This workaround is no longer required with the current code and so can be
removed.
[Note: whilst MacOS itself can boot correctly, removing this hack prevents
a bootable EMILE CDROM from working. This is caused by a separate bug which
will be fixed by a subsequent patch]
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-17-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Following on from the recent changes to when the TC is updated, it is now
possible to remove another set of manual STAT_TC updates so that its state
is now managed within esp_set_tc().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-16-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is used to set the current SCSI bus phase in the ESP_RSTAT register
without affecting any of flag bits.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-15-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This is to ensure that STAT_TC is triggered during the right parts of the
transfer when it is controlled exclusively by the TC.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-14-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Instead accumulate in the real FIFO as done in real hardware, and then transfer
to cmdfifo when we're ready to process the MESSAGE OUT and COMMAND phase data.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The do_cmd variable is only set for the MESSAGE OUT and COMMAND phases i.e.
those which involve transfers from the host to the SCSI bus, and so the unused
case can be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The ultimate aim is to for esp_do_dma() behaviour to be determined by the SCSI
bus phase, in which case it is necessary to have separate to/from device paths.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Invert the logic so that the end of DMA transfer check becomes one that checks
for TC == 0 in the from device path in do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This helps to simplify esp_reg_write() and potentially allows for a 2-level
deep FIFO to be implemented in future.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This should be exclusively managed by esp_set_tc() rather than being manually
set in multiple places. Start by removing the occurrences exclusive to PDMA
and command completion which are those that can be currently removed without
affecting any test images.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This flag is set once the transfer counter counts down to zero.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Since the DREQ value depends upon the result of the selection process, add a
workaround to each esp_select() to manually assert DREQ durring the MESSAGE OUT
and COMMAND phases.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The FIFO contents should not be affected by performing SCSI target selection.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The fifo8_pop_buf() function returns a pointer to the FIFO buffer up to the
specified length. Since the FIFO buffer is modelled as an array then once
the FIFO wraps around, only the continuous portion of the buffer can be
returned.
In future the use of continuous and unaligned accesses will advance the
internal FIFO head pointer, so modify esp_fifo_pop_buf() to ensure that
any wraparound content is also returned up to the requested length.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Since get_cmd() can be called multiple times during a mixed FIFO/DMA request,
move the existing request cancel check into esp_select() which always occurs
at the start of new SCSI request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
The FIFO contents should not be affected if the target selection fails.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Helge Deller <deller@gmx.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240112125420.514425-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
As of commit 38738f7dbb ("virtio-scsi:
don't waste CPU polling the event virtqueue"), we only attach an io_read
notifier for the virtio-scsi event virtqueue instead, and no polling
notifiers. During operation, the event virtqueue is typically
non-empty, but none of the buffers are intended to be used immediately.
Instead, they only get used when certain events occur. Therefore, it
makes no sense to continuously poll it when non-empty, because it is
supposed to be and stay non-empty.
We do this by using virtio_queue_aio_attach_host_notifier_no_poll()
instead of virtio_queue_aio_attach_host_notifier() for the event
virtqueue.
Commit 766aa2de0f ("virtio-scsi: implement
BlockDevOps->drained_begin()") however has virtio_scsi_drained_end() use
virtio_queue_aio_attach_host_notifier() for all virtqueues, including
the event virtqueue. This can lead to it being polled again, undoing
the benefit of commit 38738f7dbb.
Fix it by using virtio_queue_aio_attach_host_notifier_no_poll() for the
event virtqueue.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Fixes: 766aa2de0f
("virtio-scsi: implement BlockDevOps->drained_begin()")
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-2-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.
This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.
Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
scsi_device_for_each_req_async() currently does not provide any way to
be awaited. One of its callers is scsi_device_purge_requests(), which
therefore currently does not guarantee that all requests are fully
settled when it returns.
We want all requests to be settled, because scsi_device_purge_requests()
is called through the unrealize path, including the one invoked by
virtio_scsi_hotunplug() through qdev_simple_device_unplug_cb(), which
most likely assumes that all SCSI requests are done then.
In fact, scsi_device_purge_requests() already contains a blk_drain(),
but this will not fully await scsi_device_for_each_req_async(), only the
I/O requests it potentially cancels (not the non-I/O requests).
However, we can have scsi_device_for_each_req_async() increment the BB
in-flight counter, and have scsi_device_for_each_req_async_bh()
decrement it when it is done. This way, the blk_drain() will fully
await all SCSI requests to be purged.
This also removes the need for scsi_device_for_each_req_async_bh() to
double-check the current context and potentially re-schedule itself,
should it now differ from the BB's context: Changing a BB's AioContext
with a root node is done through bdrv_try_change_aio_context(), which
creates a drained section. With this patch, we keep the BB in-flight
counter elevated throughout, so we know the BB's context cannot change.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202144755.671354-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the maximum count of SCRIPTS instructions is reached, the code
stops execution and returns, but fails to decrement the reentrancy
counter. This effectively renders the SCSI controller unusable
because on next entry the reentrancy counter is still above the limit.
This bug was seen on HP-UX 10.20 which seems to trigger SCRIPTS
loops.
Fixes: b987718bbb ("hw/scsi/lsi53c895a: Fix reentrancy issues in the LSI controller (CVE-2023-0330)")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-ID: <20240128202214.2644768-1-svens@stackframe.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Even though the BLAST command isn't fully implemented in QEMU, the DMA_STAT_BCMBLT
bit should be set after the command has been issued to indicate that the command
has completed.
This fixes an issue with the DC390 DOS driver which issues the BLAST command as
part of its normal error recovery routine at startup, and otherwise sits in a
tight loop waiting for DMA_STAT_BCMBLT to be set before continuing.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The setting of DMA_STAT_DONE at the end of a DMA transfer can be configured to
generate an interrupt, however the Linux driver manually checks for DMA_STAT_DONE
being set and if it is, considers that a DMA transfer has completed.
If DMA_STAT_DONE is set but the ESP device isn't indicating an interrupt then
the Linux driver considers this to be a spurious interrupt. However this can
occur in QEMU as there is a delay between the end of DMA transfer where
DMA_STAT_DONE is set, and the ESP device raising its completion interrupt.
This appears to be an incorrect assumption in the Linux driver as the ESP and
PCI DMA interrupt sources are separate (and may not be raised exactly
together), however we can work around this by synchronising the setting of
DMA_STAT_DONE at the end of a DMA transfer with the ESP completion interrupt.
In conjunction with the previous commit Linux is now able to correctly boot
from an am53c974 PCI SCSI device on the hppa C3700 machine without emitting
"iget: checksum invalid" and "Spurious irq, sreg=10" errors.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The am53c974/dc390 PCI interrupt has two separate sources: the first is from the
internal ESP device, and the second is from the PCI DMA transfer logic.
Update the ESP interrupt handler so that it sets DMA_STAT_SCSIINT rather than
driving the PCI IRQ directly, and introduce a new esp_pci_update_irq() function
to generate the correct PCI IRQ level. In particular this fixes spurious interrupts
being generated by setting DMA_STAT_DONE at the end of a transfer if DMA_CMD_INTE_D
isn't set in the DMA_CMD register.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The current code in esp_pci_dma_memory_rw() sets the DMA address to the value
of the DMA_SPA (Starting Physical Address) register which is incorrect: this
means that for each callback from the SCSI layer the DMA address is set back
to the starting address.
