Implement the meat of the sigaltstack(2) system call with do_sigaltstack.
With that, all the stubbed out routines are complete, so remove
now-incorrect comment.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the meat of the sigaction(2) system call with do_sigaction and
helper routiner block_signals (which is also used to implemement signal
masking so it's global).
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implements the meat of a sigreturn(2) system call via do_sigreturn, and
helper reset_signal_mask. Fix the prototype of do_sigreturn in qemu.h
and remove do_rt_sigreturn since it's linux only.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Process the currently queued signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert siginfo from targer to host.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Handle a queued signal.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
setup_frame sets up a signalled stack frame. Associated routines to
extract the pointer to the stack frame and to support alternate stacks.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target_sigemptyset: resets a set to having no bits set
target_sigaddset: adds a signal to a set
target_sigismember: returns true when signal is a member
host_to_target_sigset_internal: convert host sigset to target
host_to_target_sigset: convert host sigset to target
target_to_host_sigset_internal: convert target sigset to host
target_to_host_sigset: convert target sigset to host
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in queue signal implementation, as well as routines allocate and
delete elements of the signal queue.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Force delivering a signal and generating a core file. It's a global
function for the moment...
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
print_taken_signal() prints signals when we're tracing signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_handler to handle signals generated by the host
and to do safe system calls.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement conversion of host to target siginfo.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the bsd-user specific events and infrastructure. Only include the
linux-user trace events for linux-user, not bsd-user.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Start to add the host signal functionality to the build.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
x86_64.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
i386.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement host_signal_pc, host_signal_set_pc and host_signal_write for
arm.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Mirror the linux-user practice and add a si_type argument to queue
signal. This will be transported as the upper 8 bits in the si_type
element of siginfo so that we know what bits of the structure are valid
and so we can properly implement host_to_target_siginfo_noswap and
tswap_siginfo. Adapt the one caller of queue_signal to the new
interface. Use all the same names as Linux (except _RT which we don't
treat differently, unlike Linux), though some are unused. Place this
into signal-common.h since that's a better place given bsd-user's
structure. Move prototype of queue_signal to signal-common.h to mirror
linux-user's location.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Initialize the signal state for the emulator. Setup a set of sane
default signal handlers, mirroring the host's signals. For fatal signals
(those that exit by default), establish our own set of signal
handlers. Stub out the actual signal handler we use for the moment.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> XXX SIGPROF PENDING
Implement host_to_target_signal and target_to_host_signal.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update for the richer set of data faults that are now possible. Copied
largely from linux-user/arm/cpu_loop.c, with minor typo fixes.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Use force_sig_fault to implement unknown opcode. This just uninlines
that function, so simplify things by using it. Fold in EXCP_NOCP and
EXCP_INVSTATE, as is done in linux-user. Make a note about slight
differences with FreeBSD in case any of them turn out to be important
later.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The code has moved in FreeBSD since the emulator was started, update the
comment to reflect that change.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement EXCP_DEBUG and EXCP_BKPT the same, as is done in
linux-user. The prior adjustment of register 15 isn't needed, so remove
that. Remove a redunant comment (that code in FreeBSD never handled
break points). It's unclear why BKPT was an alias for system calls,
but FreeBSD doesn't do that today.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
First attempt at implementing cpu_loop_exit_sigbus, mostly copied from
linux-user version of this function.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
First attempt at implementing cpu_loop_exit_sigsegv, mostly copied from
linux-user version of this function.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Start to implement the force_sig_fault code. This currently just calls
queue_signal(). The bsd-user fork version of that will handle this the
synchronous nature of this call. Add signal-common.h to hold signal
helper functions like force_sig_fault.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the EXCP_ATOMIC case to match linux-user/arm/cpu_loop.c:cpu_loop
ordering.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is currently unused, so no code adjustments are needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
bsd-user was copied from linux-user at a time when it queued
signals. Remove those vestiges of thse code. Retain the init function,
even though it's now empty since other stuff will likely be added
there. Make it static since it's not called from outside of main.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD's get_mcontext doesn't return any vfp data. Instead, it zeros
out the vfp feilds (and all the spare fields). Impelement this
behavior. We're still missing the sysarch(ARM_GET_VFPCONTEXT) syscall,
though.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fix the broken context setting for arm. FreeBSD's get_mcontext does not
fill in the vfp info. It's filled in in sigframe(). This corresponds to
