just
installed rhel-7.6 guest.
Image cluster size: 64K. Image on disk size: 2.2G
The test was conducted with brd disk to reduce the influence
of disk subsystem to the test results.
The results is given in seconds.
compress cmd:
time ./qemu-img convert -O qcow2 -c -o compression_type=[zlib|zstd]
src.img [zlib|zstd]_compressed.img
decompress cmd
time ./qemu-img convert -O qcow2
[zlib|zstd]_compressed.img uncompressed.img
compression decompression
zlib zstd zlib zstd
------------------------------------------------------------
real 65.5 16.3 (-75 %) 1.9 1.6 (-16 %)
user 65.0 15.8 5.3 2.5
sys 3.3 0.2 2.0 2.0
Both ZLIB and ZSTD gave the same compression ratio: 1.57
compressed image size in both cases: 1.4G
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-4-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Users may need to check the xbzrle encoding rate to know if the guest
memory is xbzrle encoding-friendly, and dynamically turn off the
encoding if the encoding rate is low.
Signed-off-by: Yi Sun <yi.y.sun@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
At the tail stage of throttling, the Guest is very sensitive to
CPU percentage while the @cpu-throttle-increment is excessive
usually at tail stage.
If this parameter is true, we will compute the ideal CPU percentage
used by the Guest, which may exactly make the dirty rate match the
dirty rate threshold. Then we will choose a smaller throttle increment
between the one specified by @cpu-throttle-increment and the one
generated by ideal CPU percentage.
Therefore, it is compatible to traditional throttling, meanwhile
the throttle increment won't be excessive at tail stage. This may
make migration time longer, and is disabled by default.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
visit_type_intN() and visit_type_uintN() fail when the value is out of
bounds.
This is appropriate with an input visitor: the value comes from input,
and input may be bad.
It should never happen with the other visitors: the value comes from
the caller, and callers must keep it within bounds. Assert that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-10-armbru@redhat.com>
output_type_enum() fails when *obj is not a valid value of the enum
type. Should not happen. Drop the check, along with its unit tests.
This unmasks qapi_enum_lookup()'s assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-9-armbru@redhat.com>
[Commit message tweaked]
The contract demands v->start_alternate() for input and dealloc
visitors, but visit_start_alternate() actually requires it for input
and clone visitors. Fix the contract, and delete superfluous
qapi_dealloc_start_alternate().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-8-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-7-armbru@redhat.com>
qdict_iter() has just three uses and no test coverage. Replace by
qdict_first(), qdict_next() for more concise code and less type
punning.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200415083048.14339-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Direct leak of 4120 byte(s) in 1 object(s) allocated from:
#0 0x7fa114931887 in __interceptor_calloc (/lib64/libasan.so.6+0xb0887)
#1 0x7fa1144ad8f0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x588f0)
#2 0x561e3c9c8897 in qmp_object_add /home/elmarco/src/qemu/qom/qom-qmp-cmds.c:291
#3 0x561e3cf48736 in qmp_dispatch /home/elmarco/src/qemu/qapi/qmp-dispatch.c:155
#4 0x561e3c8efb36 in monitor_qmp_dispatch /home/elmarco/src/qemu/monitor/qmp.c:145
#5 0x561e3c8f09ed in monitor_qmp_bh_dispatcher /home/elmarco/src/qemu/monitor/qmp.c:234
#6 0x561e3d08c993 in aio_bh_call /home/elmarco/src/qemu/util/async.c:136
#7 0x561e3d08d0a5 in aio_bh_poll /home/elmarco/src/qemu/util/async.c:164
#8 0x561e3d0a535a in aio_dispatch /home/elmarco/src/qemu/util/aio-posix.c:380
#9 0x561e3d08e3ca in aio_ctx_dispatch /home/elmarco/src/qemu/util/async.c:298
#10 0x7fa1144a776e in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x5276e)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200325184723.2029630-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Squashed patches from Richard Henderson modifying
qapi/common.json and tests/machine-none-test.c]
Message-Id: <20200224141923.82118-21-ysato@users.sourceforge.jp>
[PMD: Added @since 5.0 tag in SysEmuTarget]
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We've had all the required pieces for doing a type-safe representation
of netdev_add as a flat union for quite some time now (since
0e55c381f6 in v2.7.0, released in 2016), but did not make the final
switch to using it because of concern about whether a command-line
regression in accepting "1" in place of 1 for integer arguments would
be problematic. Back then, we did not have the deprecation cycle to
allow us to make progress. But now that we have waited so long, other
problems have crept in: for example, our desire to add
qemu-storage-daemon is hampered by the inability to express net
objects, and we are unable to introspect what we actually accept.