In the case where only a single SCSI callback occurs (currently for transfer
lengths < 128kB) this works fine, however for larger transfers the DMA address
wraps back to the initial starting address, corrupting the buffer holding the
data transferred to the guest.
Fix esp_pci_dma_memory_rw() to use the DMA_WAC (Working Address Counter) for
the DMA address which is correctly incremented across multiple SCSI layer
transfers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-ID: <20240112131529.515642-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The term "QEMU global mutex" is identical to the more widely used Big
QEMU Lock ("BQL"). Update the code comments and documentation to use
"BQL" instead of "QEMU global mutex".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a 'current_lun' check for a null value
to avoid null pointer dereferencing and
recover host if NULL return
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4eb8606560 (esp: store lun coming from the MESSAGE OUT phase)
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Message-ID: <20231229152647.19699-1-adiupina@astralinux.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is required to use error_report() instead of error_reportf_err(), if the
prior function does not take local_err as the argument. As a result, the
local_err is always NULL and segment fault may happen.
vhost_scsi_start()
-> vhost_scsi_set_endpoint(s) --> does not allocate local_err
-> error_reportf_err()
-> error_vprepend()
-> g_string_append(newmsg, (*errp)->msg) --> (*errp) is NULL
In addition, add ": " at the end of other error_reportf_err() logs.
Fixes: 7962e432b4 ("vhost-user-scsi: support reconnect to backend")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20231214003117.43960-1-dongli.zhang@oracle.com>
Reviewed-by: Feng Li <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for vhost-scsi to be able to create a worker thread
per virtqueue. Right now for vhost-net we get a worker thread per
tx/rx virtqueue pair which scales nicely as we add more virtqueues and
CPUs, but for scsi we get the single worker thread that's shared by all
virtqueues. When trying to send IO to more than 2 virtqueues the single
thread becomes a bottlneck.
This patch adds a new setting, worker_per_virtqueue, which can be set
to:
false: Existing behavior where we get the single worker thread.
true: Create a worker per IO virtqueue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231204231618.21962-3-michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
The SCSI subsystem no longer uses the AioContext lock. Request
processing runs exclusively in the BlockBackend's AioContext since
"scsi: only access SCSIDevice->requests from one thread" and hence the
lock is unnecessary.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-13-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The AioContext lock no longer has any effect. Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231205182011.1976568-9-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the removal of AioContext locking, the correctness of the code
relies on running requests from a single AioContext at any given time.
Add assertions that verify that callbacks are invoked in the correct
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231205182011.1976568-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Protect the Task Management Function BH state with a lock. The TMF BH
runs in the main loop thread. An IOThread might process a TMF at the
same time as the TMF BH is running. Therefore tmf_bh_list and tmf_bh
must be protected by a lock.
Run TMF request completion in the IOThread using aio_wait_bh_oneshot().
This avoids more locking to protect the virtqueue and SCSI layer state.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_aio_*() doesn't require the AioContext lock and the SCSI subsystem's
internal state also does not anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231204164259.1515217-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_queue_aio_attach_host_notifier() does not require the AioContext
lock. Stop taking the lock and add an explicit smp_wmb() because we were
relying on the implicit barrier in the AioContext lock before.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231204164259.1515217-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stop depending on the AioContext lock and instead access
SCSIDevice->requests from only one thread at a time:
- When the VM is running only the BlockBackend's AioContext may access
the requests list.
- When the VM is stopped only the main loop may access the requests
list.
These constraints protect the requests list without the need for locking
in the I/O code path.
Note that multiple IOThreads are not supported yet because the code
assumes all SCSIRequests are executed from a single AioContext. Leave
that as future work.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20231204164259.1515217-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Keep it the same to vhost-user-blk.
At the same time, fix the vhost_reset_device.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231123055431.217792-3-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the error occurs in vhost_dev_init, the value of s->connected is set to true
in advance, and there is no chance to enter this function execution again
in the future.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231123055431.217792-2-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost blocks migration if logging is not supported to track dirty
memory, and vhost-user blocks it if the log cannot be saved to a shm fd.
vhost-vdpa blocks migration if both hosts do not support all the device's
features using a shadow VQ, for tracking requests and dirty memory.
vhost-scsi blocks migration if storage cannot be shared across hosts,
or if state cannot be migrated.
None of these conditions apply if the old and new qemu processes do
not run concurrently, and if new qemu starts on the same host as old,
which is the case for cpr.
Narrow the scope of these blockers so they only apply to normal mode.
They will not block cpr modes when they are added in subsequent patches.
No functional change until a new mode is added.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-5-git-send-email-steven.sistare@oracle.com>
The networking subsystem may wish to use defer_call(), so move the code
to util/ where it can be reused.
As a reminder of what defer_call() does:
This API defers a function call within a defer_call_begin()/defer_call_end()
section, allowing multiple calls to batch up. This is a performance
optimization that is used in the block layer to submit several I/O requests
at once instead of individually:
defer_call_begin(); <-- start of section
...
defer_call(my_func, my_obj); <-- deferred my_func(my_obj) call
defer_call(my_func, my_obj); <-- another
defer_call(my_func, my_obj); <-- another
...
defer_call_end(); <-- end of section, my_func(my_obj) is called once
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Prepare to move the blk_io_plug_call() API out of the block layer so
that other subsystems call use this deferred call mechanism. Rename it
to defer_call() but leave the code in block/plug.c.
The next commit will move the code out of the block layer.
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
=ILek
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
# pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
# 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
# ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
# 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
# zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
# =ILek
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits)
intel-iommu: Report interrupt remapping faults, fix return value
MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section
vhost-user: Fix protocol feature bit conflict
tests/acpi: Update DSDT.cxl with QTG DSM
hw/cxl: Add QTG _DSM support for ACPI0017 device
tests/acpi: Allow update of DSDT.cxl
hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range
vhost-user: fix lost reconnect
vhost-user-scsi: start vhost when guest kicks
vhost-user-scsi: support reconnect to backend
vhost: move and rename the conn retry times
vhost-user-common: send get_inflight_fd once
hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine
hw/isa/piix: Implement multi-process QEMU support also for PIIX4
hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring
hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4
hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4
hw/isa/piix: Share PIIX3's base class with PIIX4
hw/isa/piix: Harmonize names of reset control memory regions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When the vhost-user is reconnecting to the backend, and if the vhost-user fails
at the get_features in vhost_dev_init(), then the reconnect will fail
and it will not be retriggered forever.
The reason is:
When the vhost-user fails at get_features, the vhost_dev_cleanup will be called
immediately.
vhost_dev_cleanup calls 'memset(hdev, 0, sizeof(struct vhost_dev))'.
The reconnect path is:
vhost_user_blk_event
vhost_user_async_close(.. vhost_user_blk_disconnect ..)
qemu_chr_fe_set_handlers <----- clear the notifier callback
schedule vhost_user_async_close_bh
The vhost->vdev is null, so the vhost_user_blk_disconnect will not be
called, then the event fd callback will not be reinstalled.
All vhost-user devices have this issue, including vhost-user-blk/scsi.
With this patch, if the vdev->vdev is null, the fd callback will still
be reinstalled.
Fixes: 71e076a07d ("hw/virtio: generalise CHR_EVENT_CLOSED handling")
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20231009044735.941655-6-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's keep the same behavior as vhost-user-blk.
