Commit Graph

254 Commits

Author SHA1 Message Date
Stefan Hajnoczi
b15446fdbf blockdev: acquire AioContext in block_set_io_throttle
The block_set_io_throttle QMP and HMP commands modify I/O throttling
limits for block devices.

Acquire the BlockDriverState's AioContext to protect against race
conditions with an IOThread that is running I/O for this device.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-06-04 09:56:12 +02:00
Markus Armbruster
3cb0e25c4b blockdev: Plug memory leak in drive_init()
bs_opts is leaked on all paths from its qdev_new() that don't got
through blockdev_init().  Add the missing QDECREF(), and zap bs_opts
after blockdev_init(), so the new QDECREF() does nothing when we go
through blockdev_init().

Leak introduced in commit f298d07.  Spotted by Coverity.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-30 14:26:54 +02:00
Markus Armbruster
6376f95223 blockdev: Plug memory leak in blockdev_init()
blockdev_init() leaks bs_opts when qemu_opts_create() fails, i.e. when
the ID is bad.  Missed in commit ec9c10d.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-30 14:26:54 +02:00
Markus Armbruster
b1422f2040 blockdev: Don't use qerror_report() in do_drive_del()
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP.  It should not be used elsewhere.

do_drive_del() is an HMP command that won't be converted to QMP (we'll
create a new QMP command instead).  It uses both qerror_report() and
error_report().  Convert the former to the latter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Markus Armbruster
e8817e7b0e blockdev: Don't use qerror_report_err() in drive_init()
qerror_report_err() is a transitional interface to help with
converting existing HMP commands to QMP.  It should not be used
elsewhere.

drive_init() is not meant to be used by QMP commands.  It uses both
qerror_report_err() and error_report().  Convert the former to the
latter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Fam Zheng
628ff68303 block: Move op_blocker check from block_job_create to its caller
It makes no sense to check for "any" blocker on bs, we are here only
because of the mechanical conversion from in_use to op_blockers. Remove
it now, and let the callers check specific operation types. Backup and
mirror already have it, add checker to stream and commit.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Fam Zheng
3718d8ab65 block: Replace in_use with operation blocker
This drops BlockDriverState.in_use with op_blockers:

  - Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).

  - Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).

  - Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).

    The specific types are used, e.g. in place of starting block backup,
    bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).

    There is one exception in block_job_create, where
    bdrv_op_blocker_is_empty() is used, because we don't know the operation
    type here. This doesn't matter because in a few commits away we will drop
    the check and move it to callers that _do_ know the type.

  - Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).

Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.

Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28 14:28:46 +02:00
Peter Lieven
465bee1da8 block: optimize zero writes with bdrv_write_zeroes
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.

This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.

I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.

a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX

QCOW2         [off]     [on]     [unmap]
-----
runtime:       14secs    1.1secs  1.1secs
filesize:      937M      18M      18M

iSCSI         [off]     [on]     [unmap]
----
runtime:       9.3s      0.9s     0.9s

b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct

QCOW2         [off]     [on]     [unmap]
-----
runtime:       246secs   18secs   18secs
filesize:      51G       192K     192K
throughput:    203M/s    2.3G/s   2.3G/s

iSCSI*        [off]     [on]     [unmap]
----
runtime:       8mins     45secs   33secs
throughput:    106M/s    1.2G/s   1.6G/s
allocated:     100%      100%     0%

* The storage was connected via an 1Gbit interface.
  It seems to internally handle writing zeroes
  via WRITESAME16 very fast.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19 13:42:27 +02:00
Peter Lieven
82a402e99f blockdev: add a function to parse enum ids from strings
this adds a generic function to recover the enum id of a parameter
given as a string.

Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19 12:21:17 +02:00
Peter Maydell
13de54eedd Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  monitor: fix qmp_getfd() fd leak in error case
  HMP: support specifying dump format for dump-guest-memory
  HMP: fix doc of dump-guest-memory
  qmp: object-add: Validate class before creating object
  monitor: Add device_add and device_del completion.
  monitor: Add command_completion callback to mon_cmd_t.
  monitor: Fix drive_del id argument type completion.
  error: Remove some unused headers
  qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTED
  qerror.h: Remove QERR defines that are only used once
  qerror.h: Remove unused error classes
  error: Print error_report() to stderr if using qmp
  monitor: Remove unused monitor_print_filename
  error: Privatize error_print_loc
  vnc: Remove default_mon usage
  slirp: Remove default_mon usage

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-28 12:56:34 +01:00
Markus Armbruster
f70edf9948 blockdev: Clean up fragile use of error_is_set()
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque.  It's wrong when ERRP
may be null, because errors go undetected when it is.  It's fragile
when proving ERRP non-null involves a non-local argument.  Else, it's
unnecessarily opaque (see commit 84d18f0).

