Now that do have a nicer interface to work against we can add Linux native
AIO support. It's an extremly thing layer just setting up an iocb for
the io_submit system call in the submission path, and registering an
eventfd with the qemu poll handler to do complete the iocbs directly
from there.
This started out based on Anthony's earlier AIO patch, but after
estimated 42,000 rewrites and just as many build system changes
there's not much left of it.
To enable native kernel aio use the aio=native sub-command on the
drive command line. I have also added an option to qemu-io to
test the aio support without needing a guest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The VM state offset is a concept internal to the image format. Replace
the old bdrv_{get,put}_buffer method that require an index into the
image file that is constructed from the VM state offset and an offset
into the vmstate with the bdrv_{load,save}_vmstate that just take an
offset into the VM state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The performance of qcow2 has improved meanwhile, so we don't need to
special-case it any more. Switch the default to write-through caching
like all other block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Problem: It is impossible to feed filenames with the character colon because
qemu interprets such names as a protocol. For example filename scsi:0, is
interpreted as a protocol by name "scsi".
This patch allows user to espace colon characters. For example the above
filename can now be expressed either as 'scsi\:0' or as file:scsi:0
anything following the "file:" tag is interpreted verbatin. However if "file:"
tag is omitted then any colon characters in the string must be escaped using
backslash.
Here are couple of examples:
scsi\:0\:abc is a local file scsi:0:abc
http\://myweb is a local file by name http://myweb
file:scsi:0:abc is a local file scsi:0:abc
file:http://myweb is a local file by name http://myweb
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Section 10.8.25 ("START/STOP UNIT Command") of SFF-8020i states that
if the device is locked we should refuse to eject if the device is
locked.
ASC_MEDIA_REMOVAL_PREVENTED is the appropriate return in this case.
In order to stop itself from ejecting the media it is running from,
Fedora's installer (anaconda) requires the CDROMEJECT ioctl() to fail
if the drive has been previously locked.
See also https://bugzilla.redhat.com/501412
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we can make use of the newly introduced option structures. Instead of
having bdrv_create carry more and more parameters (which are format specific in
most cases), just pass a option structure as defined by the driver itself.
bdrv_create2() contains an emulation of the old interface to simplify the
transition.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
From: Kevin Wolf <kwolf@redhat.com>
Introduce a new bdrv_check function pointer for block drivers. Modify qcow2 to
return an error status in check_refcounts(), so it can implement bdrv_check.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7214 c046a42c-6fe2-441c-8c8c-71466251a162
Always use the vectored APIs to reduce code churn once we switch the BlockDriver
API to be vectored.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7019 c046a42c-6fe2-441c-8c8c-71466251a162
We now enforce that you cannot write beyond the end of a non-growable file.
qcow2 files are not growable but we rely on them being growable to do
savevm/loadvm. Temporarily allow them to be growable by introducing a new
API specifically for savevm read/write operations.
Reported-by: malc
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6994 c046a42c-6fe2-441c-8c8c-71466251a162
Added a backing_format field to BlockDriverState.
Added bdrv_create2 and drv->bdrv_create2 to create an image with
a known backing file format.
Upon bdrv_open2 if backing format is known use it, instead of
probing the (backing) image.
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6908 c046a42c-6fe2-441c-8c8c-71466251a162
Okay, I started looking into how to handle scsi-generic I/O in the
new world order.
I think the best is to use the SG_IO ioctl instead of the read/write
interface as that allows us to support scsi passthrough on disk/cdrom
devices, too. See Hannes patch on the kvm list from August for an
example.
Now that we always do ioctls we don't need another abstraction than
bdrv_ioctl for the synchronous requests for now, and for asynchronous
requests I've added a aio_ioctl abstraction keeping it simple.
Long-term we might want to move the ops to a higher-level abstraction
and let the low-level code fill out the request header, but I'm lazy
enough to leave that to the people trying to support scsi-passthrough
on a non-Linux OS.
Tested lightly by issuing various sg_ commands from sg3-utils in a guest
to a host CDROM device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6895 c046a42c-6fe2-441c-8c8c-71466251a162
When a scsi device is backed by a scsi generic device instead of an
ordinary host block device, the block API is abused in a couple of annoying
ways:
- nb_sectors is negative, and specifies a byte count instead of a sector count
- offset is ignored, since scsi-generic is essentially a packet protocol
This overloading makes hacking the block layer difficult. Remove it by
introducing a new explicit API for scsi-generic devices. The new API
is still backed by the old implementation, but at least the users are
insulated.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6822 c046a42c-6fe2-441c-8c8c-71466251a162
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6815 c046a42c-6fe2-441c-8c8c-71466251a162
This series is broken by design as it requires expensive IO operations at
open time causing very long delays when starting a virtual machine for the
first time.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6813 c046a42c-6fe2-441c-8c8c-71466251a162
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
Reading the passwords for encrypted hard disks during early startup is
broken (I guess for quiet a while now):
- No monitor terminal is ready for input at this point
- Forcing all mux'ed terminals into monitor mode can confuse other
users of that channels
To overcome these issues and to lay the ground for a clean decoupling of
monitor terminals, this patch changes the initial password inquiry as
follows:
- Prevent autostart if there is some encrypted disk
- Once the user tries to resume the VM, prompt for all missing
passwords
- Only resume if all passwords were accepted
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6707 c046a42c-6fe2-441c-8c8c-71466251a162
Introduce bdrv_get_encrypted_filename service to allow more informative
password prompting.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6704 c046a42c-6fe2-441c-8c8c-71466251a162
Make bdrv_iterate more useful by passing the BlockDriverState to the
iterator instead of the device name.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6703 c046a42c-6fe2-441c-8c8c-71466251a162
'num_free_bytes' is the number of non-allocated bytes below highest-allocation.