Additionally, our round-trip through QemuOpts silently eats any
argument that expands to an array, rendering dnssearch, hostfwd, and
guestfwd useless through QMP:
{"execute": "netdev_add", "arguments": { "id": "netdev0",
"type": "user", "dnssearch": [
{ "str": "8.8.8.8" }, { "str": "8.8.4.4" }
]}}
So without further ado, let's turn on proper QAPI. netdev_add() was a
trivial wrapper around net_client_init(), which did a few steps prior
to calling net_client_init1(); with this patch, we now skip directly
to net_client_init1(). In addition to fixing array parameters, the
following additional differences occur:
- {"execute": "netdev_add", "arguments": {"type": "help"}}
no longer attempts to print help to stdout and exit. Bug fix, broken
in 547203ead4 'net: List available netdevs with "-netdev help"',
v2.12.0.
- {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }}
no longer attempts to desugar the undocumented ipv6-net magic string
into the proper "ipv6-prefix" and "ipv6-prefixlen". Undocumented
misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options
& slirp: Adding Qemu options for IPv6 addresses", v2.6.0.
- {'execute':'netdev_add',
'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}}
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}}
Used to succeed: since our command line treats everything as strings,
our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost
the original typing and turned everything into a string; now that we
skip the QemuOpts, the JSON input has to match the exact QAPI type.
But this stricter QMP is desirable, and introspection is sufficient
for any affected applications to make sure they use it correctly.
In qmp_netdev_add(), we still have to create a QemuOpts object so that
qmp_netdev_del() will be able to remove a hotplugged network device;
but the opts->head remains empty since we now manage all parsing
through the QAPI object rather than QemuOpts; a separate patch will
address the abuse of QemuOpts as a witness for whether a
NetClientState is a netdev. In the meantime, our argument that we are
okay requires auditing all uses of option group "netdev":
- qemu_netdev_opts: option group definition, empty .desc[]
- CLI (CLI netdev parsing ends before monitors start, so while
monitors can mess with CLI netdevs, CLI cannot mess with
monitor netdevs):
- main() case QEMU_OPTION_netdev: store CLI definition
- main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig:
similar, dealing only with CLI
- net_init_clients(): Pass CLI to net_client_init()
- Monitor:
- hmp_netdev_add(): straightforward parse into net_client_init()
- qmp_netdev_add(): subject of this patch, used to add full
object to option group, now just adds bare-bones id
- qmp_netdev_del(), netdev_del_completion(): check the option group
solely for id, as a 'is this a netdev' predicate
Reported-by: Alex Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-2-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since 0b69f6f72c "qapi: remove
qmp_unregister_command()", the command list can be declared const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com>
[Rebased]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add feature 'deprecated' to the deprecated QMP commands, so their
deprecation becomes visible in output of query-qmp-schema. Looks like
this:
{"name": "query-cpus",
"ret-type": "[164]",
"meta-type": "command",
"arg-type": "0",
---> "features": ["deprecated"]}
Management applications could conceivably use this for static
checking.
The deprecated commands are change, cpu-add, migrate-set-cache-size,
migrate_set_downtime, migrate_set_speed, query-cpus, query-events,
query-migrate-cache-size.
The deprecated command arguments are block-commit arguments @base and
@top, and block_set_io_throttle, blockdev-change-medium,
blockdev-close-tray, blockdev-open-tray, eject argument @device.
The deprecated command results are query-cpus-fast result @arch,
query-block result @dirty-bitmaps, query-named-block-nodes result
@encryption_key_missing and result @dirty-bitmaps's member @status.
Same for query-block result @inserted, which mirrors
query-named-block-nodes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-25-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We convert the request object to a QDict twice: first in
qmp_dispatch() to get the request ID, and then again in
qmp_dispatch_check_obj(), which converts to QDict, then checks and
returns it. We can't get the request ID from the latter, because it's
null when the qdict flunks the checks.
