All functions were internal, except blk_mig_init() that is exported in
misc.h now.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All functions are internal except for ram_mig_init(). Create
migration/misc.h for this kind of functions.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Start removing migration code from sysemu/sysemu.h.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The commands 'device_add' and 'device_del' should be used
nowadays instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1495175803-12830-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The '-usbdevice' option is considered as deprecated nowadays and
we might want to remove these options in a future version of QEMU.
So mark this options as deprecated in the documenation and print out
a warning if it is used to tell the user what to use instead.
While we're at it, improve also some other minor USB-related spots
in qemu-options.hx that were not up to date anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1495175716-12735-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Libvirt would like to be able to distinguish between a SHUTDOWN
event triggered solely by guest request and one triggered by a
SIGTERM or other action on the host. While qemu_kill_report() was
already able to give different output to stderr based on whether a
shutdown was triggered by a host signal (but NOT by a host UI event,
such as clicking the X on the window), that information was then
lost to management. The previous patches improved things to use an
enum throughout all callsites, so now we have something ready to
expose through QMP.
Note that for now, the decision was to expose ONLY a boolean,
rather than promoting ShutdownCause to a QAPI enum; this is because
libvirt has not expressed an interest in anything finer-grained.
We can still add additional details, in a backwards-compatible
manner, if a need later arises (if the addition happens before 2.10,
we can replace the bool with an enum; otherwise, the enum will have
to be in addition to the bool); this patch merely adds a helper
shutdown_caused_by_guest() to map the internal enum into the
external boolean.
Update expected iotest outputs to match the new data (complete
coverage of the affected tests is obtained by -raw, -qcow2, and -nbd).
Here is output from 'virsh qemu-monitor-event --loop' with the
patch installed:
event SHUTDOWN at 1492639680.731251 for domain fedora_13: {"guest":true}
event STOP at 1492639680.732116 for domain fedora_13: <null>
event SHUTDOWN at 1492639680.732830 for domain fedora_13: {"guest":false}
Note that libvirt runs qemu with -no-shutdown: the first SHUTDOWN event
was triggered by an action I took directly in the guest (shutdown -h),
at which point qemu stops the vcpus and waits for libvirt to do any
final cleanups; the second SHUTDOWN event is the result of libvirt
sending SIGTERM now that it has completed cleanup. Libvirt is already
smart enough to only feed the first qemu SHUTDOWN event to the end user
(remember, virsh qemu-monitor-event is a low-level debugging interface
that is explicitly unsupported by libvirt, so it sees things that normal
end users do not); changing qemu to emit SHUTDOWN only once is outside
the scope of this series.
See also https://bugzilla.redhat.com/1384007
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Time to wire up all the call sites that request a shutdown or
reset to use the enum added in the previous patch.
It would have been less churn to keep the common case with no
arguments as meaning guest-triggered, and only modified the
host-triggered code paths, via a wrapper function, but then we'd
still have to audit that I didn't miss any host-triggered spots;
changing the signature forces us to double-check that I correctly
categorized all callers.
Since command line options can change whether a guest reset request
causes an actual reset vs. a shutdown, it's easy to also add the
information to reset requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part]
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts]
Message-Id: <20170515214114.15442-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
With the recent addition of ShutdownCause, we want to be able to pass
a cause through any shutdown request, and then faithfully replay that
cause when later replaying the same sequence. The easiest way is to
expand the reply event mechanism to track a series of values for
EVENT_SHUTDOWN, one corresponding to each value of ShutdownCause.
We are free to change the replay stream as needed, since there are
already no guarantees about being able to use a replay stream by
any other version of qemu than the one that generated it.
The cause is not actually fed back until the next patch changes the
signature for requesting a shutdown; a TODO marks that upcoming change.
Yes, this uses the gcc/clang extension of a ranged case label,
but this is not the first time we've used non-C99 constructs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170515214114.15442-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We want to track why a guest was shutdown; in particular, being able
to tell the difference between a guest request (such as ACPI request)
and host request (such as SIGINT) will prove useful to libvirt.
Since all requests eventually end up changing shutdown_requested in
vl.c, the logical change is to make that value track the reason,
rather than its current 0/1 contents.
Since command-line options control whether a reset request is turned
into a shutdown request instead, the same treatment is given to
reset_requested.
This patch adds an internal enum ShutdownCause that describes reasons
that a shutdown can be requested, and changes qemu_system_reset() to
pass the reason through, although for now nothing is actually changed
with regards to what gets reported. The enum could be exported via
QAPI at a later date, if deemed necessary, but for now, there has not
been a request to expose that much detail to end clients.
For the most part, we turn 0 into SHUTDOWN_CAUSE_NONE, and 1 into
SHUTDOWN_CAUSE_HOST_ERROR; the only specific case where we have enough
information right now to use a different value is when we are reacting
to a host signal. It will take a further patch to edit all call-sites
that can trigger a reset or shutdown request to properly pass in any
other reasons; this patch includes TODOs to point such places out.
qemu_system_reset() trades its 'bool report' parameter for a
'ShutdownCause reason', with all non-zero values having the same
effect; this lets us get rid of the weird #defines for VMRESET_*
as synonyms for bools.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no signal 0 (kill(pid, 0) has special semantics to probe whether
a process is alive), rather than actually sending a signal 0). So we
can use the simpler 0, instead of -1, for our sentinel of whether a
shutdown request due to a signal has happened.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <20170515214114.15442-2-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All the functions in hw/audio/audio.h are called "soundhw_*()"
and live in hw/audio/audiohw.c. Rename the header file for
consistency.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 20170508205735.23444-4-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To make it consistent with the remaining soundhw.c functions and
avoid confusion with the audio_init() function in audio/audio.c,
rename audio_init() to soundhw_init().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 20170508205735.23444-3-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's no reason to keep the soundhw table in arch_init.c. Move
that code to a new hw/audio/soundhw.c file.
While moving the code, trivial coding style issues were fixed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170508205735.23444-2-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This way we use the "normal" way of printing errors for hmp commands.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
-----BEGIN PGP SIGNATURE-----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=48wH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-05-11
Highlights:
* New "-numa cpu" option
* NUMA distance configuration
* migration/i386 vmstatification
# gpg: Signature made Thu 11 May 2017 08:16:07 PM BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# gpg: Note: This key has expired!
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* ehabkost/tags/x86-and-machine-pull-request: (29 commits)
migration/i386: Remove support for pre-0.12 formats
vmstatification: i386 FPReg
migration/i386: Remove old non-softfloat 64bit FP support
tests: check -numa node,cpu=props_list usecase
numa: add '-numa cpu,...' option for property based node mapping
numa: remove node_cpu bitmaps as they are no longer used
numa: use possible_cpus for not mapped CPUs check
machine: call machine init from wrapper
numa: remove no longer need numa_post_machine_init()
tests: numa: add case for QMP command query-cpus
QMP: include CpuInstanceProperties into query_cpus output output
virt-arm: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
spapr: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
pc: get numa node mapping from possible_cpus instead of numa_get_node_for_cpu()
numa: do default mapping based on possible_cpus instead of node_cpu bitmaps
numa: mirror cpu to node mapping in MachineState::possible_cpus
numa: add check that board supports cpu_index to node mapping
virt-arm: add node-id property to CPU
pc: add node-id property to CPU
spapr: add node-id property to sPAPR core
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add egl-headless user interface. It doesn't provide a real user
interface, it only provides opengl support using drm render nodes.
It will copy back the bits rendered by the guest using virgl back
to a DisplaySurface and kick the usual display update code paths,
so spice and vnc and screendump can pick it up.
Use it this way:
qemu -display egl-headless -vnc $display
qemu -display egl-headless -spice gl=off,$args
Note that you should prefer native spice opengl support (-spice
gl=on) if possible because that delivers better performance.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170505104101.30589-7-kraxel@redhat.com
add machine_run_board_init() wrapper that calls machine
init for now but in follow up patches it will be used
to run generic machine code that should run before
machine init.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-15-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
CPUState::numa_node is still in use but now it's set by
board when it creates CPU objects. So there isn't any
need to set it again after all CPU's are created,
since it's been already set.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1494415802-227633-14-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Originally CPU threads were by default assigned in
round-robin fashion. However it was causing issues in
guest since CPU threads from the same socket/core could
be placed on different NUMA nodes.
Commit fb43b73b (pc: fix default VCPU to NUMA node mapping)
fixed it by grouping threads within a socket on the same node
introducing cpu_index_to_socket_id() callback and commit
20bb648d (spapr: Fix default NUMA node allocation for threads)
reused callback to fix similar issues for SPAPR machine
even though socket doesn't make much sense there.
As result QEMU ended up having 3 default distribution rules
used by 3 targets /virt-arm, spapr, pc/.
In effort of moving NUMA mapping for CPUs into possible_cpus,
generalize default mapping in numa.c by making boards decide
on default mapping and let them explicitly tell generic
numa code to which node a CPU thread belongs to by replacing
cpu_index_to_socket_id() with @cpu_index_to_instance_props()
which provides default node_id assigned by board to specified
cpu_index.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1494415802-227633-2-git-send-email-imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When using a virtfs root filesystem, the mount_tag needs to be set to
/dev/root. This can be done long-hand as
-fsdev local,id=root,path=/path/to/rootfs,...
-device virtio-9p-pci,fsdev=root,mount_tag=/dev/root
but the -virtfs shortcut cannot be used as it hard-codes the device identifier
to match the mount_tag, and device identifiers may not contain '/':
$ qemu-system-x86_64 -virtfs local,path=/foo,mount_tag=/dev/root,security_model=passthrough
qemu-system-x86_64: -virtfs local,path=/foo,mount_tag=/dev/root,security_model=passthrough: duplicate fsdev id: /dev/root
To support this case using -virtfs, we allow the device identifier to be
specified explicitly when the mount_tag is not suitable:
-virtfs local,id=root,path=/path/to/rootfs,mount_tag=/dev/root,...
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
but it'll come in the next pull request.
* use GDB XML register description for x86
* use _Static_assert in QEMU_BUILD_BUG_ON
* add "R:" to MAINTAINERS and get_maintainers
* checkpatch improvements
* dump threading fixes
* first part of vhost-user-scsi support
* QemuMutex tracing
* vmw_pvscsi and megasas fixes
* sgabios module update
* use Rev3 (ACPI 2.0) FADT
* deprecate -hdachs
* improve -accel documentation
* hax fix
* qemu-char GSource bugfix
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZDE+gAAoJEL/70l94x66DIpYH/1IOz3u8ObD8D4Lor07LkCCZ
vWFnTBMgGi9gTL5JQDnukRR3cmNp9EVOtAP5Yf+v+/Xqyq/FNGnoVWxCxEby7LtN
zrIXbsKMCaEcGzRNJFcbKV+KZnzkJrz92J0NHy29ruCK1AsslOXAWf4Qb1MV+fQl
6w2Upsh35usvWCNpFm2o8arzMEmNuE2xJDPKUB11GMrZT6TExq4Zqa8Zj1Ihc0sX
XcDr+eeBmb65Vv3jQLntOhSWAy0Xxf/fDXYTQx+JLHFgvpSOIWMiS+fqIVXtT0bH
0E4hQrBr0qjes8n8+9WGGQW2k8Ak0QlDvrZnQ97hTeV1k6SxW+2ATO2mLeJp9TM=
=5hf2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'bonzini/tags/for-upstream' into staging
A large set of small patches. I have not included yet vhost-user-scsi,
but it'll come in the next pull request.
