Of the 3 virtqueues, seabios only sets cmd, leaving ctrl
and event without a physical address. This can cause
vhost_verify_ring_part_mapping to return ENOMEM, causing
the following logs:
qemu-system-x86_64: Unable to map available ring for ring 0
qemu-system-x86_64: Verify ring failure on region 0
The qemu commit e6cc11d64f
has already resolved the issue for vhost scsi devices but
the fix was never applied to vhost-user scsi devices.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com
Message-Id: <1560299717-177734-1-git-send-email-raphael.norwitz@nutanix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tests/test-bdrv-drain /bdrv-drain/iothread/drain test case does the
following:
1. The preadv coroutine calls aio_bh_schedule_oneshot() and then yields.
2. The one-shot BH executes in another AioContext. All it does is call
aio_co_wakeup(preadv_co).
3. The preadv coroutine is re-entered and returns.
There is a race condition in aio_co_wake() where the preadv coroutine
returns and the test case destroys the preadv IOThread. aio_co_wake()
can still be running in the other AioContext and it performs an access
to the freed IOThread AioContext.
Here is the race in aio_co_schedule():
QSLIST_INSERT_HEAD_ATOMIC(&ctx->scheduled_coroutines,
co, co_scheduled_next);
<-- race: co may execute before we invoke qemu_bh_schedule()!
qemu_bh_schedule(ctx->co_schedule_bh);
So if co causes ctx to be freed then we're in trouble. Fix this problem
by holding a reference to ctx.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20190723190623.21537-1-stefanha@redhat.com
Message-Id: <20190723190623.21537-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Skip the tests if socket_check_protocol_support() failed, but do run
g_test_run() to keep TAP harness happy.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
getaddrinfo() may succeed with PF_UNSPEC, but fail when more specific.
(this allows to skip some tests that would fail under podman)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Allow to specify the container engine to run with ENGINE variable.
By default, ENGINE=auto and will select either podman or docker.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a --engine option to select either docker, podman or auto.
Among other advantages, podman allows to run rootless & daemonless
containers, fortunately sharing compatible CLI with docker.
With current podman, we have to use a uidmap trick in order to be able
to rw-share the ccache directory with the container user.
With a user 1000, the default mapping is: 1000 (host) -> 0 (container).
So write access to /var/tmp/ccache ends will end with permission
denied error.
With "--uidmap 1000:0:1 --uidmap 0:1:1000", the mapping is:
1000 (host) -> 0 (container, 1st namespace) -> 1000 (container, 2nd namespace).
(the rest is mumbo jumbo to avoid holes in the range of UIDs)
A future podman version may have an option such as --userns-keep-uid.
Thanks to Debarshi Ray <rishi@redhat.com> for the help!
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(podman will need further tweaks)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Factor it out, add a comment how it all works, and also use it in the
REAL MMU.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Any access sets the reference bit. In case we have a read-fault, we
should not allow writes to the TLB entry if the change bit was not
already set.
This is a preparation for proper storage-key reference/change bit handling
in TCG and a fix for KVM whereby read accesses would set the change
bit (old KVM versions without the ioctl to carry out the translation).
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Whenever we modify a storage key, we should flush the TLBs of all CPUs,
so the MMU fault handling code can properly consider the changed storage
key (to e.g., properly set the reference and change bit on the next
accesses).
These functions are barely used in modern Linux guests, so the performance
implications are neglectable for now.
This is a preparation for better reference and change bit handling for
TCG, which will require more MMU changes.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-5-david@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Instructions are always fetched from primary address space, except when
in home address mode. Perform the selection directly in cpu_mmu_index().
get_mem_index() is only used to perform data access, instructions are
fetched via cpu_lduw_code(), which translates to cpu_mmu_index(env, true).
We don't care about restricting the access permissions of the TLB
entries anymore, as we no longer enter PRIMARY entries into the
SECONDARY MMU. Cleanup related code a bit.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190816084708.602-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's select the ASC before calling the function. This is a prepararion
to remove the ASC magic depending on the access mode from mmu_translate.
There is currently no way to distinguish if we have code or data access.
For now, we were using code access, because especially when debugging with
the gdbstub, we want to read and disassemble what we single-step.
Note: KVM guest can now no longer be crashed using qmp/hmp/gdbstub if they
happen to be in AR mode.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to trace the actual return value, not "0".