Move the checked conversion to QDict from qmp_dispatch_check_obj() to
qmp_dispatch(), and drop the duplicate there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-24-armbru@redhat.com>
Both functions check @request is a QDict, and both have code for
QCO_NO_SUCCESS_RESP. This wasn't the case back when they were
created. It's a sign of muddled responsibilities. Inline. The next
commits will clean up some more.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200317115459.31821-22-armbru@redhat.com>
In v4.1.0, we added feature flags just to struct types (commit
6a8c0b5102^..f3ed93d545), to satisfy an immediate need (commit
c9d4070991 "file-posix: Add dynamic-auto-read-only QAPI feature"). In
v4.2.0, we added them to commands (commit 23394b4c39 "qapi: Add
feature flags to commands") to satisfy another immediate need (commit
d76744e65e "qapi: Allow introspecting fix for savevm's cooperation
with blockdev").
Add them to the remaining definitions: enumeration types, union types,
alternate types, and events.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-13-armbru@redhat.com>
Commit a9b305ba29 "socket: allow wait=false for client socket"
deprecated use of @wait for client socket chardevs, but neglected to
update char.json's doc comment. Make up for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-3-armbru@redhat.com>
The review for patch ed2a4a7941 "audio: proper support for
float samples in mixeng" suggested this would be a good idea.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20200308193321.20668-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently, if the bytes_dirty_period is more than the 50% of
bytes_xfer_period, we start or increase throttling.
If we make this percentage higher, then we can tolerate higher
dirty rate during migration, which means less impact on guest.
The side effect of higher percentage is longer migration time.
We can make this parameter configurable to switch between mig-
ration time first or guest performance first.
The default value is 50 and valid range is 1 to 100.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Anounce that 'blockdev-snapshot' command's permissions allow changing
of the backing file if the 'consistent_read' permission is not required.
This is useful for libvirt to allow late opening of the backing chain
during a blockdev-mirror.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-8-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Starting from ceph Nautilus, RBD has support for namespaces, allowing
for finer grain ACLs on images inside a pool, and tenant isolation.
In the rbd cli tool documentation, the new image-spec and snap-spec are :
- [pool-name/[namespace-name/]]image-name
- [pool-name/[namespace-name/]]image-name@snap-name
When using an non namespace's enabled qemu, it complains about not
finding the image called namespace-name/image-name, thus we only need to
parse the image once again to find if there is a '/' in its name, and if
there is, use what is before it as the name of the namespace to later
pass it to rados_ioctx_set_namespace.
rados_ioctx_set_namespace if called with en empty string or a null
pointer as the namespace parameters pretty much does nothing, as it then
defaults to the default namespace.
The namespace is extracted inside qemu_rbd_parse_filename, stored in the
qdict, and used in qemu_rbd_connect to make it work with both qemu-img,
and qemu itself.
Signed-off-by: Florian Florensa <fflorensa@online.net>
Message-Id: <20200110111513.321728-2-fflorensa@online.net>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds and parses the --monitor option, so that a QMP monitor can be
used in the storage daemon. The monitor offers commands defined in the
QAPI schema at storage-daemon/qapi/qapi-schema.json.
The --monitor options currently allows to create multiple monitors with
the same ID. This part of the interface is considered unstable. We will
reject such configurations as soon as we have a design for the monitor
subsystem to perform these checks. (In the system emulator, we depend on
QemuOpts rejecting duplicate IDs.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new parameter allow_hmp to monitor_init() so that the storage
daemon can disable HMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-20-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a new QAPI-based monitor_init() function. The existing
monitor_init_opts() is rewritten to simply put its QemuOpts parameter
into a visitor and pass the resulting QAPI object to monitor_init().
This will cause some change in those error messages for the monitor
options in the system emulator that are now generated by the visitor
rather than explicitly checked in monitor_init_opts().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-17-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to share the whitelists between the system emulator schema and
the storage daemon schema, so move all the pragmas from the main schema
file into a separate file that can be included from both.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-16-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a --export option to qemu-storage-daemon to export a block node. For
now, only NBD exports are implemented. Apart from the 'type' option
(which is the implied key), it maps the arguments for nbd-server-add to
the command line. Example:
--export nbd,device=disk,name=test-export,writable=on
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-12-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the arguments of nbd-server-add to a new struct BlockExportNbd and
convert the command to 'boxed': true. This makes it easier to share code
with the storage daemon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-11-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a --nbd-server option to qemu-storage-daemon to start the built-in
NBD server right away. It maps the arguments for nbd-server-start to the
command line, with the exception that it uses SocketAddress instead of
SocketAddressLegacy: New interfaces shouldn't use legacy types, and the
additional nesting would be nasty on the command line.
Example (only with required options):
--nbd-server addr.type=inet,addr.host=localhost,addr.port=10809
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-10-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mapping object-add to the command line as is doesn't result in nice
syntax because of the nesting introduced with 'props'. This becomes
nicer and more consistent with device_add and netdev_add when we accept
properties for the object on the top level instead.