Some old guests kick virtqueue before setting VIRTIO_CONFIG_S_DRIVER_OK.
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20231009044735.941655-5-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the backend crashes and restarts, the device is broken.
This patch adds reconnect for vhost-user-scsi.
This patch also improves the error messages, and reports some silent errors.
Tested with spdk backend.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20231009044735.941655-4-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Currently the get_inflight_fd will be sent every time the device is started, and
the backend will allocate shared memory to save the inflight state. If the
backend finds that it receives the second get_inflight_fd, it will release the
previous shared memory, which breaks inflight working logic.
This patch is a preparation for the following patches.
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20231009044735.941655-2-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-user-scsi has a VirtioDeviceClass->reset() function that calls
->vhost_reset_device(). The other vhost devices don't notify the vhost
device upon reset.
Stateful vhost devices may need to handle device reset in order to free
resources or prevent stale device state from interfering after reset.
Call ->vhost_device_reset() from virtio_reset() so that that vhost
devices are notified of device reset.
This patch affects behavior as follows:
- vhost-kernel: No change in behavior since ->vhost_reset_device() is
not implemented.
- vhost-user: back-ends that negotiate
VHOST_USER_PROTOCOL_F_RESET_DEVICE now receive a
VHOST_USER_DEVICE_RESET message upon device reset. Otherwise there is
no change in behavior. DPDK, SPDK, libvhost-user, and the
vhost-user-backend crate do not negotiate
VHOST_USER_PROTOCOL_F_RESET_DEVICE automatically.
- vhost-vdpa: an extra SET_STATUS 0 call is made during device reset.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231004014532.1228637-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
The VHOST_USER_RESET_OWNER message is deprecated in the spec:
This is no longer used. Used to be sent to request disabling all
rings, but some back-ends interpreted it to also discard connection
state (this interpretation would lead to bugs). It is recommended
that back-ends either ignore this message, or use it to disable all
rings.
The only caller of vhost_user_reset_device() is vhost_user_scsi_reset().
It checks that F_RESET_DEVICE was negotiated before calling it:
static void vhost_user_scsi_reset(VirtIODevice *vdev)
{
VHostSCSICommon *vsc = VHOST_SCSI_COMMON(vdev);
struct vhost_dev *dev = &vsc->dev;
/*
* Historically, reset was not implemented so only reset devices
* that are expecting it.
*/
if (!virtio_has_feature(dev->protocol_features,
VHOST_USER_PROTOCOL_F_RESET_DEVICE)) {
return;
}
if (dev->vhost_ops->vhost_reset_device) {
dev->vhost_ops->vhost_reset_device(dev);
}
}
Therefore VHOST_USER_RESET_OWNER is actually never sent by
vhost_user_reset_device(). Remove the dead code. This effectively moves
the vhost-user protocol specific code from vhost-user-scsi.c into
vhost-user.c where it belongs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20231004014532.1228637-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
Access QOM parent with the proper QOM VIRTIO_SCSI_COMMON() macro.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20231017140150.44995-5-philmd@linaro.org>
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmUd4/YPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpyM8H/02cRbJcQOjYt7j68zPW6GaDXxBI/UmdWDyG
15LZZbGNOPjyjNd3Vz1M7stQ5rhoKcgo/RdI+0E60a78svgW5JvpXoXR3pksc3Dx
v28B/akXwHUErYFSZQ+2VHNc8OhCd0v2ehxZxbwPEAYIOAj3hcCIVoPGXTnKJmAJ
imr5hjH0wZUc0+xdsmn8Vfdv5NTzpwfVObbGiMZejeJsaoh0y6Rt8RANBMY67KQD
S7/HPlVuDYf/y43t4ZEHNYuV9RaCdZZYlLWwV1scdKaYcofgmtJOKbOdCjHRXgj+
004Afb3rggIoCfnCzOFzhGx+MLDtLjvEn2N4oLEWCLi+k/3huaA=
=GAvH
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pci: features, cleanups
vdpa:
shadow vq vlan support
net migration with cvq
cxl:
support emulating 4 HDM decoders
serial number extended capability
virtio:
hared dma-buf
Fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
libvhost-user: handle shared_object msg
vhost-user: add shared_object msg
hw/display: introduce virtio-dmabuf
util/uuid: add a hash function
virtio: remove unused next argument from virtqueue_split_read_next_desc()
virtio: remove unnecessary thread fence while reading next descriptor
virtio: use shadow_avail_idx while checking number of heads
libvhost-user.c: add assertion to vu_message_read_default
pcie_sriov: unregister_vfs(): fix error path
hw/i386/pc: improve physical address space bound check for 32-bit x86 systems
amd_iommu: Fix APIC address check
vdpa net: follow VirtIO initialization properly at cvq isolation probing
vdpa net: stop probing if cannot set features
vdpa net: fix error message setting virtio status
hw/pci-bridge/cxl-upstream: Add serial number extended capability support
hw/cxl: Support 4 HDM decoders at all levels of topology
hw/cxl: Fix and use same calculation for HDM decoder block size everywhere
hw/cxl: Add utility functions decoder interleave ways and target count.
hw/cxl: Push cxl_decoder_count_enc() and cxl_decode_ig() into .c
vdpa net: zero vhost_vdpa iova_tree pointer at cleanup
...
Conflicts:
hw/core/machine.c
Context conflict with commit 314e0a84cd ("hw/core: remove needless
includes") because it removed an adjacent #include.
Move the definition of VhostUserProtocolFeature to
include/hw/virtio/vhost-user.h.
Remove previous definitions in hw/scsi/vhost-user-scsi.c,
hw/virtio/vhost-user.c, and hw/virtio/virtio-qmp.c.
Previously there were 3 separate definitions of this over 3 different
files. Now only 1 definition of this will be present for these 3 files.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Otherwise when a FORMAT UNIT command is issued, the SCSI layer can become
confused because it can find itself in the situation where it thinks there
is still data to be transferred which can cause the next emulated SCSI
command to fail.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 6ab71761 ("scsi-disk: add FORMAT UNIT command")
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230913204410.65650-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the case where a SCSI layer transfer is incorrectly terminated, it is
possible for a TI command to cause a SCSI buffer overflow due to the
expected transfer data length being less than the available data in the
FIFO. When this occurs the unsigned async_len variable underflows and
becomes a large offset which writes past the end of the allocated SCSI
buffer.
Restrict the non-DMA transfer length to be the smallest of the expected
transfer length and the available FIFO data to ensure that it is no longer
possible for the SCSI buffer overflow to occur.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1810
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230913204410.65650-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The call to esp_dma_enable() was being made with the SYSBUS_ESP type instead of
the ESP type. This meant that when GPIO 1 was being used to trigger a DMA
request from an external DMA controller, the setting of ESPState's dma_enabled
field would clobber unknown memory whilst the dma_cb callback pointer would
typically return NULL so the DMA request would never start.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230913204410.65650-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are doing things like
nb_sectors /= (s->qdev.blocksize / BDRV_SECTOR_SIZE);
in the code here (e.g. in scsi_disk_emulate_mode_sense()), so if
the blocksize is smaller than BDRV_SECTOR_SIZE (=512), this crashes
with a division by 0 exception. Thus disallow block sizes of 256
bytes to avoid this situation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1813
CVE: 2023-42467
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230925091854.49198-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_clear_unit_attention() now only handles REPORTED LUNS DATA HAS
CHANGED.