* use GDB XML register description for x86
* use _Static_assert in QEMU_BUILD_BUG_ON
* add "R:" to MAINTAINERS and get_maintainers
* checkpatch improvements
* dump threading fixes
* first part of vhost-user-scsi support
* QemuMutex tracing
* vmw_pvscsi and megasas fixes
* sgabios module update
* use Rev3 (ACPI 2.0) FADT
* deprecate -hdachs
* improve -accel documentation
* hax fix
* qemu-char GSource bugfix
# gpg: Signature made Fri 05 May 2017 06:10:40 AM EDT
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* bonzini/tags/for-upstream: (21 commits)
vhost-scsi: create a vhost-scsi-common abstraction
libvhost-user: replace vasprintf() to fix build
get_maintainer: add subsystem to reviewer output
get_maintainer: --r (list reviewer) is on by default
get_maintainer: it's '--pattern-depth', not '-pattern-depth'
get_maintainer: Teach get_maintainer.pl about the new "R:" tag
MAINTAINERS: Add "R:" tag for self-appointed reviewers
Fix the -accel parameter and the documentation for 'hax'
dump: Acquire BQL around vm_start() in dump thread
hax: Fix memory mapping de-duplication logic
checkpatch: Disallow glib asserts in main code
trace: add qemu mutex lock and unlock trace events
vmw_pvscsi: check message ring page count at initialisation
sgabios: update for "fix wrong video attrs for int 10h,ah==13h"
scsi: avoid an off-by-one error in megasas_mmio_write
vl: deprecate the "-hdachs" option
use _Static_assert in QEMU_BUILD_BUG_ON
target/i386: Add GDB XML register description support
char: Fix removing wrong GSource that be found by fd_in_tag
hw/i386: Build-time assertion on pc/q35 reset register being identical.
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since 'hax' is a possible accelerator nowadays, too, the '-accel'
option should support it and we should mention this accelerator
in the documentation, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1493875481-16388-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the user needs to specify the disk geometry, the corresponding
parameters of the "-device ide-hd" option should be used instead.
"-hdachs" is considered as deprecated and might be removed soon.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1493270454-1448-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the user needs to specify the disk geometry, the corresponding
parameters of the "-device ide-hd" option should be used instead.
"-hdachs" is considered as deprecated and might be removed soon.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a command-line option (-xen-domid-restrict) which will
use the new libxendevicemodel API to restrict devicemodel [1] operations
to the specified domid. (Such operations are not applicable to the xenpv
machine type).
This patch also adds a tracepoint to allow successful enabling of the
restriction to be monitored.
[1] I.e. operations issued by libxendevicemodel. Operation issued by other
xen libraries (e.g. libxenforeignmemory) are currently still unrestricted
but this will be rectified by subsequent patches.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This optimization is not necessary anymore, because the vCPU now drops
the I/O thread lock even with TCG. Drop it to simplify the code and
avoid the "I/O thread spun for 1000 iterations" warning.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The sense of the test was inverted. Make it simple, if icount is
enabled then we disabled MTTCG by default. If the user tries to force
MTTCG upon us then we tell them "no".
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The new command line option -blockdev works like QMP command
blockdev-add.
The option argument may be given in JSON syntax, exactly as in QMP.
Example usage:
-blockdev '{"node-name": "foo", "driver": "raw", "file": {"driver": "file", "filename": "foo.img"} }'
The JSON argument doesn't exactly blend into the existing option
syntax, so the traditional KEY=VALUE,... syntax is also supported,
using dotted keys to do the nesting:
-blockdev node-name=foo,driver=raw,file.driver=file,file.filename=foo.img
This does not yet support lists, but that will be addressed shortly.
Note that calling qmp_blockdev_add() (say via qmp_marshal_block_add())
right away would crash. We need to stash the configuration for later
instead. This is crudely done, and bypasses QemuOpts, even though
storing configuration is what QemuOpts is for. Need to revamp option
infrastructure to support QAPI types like BlockdevOptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-22-git-send-email-armbru@redhat.com>
The way we get QMP commands registered is high tech:
* qapi-commands.py generates qmp_init_marshal() that does the actual work
* it also generates the magic to register it as a MODULE_INIT_QAPI
function, so it runs when someone calls
module_call_init(MODULE_INIT_QAPI)
* main() calls module_call_init()
QEMU needs to register a few non-qapified commands. Same high tech
works: monitor.c has its own qmp_init_marshal() along with the magic
to make it run in module_call_init(MODULE_INIT_QAPI).
QEMU also needs to unregister commands that are not wanted in this
build's configuration (commit 5032a16). Simple enough:
qmp_unregister_commands_hack(). The difficulty is to make it run
after the generated qmp_init_marshal(). We can't simply run it in
monitor.c's qmp_init_marshal(), because the order in which the
registered functions run is indeterminate. So qmp_init_marshal()
registers qmp_unregister_commands_hack() separately. Since
registering *appends* to the list of registered functions, this will
make it run after all the functions that have been registered already.
I suspect it takes a long and expensive computer science education to
not find this silly.
Dumb it down as follows:
* Drop MODULE_INIT_QAPI entirely
* Give the generated qmp_init_marshal() external linkage.
* Call it instead of module_call_init(MODULE_INIT_QAPI)
* Except in QEMU proper, call new monitor_init_qmp_commands() that in
turn calls the generated qmp_init_marshal(), registers the
additional commands and unregisters the unwanted ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
In commit af6bf1328e (May 2011),
ide-hd, ide-cd and scsi-cd have been added to disable default cdrom,
"or else you can't put one on secondary master without -nodefaults".
Make it the same for scsi-hd, so you can put one on scsi-id 2 without
using -nodefaults.
scsi-hd has probably been forgotten, as it has been added in the
preceding commit (b443ae6713).
Affected users are the ones using a machine with SCSI devices and start QEMU
with -device scsi-hd but without -device scsi-cd or -cdrom
In that case, the default cdrom device will disappear instead of being empty.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-Id: <1487623279-29930-1-git-send-email-hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Message-Id: <1487614915-18710-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We know there will be cases where MTTCG won't work until additional work
is done in the front/back ends to support. It will however be useful to
be able to turn it on.
As a result MTTCG will default to off unless the combination is
supported. However the user can turn it on for the sake of testing.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[AJB: move to -accel tcg,thread=multi|single, defaults]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Generic helper machine_query_hotpluggable_cpus() replaced
target specific query_hotpluggable_cpus() callbacks so
there is no need in it anymore. However inon NULL callback
value is used to detect/report hotpluggable cpus support,
therefore it can be removed completely.
Replace it with MachineClass.has_hotpluggable_cpus boolean
which is sufficient for the task.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.
Drives defined with if=scsi are also picked up by SCSI HBAs added with
-device, unlike other interface types. Deprecate this usage, as follows.
Create the frontends for onboard HBAs in machine initialization code,
exactly like we do for if=ide and other interface types. Change
scsi_legacy_handle_cmdline() to create a frontend only when it's still
missing, and warn that this usage is deprecated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
The logic to create frontends for -drive if=scsi is in SCSI HBAs. For
all other interface types, it's in machine initialization code.
A few machine types create the SCSI HBAs necessary for that. That's
also not done for other interface types.
I'm going to deprecate these SCSI eccentricities. In preparation for
that, create the frontends in main() instead of the SCSI HBAs, by
calling new function scsi_legacy_handle_cmdline() there.
Note that not all SCSI HBAs create frontends. Take care not to change
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-2-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
There is a suitable log mask for the purpose.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-4-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it's not very convenient to use the crash-information property interface,
so provide a CPU class callback to get the guest crash information, and pass
that information in the event
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the Qemu initialization, we call the cpu_synchronize_all_post_init()
to synchronize All CPU states to KVM in the ./vl.c::main().
Currently, it is called before we initialize the CPUs, which is created
by "-device" command and parsed by generic devices initialization, So,
these CPUs may be ignored to synchronize.
The patch moves the cpu_synchronize_all_post_init func after generic
devices initialization to make sure that all the CPUs can be included.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Message-Id: <1485916178-17838-1-git-send-email-douly.fnst@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch:
* moves vm_start to cpus.c.
* exports qemu_vmstop_requested, since it's needed by vm_start.
* extracts vm_prepare_start from vm_start; it does what vm_start did,
except restarting the cpus.
* vm_start now calls vm_prepare_start and then restarts the cpus.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1487092068-16562-2-git-send-email-imbrenda@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce rules in the top level Makefile that are able to generate
trace.[ch] files in every subdirectory which has a trace-events file.
The top level directory is handled specially, so instead of creating
trace.h, it creates trace-root.h. This allows sub-directories to
include the top level trace-root.h file, without ambiguity wrt to
the trace.g file in the current sub-dir.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170125161417.31949-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Turn Chardev into Object.
qemu_chr_alloc() is replaced by the qemu_chardev_new() constructor. It
will call qemu_char_open() to open/intialize the chardev with the
ChardevCommon *backend settings.
The CharDriver::create() callback is turned into a ChardevClass::open()
which is called from the newly introduced qemu_chardev_open().
"chardev-gdb" and "chardev-hci" are internal chardev and aren't
creatable directly with -chardev. Use a new internal flag to disable
them. We may want to use TYPE_USER_CREATABLE interface instead, or
perhaps allow -chardev usage.
Although in general we keep typename and macros private, unless the type
is being used by some other file, in this patch, all types and common
helper macros for qemu-char.c are in char.h. This is to help transition
now (some types must be declared early, while some aren't shared) and
when splitting in several units. This is to be improved later.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pick a uniform chardev type name.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit f57b4b5f moved qemu_iscsi_opts into vl.c. This
made them invisible for qemu-img, qemu-nbd etc.
Fixes: f57b4b5fb1
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1485262161-18543-1-git-send-email-pl@kamp.de>
[Drop useless #ifdef. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements initial vmstate creation or loading at the start
of record/replay. It is needed for rewinding the execution in the replay mode.
v4 changes:
- snapshots are not created by default anymore
v3 changes:
- added rrsnapshot option
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170124071746.4572.61449.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new option "--only-migratable" in qemu which will allow to add
only those devices which will not fail qemu after migration. Devices
set with the flag 'unmigratable' cannot be added when this option will
be used.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Message-Id: <1484566314-3987-3-git-send-email-ashijeetacharya@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The existing default_config_files table in arch_init.c has a
single entry, making it completely unnecessary. The whole code
can be replaced by a single qemu_read_config_file() call in vl.c.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170117180051.11958-1-ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In the numa_post_machine_init(), we use CPU_FOREACH macro to set all
CPUs' namu_node. So, we should make sure that we call it after Qemu
has already initialied all the CPUs.