'props' is still accepted after this patch, but marked as deprecated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QMP commands that are related to the system emulator and don't make
sense in the context of tools such as qemu-storage-daemon should live in
qapi/block.json rather than qapi/block-core.json. Move them there.
The associated data types are actually also used in code shared with the
tools, so they stay in block-core.json.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-6-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block-core is for everything that isn't related to the system emulator.
Internal snapshots, the NBD server and quorum events make sense in the
tools, too, so move them to block-core.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-5-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This parameter specifies the zstd compression level. The next patch
will put it to use.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This parameter specifies the zlib compression level. The next patch
will put it to use.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This will store the compression method to use. We start with none.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename multifd-method to multifd-compression
When a management application manages node names there's no reason to
recurse into backing images in the output of query-named-block-nodes.
Add a parameter to the command which will return just the top level
structs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <4470f8c779abc404dcf65e375db195cd91a80651.1579509782.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Fixed coding style]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that the error handling in the common block job is fixed, we can
expose the on-error option in QMP instead of hard-coding it as 'report'
in qmp_block_commit().
This fulfills the promise that the old comment in that function made,
even if a bit later than expected: "This will be part of the QMP
command, if/when the BlockdevOnError change for blkmirror makes it in".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-7-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not obvious what 'ignore' actually means for block jobs: It could
be continuing the job and returning success in the end despite the error
(no block job does this). It could also mean continuing and returning
failure in the end (this is what stream does). And it can mean retrying
the failed request later (this is what backup, commit and mirror do).
This (somewhat inconsistent) behaviour was introduced and described for
stream and mirror in commit 32c81a4a6e. backup and commit were
introduced later and use the same model as mirror.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200214200812.28180-2-kwolf@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A handful of QAPI doc comments include lines like
"ppcemb: dropped in 3.1". The doc comment parser will just
put these into whatever the preceding section was; sometimes
that's "Notes", and sometimes it's some random other section,
as with "NetClientDriver" where the "'dump': dropped in 2.12"
line ends up in the "Since:" section.
This tends to render wrongly, more so in the upcoming rST
generator, but sometimes even in the Texinfo, as in the case
of QKeyCode:
ac_bookmarks
since 2.10 altgr, altgr_r: dropped in 2.10
Since commit 3264ffced3 (v4.2.0), we have a better place to tell
users about deprecated and deleted functionality --
qemu-deprecated.texi. These "dropped in" remarks all predate it, and
other feature drops of that vintage are not documented anywhere, so
moving these to qemu-deprecated.texi makes little sense. Drop them
instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-19-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The MigrationInfo::setup-time documentation is the only place where we
use _this_ inline markup for emphasis, commonly rendered in italics.
We would like to switch the doc comments to rST format, but rST
doesn't recognize that markup and emits literal underscores.
Switch to *this* instead. Changes markup to strong emphasis with
Texinfo, commonly rendered as bold. With rST, it will go right back
to emphasis / italics.
rST also uses **this** for strong (commonly rendered bold) where
Texinfo uses *this*. We have one place in the doc comments
which uses strong/bold markup, in qapi/introspect.json:
Note: the QAPI schema is also used to help define *internal*
When we switch to rST that will be rendered as emphasis / italics.
Markus (who wrote that) thinks that using emphasis / italics
there is an improvement, so we leave that markup alone.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-18-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to switch the doc comments to rST format. rST
insists on a blank line before and after a bulleted list, but our
Texinfo doc generator did not. Add some extra blank lines in the doc
comments so they're acceptable rST input.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200213175647.17628-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
A JSON block comment like this:
Returns: nothing on success
If @node is not a valid block device, DeviceNotFound
If @name is not found, GenericError with an explanation
renders like this:
Returns: nothing on success If node is not a valid block device,
DeviceNotFound If name is not found, GenericError with an explanation
because whitespace is not significant.
Use an actual bulleted list, so that the formatting is correct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-14-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-15-peter.maydell@linaro.org>
Message-Id: <20200213175647.17628-16-peter.maydell@linaro.org>
[Three commits squashed into one]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Avoid Texinfo style quoting with `...', because we would like to
switch the doc comments to rST format, and rST treats it as a syntax
error. Use '...' instead, as we do in other doc comments. This looks
OK in Texinfo, and rST formats it as paired-quotation-marks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200213175647.17628-13-peter.maydell@linaro.org>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
