Currently, the interfaces in the pseries machine code for assignment
and setup of interrupts pass around qemu_irq objects. That was done
in an attempt not to be too closely linked to the specific XICS
interrupt controller. However interactions with the device tree setup
made that attempt rather futile, and XICS is part of the PAPR spec
anyway, so this really just meant we had to carry both the qemu_irq
pointers and the XICS irq numbers around.
This mess will just get worse when we add upcoming PCI MSI support,
since that will require tracking a bunch more interrupt. Therefore,
this patch reworks the spapr code to just use XICS irq numbers
(roughly equivalent to GSIs on x86) and only retrieve the qemu_irq
pointers from the XICS code when we need them (a trivial lookup).
This is a reworked and generalized version of an earlier spapr_pci
specific patch from Alexey Kardashevskiy.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix checkpath warning]
Signed-off-by: Alexander Graf <agraf@suse.de>
The pseries platform already contains an IOMMU implementation, since it is
essential for the platform's paravirtualized VIO devices. This IOMMU
support is currently built into the implementation of the VIO "bus" and
the various VIO devices.
This patch converts this code to make use of the new common IOMMU
infrastructure.
We don't yet handle synchronization of map/unmap callbacks vs. invalidations,
this will require some complex interaction with the kernel and is not a
major concern at this stage.
Cc: Alex Graf <agraf@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make qbus children show up as link<> properties. There is no stable
addressing for qbus children so we use an unstable naming convention.
This is okay in QOM though because the composition name is expected to
be what's stable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
PAPR virtual IO (VIO) devices require a unique, but otherwise arbitrary,
"address" used as a token to the hypercalls which manipulate them.
Currently the pseries machine code does an ok job of allocating these
addresses when the legacy -net nic / -serial and so forth options are used
but will fail to allocate them properly when using -device.
Specifically, you can use -device if all addresses are explicitly assigned.
Without explicit assignment, only one VIO device of each type (network,
console, SCSI) will be assigned properly, any further ones will attempt
to take the same address leading to a fatal error.
This patch fixes the situation by adding a proper address allocator to the
VIO "bus" code. This is used both by -device and the legacy options and
default devices. Addresses can still be explicitly assigned with -device
options if desired.
This patch changes the (guest visible) numbering of VIO devices, but since
their addresses are discovered using the device tree and already differ
from the numbering found on existing PowerVM systems, this does not break
compatibility.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the pseries machine contains not one but two somewhat ugly hacks
to allow printing of early debug messages before the guest has properly
read the device tree.
First, we special case H_PUT_TERM_CHAR so that a vtermno of 0 (usually
invalid) will look for a suitable vty and use that. This supports Linux's
early debug code which will use H_PUT_TERM_CHAR with vtermno==0 before
reading the device tree. Second, we support the RTAS display-character call.
This takes no vtermno so we assume the address of the default first VTY.
This patch makes things more consistent by folding the second hack into the
first. Now, display-character uses the existing vty_lookup() function to
do the same search for a suitable VTY.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Scripted conversion:
for file in hw/ppc*.[hc] hw/mpc8544_guts.c hw/spapr*.[hc] hw/virtex_ml507.c hw/xics.c; do
sed -i "s/CPUState/CPUPPCState/g" $file
done
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Right now, DeviceInfo acts as the class for qdev. In order to switch to a
proper ObjectClass derivative, we need to ween all of the callers off of
interacting directly with the info pointer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is a device tree property "/chosen/linux,stdout-path" which indicates
which device should be used as stdout - ie. "the console".
Currently we don't specify anything, which means both firmware and Linux
choose something arbitrarily. Use the routine we added in the last patch
to pick a default vty and specify it as stdout.
Currently SLOF doesn't use the property, but we are hoping to update it
to do so.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
In vty_lookup() we have a special case for supporting early debug in
the kernel. This accepts reg == 0 as a special case to mean "any vty".
We implement this by searching the vtys on the bus and returning the
first we find. This means that the vty we chose depends on the order
the vtys are specified on the QEMU command line - because that determines
the order of the vtys on the bus.
We'd rather the command line order was irrelevant, so instead return
the vty with the lowest reg value. This is still a guess as to what the
user really means, but it is at least stable WRT command line ordering.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
[agraf] fix braces
For forgotten historical reasons, PAPR hypercalls for specific virtual IO
devices (oh which there are quite a number) are registered via a callback
in the VIOsPAPRDeviceInfo structure.
This is kind of ugly, so this patch instead registers hypercalls from
device_init() functions for each device type. This works just as well,
and is cleaner.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PAPR specification defines a virtual TTY/console interface for guest
OSes to use via the H_PUT_TERM_CHAR and H_GET_TERM_CHAR hypercalls. There
can be multiple virtual ttys, so these take a "termno" parameter. This
encodes which vty to use as the 'reg' property on the device tree node
associated with that vty.
However, with the early debug options enabled, the Linux kernel will
attempt debugging output through the vty very early, before it has read
the device tree. In this case it always uses a termno of 0. This works
on the existing PowerVM hypervisor, so we assume there must be a hack /
feature in there which interprets termno==0 to mean the default primary
console.
To help with debugging kernels, including existing distribution kernels,
this patch implements a similar feature / hack in qemu. If termno==0
is supplied to H_{GET,PUT}_TERM_CHAR, they use the first available vty
device instead.
We need to be careful in the case that the user has manually created
an spapr-vty at address 0. So first we search for the specified reg and
only if that doesn't match do we fall back.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
In commit b4a7852735 ("Place pseries vty
devices at addresses more similar to existing machines"), we changed the
default reg for the vty to 0x30000000, however we didn't update the default
value for a user specified vty device. Fix that.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
If qemu is run like:
qemu-system-ppc64 -nodefaults -device spapr-vty
We end up in spapr_vty_init() with dev->chardev == NULL. Currently
that leads to a segfault because we unconditionally call
qemu_chr_add_handlers().
Although we could make that call conditional, I think a spapr-vty
without a chardev is basically useless so fail the init. This is
similar to what the serial code does for example.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Restructure common properties for sPAPR devices so that IRQ definitions
can be added in one place.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Right now the spapr devices cannot be instantiated with -device,
because the IRQs need to be passed to the spapr_*_create functions.
Do this instead in the bus's init wrapper.
This is particularly important with the conversion from scsi-disk
to scsi-{cd,hd} that Markus made. After his patches, if you
specify a scsi-cd device attached to an if=none drive, the default
VSCSI controller will not be created and, without qdevification,
you will not be able to add yours.
NOTE from agraf: added small compile fix
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we have implemented the PAPR "xics" virtualized interrupt
controller, we can add interrupts in PAPR VIO devices. This patch adds
interrupt support to the PAPR virtual tty/console device.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This extends the "pseries" (PAPR) machine to include a virtual IO bus
supporting the PAPR defined hypercall based virtual IO mechanisms.
So far only one VIO device is provided, the vty / vterm, providing
a full console (polled only, for now).
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