Fixes: 0f5f669147 ("s390x: Enable new s390-storage-keys device")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Wrong order of operands. The constant always comes last. Makes QEMU crash
reliably on specific git fetch invocations.
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190814151242.27199-1-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Fixes: 5c4b0ab460 ("s390x/tcg: Implement VECTOR ELEMENT ROTATE AND INSERT UNDER MASK")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
we now fetch 2 bytes first, check whether we have a 32 bit insn, and only then
fetch another 2 bytes. We also make sure that a 16 bit insn that still fits
into the current page does not end up in the next page.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
this helper is only used to raise qemu specific exceptions. We use this
helper to raise it on breakpoints.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
otherwise we have to pass env down through all functions which blocks
the usage of translator_loop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
this gets rid of the copied fields of TriCore's DisasContext and now
uses the shared DisasContextBase, which is necessary for the conversion
to translate_loop.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Simplify cleanup paths by using glib's auto cleanup macros for stack
variables, allowing several goto jumps / labels to be eliminated.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Allow crypto structs to be used with g_autoptr, avoiding the need to
explicitly call XXX_free() functions when variables go out of scope on
the stack.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Per supported platforms doc[1], the various min glib on relevant distros is:
RHEL-8: 2.56.1
RHEL-7: 2.50.3
Debian (Buster): 2.58.3
Debian (Stretch): 2.50.3
OpenBSD (Ports): 2.58.3
FreeBSD (Ports): 2.56.3
OpenSUSE Leap 15: 2.54.3
SLE12-SP2: 2.48.2
Ubuntu (Xenial): 2.48.0
macOS (Homebrew): 2.56.0
This suggests that a minimum glib of 2.48 is a reasonable target.
Compared to the previous version bump in
commit e7b3af8159
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri May 4 15:34:46 2018 +0100
glib: bump min required glib library version to 2.40
This will result in us dropping support for Debian Jessie and
Ubuntu 14.04.
As per the commit message 14.04 was already outside our list
of supported build platforms and an exception was only made
because one of the build hosts used during merge testing was
stuck on 14.04.
Debian Jessie is justified to drop because we only aim to
support at most 2 major versions of Debian at any time. This
means Buster and Stretch at this time.
The g_strv_contains compat code is dropped as this API is
present since 2.44
The g_assert_cmpmem compat code is dropped as this API is
present since 2.46
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The MacOS driver exits if the card does not have an interrupt. If we
set PCI_INTERRUPT_PIN to 1 then it enables VBlank interrupts and it
boots but the mouse pointer cannot be moved. This patch implements a
dummy VBlank interrupt triggered by a 60 Hz timer. With this the
pointer now moves but MacOS still hangs somewhere before completely
finishing boot.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <89364275f2fb5f85ee73c0e76528aa91691a499a.1565907489.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In case we don't have a device for an active queue, just skip
processing the queue (same we do for inactive queues) and log
a guest bug.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20190821085319.13711-1-kraxel@redhat.com
Commit 4eaca8de26 dropped monitor_qmp_respond()'s parameter @id
without updating its function comment. Fix that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190816193305.12090-1-armbru@redhat.com>
There's a race condition in which the tcp_chr_read() ioc handler can
close a connection that is being written to from another thread.
Running iotest 136 in a loop triggers this problem and crashes QEMU.