As we all know, the CPUs can be created by "-smp"(pc_new_cpu) or
"-device"(qdev_device_add) command. But, before the device init,
Qemu execute the numa_post_machine_init earlier. It makes the mapping
of NUMA nodes and CPUs incorrect.
The patch move the numa_post_machine_init func in the appropriate
location.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Message-Id: <1484664152-24446-2-git-send-email-douly.fnst@cn.fujitsu.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Use the Intel HAX is kernel-based hardware acceleration module for
Windows (similar to KVM on Linux).
Based on the "target/i386: Add Intel HAX to android emulator" patch
from David Chou <david.j.chou@intel.com>
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Message-Id: <7b9cae28a0c379ab459c7a8545c9a39762bd394f.1484045952.git.vpalatin@chromium.org>
[Drop hax_populate_ram stub. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub
instead, so that -acpitable can be later extended to ARM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
They are small, it is not worth stubbing them. Just include them
in user-mode emulators and unit tests as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-smbios command line options were accepted but silently ignored on
TARGET_ARM, due to a test for TARGET_I386 in arch_init.c.
Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub
instead, enabled for all targets without CONFIG_SMBIOS.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
so it won't impose an additional limits on max_cpus limits
supported by different targets.
It removes global MAX_CPUMASK_BITS constant and need to
bump it up whenever max_cpus is being increased for
a target above MAX_CPUMASK_BITS value.
Use runtime max_cpus value instead to allocate sufficiently
sized node_cpu bitmasks in numa parser.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1479466974-249781-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Added asserts to ensure cpu_index < max_cpus]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds support of recording and replaying network packets in
irount rr mode.
Record and replay for network interactions is performed with the network filter.
Each backend must have its own instance of the replay filter as follows:
-netdev user,id=net1 -device rtl8139,netdev=net1
-object filter-replay,id=replay,netdev=net1
Replay network filter is used to record and replay network packets. While
recording the virtual machine this filter puts all packets coming from
the outer world into the log. In replay mode packets from the log are
injected into the network device. All interactions with network backend
in replay mode are disabled.
v5 changes:
- using iov_to_buf function instead of loop
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
With current code, pid file is open after various
sockets, chardevs, fsdevs and the like. This causes
interesting effects, for example when monitor is a
unix-socket, and another qemu instance is already
running, new qemu first "damages" the socket and
next complain that it can't acquire the pid file and
exits, making running qemu unreachable.
Move pid file creation earlier, right after the call
to os_daemonize(), where we know our process id (pid).
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Message-Id: <1478096330-18081-1-git-send-email-mjt@msgid.tls.msk.ru>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For automated testing purposes it can be helpful to exit qemu
(poweroff) when the guest panics. Make this the default unless
-no-shutdown is specified.
For internal-errors like errors from KVM_RUN the behaviour is
not changed, in other words QEMU does not exit to allow debugging
in the QEMU monitor.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1476775794-108012-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=sur7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' into staging
Migration bits from the COLO project
# gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT
# gpg: using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg: aka "Amit Shah <amit@kernel.org>"
# gpg: aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6
# Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670
* remotes/amit-migration/tags/migration-for-2.8:
MAINTAINERS: Add maintainer for COLO framework related files
configure: Support enable/disable COLO feature
docs: Add documentation for COLO feature
COLO: Implement failover work for secondary VM
COLO: Implement the process of failover for primary VM
COLO: Introduce state to record failover process
COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
COLO: Synchronize PVM's state to SVM periodically
COLO: Add checkpoint-delay parameter for migrate-set-parameters
COLO: Load VMState into QIOChannelBuffer before restore it
COLO: Send PVM state to secondary side when do checkpoint
COLO: Add a new RunState RUN_STATE_COLO
COLO: Introduce checkpointing protocol
COLO: Establish a new communicating path for COLO
migration: Switch to COLO process after finishing loadvm
migration: Enter into COLO mode after migration if COLO is enabled
COLO: migrate COLO related info to secondary node
migration: Introduce capability 'x-colo' to migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Guest will enter this state when paused to save/restore VM state
under COLO checkpoint.
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We can determine whether or not VM in destination should go into COLO mode
by referring to the info that was migrated.
We skip this section if COLO is not enabled (i.e.
migrate_set_capability colo off), so that, It doesn't break compatibility
with migration no matter whether users configure the --enable-colo/disable-colo
on the source/destination side or not;
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This option does nothing since commit 06ac27f. Deprecate it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This makes the FloppyDrive qdev object actually useful: Now that it has
all properties that don't belong to the controller, you can actually
use '-device floppy' and get a working result.
Command line semantics is consistent with CD-ROM drives: By default you
get a single empty floppy drive. You can override it with -drive and
using the same index, but if you use -drive to add a floppy to a
different index, you get both of them. However, as soon as you use any
'-device floppy', even to a different slot, the default drive is
disabled.
Using '-device floppy' without specifying the unit will choose the first
free slot on the controller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477386868-21826-4-git-send-email-kwolf@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Support target CPUs having a page size which isn't knownn
at compile time. To use this, the CPU implementation should:
* define TARGET_PAGE_BITS_VARY
* not define TARGET_PAGE_BITS
* define TARGET_PAGE_BITS_MIN to the smallest value it
might possibly want for TARGET_PAGE_BITS
* call set_preferred_target_page_bits() in its realize
function to indicate the actual preferred target page
size for the CPU (and report any error from it)
In CONFIG_USER_ONLY, the CPU implementation should continue
to define TARGET_PAGE_BITS appropriately for the guest
OS page size.
Machines which want to take advantage of having the page
size something larger than TARGET_PAGE_BITS_MIN must
set the MachineClass minimum_page_bits field to a value
which they guarantee will be no greater than the preferred
page size for any CPU they create.
Note that changing the target page size by setting
minimum_page_bits is a migration compatibility break
for that machine.
For debugging purposes, attempts to use TARGET_PAGE_SIZE
before it has been finally confirmed will assert.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The output string QEMU with "--version" is very long, it does
not fit into a normal line of a terminal window anymore. By
putting the copyright information on a separate line instead,
the output looks much nicer.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1475661284-30153-1-git-send-email-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When kernel and device tree are specified in the QEMU commandline, then
this device tree may be modified e.g. to add virtio_mmio devices.
With a bootloader e.g. on a flash device these extra devices are not
available.
With this change, the device tree can be specified at the QEMU commandline.
The modified device tree made available to the bootloader with the same
mechanism already supported by device trees fully generated by QEMU.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Message-id: 1473520054-402-1-git-send-email-m.olbrich@pengutronix.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
machine_set_property() replaces '_' by '-' in the property name.
Except it fails to replace an initial '_'. Screwed up in commit
b0ddb8b. Reproducer: "-M pc,__foo_bar=true" produces "Property
'._-foo-bar' not found".
Error messages using a mangled name rather than the name the user
actually wrote is user-hostile, but that's a different topic.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Remove the notion of there being a single global array
of trace events, by introducing a method for registering
groups of events.
The module_call_init() needs to be invoked at the start
of any program that wants to make use of the trace
support. Currently this covers system emulators qemu-nbd,
qemu-img and qemu-io.
[Squashed the following fix from Daniel P. Berrange
<berrange@redhat.com>:
linux-user/bsd-user: initialize trace events subsystem
The bsd-user/linux-user programs make use of the CPU emulation
code and this now requires that the trace events subsystem
is enabled, otherwise it'll crash trying to allocate an empty
trace events bitmap for the CPU object.
--Stefan]
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1475588159-30598-14-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Recently we moved a few options from QemuOptsLists in blockdev.c to
bdrv_runtime_opts in block.c in order to make them accissble using
blockdev-add. However, this has the side effect that these options are
missing from query-command-line-options now, and libvirt consequently
disables the corresponding feature.
This problem was reported as a regression for the 'discard' option,
introduced in commit 818584a4. However, it is more general than that.
Fix it by adding bdrv_runtime_opts to the list of QemuOptsLists that are
returned in query-command-line-options. For the future, libvirt is
advised to use QMP schema introspection for block device options.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
When qemu is being killed, its last words are:
2016-08-31T11:48:15.293587Z qemu-system-x86_64: terminating on signal 15 from pid 11180
That's nice, but what process is 11180? What if I told you we can
do better:
2016-08-31T11:48:15.293587Z qemu-system-x86_64: terminating on signal 15 from pid 11180 (/usr/sbin/libvirtd)
And that's exactly what this patch does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <a2ba85a8e349a0ea9ee06424226197a03cd04bd3.1474987617.git.mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Every time a vCPU is hot-plugged, it will "inherit" its tracing state
from the global state array. That is, if *any* existing vCPU has an
event enabled, new vCPUs will have too.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-id: 147428970768.15111.7664565956870423529.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes bug with stopping and restarting replay
through monitor.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20160926080815.6992.71818.stgit@PASHA-ISP>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a mutex for the CPU list to system emulation, as it will be used to
manage safe work. Abstract manipulation of the CPU list in new functions
cpu_list_add and cpu_list_remove.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Filter-rewriter is a part of COLO project.
It will rewrite some of secondary packet to make
secondary guest's tcp connection established successfully.
In this module we will rewrite tcp packet's ack to the secondary
from primary,and rewrite tcp packet's seq to the primary from
secondary.
usage:
colo secondary:
-object filter-redirector,id=f1,netdev=hn0,queue=tx,indev=red0
-object filter-redirector,id=f2,netdev=hn0,queue=rx,outdev=red1
-object filter-rewriter,id=rew0,netdev=hn0,queue=all
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Update all qemu_uuid users as well, especially get rid of the duplicated
low level g_strdup_printf, sscanf and snprintf calls with QEMU UUID API.
Since qemu_uuid_parse is quite tangled with qemu_uuid, its switching to
QemuUUID is done here too to keep everything in sync and avoid code
churn.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-10-git-send-email-famz@redhat.com>
A number of different places across the code base use CONFIG_UUID. Some
of them are soft dependency, some are not built if libuuid is not
available, some come with dummy fallback, some throws runtime error.
It is hard to maintain, and hard to reason for users.
Since UUID is a simple standard with only a small number of operations,
it is cleaner to have a central support in libqemuutil. This patch adds
qemu_uuid_* functions that all uuid users in the code base can
rely on. Except for qemu_uuid_generate which is new code, all other
functions are just copy from existing fallbacks from other files.
Note that qemu_uuid_parse is moved without updating the function
signature to use QemuUUID, to keep this patch simple.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-Id: <1474432046-325-2-git-send-email-famz@redhat.com>
This commit moves the initialization of the QemuOptsList qemu_iscsi_opts
struct out of block/iscsi.c in order to allow the iscsi module to be
dynamically loaded.
