size_t needs a different format specifier, so fix this.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix this compiler warning:
./block/vvfat.c:2285: error: comparison of unsigned expression >= 0 is always true
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With the new gcc format warnings, gcc detected this:
/qemu/hw/virtio-9p.c:1040: error: format ‘%u’ expects type ‘unsigned int’, but argument 4 has type ‘__nlink_t’
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Additional changes:
* Removed 'extern' from drive_add (avoids too long line).
* Removed 'extern' from other functions (makes declarations
consistent with others in same header file).
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since version 4.4.x, gcc supports additional format attributes.
__attribute__ ((format (gnu_printf, 1, 2)))
should be used instead of
__attribute__ ((format (printf, 1, 2))
because QEMU always uses standard format strings (even with mingw32).
The patch replaces format attribute printf / __printf__ by macro
GCC_FMT_ATTR which uses gnu_printf if supported.
It also removes an #ifdef __GNUC__ (not needed any longer).
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Haiku has O_BINARY in fcntl.h.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Math functions are integrated into Haiku's libroot.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Haiku has pthreads integrated into its libroot.so library. No linker arguments
are needed for it, so don't fail if -lpthread and similar don't link.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For compatibility with BeOS, Haiku's error codes are negative whereas recent
POSIX versions require them to be positive. As spotted by François, some
parts of QEMU code rely on this, so use a mapper library to convert them
to positive ones.
Cc: François Revol <revol@free.fr>
Cc: Ingo Weinhold <ingo_weinhold@gmx.de>
Haiku has network functions in libnetwork.so. It doesn't ship libutil.so.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add logic to detect changes in generated files. If the old
and new files are identical, don't touch the generated file.
This avoids a lot of churn since many files depend on trace.h.
Based on suggestion by Paolo Bonzini.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The logic of detecting changes in default-configs/*.mak is
flawed as can be demonstrated by 'touch default-configs/*.mak'
followed by make. This results in a message claiming that user
made changes to the */config-devices.mak files.
Fix by separating the detection of changes made by the user and
changes in the default-configs.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix address truncation in sysbus by using a wider type.
Reported-by: Artyom Tarasenko <atar4qemu@googlemail.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
According to ISO/IEC 9899:1999 7.19.6.1,
the correct length modifier for ptrdiff_t is 't', not 'z'.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
According to ISO/IEC 9899:1999 7.19.6.1,
the correct length modifier for ptrdiff_t is 't', not 'z'.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Add a powerpc 440x5 with the model ID on the Xilinx virtex5.
Connect the 440x5 to the 40x interrupt logic.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
If neither of __FreeBSD__, __FreeBSD_kernel__ and __DragonFly__ is defined,
util.h is included from tap-bsd.c.
Don't include it again if __OpenBSD__ is defined.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix a rpos coordination bug between qpa_run_out() and qpa_thread_out(),
which shows up as playback noises.
qpa_run_out()
qpa_thread_out loop N critical section 1
qpa_run_out() qpa_thread_out loop N doing pa_simple_write()
qpa_run_out() qpa_thread_out loop N doing pa_simple_write()
qpa_thread_out loop N critical section 2
qpa_thread_out loop N+1 critical section 1
qpa_run_out() qpa_thread_out loop N+1 doing pa_simple_write()
In the above scheme, "qpa_thread_out loop N+1 critical section 1" will
get the same rpos as the one used by "qpa_thread_out loop N critical
section 1". So it will be reading dead samples from the old rpos.
The rpos can only be updated back to qpa_thread_out when there is a
qpa_run_out() run between two qpa_thread_out loops.
normal sequence:
qpa_thread_out:
hw->rpos (X0) => local rpos => pa->rpos (X1)
qpa_run_out:
pa->rpos (X1) => hw->rpos (X1)
qpa_thread_out:
hw->rpos (X1) => local rpos => pa->rpos (X2)
buggy sequence:
qpa_thread_out:
hw->rpos (X0) => local rpos => pa->rpos (X1)
qpa_thread_out:
hw->rpos (X0) => local rpos => pa->rpos (X1')
Obviously qpa_run_out() shall be called at least once between any two
qpa_thread_out loops (after pa->rpos is set), in order for the new
qpa_thread_out loop to see the updated rpos.
Setting pa->live to 0 does the trick. The next loop will have to wait
for one qpa_run_out() invocation in order to get a non-zero pa->live
and proceed.
Signed-off-by: malc <av1474@comtv.ru>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Add QEMU version information to the executables, based on earlier
work by C. W. Betts and Robert Riebisch.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't call exit in the trap handler as it causes the return code to be
zero with some buggy shells (dash and pdksh at least) and is useless
here anyway.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init.c.