(gdb) bt
#0 0x00005558b842902d in object_get_class (obj=0x0) at qom/object.c:860
#1 0x00005558b84f92db in qio_channel_writev_full (ioc=0x0, iov=0x7ffc355decf0, niov=1, fds=0x0, nfds=0, errp=0x0) at io/channel.c:76
#2 0x00005558b84e0e9e in io_channel_send_full (ioc=0x0, buf=0x5558baf5beb0, len=138, fds=0x0, nfds=0) at chardev/char-io.c:123
#3 0x00005558b84e4a69 in tcp_chr_write (chr=0x5558ba460380, buf=0x5558baf5beb0 "...", len=138) at chardev/char-socket.c:135
#4 0x00005558b84dca55 in qemu_chr_write_buffer (s=0x5558ba460380, buf=0x5558baf5beb0 "...", len=138, offset=0x7ffc355dedd0, write_all=false) at chardev/char.c:112
#5 0x00005558b84dcbc2 in qemu_chr_write (s=0x5558ba460380, buf=0x5558baf5beb0 "...", len=138, write_all=false) at chardev/char.c:147
#6 0x00005558b84dfb26 in qemu_chr_fe_write (be=0x5558ba476610, buf=0x5558baf5beb0 "...", len=138) at chardev/char-fe.c:42
#7 0x00005558b8088c86 in monitor_flush_locked (mon=0x5558ba476610) at monitor.c:406
#8 0x00005558b8088e8c in monitor_puts (mon=0x5558ba476610, str=0x5558ba921e49 "") at monitor.c:449
#9 0x00005558b8089178 in qmp_send_response (mon=0x5558ba476610, rsp=0x5558bb161600) at monitor.c:498
#10 0x00005558b808920c in monitor_qapi_event_emit (event=QAPI_EVENT_SHUTDOWN, qdict=0x5558bb161600) at monitor.c:526
#11 0x00005558b8089307 in monitor_qapi_event_queue_no_reenter (event=QAPI_EVENT_SHUTDOWN, qdict=0x5558bb161600) at monitor.c:551
#12 0x00005558b80896c0 in qapi_event_emit (event=QAPI_EVENT_SHUTDOWN, qdict=0x5558bb161600) at monitor.c:626
#13 0x00005558b855f23b in qapi_event_send_shutdown (guest=false, reason=SHUTDOWN_CAUSE_HOST_QMP_QUIT) at qapi/qapi-events-run-state.c:43
#14 0x00005558b81911ef in qemu_system_shutdown (cause=SHUTDOWN_CAUSE_HOST_QMP_QUIT) at vl.c:1837
#15 0x00005558b8191308 in main_loop_should_exit () at vl.c:1885
#16 0x00005558b819140d in main_loop () at vl.c:1924
#17 0x00005558b8198c84 in main (argc=18, argv=0x7ffc355df3f8, envp=0x7ffc355df490) at vl.c:4665
This patch adds a lock to protect tcp_chr_disconnect() and
socket_reconnect_timeout()
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1565625509-404969-3-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After g_source_attach() the GMainContext holds a reference to the
GSource, so the caller does not need to keep it.
qio_task_thread_worker() is not releasing its reference so the GSource
is being leaked since a17536c594.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <1565625509-404969-2-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old memory_region_{add|clear}_coalescing() has some defects
because they both changed mr->coalesced before updating the regions
using memory_region_update_coalesced_range_as(). Then when the
regions were updated in memory_region_update_coalesced_range_as() the
mr->coalesced will always be either one more or one less. So:
- For memory_region_add_coalescing: it'll always trying to remove the
newly added coalesced region while it shouldn't, and,
- For memory_region_clear_coalescing: when it calls the update there
will be no coalesced ranges on mr->coalesced because they were all
removed before hand so the update will probably do nothing for real.
Let's fix this. Now we've got flat_range_coalesced_io_notify() to
notify a single CoalescedMemoryRange instance change, so use it in the
existing memory_region_update_coalesced_range() logic by only notify
either an addition or deletion. Then we hammer both the
memory_region_{add|clear}_coalescing() to use it.
Fixes: 3ac7d43a6f
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190820141328.10009-5-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The has_coalesced_range could potentially be problematic in that it
only works for additions of coalesced mmio ranges but not deletions.
The reason is that has_coalesced_range information can be lost when
the FlatView updates the topology again when the updated region is not
covering the coalesced regions. When that happens, due to
flatrange_equal() is not checking against has_coalesced_range, the new
FlatRange will be seen as the same one as the old and the new
instance (whose has_coalesced_range will be zero) will replace the old
instance (whose has_coalesced_range _could_ be non-zero).
The counter was originally used to make sure every FlatRange will only
notify once for coalesced_io_{add|del} memory listeners, because each
FlatRange can be used by multiple address spaces, so logically
speaking it could be called multiple times. However we should not
limit that, because memory listeners should will only be registered
with specific address space rather than multiple address spaces.
So let's fix this up by simply removing the whole has_coalesced_range.
Fixes: 3ac7d43a6f
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190820141328.10009-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is a workaround of current KVM's KVM_UNREGISTER_COALESCED_MMIO
interface. The kernel interface only allows to unregister an mmio
device with exactly the zone size when registered, or any smaller zone
that is included in the device mmio zone. It does not support the
userspace to specify a very large zone to remove all the small mmio
devices within the zone covered.
Logically speaking it would be nicer to fix this from KVM side, though
in all cases we still need to coop with old kernels so let's do this.