Signed-off-by: Colin Lord <clord@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1471008424-16465-2-git-send-email-clord@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Stop using the so-called 'middle' mode. Instead, use qmp_find_command()
from generated qapi commands registry. Update and fix the documentation
too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160912091913.15831-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
tpm_cleanup is called from main() and also registered with atexit from
tpm_init. The function only visits the tpm_backends linked list, and the
atexit registration happens right after tpm_init fills in the list from
-tpmdev options. Therefore, the direct call is unnecessary. Remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Right after main_loop ends, we release various things but keep iothread
alive. The latter is not prepared to the sudden change of resources.
Specifically, after bdrv_close_all(), virtio-scsi dataplane get a
surprise at the empty BlockBackend:
(gdb) bt
at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:543
at /usr/src/debug/qemu-2.6.0/hw/scsi/virtio-scsi.c:577
It is because the d->conf.blk->root is set to NULL, then
blk_get_aio_context() returns qemu_aio_context, whereas s->ctx is still
pointing to the iothread:
hw/scsi/virtio-scsi.c:543:
if (s->dataplane_started) {
assert(blk_get_aio_context(d->conf.blk) == s->ctx);
}
To fix this, let's stop iothreads before doing bdrv_close_all().
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1473326931-9699-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Initialization of memory backends may take a while when
prealloc=yes is used, depending on their size. Initializing
memory backends before chardevs may delay the creation of monitor
sockets, and trigger timeouts on management software that waits
until the monitor socket is created by QEMU. See, for example,
the bug report at:
https://bugzilla.redhat.com/show_bug.cgi?id=1371211
In addition to that, allocating memory before calling
configure_accelerator() breaks the tcg_enabled() checks at
memory_region_init_*().
This patch fixes those problems by adding "memory-backend-*"
classes to the delayed-initialization list.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently the -version command line argument prints a string ending
with "Copyright (c) 2003-2008 Fabrice Bellard". This is now some
eight years out of date; abstract it out of the several places that
print the string and update it to:
Copyright (c) 2003-2016 Fabrice Bellard and the QEMU Project developers
to reflect the work by all the QEMU Project contributors over the
last decade.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1470309276-5012-1-git-send-email-peter.maydell@linaro.org
Since aa5cb7f5e, the chardevs are being cleaned up when leaving qemu,
before the atexit() handlers. audio_cleanup() may use the monitor to
notify of changes. For compatibility reasons, let's clean up audio
before the monitor so it keeps emitting monitor events.
The audio_atexit() function is made idempotent (so it can be called
multiple times), and renamed to audio_cleanup(). Since coreaudio
backend is using a 'isAtexit' code path, change it to check
audio_is_cleaning_up() instead, so the path is taken during normal
exit.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160801112343.29082-3-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since aa5cb7f5e, the chardevs are being cleaned up when leaving
qemu. However, the monitor has still references to them, which may
lead to crashes when running atexit() and trying to send monitor
events:
#0 0x00007fffdb18f6f5 in __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:54
#1 0x00007fffdb1912fa in __GI_abort () at abort.c:89
#2 0x0000555555c263e7 in error_exit (err=22, msg=0x555555d47980 <__func__.13537> "qemu_mutex_lock") at util/qemu-thread-posix.c:39
#3 0x0000555555c26488 in qemu_mutex_lock (mutex=0x5555567a2420) at util/qemu-thread-posix.c:66
#4 0x00005555558c52db in qemu_chr_fe_write (s=0x5555567a2420, buf=0x55555740dc40 "{\"timestamp\": {\"seconds\": 1470041716, \"microseconds\": 989699}, \"event\": \"SPICE_DISCONNECTED\", \"data\": {\"server\": {\"port\": \"5900\", \"family\": \"ipv4\", \"host\": \"127.0.0.1\"}, \"client\": {\"port\": \"40272\", \"f"..., len=240) at qemu-char.c:280
#5 0x0000555555787cad in monitor_flush_locked (mon=0x5555567bd9e0) at /home/elmarco/src/qemu/monitor.c:311
#6 0x0000555555787e46 in monitor_puts (mon=0x5555567bd9e0, str=0x5555567a44ef "") at /home/elmarco/src/qemu/monitor.c:353
#7 0x00005555557880fe in monitor_json_emitter (mon=0x5555567bd9e0, data=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:401
#8 0x00005555557882d2 in monitor_qapi_event_emit (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0) at /home/elmarco/src/qemu/monitor.c:472
#9 0x000055555578838f in monitor_qapi_event_queue (event=QAPI_EVENT_SPICE_DISCONNECTED, qdict=0x5555567c73a0, errp=0x7fffffffca88) at /home/elmarco/src/qemu/monitor.c:497
#10 0x0000555555c15541 in qapi_event_send_spice_disconnected (server=0x5555571139d0, client=0x5555570d0db0, errp=0x5555566c0428 <error_abort>) at qapi-event.c:1038
#11 0x0000555555b11bc6 in channel_event (event=3, info=0x5555570d6c00) at ui/spice-core.c:248
#12 0x00007fffdcc9983a in adapter_channel_event (event=3, info=0x5555570d6c00) at reds.c:120
#13 0x00007fffdcc99a25 in reds_handle_channel_event (reds=0x5555567a9d60, event=3, info=0x5555570d6c00) at reds.c:324
#14 0x00007fffdcc7d4c4 in main_dispatcher_self_handle_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:175
#15 0x00007fffdcc7d5b1 in main_dispatcher_channel_event (self=0x5555567b28b0, event=3, info=0x5555570d6c00) at main-dispatcher.c:194
#16 0x00007fffdcca7674 in reds_stream_push_channel_event (s=0x5555570d9910, event=3) at reds-stream.c:354
#17 0x00007fffdcca749b in reds_stream_free (s=0x5555570d9910) at reds-stream.c:323
#18 0x00007fffdccb5dad in snd_disconnect_channel (channel=0x5555576a89a0) at sound.c:229
#19 0x00007fffdccb9e57 in snd_detach_common (worker=0x555557739720) at sound.c:1589
#20 0x00007fffdccb9f0e in snd_detach_playback (sin=0x5555569fe3f8) at sound.c:1602
#21 0x00007fffdcca3373 in spice_server_remove_interface (sin=0x5555569fe3f8) at reds.c:3387
#22 0x00005555558ff6e2 in line_out_fini (hw=0x5555569fe370) at audio/spiceaudio.c:152
#23 0x00005555558f909e in audio_atexit () at audio/audio.c:1754
#24 0x00007fffdb1941e8 in __run_exit_handlers (status=0, listp=0x7fffdb5175d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true) at exit.c:82
#25 0x00007fffdb194235 in __GI_exit (status=<optimized out>) at exit.c:104
#26 0x00007fffdb17b738 in __libc_start_main (main=0x5555558d7874 <main>, argc=67, argv=0x7fffffffcf48, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffcf38) at ../csu/libc-start.c:323
Add a monitor_cleanup() functions to remove all the monitors before
cleaning up the chardev. Note that we are "losing" some events that
used to be sent during atexit().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160801112343.29082-2-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When passing '-global driver=host-powerpc64-cpu,property=compat,value=foo'
on the command line, without this patch, we get the following warning per
device (which means many lines if the guests has many cpus):
qemu-system-ppc64: Warning: can't apply global host-powerpc64-cpu.compat=foo:
Invalid compatibility mode "foo"
... and QEMU continues execution, ignoring the property.
With this patch, we get a single line:
qemu-system-ppc64: can't apply global host-powerpc64-cpu.compat=foo:
Invalid compatibility mode "foo"
... and QEMU exits.
The previous behavior is kept for hotplugged devices since we don't want
QEMU to exit when doing device_add.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic
tracing state of events with the 'vcpu' property.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It turns out qemu is calling exit() in various places from various
threads without taking much care of resources state. The atexit()
cleanup handlers cannot easily destroy resources that are in use (by
the same thread or other).
Since c1111a24a3, TCG arm guests run into the following abort() when
running tests, the chardev mutex is locked during the write, so
qemu_mutex_destroy() returns an error:
#0 0x00007fffdbb806f5 in raise () at /lib64/libc.so.6
#1 0x00007fffdbb822fa in abort () at /lib64/libc.so.6
#2 0x00005555557616fe in error_exit (err=<optimized out>, msg=msg@entry=0x555555c38c30 <__func__.14622> "qemu_mutex_destroy")
at /home/drjones/code/qemu/util/qemu-thread-posix.c:39
#3 0x0000555555b0be20 in qemu_mutex_destroy (mutex=mutex@entry=0x5555566aa0e0) at /home/drjones/code/qemu/util/qemu-thread-posix.c:57
#4 0x00005555558aab00 in qemu_chr_free_common (chr=0x5555566aa0e0) at /home/drjones/code/qemu/qemu-char.c:4029
#5 0x00005555558b05f9 in qemu_chr_delete (chr=<optimized out>) at /home/drjones/code/qemu/qemu-char.c:4038
#6 0x00005555558b05f9 in qemu_chr_delete (chr=<optimized out>) at /home/drjones/code/qemu/qemu-char.c:4044
#7 0x00005555558b062c in qemu_chr_cleanup () at /home/drjones/code/qemu/qemu-char.c:4557
#8 0x00007fffdbb851e8 in __run_exit_handlers () at /lib64/libc.so.6
#9 0x00007fffdbb85235 in () at /lib64/libc.so.6
#10 0x00005555558d1b39 in testdev_write (testdev=0x5555566aa0a0) at /home/drjones/code/qemu/backends/testdev.c:71
#11 0x00005555558d1b39 in testdev_write (chr=<optimized out>, buf=0x7fffc343fd9a "", len=0) at /home/drjones/code/qemu/backends/testdev.c:95
#12 0x00005555558adced in qemu_chr_fe_write (s=0x5555566aa0e0, buf=buf@entry=0x7fffc343fd98 "0q", len=len@entry=2) at /home/drjones/code/qemu/qemu-char.c:282
Instead of using a atexit() handler, only run the chardev cleanup as
initially proposed at the end of main(), where there are less chances
(hic) of conflicts or other races.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reported-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20160704153823.16879-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be necessary in the next patch, which stops using atexit for
character devices; without it, vhost-user and the redirector filter
will cause a use-after-free. Relying on the ordering of atexit calls
is also brittle, even now that both the network and chardev
subsystems are using atexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is just a helper to handle the -global options, it
can stay in vl.c like most qemu_opts_foreach() calls.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Skip bus_master_enable region creation on PCI device init
in order to be sure the IOMMU device (if present) would
be created in advance. Add this memory region at machine_done time.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 0544edd88a "vl: smp_parse: cleanups" regressed any -smp
config that left either cores or threads unspecified, and specified
a topology supporting more cpus than the given online cpus. The
correct way to calculate the missing parameter would be to use
maxcpus, but it's too late to change that now. Restore the old
way, which is to calculate it with the online cpus (as is still
done), but then, if the result is zero, just set it to one.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1466526844-29245-1-git-send-email-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The patch also creates trace_opt_parse() helper in trace/control.c to reuse
this code in next patches for qemu-nbd and qemu-io.