the new setup_sigframe_arch which fills in mcontext, then adjusts it to
point to the vfp context in the sigframe and fills in that context as
well. Add pointer to where this code is done.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Define setup_sigframe_arch whose job it is to setup the mcontext for the
sigframe. Implement for x86 to just call mcontext.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the missing FreeBSD siginfo fields, and add some comments.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Avoid polluting the compilation of common-user/ with local include files;
making an include file available to common-user/ should be a deliberate
decision in order to keep a clear interface that can be used by both
bsd-user/ and linux-user/.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all architecutres define TARGET_[MU]CONTEXT_SIZE, enforce
requiring them and always check the sizeof target_{u,m}context_t
sizes.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update ucontext to implement sigreturn.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the machine context to the CPU state.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Get the machine context from the CPU state.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement set_sigtramp_args to setup the arguments to the sigtramp
calls.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Define the native sizes of mcontext_t and ucontext_t so that the tests
in target_os_ucontext.h ensure the size of arm's version of these
structures is correct.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Defines for registers and stack layout related to signals.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement get_elf_hwcap to get the first word of hardware capabilities.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Basic set of defines needed for arm ELF file activation.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement target_thread_init (to create a thread) and target_set_upcall
(to switch to a thread) for arm.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Copy of the signal trampoline code for arm, as well as setup_sigtramp to
write it to the stack.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Various parameters describing the layout of the ARM address space. In
addition, define routines to get the stack pointer and to set the second
return value.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the register copying routines to extract registers from the
cpu for core dump generation.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the system call dispatch. This implements all three kinds of
system call: direct and the two indirect variants. It handles all the
special cases for thumb as well.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement EXCP_PREFETCH_ABORT AND EXCP_DATA_ABORT. Both of these data
exceptions cause a SIGSEGV.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Olivier Houchard <cognet@ci0.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement EXCP_UDEF, EXCP_DEBUG, EXCP_INTERRUPT, EXCP_ATOMIC and
EXCP_YIELD. The first two generate a signal to the emulated
binary. EXCP_ATOMIC handles atomic operations. The remainder are fancy
nops.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a boiler plate CPU loop that does nothing except return an error for
all traps.
Signed-off-by: Sean Bruno <sbruno@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement target_cpu_clone_regs to clone the resister state on a fork.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
target_arch_cpu.h is for CPU loop definitions. Create the file and
define target_cpu_init and target_cpu_reset for arm.
Signed-off-by: Olivier Houchard <cognet@ci0.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Target specific TLS routines to get and set the TLS values.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The preferred name for the 32-bit arm is now armv7. Update the name to
reflect that. In addition, add Stacey's copyright to this file and
update the include guards to the new convention.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
As part of upstreaming, the include guards have been made more
consistent. Update this file to use the new guards.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Switch to the CPUArchState typedef and move target-provided prototypes
to target_os_ucontext.h.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the current inline functions into sigal.c. This will increate the
flexibility of implementation in the future.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in target_mcontext match the FreeBSD mcontext_t structure. Also
define the size correctly.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In FreeBSD, sigcontext was retired in favor of ucontext/mcontext.
Remove vestigial target_sigcontext.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the (now stubbed out) inlines into bsd-user/i386/signal.c.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Fill in target_mcontext_t to match the FreeBSD mcontex_t. Also tag the
current size of mcontext and ucontext to enable size checking for i386.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In FreeBSD, sigcontext was retired in favor of ucontext/mcontext.
Remove vestigial target_sigcontext.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Create a place-holder signal.c file for each of the architectures that
are currently built. In the future, some code that's currently inlined
in target_arch_signal.h will live here.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD has a MI ucontext structure that contains the MD mcontext
machine state and other things that are machine independent. Create an
include file for all the ucontext stuff. It needs to be included in the
arch specific files after target_mcontext is defined. This is largely
copied from sys/_ucontext.h with the comments about layout removed
because we don't support ancient FreeBSD binaries.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD is dropping support for mips starting with FreeBSD 14. mips
support has been removed from the bsd-user fork because updating it for
new signal requirements will take too much time. Remove it here since it
is a distraction.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
We have no need to reference bsd_user_ss outside of bsd-user.
