tswapl() and bswaptls() are target-dependent and only used
by user emulation. Move their definitions to a new header:
"exec/user/tswap-target.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-17-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move tswap_siginfo from target code to handle_pending_signal. This will
allow some cleanups and having the siginfo ready to be used in gdbstub.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240309030901.1726211-3-gustavo.romero@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
A CPU's TaskState is stored in the CPUState's void *opaque field,
accessing which is somewhat awkward due to having to use a cast.
Introduce a wrapper and use it everywhere.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240219141628.246823-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-4-alex.bennee@linaro.org>
Add support in gen-vdso-elfn.c.inc for the DT_PPC64_OPT
dynamic tag: this is an integer, so does not need relocation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The bits in cr reg are grouped into eight 4-bit fields represented
by env->crf[8] and the related calculations should be abstracted to
keep the calling routines simpler to read. This is a step towards
cleaning up the related/calling code for better readability.
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503093619.2530487-2-harshpb@linux.ibm.com>
[danielhb: add 'const' modifier to fix linux-user build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Coverity warns that we shift a 32-bit value by N, and then
accumulate it into a 64-bit type (target_ulong on ppc64).
The ccr is always 8 * 4-bit fields, and thus is always a
32-bit quantity; narrow the type to avoid the warning.
Fixes: Coverity CID 1487223
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401191643.330393-1-richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.
Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
This value is fully internal to qemu, and so is not a TARGET define.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We should use cpu_read_xer/cpu_write_xer to save/restore the complete
register since some of its bits are in other fields of CPUPPCState. A
test is added to prevent future regressions.
Fixes: da91a00f19 ("target-ppc: Split out SO, OV, CA fields from XER")
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211014223234.127012-2-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Create and record the two signal trampolines.
Cc: qemu-ppc@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-20-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The sigret parameter is never 0, and even if it was the encoding
of the LI instruction would still work.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210929130553.121567-19-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In most cases we were already passing get_sp_from_cpustate
directly to the function. In other cases, we were passing
a local variable which already contained the same value.
In the rest of the cases, we were passing the stack pointer
out of env directly.
Reviewed by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Note that target_restore_altstack uses the host memory
pointer that we have already verified, so TARGET_EFAULT
is not a possible return value.
Note that using -EFAULT was a bug.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In save_user_regs, there are two bugs where we OR in a bit number
instead of the bit, clobbering the low bits of MSR. However:
The MSR_VR and MSR_SPE bits control the availability of the insns.
If the bits were not already set in MSR, then any attempt to access
those registers would result in SIGILL.
For linux-user, we always initialize MSR to the capabilities
of the cpu. We *could* add checks vs MSR where we currently
check insn_flags and insn_flags2, but we know they match.
Also, there's a stray cut-and-paste comment in restore.
Then, do not force little-endian binaries into big-endian mode.
Finally, use ppc_store_msr for the update to affect hflags.
Which is the reason none of these bugs were previously noticed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323184340.619757-10-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The padding that was added in 95cda4c44e was added to a union,
and so it had no effect. This fixes misalignment errors detected
by clang sanitizers for ppc64 and ppc64le.
In addition, only ppc64 allocates space for VSX registers, so do
not save them for ppc32. The kernel only has references to
CONFIG_SPE in signal_32.c, so do not attempt to save them for ppc64.
Fixes: 95cda4c44e
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200407032105.26711-1-richard.henderson@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Previously, the signal handler would be byte swapped if the target and
host CPU used different endianness. This would cause a SIGSEGV when
attempting to translate the opcode pointed to by the swapped address.
Thread 1 "qemu-ppc64" received signal SIGSEGV, Segmentation fault.
0x00000000600a9257 in ldl_he_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:351
351 __builtin_memcpy(&r, ptr, sizeof(r));
#0 0x00000000600a9257 in ldl_he_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:351
#1 0x00000000600a92fe in ldl_be_p (ptr=0x4c2c061000000000) at qemu/include/qemu/bswap.h:449
#2 0x00000000600c0790 in translator_ldl_swap at qemu/include/exec/translator.h:201
#3 0x000000006011c1ab in ppc_tr_translate_insn at qemu/target/ppc/translate.c:7856
#4 0x000000006005ae70 in translator_loop at qemu/accel/tcg/translator.c:102
The signal handler will be byte swapped as a result of the __get_user()
call in sigaction() if it is necessary, no additional swap is required.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200319133244.8818-1-vfazio@xes-inc.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Copy syscall.tbl and syscallhdr.sh from linux/arch/ppc/kernel/syscalls v5.5
Update syscallhdr.sh to generate QEMU syscall_nr.h
and to not generate the entry if entry point is sys_ni_syscall.
Fix ppc/signal.c to define do_sigreturn() for TARGET_ABI32.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20200310103403.3284090-10-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We were incorrectly using the 64-bit AIX ABI instead of the 32-bit
SYSV ABI for setting NIP for the signal handler.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
The VSX register array is a block of 64 128-bit registers where the first 32
registers consist of the existing 64-bit FP registers extended to 128-bit
using new VSR registers, and the last 32 registers are the VMX 128-bit
registers as show below:
64-bit 64-bit
+--------------------+--------------------+
| FP0 | | VSR0
+--------------------+--------------------+
| FP1 | | VSR1
+--------------------+--------------------+
| ... | ... | ...
+--------------------+--------------------+
| FP30 | | VSR30
+--------------------+--------------------+
| FP31 | | VSR31
+--------------------+--------------------+
| VMX0 | VSR32
+-----------------------------------------+
| VMX1 | VSR33
+-----------------------------------------+
| ... | ...
+-----------------------------------------+
| VMX30 | VSR62
+-----------------------------------------+
| VMX31 | VSR63
+-----------------------------------------+
In order to allow for future conversion of VSX instructions to use TCG vector
operations, recreate the same layout using an aligned version of the existing
vsr register array.
Since the old fpr and avr register arrays are removed, the existing callers
must also be updated to use the correct offset in the vsr register array. This
also includes switching the relevant VMState fields over to using subarrays
to make sure that migration is preserved.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This allows the tests generated by debian-powerpc-user-cross
to function properly, especially tests/test-coroutine.
Technically this syscall is available to both ppc32 and ppc64,
but only ppc32 glibc actually uses it. Thus the ppc64 path is
untested.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180718200648.22529-1-richard.henderson@linaro.org>
No code change, only move code from signal.c to
ppc/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-20-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