The patch also makes trace_init_events() static, as this call is not used
outside the module anymore.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1466174654-30130-4-git-send-email-den@openvz.org
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For management apps it's very useful to know whether the selected
machine type supports cpu hotplug via the new -device approach. Using
the presence of 'query-hotpluggable-cpus' alone is not enough as a
witness.
Add a property to 'MachineInfo' called 'hotpluggable-cpus' that will
report the presence of this feature.
Example of output:
{
"hotpluggable-cpus": false,
"name": "mac99",
"cpu-max": 1
},
{
"hotpluggable-cpus": true,
"name": "pseries-2.7",
"is-default": true,
"cpu-max": 255,
"alias": "pseries"
},
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When qemu_set_log_filename() detects an invalid file name, it reports
an error, closes the log file (if any), and starts logging to stderr
(unless daemonized or nothing is being logged).
This is wrong. Asking for an invalid log file on the command line
should be fatal. Asking for one in the monitor should fail without
messing up an existing logfile.
Fix by converting qemu_set_log_filename() to Error. Pass it
&error_fatal, except for hmp_logfile report errors.
This also permits testing without a subprocess, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1466011636-6112-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
g_error() is not an acceptable way to report errors to the user:
$ qemu-system-x86_64 -dfilter 1000+0
** (process:17187): ERROR **: Failed to parse range in: 1000+0
Trace/breakpoint trap (core dumped)
g_assert() isn't, either:
$ qemu-system-x86_64 -dfilter 1000x+64
**
ERROR:/work/armbru/qemu/util/log.c:180:qemu_set_dfilter_ranges: assertion failed: (e == range_op)
Aborted (core dumped)
Convert qemu_set_dfilter_ranges() to Error. Rework its deeply nested
control flow. Touch up the error messages. Call it with
&error_fatal.
This also permits testing without a subprocess, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1466011636-6112-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We print a few fatal error messages to stdout instead of stderr.
Reproducer:
$ qemu-system-x86_64 -g 1024x768
Option g not supported for this target
$ qemu-system-x86_64 -g 1024x768 >/dev/null
Fix by printing them with error_report(). This also improves the messages.
The above one becomes
qemu-system-x86_64: -g 1024x768: Option not supported for this target
Reported-by: Tobi {github.com/tobimensch}
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1464683498-28779-1-git-send-email-armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
commit f8c75b2486 (vnc: Initialization stubs) removed CONFIG_VNC in vl.c
code. However qemu_find_opts("vnc") is NULL when vnc is configured out.
Crash will happen in qemu_opts_foreach() before stub vnc_init_func() is
called. This patch add it back.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
No functional changes; only some code movement and removal of
dead code (impossible conditions). Also, max_cpus can be
initialized to 1, like smp_cpus, because it's either set by the
user or set to smp_cpus, when smp_cpus is set by the user, or
set to 1, when nothing is set.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <1465580427-13596-2-git-send-email-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU compiles a list of data directories from various sources. When
consuming a QEMU binary it's useful to be able to get this list of
data directories: a primary reason is so you can list what BIOSes or
keymaps ship with this version of QEMU. However without reproducing
the method that QEMU uses internally, it's not possible to get the
list of data directories.
This commit adds a simple '-L help' option that just lists out the
data directories as qemu calculates them:
$ ./x86_64-softmmu/qemu-system-x86_64 -L help
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu
$ ./x86_64-softmmu/qemu-system-x86_64 -L /tmp -L help
/tmp
/home/rjones/d/qemu/pc-bios
/usr/local/share/qemu
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1463416475-11728-2-git-send-email-rjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This wrapper for machine_usb(current_machine) is not necessary,
replace all usages of usb_enabled() with machine_usb().
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1465419025-21519-3-git-send-email-ehabkost@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, if not specified in "./configure", QEMU_PKGVERSION will be
empty. Write a rule in Makefile to generate a value from "git describe"
combined with a possible git tree cleanness suffix, and write into a new
header.
$ cat qemu-version.h
#define QEMU_PKGVERSION "-v2.6.0-557-gd6550e9-dirty"
Include the header in .c files where the macro is referenced. It's not
necessary to include it in all files, otherwise each time the content of
the file changes, all sources have to be recompiled.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1464774261-648-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All handling of defaults (default_* variables) is inside vl.c,
move default_net there too, so we can more easily refactor that
code later.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Switch to adding compat properties incrementaly instead of
completly overwriting compat_props per machine type.
That removes data duplication which we have due to nested
[PC|SPAPR]_COMPAT_* macros.
It also allows to set default device properties from
default foo_machine_options() hook, which will be used
in following patch for putting VMGENID device as
a function if ISA bridge on pc/q35 machines.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[ehabkost: Fixed CCW_COMPAT_* and PC_COMPAT_0_* defines]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There's no need to use qdev_prop_register_global_list() and an
array, if we are registering a single GlobalProperty struct. Use
qdev_prop_register_global() instead.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
All DisplayType values are just UI options that don't affect any
hardware emulation code, except for DT_NOGRAPHIC. Replace
DT_NOGRAPHIC with DT_NONE plus a new "-machine graphics=on|off"
option, so hardware emulation code don't need to use the
display_type variable.
Cc: Michael Walle <michael@walle.cc>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reduces the number of CONFIG_SPICE #ifdefs in vl.c.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This reduces the number of CONFIG_VNC #ifdefs in the vl.c code.
The only user-visible difference is that this will make QEMU
complain about syntax when using "-display vnc" ("VNC requires a
display argument vnc=<display>") even if CONFIG_VNC is disabled.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of reusing DT_SDL for Cocoa, use DT_COCOA to indicate
that a Cocoa display was requested.
configure already ensures CONFIG_COCOA and CONFIG_SDL are never
set at the same time. The only case where DT_SDL is used outside
a #ifdef CONFIG_SDL block is in the no_frame/alt_grab/ctrl_grab
check. That means the only user-visible change is that we will
start printing a warning if the SDL-specific options are used in
Cocoa mode. This is a bugfix, because no_frame/alt_grab/ctrl_grab
are not used by Cocoa code.
Cc: Andreas Färber <andreas.faerber@web.de>
Cc: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of requiring a separate function for each VGA interface,
just enumerate the corresponding class names on struct
VGAInterfaceInfo.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of implementing separate check functions for each vga
interface type, add a table enumerating the possible VGA
interfaces.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of using exit(0), use exit(1) when an unavailable VGA
interface is used in the command-line to indicate it's an error.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
machine->init() was replaced with machine_class->init()
in 958db90cd5.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_opts_foreach() runs its callback with the error location set to
the option's location. Any errors the callback reports use the
option's location automatically.
Commit 90998d5 moved the actual error reporting from "inside"
qemu_opts_foreach() to after it. Here's a typical hunk:
if (qemu_opts_foreach(qemu_find_opts("object"),
- object_create,
- object_create_initial, NULL)) {
+ user_creatable_add_opts_foreach,
+ object_create_initial, &err)) {
+ error_report_err(err);
exit(1);
}
Before, object_create() reports from within qemu_opts_foreach(), using
the option's location. Afterwards, we do it after
qemu_opts_foreach(), using whatever location happens to be current
there. Commonly a "none" location.
This is because Error objects don't have location information.
Problematic.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar
qemu-system-x86_64: Property '.foo' not found
Note no location. This commit restores it:
qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found
Note that the qemu_opts_foreach() bug just fixed could mask the bug
here: if the location it leaves dangling hasn't been clobbered, yet,
it's the correct one.
Reported-by: Eric Blake <eblake@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Paragraph on Error added to commit message]
Entries are inserted in filename order instead of being
appended to the end in case sorting is enabled.
This will avoid any future issues of moving the file creation
around, it doesn't matter what order they are created now,
the will always be in filename order.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Added machine type handling for compatibility. This was
a fairly complex change, this will preserve the order of fw_cfg
for older versions no matter what order the firmware files
actually come in. A list is kept of the correct legacy order
and the entries will be inserted based upon their order in
the list. Except that some entries are ordered (in a specific
area of the list) based upon what order they appear on the
command line. Special handling is added for those entries.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are currently 3 calls to qemu_system_reset() in vl.c. Two of them
are immediately preceded by a cpu_synchronize_all_states9) and the
remaining one should be.
The one which doesn't is the very first reset called directly from main().
Without a cpu_synchronize_all_states(), kvm_vcpu_dirty is false at this
point from the earlier cpu_synchronize_all_post_init(). That's incorrect
because the reset path is quite likely to update the CPU state, and that
updated state should be pushed back to KVM, not overwritten with stale
data pushed to KVM immediately after init.
This patch moves the call to cpu_synchronize_all_states() into
qemu_system_reset() for safety, so it is always called. AFAICT this should
be safe for the handful of callers outside vl.c - these all appear to be in
places where the cpu state is already synchronized so the extra call
will be a no-op.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Filter-redirector is a netfilter plugin.
It gives qemu the ability to redirect net packet.
redirector can redirect filter's net packet to outdev.
and redirect indev's packet to filter.
filter
+
redirector |
+--------------+
| | |
indev +-----------+ +----------> outdev
| | |
+--------------+
|
v
filter
usage:
-netdev user,id=hn0
-chardev socket,id=s0,host=ip_primary,port=X,server,nowait
-chardev socket,id=s1,host=ip_primary,port=Y,server,nowait
-filter-redirector,id=r0,netdev=hn0,queue=tx/rx/all,indev=s0,outdev=s1
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Filter-mirror is a netfilter plugin.
It gives qemu the ability to mirror
packets to a chardev.
usage:
-netdev tap,id=hn0
-chardev socket,id=mirror0,host=ip_primary,port=X,server,nowait
-filter-mirror,id=m0,netdev=hn0,queue=tx/rx/all,outdev=mirror0
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
This patches makes input-linux use -object instead of a new command line
switch. So, instead of the switch ...
-input-linux /dev/input/event$nr
... you must create an object this way:
-object input-linux,id=$name,evdev=/dev/input/event$nr
Bonus is that you can hot-add and hot-remove them via monitor now.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1457681901-30916-1-git-send-email-kraxel@redhat.com
When debugging big programs or system emulation sometimes you want both
the verbosity of cpu,exec et all but don't want to generate lots of logs
for unneeded stuff. This patch adds a new option -dfilter which allows
you to specify interesting address ranges in the form:
-dfilter 0x8000..0x8fff,0xffffffc000080000+0x200,...
Then logging code can use the new qemu_log_in_addr_range() function to
decide if it will output logging information for the given range.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1458052224-9316-7-git-send-email-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only remaining users of machine_init() only call
qemu_add_opts(). Rename machine_init() to opts_init() and move it
closer to the qemu_add_opts() calls on vl.c.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch adds support for reading input events directly from linux
evdev devices and forward them to the guest. Unlike virtio-input-host
which simply passes on all events to the guest without looking at them
this will interpret the events and feed them into the qemu input
subsystem.
