The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20221219130205.687815-3-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw/pci/pci_bridge.h and hw/cxl/cxl.h include each other.
Fortunately, breaking the loop is merely a matter of deleting
unnecessary includes from headers, and adding them back in places
where they are now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-2-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When Qemu is built with --enable-xen and --disable-xen-pci-passthrough
and the target os is linux, the build fails with:
meson.build:3477:2: ERROR: File xen_pt_stub.c does not exist.
Fixes: 582ea95f5f ("meson: convert hw/xen")
Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <5f1342a13c09af77b1a7b0aeaba5955bcea89731.1667242033.git.brchuckz@aol.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Make guest os access pci device control 2 reg for passthrough device
as struct XenPTRegInfo described in the file hw/xen/xen_pt.h.
/* reg read only field mask (ON:RO/ROS, OFF:other) */
uint32_t ro_mask;
/* reg emulate field mask (ON:emu, OFF:passthrough) */
uint32_t emu_mask;
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1196
Signed-off-by: Aaron Liu <Aaron.Liu@amd.com>
Signed-off-by: Ruili Ji <ruili.ji@amd.com>
Message-ID: <BL1PR12MB599341DC55BA53FE588DE14E9B7E9@BL1PR12MB5993.namprd12.prod.outlook.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Currently we are creating a register group for the Intel IGD OpRegion
for every device we pass through, but the XEN_PCI_INTEL_OPREGION
register group is only valid for an Intel IGD. Add a check to make
sure the device is an Intel IGD and a check that the administrator has
enabled gfx_passthru in the xl domain configuration. Require both checks
to be true before creating the register group. Use the existing
is_igd_vga_passthrough() function to check for a graphics device from
any vendor and that the administrator enabled gfx_passthru in the xl
domain configuration, but further require that the vendor be Intel,
because only Intel IGD devices have an Intel OpRegion. These are the
same checks hvmloader and libxl do to determine if the Intel OpRegion
needs to be mapped into the guest's memory. Also, move the comment
about trapping 0xfc for the Intel OpRegion where it belongs after
applying this patch.
Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <c76dff6369ccf2256bd9eed5141da1db767293d2.1656480662.git.brchuckz@aol.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
In xen_pt_config_reg_init(), there is an error in the merging of the
emulated data with the host value. With the current Qemu, instead of
merging the emulated bits with the host bits as defined by emu_mask,
the emulated bits are merged with the host bits as defined by the
inverse of emu_mask. In some cases, depending on the data in the
registers on the host, the way the registers are setup, and the
initial values of the emulated bits, the end result will be that
the register is initialized with the wrong value.
To correct this error, use the XEN_PT_MERGE_VALUE macro to help ensure
the merge is done correctly.
This correction is needed to resolve Qemu project issue #1061, which
describes the failure of Xen HVM Linux guests to boot in certain
configurations with passed through PCI devices, that is, when this error
disables instead of enables the PCI_STATUS_CAP_LIST bit of the
PCI_STATUS register of a passed through PCI device, which in turn
disables the MSI-X capability of the device in Linux guests with the end
result being that the Linux guest never completes the boot process.
Fixes: 2e87512ecc ("xen/pt: Sync up the dev.config and data values")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1061
Buglink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=988333
Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e4392535d8e5266063dc5461d0f1d301e3dd5951.1656522217.git.brchuckz@aol.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Now that igd_passthrough_isa_bridge_create() is implemented within the
xen context it may use Xen* data types directly and become
xen_igd_passthrough_isa_bridge_create(). This resolves an indirection.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220326165825.30794-3-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
igd-passthrough-isa-bridge is only requested in xen_pt but was
implemented in pc_piix.c. This caused xen_pt to dependend on i386/pc
which is hereby resolved.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20220326165825.30794-2-shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_XEN_PCI_PASSTHROUGH is just a global configuration option;
it is never used in the source files, so there is no need to put
CONFIG_XEN_PCI_PASSTHROUGH in config-target.h or even in config-host.h.
This inaccuracy was copied over from the configure script in commit
8a19980e3f ("configure: move accelerator logic to meson", 2020-10-03).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
Do not replicate the individual logging statements.
Use qemu_log_trylock/unlock instead of qemu_log directly.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-9-richard.henderson@linaro.org>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Adaptive polling measures the execution time of the polling check plus
handlers called when a polled event becomes ready. Handlers can take a
significant amount of time, making it look like polling was running for
a long time when in fact the event handler was running for a long time.
For example, on Linux the io_submit(2) syscall invoked when a virtio-blk
device's virtqueue becomes ready can take 10s of microseconds. This
can exceed the default polling interval (32 microseconds) and cause
adaptive polling to stop polling.
By excluding the handler's execution time from the polling check we make
the adaptive polling calculation more accurate. As a result, the event
loop now stays in polling mode where previously it would have fallen
back to file descriptor monitoring.