This only happens when we handle REPORT LUNS commands, so let's rename
the function in scsi_clear_reported_luns_changed() and call it only in
scsi_target_emulate_report_luns().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-ID: <20230712134352.118655-4-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous commit moved the unit attention clearing when we create
the request. So now we can clean scsi_clear_unit_attention() to handle
only the case of the REPORT LUNS command: this is the only case in
which a UNIT ATTENTION is cleared without having been reported.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-ID: <20230712134352.118655-3-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 1880ad4f4e ("virtio-scsi: Batched prepare for cmd reqs") split
calls to scsi_req_new() and scsi_req_enqueue() in the virtio-scsi device.
No ill effects were observed until commit 8cc5583abe ("virtio-scsi: Send
"REPORTED LUNS CHANGED" sense data upon disk hotplug events") added a
unit attention that was easy to trigger with device hotplug and
hot-unplug.
Because the two calls were separated, all requests in the batch were
prepared calling scsi_req_new() to report a sense. The first one
submitted would report the right sense and reset it to NO_SENSE, while
the others reported CHECK_CONDITION with no sense data. This caused
SCSI errors in Linux.
To solve this issue, let's fetch the unit attention as early as possible
when we prepare the request, so that only the first request in the batch
will use the unit attention SCSIReqOps and the others will not report
CHECK CONDITION.
Fixes: 1880ad4f4e ("virtio-scsi: Batched prepare for cmd reqs")
Fixes: 8cc5583abe ("virtio-scsi: Send "REPORTED LUNS CHANGED" sense data upon disk hotplug events")
Reported-by: Thomas Huth <thuth@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2176702
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-ID: <20230712134352.118655-2-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio_scsi_dataplane_stop() calls blk_drain_all(), which invokes
->drained_begin()/->drained_end() after we've already detached the host
notifier. virtio_scsi_drained_end() currently attaches the host notifier
again and leaves it dangling after dataplane has stopped.
This results in the following assertion failure because
virtio_scsi_defer_to_dataplane() is called from the IOThread instead of
the main loop thread:
qemu-system-x86_64: ../softmmu/memory.c:1111: memory_region_transaction_commit: Assertion `qemu_mutex_iothread_locked()' failed.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1680
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230611193924.2444914-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous commit remove the unnecessary "virtio-access.h"
header. These files no longer have target-specific dependency.
Move them to the generic 'softmmu_ss' source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-11-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
None of these files use the VirtIO Load/Store API declared
by "hw/virtio/virtio-access.h". This header probably crept
in via copy/pasting, remove it.
Note, "virtio-access.h" is target-specific, so any file
including it also become tainted as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-10-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Following the SCSI variable named '[specific_]scsi_ss', rename the
target-specific VirtIO/SCSI set prefixed with 'specific_'. This will
help when adding target-agnostic VirtIO/SCSI set in few commits.
No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-5-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
We will modify this file shortly. Re-arrange it slightly first,
declaring source sets first.
No logical change.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230524093744.88442-4-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Instead of adding 'vhost-scsi-common.c' twice (for VHOST_SCSI and
VHOST_USER_SCSI), have it depend on VHOST_SCSI_COMMON, selected by
both symbols.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GCC9 is confused when building with CFLAG -O3:
hw/scsi/megasas.c: In function ‘megasas_scsi_realize’:
hw/scsi/megasas.c:2387:26: error: duplicated ‘if’ condition [-Werror=duplicated-cond]
2387 | } else if (s->fw_sge >= 128 - MFI_PASS_FRAME_SIZE) {
hw/scsi/megasas.c:2385:19: note: previously used here
2385 | if (s->fw_sge >= MEGASAS_MAX_SGE - MFI_PASS_FRAME_SIZE) {
cc1: all warnings being treated as errors
When this device was introduced in commit e8f943c3bc, the author
cared about modularity, using a definition for the firmware limit.
However if the firmware limit isn't changed (MEGASAS_MAX_SGE = 128),
the code ends doing the same check twice.
Per the maintainer [*]:
> The original code assumed that one could change MFI_PASS_FRAME_SIZE,
> but it turned out not to be possible as it's being hardcoded in the
> drivers themselves (even though the interface provides mechanisms to
> query it). So we can remove the duplicate lines.
Add the 'MEGASAS_MIN_SGE' definition for the '64' magic value,
slightly rewrite the condition check to simplify a bit the logic
and remove the unnecessary / duplicated check.
[*] https://lore.kernel.org/qemu-devel/e0029fc5-882f-1d63-15e3-1c3dbe9b6a2c@suse.de/
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20230328210126.16282-1-philmd@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce a new API for thread-local blk_io_plug() that does not
traverse the block graph. The goal is to make blk_io_plug() multi-queue
friendly.
Instead of having block drivers track whether or not we're in a plugged
section, provide an API that allows them to defer a function call until
we're unplugged: blk_io_plug_call(fn, opaque). If blk_io_plug_call() is
called multiple times with the same fn/opaque pair, then fn() is only
called once at the end of the function - resulting in batching.
This patch introduces the API and changes blk_io_plug()/blk_io_unplug().
blk_io_plug()/blk_io_unplug() no longer require a BlockBackend argument
because the plug state is now thread-local.
Later patches convert block drivers to blk_io_plug_call() and then we
can finally remove .bdrv_co_io_plug() once all block drivers have been
converted.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-scsi Host Bus Adapter provides access to devices on a SCSI
bus. Those SCSI devices typically have a BlockBackend. When the
BlockBackend enters a drained section, the SCSI device must temporarily
stop submitting new I/O requests.
Implement this behavior by temporarily stopping virtio-scsi virtqueue
processing when one of the SCSI devices enters a drained section. The
new scsi_device_drained_begin() API allows scsi-disk to message the
virtio-scsi HBA.
scsi_device_drained_begin() uses a drain counter so that multiple SCSI
devices can have overlapping drained sections. The HBA only sees one
pair of .drained_begin/end() calls.
After this commit, virtio-scsi no longer depends on hw/virtio's
ioeventfd aio_set_event_notifier(is_external=true). This commit is a
step towards removing the aio_disable_external() API.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-19-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_queue_aio_detach_host_notifier() does two things:
1. It removes the fd handler from the event loop.
2. It processes the virtqueue one last time.
The first step can be peformed by any thread and without taking the
AioContext lock.
The second step may need the AioContext lock (depending on the device
implementation) and runs in the thread where request processing takes
place. virtio-blk and virtio-scsi therefore call
virtio_queue_aio_detach_host_notifier() from a BH that is scheduled in
AioContext.
The next patch will introduce a .drained_begin() function that needs to
call virtio_queue_aio_detach_host_notifier(). .drained_begin() functions
cannot call aio_poll() to wait synchronously for the BH. It is possible
for a .drained_poll() callback to asynchronously wait for the BH, but
that is more complex than necessary here.
Move the virtqueue processing out to the callers of
virtio_queue_aio_detach_host_notifier() so that the function can be
called from any thread. This is in preparation for the next patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-17-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is part of an effort to remove the aio_disable_external()
API because it does not fit in a multi-queue block layer world where
many AioContexts may be submitting requests to the same disk.