It's useful, together with the highest-allocation, to figure out how
fragmented the image is, and how likely it will run out-of-space soon.
For example when the highest allocation is high (almost end-of-disk), but
many bytes (clusters) are free, and can be re-allocated when neeeded, than
we know it's probably not going to reach end-of-disk-space soon.
Added bookkeeping to block-qcow2.c
Export it using BlockDeviceInfo
Show it upon 'info blockstats' if BlockDeviceInfo exists
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6407 c046a42c-6fe2-441c-8c8c-71466251a162
Most devices that are capable of DMA are also capable of scatter-gather.
With the memory mapping API, this means that the device code needs to be
able to access discontiguous host memory regions.
For block devices, this translates to vectored I/O. This patch implements
an aynchronous vectored interface for the qemu block devices. At the moment
all I/O is bounced and submitted through the non-vectored API; in the future
we will convert block devices to natively support vectored I/O wherever
possible.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6397 c046a42c-6fe2-441c-8c8c-71466251a162
qcow2 writes a cluster reference count on every cluster update. This causes
performance to crater when using anything but cache=writeback. This is most
noticeable when using savevm. Right now, qcow2 isn't a reliable format
regardless of the type of cache your using because metadata is not updated in
the correct order. Considering this, I think it's somewhat reasonable to use
writeback caching by default with qcow2 files.
It at least avoids the massive performance regression for users until we sort
out the issues in qcow2.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5879 c046a42c-6fe2-441c-8c8c-71466251a162
Virtio will want to use the geometry detection code. It doesn't belong
in ide.c anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5797 c046a42c-6fe2-441c-8c8c-71466251a162
Generate an option rom instead of using a hijacked boot sector for kernel
booting. This just requires adding a small option ROM header and a few more
instructions to the boot sector to take over the int19 vector and run our
boot code.
A disk is no longer needed when using -kernel on x86.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5650 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the cache= option to accept none, writeback, or writethough
to control the host page cache behavior. By default, writethrough caching is
now used which internally is implemented by using O_DSYNC to open the disk
images. When using -snapshot, writeback is used by default since data integrity
it not at all an issue.
cache=none has the same behavior as cache=off previously. The later syntax is
still supported by now deprecated. I also cleaned up the O_DIRECT
implementation to avoid many of the #ifdefs.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5485 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a bdrv_flush_all() function. It's necessary to ensure that all
IO operations have been flushed to disk before completely a live migration.
N.B. we don't actually use this now. We really should flush the block drivers
using an live savevm callback to avoid unnecessary guest down time.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5432 c046a42c-6fe2-441c-8c8c-71466251a162
This patch refactors the AIO layer to allow multiple AIO implementations. It's
only possible because of the recent signalfd() patch.
Right now, the AIO infrastructure is pretty specific to the block raw backend.
For other block devices to implement AIO, the qemu_aio_wait function must
support registration. This patch introduces a new function,
qemu_aio_set_fd_handler, which can be used to register a file descriptor to be
called back. qemu_aio_wait() now polls a set of file descriptors registered
with this function until one becomes readable or writable.
This patch should allow the implementation of alternative AIO backends (via a
thread pool or linux-aio) and AIO backends in non-traditional block devices
(like NBD).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5297 c046a42c-6fe2-441c-8c8c-71466251a162
Right now, we sprinkle #if defined(QEMU_IMG) && defined(QEMU_NBD) all over the
code. It's ugly and causes us to have to build multiple object files for
linking against qemu and the tools.
This patch introduces a new file, qemu-tool.c which contains enough for
qemu-img, qemu-nbd, and QEMU to all share the same objects.
This also required getting qemu-nbd to be a bit more Windows friendly. I also
changed the Windows block-raw to use normal IO instead of overlapping IO since
we don't actually do AIO yet on Windows. I changed the various #if 0's to
#if WIN32_AIO to make it easier for someone to eventually fix AIO on Windows.
After this patch, there are no longer any #ifdef's related to qemu-img and
qemu-nbd.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5226 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces signalfd() to work around the signal/select race in
checking for AIO completions. For platforms that don't support signalfd(), we
emulate it with threads.
There was a long discussion about this approach. I don't believe there are any
fundamental problems with this approach and I believe eliminating the use of
signals is a good thing.
I've tested Windows and Linux using Windows and Linux guests. I've also checked
for disk IO performance regressions.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5187 c046a42c-6fe2-441c-8c8c-71466251a162
Qemu 0.9.1 and earlier does not perform range checks for block device
read or write requests, which allows guest host users with root
privileges to access arbitrary memory and escape the virtual machine.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4037 c046a42c-6fe2-441c-8c8c-71466251a162
Remove QEMU_TOOL. Replace with QEMU_IMG and NEED_CPU_H.
Avoid linking qemu-img against whole system emulatior.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3578 c046a42c-6fe2-441c-8c8c-71466251a162