Therefore this is limited to what the qemu input subsystem and the
emulated input devices are able to handle. Also there is no support for
absolute coordinates (tablet/touchscreen). So we are talking here about
basic mouse and keyboard support.
The advantage is that it'll work without virtio-input drivers in the
guest, the events are delivered to the usual ps/2 or usb input devices
(depending on what the machine happens to have). And for keyboards
qemu is able to switch the keyboard between guest and host on hotkey.
The hotkey is hard-coded for now (both control keys), initialy the
guest owns the keyboard.
Probably most useful when assigning vga devices with vfio and using a
physical monitor instead of vnc/spice/gtk as guest display.
Usage: Add '-input-linux /dev/input/event<nr>' to the qemu command
line. Note that udev has rules which populate /dev/input/by-{id,path}
with static names, which might be more convinient to use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1457087116-4379-2-git-send-email-kraxel@redhat.com
we should call trace_init_backends() before trace_init_file() for
CONFIG_TRACE_SIMPLE There is no difference for other cases.
This problem was introduced by the commit
commit 41fc57e44e
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Jan 7 16:55:24 2016 +0300
trace: split trace_init_file out of trace_init_backends
'make check' was failed as a result if configured with
--enable-trace-backends=simple
Spotted by Alex Bennée.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1455036545-14870-1-git-send-email-den@openvz.org
CC: Alex Bennée <alex.bennee@linaro.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We set machine_class to the default first, and update it to the real
one later. Any use of machine_class in between is almost certainly
wrong (there are no such uses right now). Set it once and for all
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Set error location so the error_report() calls will show
appropriate command-line argument or config file info.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-5-git-send-email-ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
After looping through all command-line arguments, error location
info becomes obsolete, and any function calling error_report()
will print misleading information. This breaks error reporting
for some option handling, like:
$ qemu-system-x86_64 -icount rr=x -vnc :0
qemu-system-x86_64: -vnc :0: Invalid icount rr option: x
$ qemu-system-x86_64 -m size= -vnc :0
qemu-system-x86_64: -vnc :0: missing 'size' option value
Fix this by resetting location info as soon as we exit the
command-line handling loop.
With this, replay_configure() and set_memory_options() won't
print any location info yet, but at least they won't print
incorrect information.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-3-git-send-email-ehabkost@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
["Do not insert code here" comment added to prevent regressions]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit e1ce0c3cb (vl.c: fix regression when reading machine type
from config file) fixed the error message when the machine type
was supplied inside the config file. However now the option name
is not displayed correctly if the error happens when the machine
is specified at command line.
Running
./x86_64-softmmu/qemu-system-x86_64 -M q35-1.5 -redir tcp:8022::22
will result in the error message:
qemu-system-x86_64: -redir tcp:8022::22: unsupported machine type
Use -machine help to list supported machines
Fixed it by restoring the error location and also extracted the code
dealing with machine options into a separate function.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The QMP monitor code has two helper methods object_add
and qmp_object_del that are called from several places
in the code (QMP, HMP and main emulator startup).
The HMP and main emulator startup code also share
further logic that extracts the qom-type & id
values from a qdict.
We soon need to use this logic from qemu-img, qemu-io
and qemu-nbd too, but don't want those to depend on
the monitor, nor do we want to duplicate the code.
To avoid this, move some code out of qmp.c and hmp.c
adding new methods to qom/object_interfaces.c
- user_creatable_add - takes a QDict holding a full
object definition & instantiates it
- user_creatable_add_type - takes an ID, type name,
and QDict holding object properties & instantiates
it
- user_creatable_add_opts - takes a QemuOpts holding
a full object definition & instantiates it
- user_creatable_add_opts_foreach - variant on
user_creatable_add_opts which can be directly used
in conjunction with qemu_opts_foreach.
- user_creatable_del - takes an ID and deletes the
corresponding object
The existing code is updated to use these new methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reproducer is simply to migrate a virtual machine that was started with -S,
or that was already migrated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch implements proposal from Paolo to handle system reset when
the guest is not running.
"After a reset, main_loop_should_exit should actually transition
to VM_STATE_PRELAUNCH (*not* RUN_STATE_PAUSED) for *all* states except
RUN_STATE_INMIGRATE, RUN_STATE_SAVE_VM (which I think cannot happen
there) and (of course) RUN_STATE_RUNNING."
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1455369986-20353-1-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
visit_start_struct() and visit_type_enum() had a 'kind' argument
that was usually set to either the stringized version of the
corresponding qapi type name, or to NULL (although some clients
didn't even get that right). But nothing ever used the argument.
It's even hard to argue that it would be useful in a debugger,
as a stack backtrace also tells which type is being visited.
Therefore, drop the 'kind' argument as dead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com>
[Harmless rebase mistake cleaned up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Guarantee that visit_end_struct() is called if
visit_start_struct() succeeded. This matches the behavior of
most other uses of visitors, and is a step towards the possibility
of a future patch that adds and enforces some tighter semantics to
the visitor interface (namely, cleanup of the visitor would no
longer have to mop up as many leftovers from an aborted partial
visit).
The change to code here matches the flow of hmp.c:hmp_object_add();
a later patch will then further simplify the cleanup logic of both
places by refactoring visit_end_struct() to not require a second
local error object.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-9-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Cache the visitor in a local variable instead of repeatedly
calling the accessor.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The qapi visitor contract allows us to visit a virtual structure,
where we don't have any corresponding qapi struct. Most such uses
pass NULL for @obj; but these two callers were passing a dummy
pointer, which then gets allocated to heap memory but then
immediately freed without use. Clean this up to suppress unwanted
allocation, like we do elsewhere.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Done with the Coccinelle semantic patch from commit 007b065, plus
manual clean up of dead variables.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1452783732-6581-1-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
Version: GnuPG v1
iQEcBAABAgAGBQJWswswAAoJEO8Ells5jWIRmuAIAKfexolRpauVFoMt2w69Yrk4
0XhaAuSaazsfU06azXKjrchBUgXbw4Y6lw3tkTos4lnd8m1ovfAzSTS4q28rZ+Tf
u5M06Fi13oyhEViGS4gt6gTwmYPTx2FTBDMCL1OZvka7GPbVsweQn0IS18j1Q2xL
ps2kruNTad7mUa2EypuBugm3woL8kGupLUX63aWKmnvqobwFDNTKJLWiFn5eXlbg
Zq7LxmC4R3A5K9rD8wN16ScaK3RH2x83DXaRoddtSIRwdldxG9ZCv2oFKPZrr6WA
HsJIjurMTXhaRxNL3PsGMd/MbT7gmNF5muq8kZnkORmGxfMvi3RUuBdyhrq1I0w=
=2Uz/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 04 Feb 2016 08:26:24 GMT using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
net/filter: Fix the output information for command 'info network'
net: always walk through filters in reverse if traffic is egress
net: netmap: use nm_open() to open netmap ports
e1000: eliminate infinite loops on out-of-bounds transfer start
slirp: Adding family argument to tcp_fconnect()
slirp: Make udp_attach IPv6 compatible
slirp: Add sockaddr_equal, make solookup family-agnostic
slirp: Factorizing and cleaning solookup()
slirp: Factorizing address translation
slirp: Make Socket structure IPv6 compatible
slirp: Adding address family switch for produced frames
slirp: Generalizing and neutralizing ARP code
slirp: goto bad in udp_input if sosendto fails
cadence_gem: fix buffer overflow
net: cadence_gem: check packet size in gem_recieve
qemu-doc: Do not promote deprecated -smb and -redir options
net/slirp: Tell the users when they are using deprecated options
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We don't want to support the legacy -tftp, -bootp, -smb and
-net channel options forever. So let's start telling the users
that they are deprecated and what option should be used instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Allow enabling events without going through a file, for example:
qemu-system-x86_64 -trace bdrv_aio_writev -trace bdrv_aio_readv
or with globbing too:
qemu-system-x86_64 -trace 'bdrv_aio_*'
if an appropriate backend is enabled (simple, stderr, ftrace).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-6-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
original idea to split calling locations was to spawn tracing thread
in the final child process according to
commit 8a745f2a92
Author: Michael Mueller
Date: Mon Sep 23 16:36:54 2013 +0200
os_daemonize is now on top of both locations. Drop unneeded ifs.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1452174932-28657-5-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is cleaner, and improves error reporting with -daemonize.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-4-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is cleaner and has two advantages. First, it improves error
reporting with -daemonize. Second, multiple "-trace events" options
now cumulate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-3-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently the ObjectProperty iterator API works as follows:
ObjectPropertyIterator *iter;
iter = object_property_iter_init(obj);
while ((prop = object_property_iter_next(iter))) {
...
}
object_property_iter_free(iter);
This has the benefit that the ObjectPropertyIterator struct
can be opaque, but has the downside that callers need to
explicitly call a free function. It is also not in keeping
with iterator style used elsewhere in QEMU/GLib2.
This patch changes the API to use stack allocation instead:
ObjectPropertyIterator iter;
object_property_iter_init(&iter, obj);
while ((prop = object_property_iter_next(&iter))) {
...
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[AF: Fused ObjectPropertyIterator struct with typedef]
Signed-off-by: Andreas Färber <afaerber@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OVhB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2016-01-13' into staging
Error reporting patches for 2016-01-13
# gpg: Signature made Wed 13 Jan 2016 14:21:48 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2016-01-13: (41 commits)
checkpatch: Detect newlines in error_report and other error functions
error: Consistently name Error * objects err, and not errp
s390/sclp: Simplify control flow in sclp_realize()
hw/s390x: Rename local variables Error *l_err to just err
error: Clean up errors with embedded newlines (again)
vhdx: Fix "log that needs to be replayed" error message
pci-assign: Clean up "Failed to assign" error messages
vmdk: Clean up "Invalid extent lines" error message
vmdk: Clean up control flow in vmdk_parse_extents() a bit
error: Strip trailing '\n' from error string arguments (again)
qemu-io qemu-nbd: Use error_report() etc. instead of fprintf()
migration: Use error_reportf_err() instead of monitor_printf()
spapr: Use error_reportf_err()
error: Use error_prepend() where it makes obvious sense
error: Use error_reportf_err() where it makes obvious sense
error: Don't decorate original error message when adding to it
error: New error_prepend(), error_reportf_err()
test-throttle: Simplify qemu_init_main_loop() error handling
qemu-nbd: Clean up "Failed to load snapshot" error message
block: Clean up "Could not create temporary overlay" error message
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Same Coccinelle semantic patch as in commit 565f65d.
We now use the original error whole instead of just its message
obtained with error_get_pretty(). This avoids suppressing its hint
(see commit 50b7b00), but I don't think the errors touched in this
commit can come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-3-git-send-email-armbru@redhat.com>
Done with this Coccinelle semantic patch:
@@
type T;
identifier FUN, RET;
expression list ARGS;
expression ERR, EC;
@@
(
- T RET = FUN(ARGS, &ERR);
+ T RET = FUN(ARGS, &error_fatal);
|
- RET = FUN(ARGS, &ERR);
+ RET = FUN(ARGS, &error_fatal);
|
- FUN(ARGS, &ERR);
+ FUN(ARGS, &error_fatal);
)
- if (ERR != NULL) {
- error_report_err(ERR);
- exit(EC);
- }
This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.