The following data was collected with virtio-blk num-queues=2
event_idx=off using an IOThread. Before:
168k IOPS, IOThread syscalls:
9837.115 ( 0.020 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 16, iocbpp: 0x7fcb9f937db0) = 16
9837.158 ( 0.002 ms): IO iothread1/620155 write(fd: 103, buf: 0x556a2ef71b88, count: 8) = 8
9837.161 ( 0.001 ms): IO iothread1/620155 write(fd: 104, buf: 0x556a2ef71b88, count: 8) = 8
9837.163 ( 0.001 ms): IO iothread1/620155 ppoll(ufds: 0x7fcb90002800, nfds: 4, tsp: 0x7fcb9f1342d0, sigsetsize: 8) = 3
9837.164 ( 0.001 ms): IO iothread1/620155 read(fd: 107, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.174 ( 0.001 ms): IO iothread1/620155 read(fd: 105, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.176 ( 0.001 ms): IO iothread1/620155 read(fd: 106, buf: 0x7fcb9f939cc0, count: 512) = 8
9837.209 ( 0.035 ms): IO iothread1/620155 io_submit(ctx_id: 140512552468480, nr: 32, iocbpp: 0x7fca7d0cebe0) = 32
174k IOPS (+3.6%), IOThread syscalls:
9809.566 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0cdd62be0) = 32
9809.625 ( 0.001 ms): IO iothread1/623061 write(fd: 103, buf: 0x5647cfba5f58, count: 8) = 8
9809.627 ( 0.002 ms): IO iothread1/623061 write(fd: 104, buf: 0x5647cfba5f58, count: 8) = 8
9809.663 ( 0.036 ms): IO iothread1/623061 io_submit(ctx_id: 140539805028352, nr: 32, iocbpp: 0x7fd0d0388b50) = 32
Notice that ppoll(2) and eventfd read(2) syscalls are eliminated because
the IOThread stays in polling mode instead of falling back to file
descriptor monitoring.
As usual, polling is not implemented on Windows so this patch ignores
the new io_poll_read() callback in aio-win32.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-2-stefanha@redhat.com
[Fixed up aio_set_event_notifier() calls in
tests/unit/test-fdmon-epoll.c added after this series was queued.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
They're actually more commonly used than the helper without _under_bus, because
most callers do have the pci bus on hand. After exporting we can switch a lot
of the call sites to use these two helpers.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20211028043129.38871-3-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
qdev_set_id() is mostly used when the user adds a device (using
-device cli option or device_add qmp command). This commit adds
an error parameter to handle the case where the given id is
already taken.
Also document the function and add a return value in order to
be able to capture success/failure: the function now returns the
id in case of success, or NULL in case of failure.
The commit modifies the 2 calling places (qdev-monitor and
xen-legacy-backend) to add the error object parameter.
Note that the id is, right now, guaranteed to be unique because
all ids came from the "device" QemuOptsList where the id is used
as key. This addition is a preparation for a future commit which
will relax the uniqueness.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-10-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Provide a name field for all the memory listeners. It can be used to identify
which memory listener is which.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210817013553.30584-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the "allocate and return" qbus creation function to
qbus_new(), to bring it into line with our _init vs _new convention.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20210923121153.23754-6-peter.maydell@linaro.org
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include qemu/log.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210328054833.2351597-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Many files include hw/sysbus.h without needing it. Remove the superfluous
include statements.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210327082804.2259480-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This property can be useful for distros to set up known-good ROM sizes for
migration purposes. The VM will fail to start if the ROM is too large,
and migration compatibility will not be broken if the ROM is too small.
Note that even though romsize is a uint32_t, it has to be between 1
(because empty ROM files are not accepted, and romsize must be greater
than the file) and 2^31 (because values above are not powers of two and
are rejected).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201218182736.1634344-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210203131828.156467-3-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Fix code style. Don't use '#' flag of printf format ('%#') in
format strings, use '0x' prefix instead
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-Id: <20201104133709.3326630-1-zhangxinhao1@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently a single watch on /local/domain/X/backend is registered by each
QEMU process running in service domain X (where X is usually 0). The purpose
of this watch is to ensure that QEMU is notified when the Xen toolstack
creates a new device backend area.
Such a backend area is specific to a single frontend area created for a
specific guest domain and, since each QEMU process is also created to service
a specfic guest domain, it is unnecessary and inefficient to notify all QEMU
processes.
Only the QEMU process associated with the same guest domain need
receive the notification. This patch re-factors the watch registration code
such that notifications are targetted appropriately.
Reported-by: Jerome Leseinne <jerome.leseinne@gmail.com>
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20201001081500.1026-1-paul@xen.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Regularize our handling of <sys/signal.h>: currently we include it in
osdep.h, but only for OpenBSD, and we include it without an ifdef
guard in a couple of C files. This causes problems for Haiku, which
doesn't have that header.
Instead, check in configure whether sys/signal.h exists, and if it
does then always include it from osdep.h.
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200703145614.16684-5-peter.maydell@linaro.org
[PMM: Expanded commit message; rename to HAVE_SYS_SIGNAL_H]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)
If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). No such cases are being fixed here.
This commit is generated by command
sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-9-armbru@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again.]