Fixes: 3ac7d43a6f
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190820141328.10009-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Removing the update variable and quit earlier if the memory region has
no coalesced range. This prepares for the next patch.
Fixes: 3ac7d43a6f
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190820141328.10009-4-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu in general doesn't define CONFIG_FOO if it's false. This also
helps with the dumb kconfig parser from meson, as source_set considers
any non-empty value as true.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a left-over from commit
c12b6d70e3 ("pixman: drop submodule")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test will simply check that modules can be loaded, and no symbols
are missing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let the caller know of load success.
Note that this also changes slightly the behaviour of the function to
try loading on subsequent calls if the previous ones failed.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hashtable is used like a set, use the convenience
g_hash_table_add() function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Defining CONFIG_TOOLS on the basis of $(TOOLS) has the disadvantage
of including it also if e.g. qemu-ga is requested. The correct
information is available in configure, define it there.
This also has the benefit of not installing the manpages for block layer
tools if the only "tool" being built is the guest agent.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-ga is included in the TOOLS variable without the .exe suffix, and this is
then worked around twice in the Makefile. Do the right thing in configure
instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KtI3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/audio-20190821-pull-request' into staging
audio: second batch of -audiodev support, adding support for multiple backends.
# gpg: Signature made Wed 21 Aug 2019 09:40:37 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/audio-20190821-pull-request:
audio: fix memory leak reported by ASAN
audio: use size_t where makes sense
audio: remove read and write pcm_ops
paaudio: fix playback glitches
audio: do not run each backend in audio_run
audio: remove audio_MIN, audio_MAX
paaudio: properly disconnect streams in fini_*
paaudio: do not move stream when sink/source name is specified
audio: audiodev= parameters no longer optional when -audiodev present
paaudio: prepare for multiple audiodev
audio: add audiodev properties to frontends
audio: add audiodev property to vnc and wav_capture
audio: basic support for multi backend audio
audio: reduce glob_audio_state usage
audio: Add missing fall through comments
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
-----BEGIN PGP SIGNATURE-----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=E+7d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20190821' into staging
ppc patch queue for 2019-08-21
First ppc and spapr pull request for qemu-4.2. Includes:
* Some TCG emulation fixes and performance improvements
* Support for the mffsl instruction in TCG
* Added missing DPDES SPR
* Some enhancements to the emulation of the XIVE interrupt
controller
* Cleanups to spapr MSI management
* Some new suspend/resume infrastructure and a draft suspend
implementation for spapr
* New spapr hypercall for TPM communication (will be needed for
secure guests under an Ultravisor)
* Fix several memory leaks
And a few other assorted fixes.
# gpg: Signature made Wed 21 Aug 2019 08:24:44 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20190821: (42 commits)
ppc: Fix emulated single to double denormalized conversions
ppc: Fix emulated INFINITY and NAN conversions
ppc: conform to processor User's Manual for xscvdpspn
ppc: Add support for 'mffsl' instruction
target/ppc: Add Directed Privileged Door-bell Exception State (DPDES) SPR
spapr/xive: Mask the EAS when allocating an IRQ
spapr: Implement better workaround in spapr-vty device
spapr/irq: Drop spapr_irq_msi_reset()
spapr/pci: Free MSIs during reset
spapr/pci: Consolidate de-allocation of MSIs
ppc: remove idle_timer logic
spapr: Implement ibm,suspend-me
i386: use machine class ->wakeup method
machine: Add wakeup method to MachineClass
ppc/xive: Improve 'info pic' support
ppc/xive: Provide silent escalation support
ppc/xive: Provide unconditional escalation support
ppc/xive: Provide escalation support
ppc/xive: Provide backlog support
ppc/xive: Implement TM_PULL_OS_CTX special command
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move hmp_device_add(), hmp_device_del() from monitor/hmp-cmds.c to
qdev-monitor.c, where they are covered by MAINTAINERS section "QOM",
just like qapi/qdev.json. hmp_info_qtree() and hmp_info_qdm() are
already there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709185936.31335-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Move query-target and its return type TargetInfo from misc.json to
machine.json, where they are covered by MAINTAINERS section "Machine
core". Also move its implementation from arch_init.c to
hw/core/machine-qmp-cmds, where it is likewise covered.
All users of SysEmuTarget are now in machine.json. Move it there from
common.json.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-3-armbru@redhat.com>