Go ahead and merge it directly into specific_ss.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move linux-user safe-syscall.S and safe-syscall-error.c to common-user
so that bsd-user can also use it. Also move safe-syscall.h to
include/user/. Since there is nothing here that is related to the guest,
as opposed to the host, build it once.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pull the internal errno used by qemu internally its own
header file, for use by safe-syscall.S.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This value is fully internal to qemu, and so is not a TARGET define.
We use this as an extra marker for both host and target errno.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Until the signal support is merged from the bsd-user fork, we need stubs
for cpu_loop_exit_sigsegv and cpu_loop_exit_sigbus to link. These call
abort after logging a message. Since singals aren't supported here
yet, this is sufficient.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20211102225248.52999-2-imp@bsdimp.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create dummy signal queueing function so we can start to integrate other
architectures (at the cost of signals remaining broken) to tame the
dependency graph a bit and to bring in signals in a more controlled
fashion. Log unimplemented events to it in the mean time.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
To avoid a name clash with FreeBSD's sigqueue data structure in
signalvar.h, rename sigqueue to qemu_sigqueue. This structure
is currently defined, but unused.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
do_freebsd_arch_sysarch() exists in $ARCH/target_arch_sysarch.h for x86.
Call it from do_freebsd_sysarch() and remove the mostly duplicate
version in syscall.c. Future changes will move it to os-sys.c and
support other architectures.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Similar to the same function in linux-user: this stops all the current tasks.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
The 'used' field in TaskState is write only. Remove it from TaskState.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Some architectures publish AT_HWCAP2 as well as AT_HWCAP. Those
architectures will define ELF_HWCAP2 in their target_arch_elf.h files
for the value for this process. If it is defined, then publish it.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
All architectures have a ELF_HWCAP, so remove the fallback ifdef.
Place ELF_HWCAP in the same order as on native FreeBSD.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Move TARGET_MC_GET_CLEAR_RET to freebsd/target_os_signal.h since it's
architecture agnostic on FreeBSD.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
To emulate signals and interrupted system calls, we need to have the
same mechanisms we have in the kernel, including these errno values.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Make get_errno and is_error global so files other than syscall.c can use
them.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
To increase flexibility, only descend into *-user when that is
configured. This allows *-user to selectively include directories based
on the host OS which may not exist on all hosts. Adopt Paolo's
suggestion of checking the configuration in the directories that know
about the configuration.
Message-Id: <20210926220103.1721355-2-f4bug@amsat.org>
Message-Id: <20210926220103.1721355-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Warner Losh <wlosh@bsdimp.com>
Acked-by: Paolo Bonzini <pbonzinni@redhat.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Similar to the equivalent linux-user change 86abac06c1. All error
conditions that target_mprotect checks are also checked by target_mmap.
EACCESS cannot happen because we are just removing PROT_WRITE. ENOMEM
should not happen because we are modifying a whole VMA (and we have
bigger problems anyway if it happens).
Fixes a Coverity false positive, where Coverity complains about
target_mprotect's return value being passed to tb_invalidate_phys_range.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
jemalloc requires a working MAP_EXCL. Ensure that no page is double
mapped when specified. In addition, use guest_range_valid_untagged to
test for valid ranges of pages rather than an incomplete inlined version
of the test that might be wrong.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Switch checks for !(flags & MAP_ANONYMOUS) with checks for fd != -1.
MAP_STACK and MAP_GUARD both require fd == -1 and don't require mapping
the fd either. Add analysis from Guy Yur detailing the different cases
for MAP_GUARD and MAP_STACK.
Signed-off-by: Guy Yur <guyyur@gmail.com>
[ partially merged before, finishing the job and documenting origin]
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
MAP_ANON and MAP_ANONYMOUS are identical. Prefer MAP_ANON for BSD since
the file is now a confusing mix of the two.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
mmap should return ENOMEM on len overflow rather than EINVAL. Return
EINVAL when len == 0 and ENOMEM when the rounded to a page length is 0.
Found by make check-tcg.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
All these MAP_ symbols are always defined on supported FreeBSD versions
(12.2 and newer), so remove the #ifdefs since they aren't needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