Haiku doesn't implement madvise() in favor of posix_madvise().
OpenBSD and Solaris 10 don't implement posix_madvise() but madvise().
MinGW implements neither.
Check for madvise() and posix_madvise() in configure and supply qemu_madvise()
as wrapper. Prefer madvise() over posix_madvise() due to flag availability.
Convert all callers to use qemu_madvise() and QEMU_MADV_*.
Note that on Solaris the warning is fixed by moving the madvise() prototype,
not by qemu_madvise() itself. It helps with porting though, and it simplifies
most call sites.
v7 -> v8:
* Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl.
v6 -> v7:
* Adopt madvise() rather than posix_madvise() semantics for returning errors.
* Use EINVAL in place of ENOTSUP.
v5 -> v6:
* Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID.
Spotted by Blue Swirl.
v4 -> v5:
* Introduce QEMU_MADV_INVALID, suggested by Alexander Graf.
Note that this relies on -1 not being a valid advice value.
v3 -> v4:
* Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl.
This will currently break the check in kvm-all.c by calling madvise() with
a supported flag, which will not fail. Ideas/patches welcome.
v2 -> v3:
* Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf.
* Add configure check for madvise(), too.
Add defines to Makefile, not QEMU_CFLAGS.
Convert all callers, untested. Suggested by Blue Swirl.
* Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf.
* Display configure check results.
v1 -> v2:
* Don't rely on posix_madvise() availability, add qemu_madvise().
Suggested by Blue Swirl.
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make it possible for boards to override the kind of interrupt
to be signaled when the decr timer hits. The 405's signal PIT
interrupts while the 440's signal DECR.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
By moving the definition of GCC_ATTR and GCC_FMT_ATTR
from audio_int.h to qemu-common.h these macros are
now generally available for further patches which add
the gcc format attribute.
Newer gcc versions support format gnu_printf which is
better suited for use in QEMU than format printf
(QEMU always uses standard format strings (even with mingw32)).
V2: Use correct operator '==' (instead of '=')
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
./hw/sd.c: In function ‘sd_init’:
./hw/sd.c:443: error: implicit declaration of function ‘qemu_blockalign’
./hw/sd.c:443: error: nested extern declaration of ‘qemu_blockalign’
./hw/sd.c:443: error: assignment makes pointer from integer without a cast
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix two compiler warnings (when format attribute is applied).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix two compiler warnings (when format attribute is applied)
and one error (missing %) in format strings.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
On a clean build, after generating trace.h, make would recurse into *-*-user
without a clue how to build ../trace.o (added to $(obj-y) in Makefile.target)
since its generation rule is in the main Makefile.
The softmmus are seemingly unaffected because the $(TOOLS), which each have
a dependency on $(trace-obj-y), are built first for the build-all target.
Add a dependency on $(trace-obj-y) for %-user, as done for the qemu-* tools.
Let's be paranoid and do the same for %-softmmu while at it, just in case
someone messes with $(TOOLS) or calls the Makefile target directly.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Prerna Saxena <prerna@linux.vnet.ibm.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The blkverify block driver makes investigating image format data
corruption much easier. A raw image initialized with the same contents
as the test image (e.g. qcow2 file) must be provided. The raw image
mirrors read/write operations and is used to verify that data read from
the test image is correct.
See docs/blkverify.txt for more information.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For the RESERVE and RELEASE commands the length must be zero
and xfer_mode must be SCSI_XFER_NONE.
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ensure that pending requests of a SCSI generic device are purged on
system reset. This also avoids calling a NULL function in lsi53c895a.
The lsi code was recently changed to call the .qdev.reset function.
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 used to use bounce buffers for any AIO requests. This does not only imply
unnecessary copying, but also unbounded allocations which should be avoided.
This patch removes bounce buffers from the normal AIO write path. Encrypted
images continue to use a bounce buffer, however with constant size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2 used to use bounce buffers for any AIO requests. This does not only imply
unnecessary copying, but also unbounded allocations which should be avoided.
This patch removes bounce buffers from the normal AIO read path, and constrains
them to a constant size for encrypted images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
IDE is a bit ugly in this respect. For one it doesn't really keep track
of a sector size - most of the protocol is in units of 512 bytes, and we
assume 2048 bytes for CDROMs which is correct most of the time.
Second IDE allocates an I/O buffer long before we know if we're dealing
with a CDROM or not, so increase the alignment for the io_buffer
unconditionally.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We always have a sync for the refcount update when a new cluster is
allocated. If we move this past the COW, we can save an additional sync.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note that the flush is omitted intentionally in qcow2_free_clusters. If
anything, we can leak clusters here if we lose the writes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