The SCSI emulation code is already in good shape to stop using
aio_disable_external(). It was only used by commit 9c5aad84da
("virtio-scsi: fixed virtio_scsi_ctx_check failed when detaching scsi
disk") to ensure that virtio_scsi_hotunplug() works while the guest
driver is submitting I/O.
Ensure virtio_scsi_hotunplug() is safe as follows:
1. qdev_simple_device_unplug_cb() -> qdev_unrealize() ->
device_set_realized() calls qatomic_set(&dev->realized, false) so
that future scsi_device_get() calls return NULL because they exclude
SCSIDevices with realized=false.
That means virtio-scsi will reject new I/O requests to this
SCSIDevice with VIRTIO_SCSI_S_BAD_TARGET even while
virtio_scsi_hotunplug() is still executing. We are protected against
new requests!
2. scsi_qdev_unrealize() already contains a call to
scsi_device_purge_requests() so that in-flight requests are cancelled
synchronously. This ensures that no in-flight requests remain once
qdev_simple_device_unplug_cb() returns.
Thanks to these two conditions we don't need aio_disable_external()
anymore.
Cc: Zhengui Li <lizhengui@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only report a transport reset event to the guest after the SCSIDevice
has been unrealized by qdev_simple_device_unplug_cb().
qdev_simple_device_unplug_cb() sets the SCSIDevice's qdev.realized field
to false so that scsi_device_find/get() no longer see it.
scsi_target_emulate_report_luns() also needs to be updated to filter out
SCSIDevices that are unrealized.
Change virtio_scsi_push_event() to take event information as an argument
instead of the SCSIDevice. This allows virtio_scsi_hotunplug() to emit a
VIRTIO_SCSI_T_TRANSPORT_RESET event after the SCSIDevice has already
been unrealized.
These changes ensure that the guest driver does not see the SCSIDevice
that's being unplugged if it responds very quickly to the transport
reset event.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a helper function to check whether the device is realized without
requiring the Big QEMU Lock. The next patch adds a second caller. The
goal is to avoid spreading DeviceState field accesses throughout the
code.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We cannot use the generic reentrancy guard in the LSI code, so
we have to manually prevent endless reentrancy here. The problematic
lsi_execute_script() function has already a way to detect whether
too many instructions have been executed - we just have to slightly
change the logic here that it also takes into account if the function
has been called too often in a reentrant way.
The code in fuzz-lsi53c895a-test.c has been taken from an earlier
patch by Mauro Matteo Cascella.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1563
Message-Id: <20230522091011.1082574-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While trying to use a SCSI disk on the LSI controller with an
older version of Fedora (25), I'm getting:
qemu: warning: Blocked re-entrant IO on MemoryRegion: lsi-mmio at addr: 0x34
and the SCSI controller is not usable. Seems like we have to
disable the reentrancy checker for the MMIO region, too, to
get this working again.
The problem could be reproduced it like this:
./qemu-system-x86_64 -accel kvm -m 2G -machine q35 \
-device lsi53c810,id=lsi1 -device scsi-hd,drive=d0 \
-drive if=none,id=d0,file=.../somedisk.qcow2 \
-cdrom Fedora-Everything-netinst-i386-25-1.3.iso
Where somedisk.qcow2 is an image that contains already some partitions
and file systems.
In the boot menu of Fedora, go to
"Troubleshooting" -> "Rescue a Fedora system" -> "3) Skip to shell"
Then check "dmesg | grep -i 53c" for failure messages, and try to mount
a partition from somedisk.qcow2.
Message-Id: <20230516090556.553813-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using linux 6.x guest, at boot time, an inquiry on a scsi-generic
device makes qemu crash. This is caused by a buffer overflow when
scsi-generic patches the block limits VPD page.
Do the operations on a temporary on-stack buffer that is guaranteed
to be large enough.
Reported-by: Théo Maillart <tmaillart@freebox.fr>
Analyzed-by: Théo Maillart <tmaillart@freebox.fr>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need for the AioContext lock in aio_wait_bh_oneshot().
It's easy to remove the lock from existing callers and then switch from
AIO_WAIT_WHILE() to AIO_WAIT_WHILE_UNLOCKED() in aio_wait_bh_oneshot().
Document that the AioContext lock should not be held across
aio_wait_bh_oneshot(). Holding a lock across aio_poll() can cause
deadlock so we don't want callers to do that.
This is a step towards getting rid of the AioContext lock.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230404153307.458883-1-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As the code is designed to use the memory APIs to access the script ram,
disable reentrancy checks for the pseudo-RAM ram_io MemoryRegion.
In the future, ram_io may be converted from an IO to a proper RAM MemoryRegion.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-6-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This protects devices from bh->mmio reentrancy issues.
Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Free Software Foundation moved to a new address and some
sources in QEMU referred to their old location.
The address should be updated and replaced by a pointer to
<https://www.gnu.org/licenses/>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/379
Signed-off-by: Khadija Kamran <kkamran.bese16seecs@seecs.edu.pk>
Message-Id: <576ee9203fdac99d7251a98faa66b9ce1e7febc5.1675941486.git.kkamran.bese16seecs@seecs.edu.pk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When an IOThread is configured, the ctrl virtqueue is processed in the
IOThread. TMFs that reset SCSI devices are currently called directly
from the IOThread and trigger an assertion failure in blk_drain() from
the following call stack:
virtio_scsi_handle_ctrl_req -> virtio_scsi_do_tmf -> device_code_reset
-> scsi_disk_reset -> scsi_device_purge_requests -> blk_drain
../block/block-backend.c:1780: void blk_drain(BlockBackend *): Assertion `qemu_in_main_thread()' failed.
The blk_drain() function is not designed to be called from an IOThread
because it needs the Big QEMU Lock (BQL).
This patch defers TMFs that reset SCSI devices to a Bottom Half (BH)
that runs in the main loop thread under the BQL. This way it's safe to
call blk_drain() and the assertion failure is avoided.
Introduce s->tmf_bh_list for tracking TMF requests that have been
deferred to the BH. When the BH runs it will grab the entire list and
process all requests. Care must be taken to clear the list when the
virtio-scsi device is reset or unrealized. Otherwise deferred TMF
requests could execute later and lead to use-after-free or other
undefined behavior.
The s->resetting counter that's used by TMFs that reset SCSI devices is
accessed from multiple threads. This patch makes that explicit by using
atomic accessor functions. With this patch applied the counter is only
modified by the main loop thread under the BQL but can be read by any
thread.
Reported-by: Qing Wang <qinwang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
dma_blk_cb() only takes the AioContext lock around ->io_func(). That
means the rest of dma_blk_cb() is not protected. In particular, the
DMAAIOCB field accesses happen outside the lock.
There is a race when the main loop thread holds the AioContext lock and
invokes scsi_device_purge_requests() -> bdrv_aio_cancel() ->
dma_aio_cancel() while an IOThread executes dma_blk_cb(). The dbs->acb
field determines how cancellation proceeds. If dma_aio_cancel() sees
dbs->acb == NULL while dma_blk_cb() is still running, the request can be
completed twice (-ECANCELED and the actual return value).
The following assertion can occur with virtio-scsi when an IOThread is
used:
../hw/scsi/scsi-disk.c:368: scsi_dma_complete: Assertion `r->req.aiocb != NULL' failed.