It leaves dead Error * variables behind, cleaned up manually.
Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
The s390-virtio machine has been removed; remove the associated devices
as well.
hw/s390x/s390-virtio-bus.c and hw/s390x/s390-virtio-bus.h
have been deleted and removed from hw/s390x/Makefile.objs
virtio-size has no more meaning for the modern machine
and has been removed from helper.c and cpu.h
virtio-serial-s390 belonging to the old machine is
being removed from vl.c
Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This reverts commit 1c7ba94a18.
That commit changed QEMU initialization order from
- object-initial, chardev, qtest, object-late
to
- chardev, qtest, object-initial, object-late
This breaks chardev setups which need to rely on objects
having been created. For example, when chardevs use TLS
encryption in the future, they need to have tls credential
objects created first.
This revert, restores the ordering introduced in
commit f08f9271bf
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed May 13 17:14:04 2015 +0100
vl: Create (most) objects before creating chardev backends
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1448448749-1332-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/IfF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
# gpg: Signature made Thu 19 Nov 2015 14:32:16 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
MAINTAINERS: Add check-qom-{interface,proplist} to QOM
qom: Clean up assertions to display values on failure
qom: Replace object property list with GHashTable
qom: Add a test case for complex property finalization
net: Convert net filter code to use object property iterators
ppc: Convert spapr code to use object property iterators
vl: Convert machine help code to use object property iterators
qmp: Convert QMP code to use object property iterators
qom: Introduce ObjectPropertyIterator struct for iteration
qdev: Change Property::offset field to ptrdiff_t type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
vhost-user-test prints a warning. A test should not need to run on
hugetlbfs, let's silence the warning under qtest. The
condition can't check on qtest_enabled() since vhost-user-test actually
doesn't use qtest accel. However, qtest_driver() can be used, if
qtest_init() is called early enough. For that reason, move chardev and
qtest initialization early.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stop directly accessing the Object::properties field data
structure and instead use the formal object property iterator
APIs. This insulates the code from future data structure
changes in the Object struct.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The HOST_PAGE_ALIGN macros don't work until the page size variables
have been set up; later in postcopy I use those macros in the RAM
code, and it can be triggered using -object.
Fix this by initialising page_size_init() earlier - it's currently
initialised inside the accelerators, move it up into vl.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWPHM6AAoJEL/70l94x66DK5YIAJTNthYWL8eNhQ1iek6CLlV+
etVXm3JDmkV0zOfYVHLBb44VLZ6I1ocas+57F/kmz7SKpMLiI6bMXRxhTSkiO4D+
3N36cWQf3fq+P0DmxuikMlYGz8V6QQ5PQE2xJKV0ZIWAkiqInxilkN3qt81sNR+A
A9Ohom3sc0eGHyYJcVDK4krbnNSAZjIB2yMWperw61x+GYAhxjA02HPUgB32KK6q
KrdnKmnRu9Cw6y4wTCbbDITJztPexZYsX2DOJh30wC0eNcE+MZ7J2im8Frpxe+Ml
C8MUuvSqLOyeu9tUfrXGzd6kMtEKrmU+fh2nNbxJbtfowDjkW2jcIEgC0UjkGE4=
=BF1q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-replay' into staging
So here it is, let's see what happens.
# gpg: Signature made Fri 06 Nov 2015 09:30:34 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream-replay:
replay: recording of the user input
replay: command line options
replay: replay blockers for devices
replay: initialization and deinitialization
replay: ptimer
bottom halves: introduce bh call function
replay: checkpoints
icount: improve counting for record/replay
replay: shutdown event
replay: recording and replaying clock ticks
replay: asynchronous events infrastructure
replay: interrupts and exceptions
cpu: replay instructions sequence
cpu-exec: allow temporary disabling icount
replay: introduce icount event
replay: introduce mutex to protect the replay log
replay: internal functions for replay log
replay: global variables and function stubs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces command line options for enabling recording or replaying
virtual machine behavior. These options are added to icount command line
parameter. They include 'rr' which switches between record and replay
and 'rrfile' for specifying the filename for replay log.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162518.8676.70792.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Some devices are not supported by record/replay subsystem.
This patch introduces replay blocker which denies starting record/replay
if such devices are included into the configuration.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162512.8676.11367.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch introduces the functions for enabling the record/replay and for
freeing the resources when simulator closes.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162507.8676.90232.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch introduces checkpoints that synchronize cpu thread and iothread.
When checkpoint is met in the code all asynchronous events from the queue
are executed.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162444.8676.52916.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This patch records and replays simulator shutdown event.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150917162433.8676.32262.stgit@PASHA-ISP.def.inno>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
This makes the purpose of the function clearer: it is not about the
version of QEMU that's running, but the version string exposed in the
emulated hardware.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446233769-7892-3-git-send-email-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify warnings about deprecated options by rewriting them as
"warning: ignoring deprecated option".
Reword -no-kvm-pit-reinjection deprecation warning.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-10-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-11-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Several small improvements:
* Use "cannot" instead of "can not"
* Use 'quotes' instead of `quotes'
* Change "fail to parse" error message to "failed to parse"
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-6-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-7-git-send-email-ehabkost@redhat.com>
Message-Id: <1446217682-24421-9-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-8-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-5-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Except for removing periods and exclamation points, no other changes
were made to the error messages (yet).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-4-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Straightforward replacement, except for qemu_kill_report(), which
printed a common part of its error message first, then the applicable
special part. Print each complete message with a single
error_report() instead.
Multi-line messages were replaced by error_report() followed by
error_printf().
The following changes were made to the error messages:
* The "invalid date format" message was reworded to better fit
the new error_report()+error_printf() pattern.
* On the remaining messages, only the trailing newlines, "qemu:" and
"error:" message prefixes were removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1446217682-24421-2-git-send-email-ehabkost@redhat.com>
[Squashed in
Message-Id: <1446217682-24421-3-git-send-email-ehabkost@redhat.com>
and updated commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the net-filter infrastructure to provide the dumping
functions for netdev devices, too.
Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJWG2e/AAoJEO8Ells5jWIRcYcH/2D11W8cToCBjGDuw/u9K1ht
S3oGyFasOEq3lm3+a3zQE+vDw0RDkjLEMhcTVwNskJQl6k6Ts5JleTZ6wffvUKPM
UCozgPOCt1ZAdGskwdbByc+NhaVBHIiEsmlbDKqP22CENdDx6GWjcFW4brA4tQJQ
AW36EH77j/M+7/KiSukcUfIexILUZJRfN+ICJVyNTpGsqUNJtFqiVPBMPyJhKCEq
3pr3yJ2lf78SAEF5kBeBc9r/PDWUhtqExBsrK0L8Ey1FdrCy8ldqDPGecT4TsxNv
W/KX5AqhKSsMI8DQKdbv/IKaUdjYWNjTRQ2Qjm8Vt0hcW0PhxR0NYi6bV4yjDNM=
=f26Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 12 Oct 2015 08:56:47 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tests: add test cases for netfilter object
netfilter: add a netbuffer filter
net/queue: export qemu_net_queue_append_iov
netfilter: print filter info associate with the netdev
netfilter: add an API to pass the packet to next filter
net/queue: introduce NetQueueDeliverFunc
net: merge qemu_deliver_packet and qemu_deliver_packet_iov
netfilter: hook packets before net queue send
init/cleanup of netfilter object
vl.c: init delayed object after net_init_clients
vmxnet3: Add support for VMXNET3_CMD_GET_ADAPTIVE_RING_INFO command
e1000: use alias for default model
vmxnet3: Support reading IMR registers on bar0
net/vmxnet3: Refine l2 header validation
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This filter is to buffer/release packets. Can be used when using
MicroCheckpointing or other Remus like VM FT solutions.
You can also use it to crudely simulate network delay. Doesn't
actually delay individual packets, but batches them together, which is
a delay of sorts.
Usage:
-netdev tap,id=bn0
-object filter-buffer,id=f0,netdev=bn0,queue=rx,interval=1000
NOTE:
Interval is in microseconds, it can't be omitted currently, and can't be 0.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Init delayed object after net_init_clients, because netfilters need
to be initialized after net clients initialized.
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The malloc vtable is not supported anymore in glib, because it broke
when constructors called g_malloc. Remove tracing of g_malloc,
g_realloc and g_free calls.
Note that, for systemtap users, glib also provides tracepoints
glib.mem_alloc, glib.mem_free, glib.mem_realloc, glib.slice_alloc
and glib.slice_free.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1442417924-25831-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The code in smp_parse already checks the topology information for
sockets * cores * threads < cpus and bails out with an error in
that case. However, it is still possible to supply a bad configuration
the other way round, e.g. with:
qemu-system-xxx -smp 4,sockets=1,cores=4,threads=2
QEMU then still starts the guest, with topology configuration that
is rather incomprehensible and likely not what the user wanted.
So let's add another check to refuse such wrong configurations.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
On destination, we move from INMIGRATE to FINISH_MIGRATE. Add that to
the list of allowed states.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
The struct is not used anymore and can be eliminated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Now all TYPE_MACHINE subclasses use MACHINE_TYPE_NAME to generate the
class name. So instead of requiring each subclass to set
MachineClass::name manually, we can now set it automatically at the
TYPE_MACHINE class_base_init() function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
[AF/ehabkost: Updated for s390-ccw machines]
[AF: Cleanup of intermediate virt and vexpress name handling]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The macro will be useful to ensure the machine class names follow the
right format to make machine class lookup by class name work correctly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
CPUState::crash_occurred field inside CPUState marks
that guest crash occurred. This value is added into
cpu common migration subsection.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-12-git-send-email-den@openvz.org>
[Document the new field. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There are pieces of guest panic handling code
that can be shared in one generic function.
These code replaced by call qemu_system_guest_panicked().
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-10-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This regression was caused by commit 70b94331.
CC vl.o
vl.c: In function ‘select_display’:
vl.c:2064:12: error: unused variable ‘err’ [-Werror=unused-variable]
Error *err = NULL;
^
Reported-by: Claudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <1437587610-26433-1-git-send-email-sw@weilnetz.de>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVnQWdAAoJEL/70l94x66D6OgIAKJlzQfmy5w7Q9WD4vCMhD76
JrpLSsn7Gx/Bws0Nu9nLQlqun5z4hiUxyG2kP/WqD9+tV3cpSMSyrG6ImVdqKnQ5
+Z8WJZuREkQv0aqDUjQVST+eIDZuh2LWJXAjhgsCXUHY77eWb/7WmKT79xJOa+5C
5xB1qxudqX5IsTvpiKKPbmUGYkAcvRX1dUSaFwRIMO0UyKn59B9WfM9a5slIbLW7
XfI8+wEJshTVLuQkkTfdidWQc5M5DwlmO7ESUNR/BRPCPFeyjcDqgQY5pBM5XVo9
C+S0R3zIt3Ew0fhCtLRyjlIT0bGfwjbU5HRiHcyldBKhNUZZjSUoOWJnYRHXUDY=
=H8wA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Bugfixes and Daniel Berrange's crypto library.