Replace
error_setg(&err, ...);
error_propagate(errp, err);
by
error_setg(errp, ...);
Related pattern:
if (...) {
error_setg(&err, ...);
goto out;
}
...
out:
error_propagate(errp, err);
return;
When all paths to label out are that way, replace by
if (...) {
error_setg(errp, ...);
return;
}
and delete the label along with the error_propagate().
When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.
foo(..., &err);
if (err) {
goto out;
}
...
bar(..., &err);
out:
error_propagate(errp, err);
return;
move the error_propagate() to where it's needed, like
if (...) {
foo(..., &err);
error_propagate(errp, err);
return;
}
...
bar(..., errp);
return;
and transform the error_setg() as above.
In some places, the transformation results in obviously unnecessary
error_propagate(). The next few commits will eliminate them.
Bonus: the elimination of gotos will make later patches in this series
easier to review.
Candidates for conversion tracked down with this Coccinelle script:
@@
identifier err, errp;
expression list args;
@@
- error_setg(&err, args);
+ error_setg(errp, args);
... when != err
error_propagate(errp, err);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
xen-sysdev is a TYPE_SYS_BUS_DEVICE. bus_type should not be changed so
that it can plug into the System bus. Otherwise this assert triggers:
qemu-system-i386: hw/core/qdev.c:102: qdev_set_parent_bus: Assertion
`dc->bus_type && object_dynamic_cast(OBJECT(bus), dc->bus_type)'
failed.
TYPE_XENBACKEND attaches to TYPE_XENSYSBUS, so its class_init needs to
be set accordingly to attach the qdev. Otherwise the following assert
triggers:
qemu-system-i386: hw/core/qdev.c:102: qdev_set_parent_bus: Assertion
`dc->bus_type && object_dynamic_cast(OBJECT(bus), dc->bus_type)'
failed.
TYPE_XENBACKEND is not a subclass of XEN_XENSYSDEV, so it's parent
is just TYPE_DEVICE. Change that.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Acked-by: Paul Durrant <pdurrant@amazon.com>
Fixes: 81cb05732e ("qdev: Assert devices are plugged into a bus that can take them")
Message-Id: <20200624121939.10282-1-jandryuk@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
All callers pass &error_abort. Drop the parameter.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-14-armbru@redhat.com>
In addition to the qdev_create() patterns converted so far, we have a
qdev_set_parent_bus() pattern. Mostly when we embed a device in a
parent device rather than allocating it on the heap.
This pattern also puts devices in the dangerous "no QOM parent, but
plugged into bus" state I explained in recent commit "qdev: New
qdev_new(), qdev_realize(), etc."
Apply same solution: convert to qdev_realize(). Coccinelle script:
@@
expression dev, bus, errp;
symbol true;
@@
- qdev_set_parent_bus(DEVICE(dev), bus);
...
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), bus, errp);
@ depends on !(file in "qdev-monitor.c") && !(file in "hw/core/qdev.c")@
expression dev, bus, errp;
symbol true;
@@
- qdev_set_parent_bus(dev, bus);
...
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(dev, bus, errp);
@@
expression dev, bus;
symbol true;
@@
- qdev_set_parent_bus(DEVICE(dev), bus);
...
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize(DEVICE(dev), bus, &error_fatal);
Unconverted uses of qdev_set_parent_bus() remain. They'll be
converted later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-12-armbru@redhat.com>
[Also convert new hw/virtio/vhost-user-vsock-pci.c]
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
Xen PCI passthrough support may not be available and thus the global
variable "has_igd_gfx_passthru" might be compiled out. Common code
should not access it in that case.
Unfortunately, we can't use CONFIG_XEN_PCI_PASSTHROUGH directly in
xen-common.c so this patch instead move access to the
has_igd_gfx_passthru variable via function and those functions are
also implemented as stubs. The stubs will be used when QEMU is built
without passthrough support.
Now, when one will want to enable igd-passthru via the -machine
property, they will get an error message if QEMU is built without
passthrough support.
Fixes: 46472d8232 ('xen: convert "-machine igd-passthru" to an accelerator property')
Reported-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200603160442.3151170-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The DEVICE() macro is defined as:
#define DEVICE(obj) OBJECT_CHECK(DeviceState, (obj), TYPE_DEVICE)
which expands to:
((DeviceState *)object_dynamic_cast_assert((Object *)(obj), (name),
__FILE__, __LINE__,
__func__))
This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.
Remove the unnecessary DEVICE() casts when we already know the
pointer is of DeviceState type.
Patch created mechanically using spatch with this script:
@@
typedef DeviceState;
DeviceState *s;
@@
- DEVICE(s)
+ s
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-4-f4bug@amsat.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
The conversion of xen_pt_initfn() to xen_pt_realize() blindly replaced
XEN_PT_ERR() by error_setg(). Several error conditions that did not
fail xen_pt_initfn() now fail xen_pt_realize(). Unsurprisingly, the
cleanup on these errors looks highly suspicious.
Revert the inappropriate replacements.
Fixes: 5a11d0f754
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20200422130719.28225-10-armbru@redhat.com>