Fix the race by holding the AioContext across dma_blk_cb(). Now
dma_aio_cancel() under the AioContext lock will not see
inconsistent/intermediate states.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If requests are being processed in the IOThread when a SCSIDevice is
unplugged, scsi_device_purge_requests() -> scsi_req_cancel_async() races
with I/O completion callbacks. Both threads load and store req->aiocb.
This can lead to assert(r->req.aiocb == NULL) failures and undefined
behavior.
Protect r->req.aiocb with the AioContext lock to prevent the race.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_getlength is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Because now this function creates a new coroutine and polls, we need to
take the AioContext lock where it is missing, for the only reason that
internally co_wrapper calls AIO_WAIT_WHILE and it expects to release the
AioContext lock.
This is especially messy when a co_wrapper creates a coroutine and polls
in bdrv_open_driver, because this function has so many callers in so
many context that it can easily lead to deadlocks. Therefore the new
rule for bdrv_open_driver is that the caller must always hold the
AioContext lock of the given bs (except if it is a coroutine), because
the function calls bdrv_refresh_total_sectors() which is now a
co_wrapper.
Once the rwlock is ultimated and placed in every place it needs to be,
we will poll using AIO_WAIT_WHILE_UNLOCKED and remove the AioContext
lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is below memleak detected when to quit the qemu-system-x86_64 (with
vhost-scsi-pci).
(qemu) quit
=================================================================
==15568==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f00aec57917 in __interceptor_calloc (/lib64/libasan.so.6+0xb4917)
#1 0x7f00ada0d7b5 in g_malloc0 (/lib64/libglib-2.0.so.0+0x517b5)
#2 0x5648ffd38bac in vhost_scsi_start ../hw/scsi/vhost-scsi.c:92
#3 0x5648ffd38d52 in vhost_scsi_set_status ../hw/scsi/vhost-scsi.c:131
#4 0x5648ffda340e in virtio_set_status ../hw/virtio/virtio.c:2036
#5 0x5648ff8de281 in virtio_ioport_write ../hw/virtio/virtio-pci.c:431
#6 0x5648ff8deb29 in virtio_pci_config_write ../hw/virtio/virtio-pci.c:576
#7 0x5648ffe5c0c2 in memory_region_write_accessor ../softmmu/memory.c:493
#8 0x5648ffe5c424 in access_with_adjusted_size ../softmmu/memory.c:555
#9 0x5648ffe6428f in memory_region_dispatch_write ../softmmu/memory.c:1515
#10 0x5648ffe8613d in flatview_write_continue ../softmmu/physmem.c:2825
#11 0x5648ffe86490 in flatview_write ../softmmu/physmem.c:2867
#12 0x5648ffe86d9f in address_space_write ../softmmu/physmem.c:2963
#13 0x5648ffe86e57 in address_space_rw ../softmmu/physmem.c:2973
#14 0x5648fffbfb3d in kvm_handle_io ../accel/kvm/kvm-all.c:2639
#15 0x5648fffc0e0d in kvm_cpu_exec ../accel/kvm/kvm-all.c:2890
#16 0x5648fffc90a7 in kvm_vcpu_thread_fn ../accel/kvm/kvm-accel-ops.c:51
#17 0x56490042400a in qemu_thread_start ../util/qemu-thread-posix.c:505
#18 0x7f00ac3b6ea4 in start_thread (/lib64/libpthread.so.0+0x7ea4)
Free the vsc->inflight at the 'stop' path.
Fixes: b82526c7ee ("vhost-scsi: support inflight io track")
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Li Feng <fengli@smartx.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20230104160433.21353-1-dongli.zhang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/pci/pci_bridge.h and hw/cxl/cxl.h include each other.
Fortunately, breaking the loop is merely a matter of deleting
unnecessary includes from headers, and adding them back in places
where they are now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-2-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Those typos are in files which are used to generate the QEMU manual.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221110190825.879620-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[thuth: update sentence in can.rst as suggested by Peter]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently the vwm_pvscsi controller resets individual SCSI devices
with the device_legacy_reset() function. The only difference between
this and device_cold_reset() is that device_legacy_reset() resets the
device but not any child qbuses it might have.
In this case, no SCSI device has a child qbus, so the functions have
the same behaviour. Switch to device_cold_reset() to move away from
using the deprecated function, and bring this SCSI controller in to
line with what all the others do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221013160623.1296109-3-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the SCSI subsystem we currently use the legacy functions
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, starting from either a qbus or a qdev. However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.
Switch to using the device_cold_reset() and bus_cold_reset()
functions. These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.
Since no devices attached to SCSI buses currently try to use 3-phase
reset, this should be a no-behaviour-change commit which just reduces
the use of a deprecated API.
Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/scsi/*.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221013160623.1296109-2-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Section 5.6.6.3 of VirtIO specification states, "Events will also
be reported via sense codes..." However, no sense data is sent when
VIRTIO_SCSI_EVT_RESET_RESCAN or VIRTIO_SCSI_EVT_RESET_REMOVED events
are reported (when disk hotplug/hotunplug events occur). SCSI layer
on Solaris depends on this sense data, and hence does not handle disk
hotplug/hotunplug events.
When the disk inventory changes, use the bus unit attention mechanism
to return a CHECK_CONDITION status with sense data of 0x06/0x3F/0x0E
(sense code REPORTED_LUNS_CHANGED). The first device on the bus to
execute a command successfully will report and consume the unit
attention status.
Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <20221006194946.24134-1-venu.busireddy@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SunOS expects CD-ROM devices to have a block size of 512, and will
fail to mount or install using QEMU's default block size of 2048.
When initializing the SCSI device, allow the `physical_block_size'
block device option to override the default block size.
Signed-off-by: John Millikin <john@john-millikin.com>
Message-Id: <20220804122950.1577012-1-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
dev state in the vhost_migration_log routine). Mark that as a FIXME
because it introduces a potential race. I think the referenced fix
should be tracking its state locally.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>
In scsi_req_parse_cdb(), if the CDB length implied by the command type
exceeds the initialized portion of the command buffer, reject the request.
Rejected requests are recorded by the `scsi_req_parse_bad` trace event.
On example of a bug detected by this check is SunOS's use of interleaved
DMA and non-DMA commands. This guest behavior currently causes QEMU to
parse uninitialized memory as a SCSI command, with unpredictable
outcomes.
With the new check in place:
* QEMU consistently creates a trace event and rejects the request.
* SunOS retries the request(s) and is able to successfully boot from
disk.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-2-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a SCSI command is received from the guest, the CDB length implied
by the first byte might exceed the number of bytes the guest sent. In
this case scsi_req_new() will read uninitialized data, causing
unpredictable behavior.
Adds the buf_len parameter to scsi_req_new() and plumbs it through the
call stack.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-1-john@john-millikin.com>
[Fill in correct length for adapters other than ESP. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per investigation on the linked ticket, SunOS issues a SCSI bus reset
to the ESP as part of its boot sequence. If this ESP command doesn't
cause devices to assert sense flag UNIT ATTENTION, SunOS will consider
the CD-ROM device to be non-compliant with Common Command Set (CCS).
In this condition, the SunOS installer's early userspace doesn't set
the installation source location to sr0 and the miniroot copy fails.
Signed-off-by: John Millikin <john@john-millikin.com>
Suggested-by: Bill Paul <noisetube@gmail.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053846.699310-1-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commits 01ef8185b8 amd 24b36e9813 updated the way that the maximum
transfer length is calculated for patching block limits VPD page in an
INQUIRY response.