# gpg: Signature made Wed Jul 8 12:12:29 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
ossaudio: fix memory leak
ui: convert VNC to use generic cipher API
block: convert qcow/qcow2 to use generic cipher API
ui: convert VNC websockets to use crypto APIs
block: convert quorum blockdrv to use crypto APIs
crypto: add a nettle cipher implementation
crypto: add a gcrypt cipher implementation
crypto: introduce generic cipher API & built-in implementation
crypto: move built-in D3DES implementation into crypto/
crypto: move built-in AES implementation into crypto/
crypto: introduce new module for computing hash digests
vl: move rom_load_all after machine init done
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes a new section that for now just stores the current qemu state.
Right now, there are only one way to control what is the state of the
target after migration.
- If you run the target qemu with -S, it would start stopped.
- If you run the target qemu without -S, it would run just after migration finishes.
The problem here is what happens if we start the target without -S and
there happens one error during migration that puts current state as
-EIO. Migration would ends (notice that the error happend doing block
IO, network IO, i.e. nothing related with migration), and when
migration finish, we would just "continue" running on destination,
probably hanging the guest/corruption data, whatever.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Next commit would allow to move from incoming migration to error happening on source.
Should we add more states to this transition? Luiz?
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This allows us to store the current state to send it through migration.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce a new crypto/ directory that will (eventually) contain
all the cryptographic related code. This initially defines a
wrapper for initializing gnutls and for computing hashes with
gnutls. The former ensures that gnutls is guaranteed to be
initialized exactly once in QEMU regardless of CLI args. The
block quorum code currently fails to initialize gnutls so it
only works by luck, if VNC server TLS is not requested. The
hash APIs avoids the need to litter the rest of the code with
preprocessor checks and simplifies callers by allocating the
correct amount of memory for the requested hash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1435770638-25715-2-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On ARM, commit ac9d32e396 postponed the
memory preparation for boot until the machine init done notifier. This
has for consequence to insert ROM at machine init done time.
However the rom_load_all function stayed called before the ROM are
inserted. As a consequence the rom_load_all function does not do
everything it is expected to do, on ARM.
It currently registers the ROM reset notifier but does not iterate through
the registered ROM list. the isrom field is not set properly. This latter
is used to report info in the monitor and also to decide whether the
rom->data can be freed on ROM reset notifier.
To fix that regression the patch moves the rom_load_all call after
machine init done. We also take the opportunity to rename the rom_load_all
function into rom_check_and_resgister_reset() and integrate the
rom_load_done in it.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1434470874-22573-1-git-send-email-eric.auger@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Results in nicer error messages. Before this patch:
Invalid GTK option string: gtk,lirum-larum
After:
qemu-system-x86_64: -display gtk,lirum-larum: Invalid GTK option string
Of course, the thing ought to use QemuOpts instead of parsing by hand.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report() is a transitional interface to help with converting
existing monitor commands to QMP. It should not be used elsewhere.
Replace by error_report() in initial startup helpers parse_sandbox()
and parse_add_fd().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere.
The only remaining user in qemu-option.c is qemu_opts_parse(). Is it
used in QMP context? If not, we can simply replace
qerror_report_err() by error_report_err().
The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are
clearly not in QMP context.
The uses in vl.c aren't either, because the only QMP command handlers
there are qmp_query_status() and qmp_query_machines(), and they don't
call it.
Remaining uses:
* drive_def(): Command line -drive and such, HMP drive_add and pci_add
* hmp_chardev_add(): HMP chardev-add
* monitor_parse_command(): HMP core
* tmp_config_parse(): Command line -tpmdev
* net_host_device_add(): HMP host_net_add
* net_client_parse(): Command line -net and -netdev
* qemu_global_option(): Command line -global
* vnc_parse_func(): Command line -display, -vnc, default display, HMP
change, QMP change. Bummer.
* qemu_pci_hot_add_nic(): HMP pci_add
* usb_net_init(): Command line -usbdevice, HMP usb_add
Propagate errors through qemu_opts_parse(). Create a convenience
function qemu_opts_parse_noisily() that passes errors to
error_report_err(). Switch all non-QMP users outside tests to it.
That leaves vnc_parse_func(). Propagate errors through it. Since I'm
touching it anyway, rename it to vnc_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Also polish an error message while I'm touching the line anyway,
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=bIg2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Changes to name string ownership for alias properties
* Improvements around enum properties
* Cleanups around -object handling
* New helper functions
* Cleanups of qdev init helper functions
* Add path argument to qom-tree script
* QTest cleanup to use new qtest_add_data_func() consistently
# gpg: Signature made Fri Jun 19 18:14:38 2015 BST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
qdev: Un-deprecate qdev_init_nofail()
qdev: Deprecated qdev_init() is finally unused, drop
qom: Don't pass string table to object_get_enum() function
qom: Add an object_property_add_enum() helper function
qom: Make enum string tables const-correct
qom: Add object_new_with_props() / object_new_withpropv() helpers
qom: Add helper function for getting user objects root
vl: Create (most) objects before creating chardev backends
doc: Document user creatable object types in help text
backends: Fix typename of 'policy' enum property in hostmem obj
scripts: Add support for path as argument of qom-tree
tests: Use qtest_add_data_func() consistently
qdev: Free property names after registering gpio aliases
qom: strdup() target property name on object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Avoid long 100% CPU wait after restarting guests that use the periodic timer
* Fixes for access clamping (WinXP, MIPS)
* wixl/.msi support for qemu-ga on Windows
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVg+9dAAoJEL/70l94x66Df/MH/jWRacMKQAGJwmlXS4NsTCdh
HF85290kWn+P9NH1e7TBnhPrgBdDTJmxK3fAMHKZwXs3vDs2lC1eBJyoGZw7lVxQ
uihlnQjSSaRd5R6IpXNgr0wFrS8T3pN+FzOkStYqEHYINa1uBa6CBXYzOzGTFgd+
OOrU0O15NAVsxU29jBW4HPqX4S0zT4KbpvIESGWPgGbLyBhgLAuMLlvbWwNkFZt0
3bDtel9QQnL0Sm4wl7IWCqePEIkCkbF4tRIwCn34Bq/SuE0RgESiHGKUJ638oSuj
/ga1StztyHZhnk+SSAcnma//Holauh+2nBm+8sGyyFFeUbEJsPG70ODCrfxbQf0=
=AXLV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* i8254 security fix
* Avoid long 100% CPU wait after restarting guests that use the periodic timer
* Fixes for access clamping (WinXP, MIPS)
* wixl/.msi support for qemu-ga on Windows
# gpg: Signature made Fri Jun 19 11:30:53 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
exec: clamp accesses against the MemoryRegionSection
exec: do not clamp accesses to MMIO regions
mc146818rtc: Reset the periodic timer on load
qemu-timer: Call clock reset notifiers on forward jumps
tests: virtio-scsi: Add test for unaligned WRITE SAME
tests: virtio-scsi: Move start/stop to individual test functions
libqos: Complete virtio device ID definition list
libqos: Allow calling guest_free on NULL pointer
tests: Link libqos virtio object to virtio-scsi-test
i8254: fix out-of-bounds memory access in pit_ioport_read()
qemu-ga: Building Windows MSI installation with configure/Makefile
qemu-ga: Introduce Windows MSI script
qemu-ga: debug printouts to help troubleshoot installation
qemu-ga: adding vss-[un]install options
qemu-log: Open file for logging when specified
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some types of object must be created before chardevs, other types of
object must be created after chardevs. As such there is no option but
to create objects in two phases.
This takes the decision to create as many object types as possible
right away before anyother backends are created, and only delay
creation of those few which have an explicit dependency on the
chardevs. Hopefully the set which need delaying will remain small
over time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add new "arg" sub-argument to the --semihosting-config allowing the user
to pass multiple input arguments separately. It is required for example
by UHI semihosting to construct argc and argv.
Also, update ARM semihosting to support new option (at the moment it is
the only target which cares about arguments).
If the semihosting is enabled and no semihosting args have been specified,
then fall back to -kernel/-append. The -append string is split on whitespace
before initializing semihosting.argv[1..n]; this is different from what
QEMU MIPS machines' pseudo-bootloaders do (i.e. argv[1] contains the whole
-append), but is more intuitive from UHI user's point of view and Linux
kernel just does not care as it concatenates argv[1..n] into single cmdline
string anyway.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Message-id: 1434643256-16858-3-git-send-email-leon.alrae@imgtec.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove semihosting_enabled and semihosting_target and replace them with
SemihostingConfig structure containing equivalent fields. The structure
is defined in vl.c where it is actually set.
Also introduce separate header file include/exec/semihost.h allowing to
access semihosting config related stuff from target specific semihosting
code.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu-log defaults to stderr when there is no '-D' option mentioned on command
line. When '-D' option is specified, we also need to specify '-d' option for it
to use the specified logfile. When using monitor to enable logging this is
troublesome since there will be no '-d' option because of which monitor dumps
the logs to stderr.
Fix this by opening the log file when '-D' is specified on the command line.
Also fix an ancient comment which does not hold true since changing location and
log level has now been streamlined.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1433946024-18439-1-git-send-email-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some convinience fluff: Add support for '-vga virtio', also add
virtio-vga to the list of vga cards so '-device virtio-vga' will
turn off the default vga.
Written by Dave Airlie and Gerd Hoffmann.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allow user supplied files to be inserted into the fw_cfg
device before starting the guest. Since fw_cfg_add_file()
already disallows duplicate fw_cfg file names, qemu will
exit with an error message if the user supplies multiple
blobs with the same fw_cfg file name, or if a blob name
collides with a fw_cfg name programmatically added from
within the QEMU source code. A warning message will be
printed if the fw_cfg item name does not begin with the
prefix "opt/", which is recommended for external, user
provided blobs.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the argument is non-zero, qemu_opt_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the callback's
value from the last iteration.
The two callers that pass zero could just as well pass one:
* qemu_spice_init()'s callback add_channel() either returns zero or
exit()s.
* config_write_opts()'s callback config_write_opt() always returns
zero.
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Retain the function value for now, to permit selective conversion of
its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
When the argument is non-zero, qemu_opts_foreach() stops on callback
returning non-zero, and returns that value.
When the argument is zero, it doesn't stop, and returns the bit-wise
inclusive or of all the return values. Funky :)
The callers that pass zero could just as well pass one, because their
callbacks can't return anything but zero:
* qemu_add_globals()'s callback qdev_add_one_global()
* qemu_config_write()'s callback config_write_opts()
* main()'s callbacks default_driver_check(), drive_enable_snapshot(),
vnc_init_func()
Drop the parameter, and always stop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
