The MacOS driver exits if the card does not have an interrupt. If we
set PCI_INTERRUPT_PIN to 1 then it enables VBlank interrupts and it
boots but the mouse pointer cannot be moved. This patch implements a
dummy VBlank interrupt triggered by a 60 Hz timer. With this the
pointer now moves but MacOS still hangs somewhere before completely
finishing boot.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <89364275f2fb5f85ee73c0e76528aa91691a499a.1565907489.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set frame buffer endianness according to requested endianness for
frame buffer apertures. We set frame buffer to big endian if any of
the two apertures are set to big endian. Using different endianness
for the two apertures is not implemented. This fixes inverted colors
with MacOS and Xorg frame buffer driver but some Linux drivers may
have endianness issues even on real hardware so this may not fix all
cases. MorphOS uses aper0 in LE, Linux uses aper0 in BE and MacOS uses
aper1 in BE but not sure about others or if MacOS also may need aper0
in which case we'll need a more complex fix but MacOS has other
problems yet so for now this might work.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e2a7ec7af3fc30523213bcd27832ccad34323f2c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the bitbang_i2c_init() function allocates a
bitbang_i2c_interface struct which it returns. This is unfortunate
because it means that if the function is used from a DeviceState
init method then the memory will be leaked by an "init then delete"
cycle, as used by the qmp/hmp commands that list device properties.
Since three out of four of the uses of this function are in
device init methods, switch the function to do an in-place
initialization of a struct that can be embedded in the
device state struct of the caller.
This fixes LeakSanitizer leak warnings that have appeared in the
patchew configuration (which only tries to run the sanitizers
for the x86_64-softmmu target) now that we use the bitbang-i2c
code in an x86-64 config.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702163844.20458-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix bit masks of registers for offset and pitch and also handle
default values for both R128P and RV100. This improves picture a bit
but does not resolve all problems yet so there might be some more bugs
somewhere.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190624100005.7A1CA746395@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds DDC support to ati-vga and connects i2c-ddc to it. This
allows at least MacOS with an ATI ndrv, Linux radeonfb and MorphOS to
get monitor EDID info (although MorphOS splash screen is not displayed
and radeonfb needs additional tables from vgabios-rv100). Xorg needs
additional support from VESA vgabios, it's missing INT10 0x4F15
function (see
https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/vbe/vbe.c)
without which no DDC is available that also prevents loading the
accelerated X driver.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 046ddebb7ec8db48c4e877ee444ec1c41e385a74.1561028123.git.balaton@eik.bme.hu
ati-vga: Clarify comment
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620195213.C54127461AE@zero.eik.bme.hu
ati-vga: Add DDC reg names for debug
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190621181459.2F8207462AA@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
slirp/src/*
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
We're in the process of spinning out slirp/. tests/fp/platform.h is
has to include qemu/osdep.h because tests/fp/berkeley-softfloat-3/ and
tests/fp/berkeley-testfloat-3/ don't. tests/uefi-test-tools/ is guest
software. The remaining reverts are the same as in commit
b7d89466dd.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313162812.8885-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Revert change to tests/fp/platform.h, adjust commit message]
At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI
gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and
guests running on these and the PMON2000 firmware of the fulong2e
expect this to be available. Fortunately these are very similar chips
so they can be mostly emulated in the same device model. This patch
adds basic emulation of these ATI VGA chips.
While this is incomplete and currently only enough to run the MIPS
firmware and get framebuffer output with Linux, it allows the fulong2e
board to work more like the real hardware and having it in QEMU in
this state provides a way to experiment with it and allows others to
contribute to improve it. It is compiled for all archs but only the
fulong2e (which currently has no display output at all) is set to use
it by default (in a separate patch).
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Message-id: 0b1b7c22873a6e37627261b04fb687412b25ff4f.1552152100.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