The same updates also need to be made for the case where the host device
does not support the block limits VPD page at all and we emulate the
whole page.
Without this fix, on host block devices a maximum transfer length of
(INT_MAX - sector_size) bytes is advertised to the guest, resulting in
I/O errors when a request that exceeds the host limits is made by the
guest. (Prior to commit 24b36e9813, this code path would use the
max_transfer value from the host instead of INT_MAX, but still miss the
fix from 01ef8185b8 where max_transfer is also capped to max_iov
host pages, so it would be less wrong, but still wrong.)
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2096251
Fixes: 01ef8185b8
Fixes: 24b36e9813
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220822125320.48257-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As soon as virtio_scsi_data_plane_start() attaches host notifiers the
IOThread may start virtqueue processing. There is a race between
IOThread virtqueue processing and virtio_scsi_data_plane_start() because
it only assigns s->dataplane_started after attaching host notifiers.
When a virtqueue handler function in the IOThread calls
virtio_scsi_defer_to_dataplane() it may see !s->dataplane_started and
attempt to start dataplane even though we're already in the IOThread:
#0 0x00007f67b360857c __pthread_kill_implementation (libc.so.6 + 0xa257c)
#1 0x00007f67b35bbd56 raise (libc.so.6 + 0x55d56)
#2 0x00007f67b358e833 abort (libc.so.6 + 0x28833)
#3 0x00007f67b358e75b __assert_fail_base.cold (libc.so.6 + 0x2875b)
#4 0x00007f67b35b4cd6 __assert_fail (libc.so.6 + 0x4ecd6)
#5 0x000055ca87fd411b memory_region_transaction_commit (qemu-kvm + 0x67511b)
#6 0x000055ca87e17811 virtio_pci_ioeventfd_assign (qemu-kvm + 0x4b8811)
#7 0x000055ca87e14836 virtio_bus_set_host_notifier (qemu-kvm + 0x4b5836)
#8 0x000055ca87f8e14e virtio_scsi_set_host_notifier (qemu-kvm + 0x62f14e)
#9 0x000055ca87f8dd62 virtio_scsi_dataplane_start (qemu-kvm + 0x62ed62)
#10 0x000055ca87e14610 virtio_bus_start_ioeventfd (qemu-kvm + 0x4b5610)
#11 0x000055ca87f8c29a virtio_scsi_handle_ctrl (qemu-kvm + 0x62d29a)
#12 0x000055ca87fa5902 virtio_queue_host_notifier_read (qemu-kvm + 0x646902)
#13 0x000055ca882c099e aio_dispatch_handler (qemu-kvm + 0x96199e)
#14 0x000055ca882c1761 aio_poll (qemu-kvm + 0x962761)
#15 0x000055ca880e1052 iothread_run (qemu-kvm + 0x782052)
#16 0x000055ca882c562a qemu_thread_start (qemu-kvm + 0x96662a)
This patch assigns s->dataplane_started before attaching host notifiers
so that virtqueue handler functions that run in the IOThread before
virtio_scsi_data_plane_start() returns correctly identify that dataplane
does not need to be started. This fix is taken from the virtio-blk
dataplane code and it's worth adding a comment in virtio-blk as well to
explain why it works.
Note that s->dataplane_started does not need the AioContext lock because
it is set before attaching host notifiers and cleared after detaching
host notifiers. In other words, the IOThread always sees the value true
and the main loop thread does not modify it while the IOThread is
active.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2099541
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220808162134.240405-1-stefanha@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The existing code assumes that the block size can be generated from p[1] << 8
in multiple places which ignores the top and bottom 8 bits. If the block size
is allowed to be set to an arbitrary value then this causes a mismatch
between the value written by the guest in the block descriptor and the value
subsequently read back using READ CAPACITY causing the guest to generate
requests that can crash QEMU.
For now restrict block size changes to bits 8-15 and also ignore requests to
set the block size to 0 which causes the SCSI emulation to crash in at least
one place with a divide by zero error.
Fixes: 356c4c441e ("scsi-disk: allow MODE SELECT block descriptor to set the block size")
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1112
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220730122656.253448-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In scsi_disk_emulate_write_same() the number of host sectors to transfer is
calculated as (s->qdev.blocksize / BDRV_SECTOR_SIZE) which is then used to
copy data in block size chunks to the iov buffer.
Since the loop copying the data to the iov buffer uses a fixed increment of
s->qdev.blocksize then using a block size that isn't a multiple of
BDRV_SECTOR_SIZE introduces a rounding error in the iov buffer size calculation
such that the iov buffer copy overflows the space allocated.
Update the iov buffer copy for() loop so that it will use the smallest of either
the current block size or the remaining transfer count to prevent the overflow.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220730122656.253448-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MODE SELECT command can contain an optional block descriptor that can be used
to set the device block size. If the block descriptor is present then update the
block size on the SCSI device accordingly.
This allows CDROMs to be used with A/UX which requires a CDROM drive which is
capable of switching from a 2048 byte sector size to a 512 byte sector size.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A/UX sends a MODE_PAGE_R_W_ERROR command with the AWRE bit set to 0 when enumerating
CDROM drives. Since the bit is currently hardcoded to 1 then indicate that the AWRE
bit can be changed (even though we don't care about the value) so that
the MODE_PAGE_R_W_ERROR page can be set successfully.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When A/UX configures the CDROM device it sends a truncated MODE SELECT request
for page 1 (MODE_PAGE_R_W_ERROR) which is only 6 bytes in length rather than
10. This seems to be due to bug in Apple's code which calculates the CDB message
length incorrectly.
The work at [1] suggests that this truncated request is accepted on real
hardware whereas in QEMU it generates an INVALID_PARAM_LEN sense code which
causes A/UX to get stuck in a loop retrying the command in an attempt to succeed.
Alter the mode page request length check so that truncated requests are allowed
if the SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk is enabled, whilst also adding a
trace event to enable the condition to be detected.
[1] https://68kmla.org/bb/index.php?threads/scsi2sd-project-anyone-interested.29040/page-7#post-316444
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When initialising a drive ready to install MacOS, Apple HD SC Setup first attempts
to format the drive. Add a simple FORMAT UNIT command which simply returns success
to allow the format to succeed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220622105314.802852-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both MacOS and A/UX make use of vendor-specific MODE SELECT commands with PF=0
to identify SCSI devices:
- MacOS sends a MODE SELECT command with PF=0 for the MODE_PAGE_VENDOR_SPECIFIC
(0x0) mode page containing 2 bytes before initialising a disk
- A/UX (installed on disk) sends a MODE SELECT command with PF=0 during SCSI
bus enumeration, and gets stuck in an infinite loop if it fails
Add a new SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk to allow both
PF=0 MODE SELECT commands and implement a MODE_PAGE_VENDOR_SPECIFIC (0x0)
mode page which is compatible with MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During SCSI bus enumeration A/UX sends a MODE SENSE command to the CDROM with
the DBD bit unset and expects the response to include a block descriptor. As per
the latest SCSI documentation, QEMU currently force-disables the block
descriptor for CDROM devices but the A/UX driver expects the requested block
descriptor to be returned.
If the block descriptor is not returned in the response then A/UX becomes
confused, since the block descriptor returned in the MODE SENSE response is
used to generate a subsequent MODE SELECT command which is then invalid.
Add a new SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk to allow this behaviour
to be enabled as required. Note that an additional workaround is required for
the previous SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR quirk which must never
return a block descriptor even though the DBD bit is left unset.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One of the mechanisms MacOS uses to identify CDROM drives compatible with MacOS
is to send a custom MODE SELECT command for page 0x30 to the drive. The
response to this is a hard-coded manufacturer string which must match in order
for the CDROM to be usable within MacOS.
Add an implementation of the MODE SELECT page 0x30 response guarded by a newly
defined SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR quirk bit so that CDROM drives
attached to non-Apple machines function exactly as before.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the MacOS SCSI implementation is quite old (and Apple added some firmware
customisations to their drives for m68k Macs) there is need to add a mechanism
to correctly handle Apple-specific quirks.
Add a new quirks bitmap to SCSIDiskState that can be used to enable these
features as required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set current_req to NULL, not current_req->req, to prevent reusing a free'd
buffer in case of repeated SCSI cancel requests. Also apply the fix to
CLEAR QUEUE and BUS DEVICE RESET messages as well, since they also cancel
the request.
Thanks to Alexander Bulekov for providing a reproducer.
Fixes: CVE-2022-0216
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220711123316.421279-1-mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set current_req->req to NULL to prevent reusing a free'd buffer in case of
repeated SCSI cancel requests. Thanks to Thomas Huth for suggesting the patch.
Fixes: CVE-2022-0216
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220705200543.2366809-1-mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inspired by Julia Lawall's fixing of Linux
kernel comments, I looked at qemu, although I did it manually.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-2-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 1b7fd72955 ("block: rename buffer_alignment to
guest_block_size") noted:
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
The last time the value of buffer_alignment/guest_block_size was
actually used was before commit 339064d506 ("block: Don't use guest
sector size for qemu_blockalign()").
This value has not been used since 2013. Get rid of it.
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220518130945.2657905-1-stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
=LXG0
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently vhost-user-scsi driver doesn't allow to change
the configuration space of virtio_scsi, while vhost-user-blk
support that, so here we set the flag in vhost-user-blk driver
and unset it in vhost-user-scsi.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Message-Id: <20220525125540.50979-2-changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.
Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch drops the name parameter for the virtio_init function.
The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.
This patch lets us do this and removes the need for the name
parameter in the virtio_init function.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.
Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.
Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no longer a need to expose the request and related APIs in
virtio-scsi.h since there are no callers outside virtio-scsi.c.
Note the block comment in VirtIOSCSIReq has been adjusted to meet the
coding style.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_cmd_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_ctrl_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_event_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-scsi event virtqueue is not emptied by its handler function.
This is typical for rx virtqueues where the device uses buffers when
some event occurs (e.g. a packet is received, an error condition
happens, etc).
Polling non-empty virtqueues wastes CPU cycles. We are not waiting for
new buffers to become available, we are waiting for an event to occur,
so it's a misuse of CPU resources to poll for buffers.
Introduce the new virtio_queue_aio_attach_host_notifier_no_poll() API,
which is identical to virtio_queue_aio_attach_host_notifier() except
that it does not poll the virtqueue.
Before this patch the following command-line consumed 100% CPU in the
IOThread polling and calling virtio_scsi_handle_event():
$ qemu-system-x86_64 -M accel=kvm -m 1G -cpu host \
--object iothread,id=iothread0 \
--device virtio-scsi-pci,iothread=iothread0 \
--blockdev file,filename=test.img,aio=native,cache.direct=on,node-name=drive0 \
--device scsi-hd,drive=drive0
After this patch CPU is no longer wasted.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20220427143541.119567-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit f34e8d8b8d ("virtio-scsi: prepare
virtio_scsi_handle_cmd for dataplane") prepared the virtio-scsi cmd
virtqueue handler function to be used in both the dataplane and
non-datpalane code paths.
It failed to convert the ctrl and event virtqueue handler functions,
which are not designed to be called from the dataplane code path but
will be since the ioeventfd is set up for those virtqueues when
dataplane starts.
Convert the ctrl and event virtqueue handler functions now so they
operate correctly when called from the dataplane code path. Avoid code
duplication by extracting this code into a helper function.
Fixes: f34e8d8b8d ("virtio-scsi: prepare virtio_scsi_handle_cmd for dataplane")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-2-stefanha@redhat.com
[Fixed s/by used/be used/ typo pointed out by Michael Tokarev
<mjt@tls.msk.ru>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"0x%u" format is very misleading, replace by "0x%x".
Found running:
$ git grep -E '0x%[0-9]*([lL]*|" ?PRI)[dDuU]' hw/
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220323114718.58714-3-philippe.mathieu.daude@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since PDMA reads/writes are driven by the guest, it is possible that migration
can occur whilst a SCSIRequest is still active. Fortunately active SCSIRequests
are already included in the migration stream and restarted post migration but
this still leaves the reference in ESPState uninitialised.
Implement the SCSIBusInfo .load_request callback to obtain a reference to the
currently active SCSIRequest and use it to recreate ESPState current_req
after migration.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This involves (re)adding a PDMA-specific subsection to hold the reference to the
current PDMA callback.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This prepares for the inclusion of the current PDMA callback in the migration
stream since the callback is referenced by an integer instead of a function
pointer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is to be used to execute the current PDMA callback rather than
dereferencing the ESPState pdma_cb function pointer directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is to be used to set the current PDMA callback rather than
accessing the ESPState pdma_cb function pointer directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
The "hardware version" machinery (qemu_set_hw_version(),
qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer
than 10 files. Move it out from osdep.h into a new
qemu/hw-version.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.
This commit was created with:
git grep -z -l 'static TypeInfo' -- '*.c' | \
xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
-----BEGIN PGP SIGNATURE-----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=F/ek
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging
Migration Pull request (Take 2)
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
migration: Move temp page setup and cleanup into separate functions
migration: Simplify unqueue_page()
migration: Add postcopy_has_request()
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
migration: No off-by-one for pss->page update in host page size
migration: Tally pre-copy, downtime and post-copy bytes independently
migration: Introduce ram_transferred_add()
migration: Don't return for postcopy_send_discard_bm_ram()
migration: Drop return code for disgard ram process
migration: Do chunk page in postcopy_each_ram_send_discard()
migration: Drop postcopy_chunk_hostpages()
migration: Don't return for postcopy_chunk_hostpages()
migration: Drop dead code of ram_debug_dump_bitmap()
migration/ram: clean up unused comment.
migration: Report the error returned when save_live_iterate fails
migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
migration/migration.c: Avoid COLO boot in postcopy migration
migration/migration.c: Add missed default error handler for migration state
Remove unnecessary minimum_version_id_old fields
multifd: Rename pages_used to normal_pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.
Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.
The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since commit 292e13142d, dma_buf_rw() returns a MemTxResult type.
Do not discard it, return it to the caller. Pass the previously
returned value (the QEMUSGList residual size, which was rarely used)
as an optional argument.
With this new API, SCSIRequest::residual might now be accessed via
a pointer. Since the size_t type does not have the same size on
32 and 64-bit host architectures, convert it to a uint64_t, which
is big enough to hold the residual size, and the type is constant
on both 32/64-bit hosts.
Update the few dma_buf_read() / dma_buf_write() callers to the new
API.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