The error_is_set(errp) in internal_snapshot_prepare() is merely
fragile, because the caller never passes a null errp argument.

Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25 18:05:06 +02:00
Cole Robinson
f231b88db1 qerror.h: Remove QERR defines that are only used once
Just hardcode them in the callers

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:19:59 -04:00
Kevin Wolf
f2d953ec31 block: Catch duplicate IDs in bdrv_new()
Since commit f298d071, block devices added with blockdev-add don't have
a QemuOpts around in dinfo->opts. Consequently, we can't rely any more
on QemuOpts catching duplicate IDs for block devices.

This patch adds a new check for duplicate IDs to bdrv_new(), and moves
the existing check that the ID isn't already taken for a node-name there
as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-04-22 12:00:28 +02:00
Kevin Wolf
98522f63f4 block: Add errp to bdrv_new()
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.

Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-04-22 12:00:20 +02:00
Max Reitz
5450466394 block-commit: speed is an optional parameter
As speed is an optional parameter for the QMP block-commit command, it
should be set to 0 if not given (as it is undefined if has_speed is
false), that is, the speed should not be limited.

Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-04-11 13:59:49 +02:00
Kevin Wolf
c6e0bd9b70 blockdev: Fix NULL pointer dereference in blockdev-add
If aio=native, we check that cache.direct is set as well. If however
cache wasn't specified at all, qemu just segfaulted.

The old condition didn't make any sense anyway because it effectively
only checked for the default cache mode case, but not for an explicitly
set cache.direct=off mode.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-06 17:27:28 +01:00
Kevin Wolf
8ae8e904fc blockdev: Fail blockdev-add with encrypted images
Encrypted images need a password before they can be used, and we don't
want blockdev-add to create BDSes that aren't fully initialised. So for
now simply forbid encrypted images; we can come back to it later if we
need the functionality.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-06 17:27:23 +01:00
Max Reitz
ddf5636dc9 block: Add reference parameter to bdrv_open()
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:22 +01:00
Max Reitz
f67503e5bd block: Change BDS parameter of bdrv_open() to **
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21 21:02:21 +01:00
Peter Maydell
61e8a92364 QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
 * NAND fix for "info qtree"
 * Cleanup and extension of QOM machine tests
 * IndustryPack test cases and conversion to QOM realize
 * I2C cleanups
 * Cleanups of legacy qdev properties
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTAooJAAoJEPou0S0+fgE/SuQQALW3zvra4ZLRAQV0e8kFoyj1
 vVtmLkDhnCe4cYfxxfOX91NA0rH1ts2EO1+UcnaCHJlptNWfA+8qJW69XgYpHE3c
 DKQlKPL/9pV5ywY5uUw/t1UJHg2BfrLBDDM4lP+vrpwiQYq4kp24JffnhfY3l9MA
 9qdkXu1HrlWoLRVGnMyGDXI8cb+5bTL+FEc6UuHl3P89/gj5BV+LDWn0QOFbAkxq
 4wk+Xh6sHKcfOdq6vMCNGlTjlJnpbY43D1a8+q6hFGG8JBlpne7Oer7bse9k4uTK
 q/CzyNzC0lnjjcULpa4ptRlycH0ruD9DPY7Lco9XqYd3l/c9742PmTEqN5TZseKD
 XD7+hwT1tk7W8rihm8KETCP6sKlXz4w8tJiWe6IT3zwRzvXIolxxK93heQuaX73Z
 HFDmvTPVLUiWF8ftKTyWZM3w+jsbSH0QSrMCIHKJrPTRWTKphx0DUP74lWjNsvGs
 FFBjpAgrflLihxiuRrcLmekGn0xCTjhQWIo2GoiWTgLSEHNQQQUNO+15/kcU/vlI
 hh3DJpiBKeSnUapHHL0OEK6ryeHoG95akiRjImwWVthNLk4KEuWtlhFPYBtulO5A
 PA02trE4Ah769effX0ZYdNl23KbW4VxpZ8VZv+kp7RTrDKxw551HoEFJ5ja0nkvB
 O1CfsE7x0GH/Rbi/Hxhu
 =KRcc
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging

QOM infrastructure fixes and device conversions

* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties

# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg:                 aka "Andreas Färber <afaerber@suse.com>"

* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
  qtest: Include system headers before user headers
  qapi: Refine human printing of sizes
  qdev: Use QAPI type names for properties
  qdev: Add enum property types to QAPI schema
  block: Handle "rechs" and "large" translation options
  qdev: Remove hex8/32/64 property types
  qdev: Remove most legacy printers
  qdev: Use human mode in "info qtree"
  qapi: Add human mode to StringOutputVisitor
  qdev: Inline qdev_prop_parse()
  qdev: Legacy properties are just strings
  qdev: Legacy properties are now read-only
  qdev: Remove legacy parsers for hex8/32/64
  qdev: Sizes are now parsed by StringInputVisitor
  qapi: Add size parser to StringInputVisitor
  qtest: Don't segfault with invalid -qtest option
  ipack: Move IndustryPack out of hw/char/
  ipoctal232: QOM parent field cleanup
  ipack: QOM parent field cleanup for IPackDevice
  ipack: QOM parent field cleanup for IPackBus
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20 13:05:48 +00:00
Peter Maydell
4c0c9bbe78 Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
* remotes/qmp-unstable/queue/qmp:
  monitor: Add object_add class argument completion.
  monitor: Add object_del id argument completion.
  monitor: Add device_add device argument completion.
  monitor: Add device_del id argument completion.
  qmp: expose list of supported character device backends
  Use error_is_set() only when necessary
  QMP: allow JSON dict arguments in qmp-shell
  hmp: migrate command (without -d) now blocks correctly

Conflicts:
	blockdev.c

[PMM: resolved trivial conflict in blockdev.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20 12:10:23 +00:00
Markus Armbruster
84d18f065f Use error_is_set() only when necessary
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out.  Unnecessarily hard for
optimizers, static checkers, and human readers.  Dumb it down to
obvious.

Gets rid of several dozen Coverity false positives.

Note that the obvious form is already used in many places.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-17 11:57:23 -05:00
Paolo Bonzini
f31c41ff5e block: Handle "rechs" and "large" translation options
Sure, CHS translation is an obscure topic, and legacy options for
hard-disk geometries are obscure as well.  But since QEMU does nothing
with it except telling the BIOS, and since there "large" and "rechs"
are listed in the enums, parsing them seems to be the bare minimum.

Acked-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14 21:12:04 +01:00
Benoît Canet
0c5e94ee83 block: Open by reference will try device then node_name.
Since we introduced node_name for named bs of the graph modify the opening by
reference to use it as a fallback.

This patch also enforce the separation of the device id and graph node
namespaces.

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14 18:05:39 +01:00
Benoît Canet
57b6bdf37c blockdev: Fix wrong usage of QDECREF causing snapshoted quorum to crash on close.
As bdrv_open() documentation states:
"The reference to the QDict belongs to the block layer
 * after the call (even on failure), so if the caller intends to reuse the
 * dictionary, it needs to use QINCREF() before calling bdrv_open."

the optional options dict will not be reused after bdrv_open() and should
belong to the block layer so remove the extra QDECREF(options).

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14 18:05:39 +01:00
Kevin Wolf
ee13ed1cbc blockdev: Remove 'type' parameter from blockdev_init()
blockdev-add doesn't know about the device that the backend will be
attached to, this is a legacy -drive concept. Move the remaining checks
that use it to drive_init().

[Fam Zheng <famz@redhat.com> suggested line-wrapping to 80 chars as
required by the coding standard.  I have fixed this.
--Stefan]

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14 13:04:56 +01:00
Benoît Canet
0901f67ecd qmp: Allow to take external snapshots on bs graphs node.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet
3b1dbd11a6 qmp: Allow block_resize to manipulate bs graph nodes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet
212a5a8f09 block: Create authorizations mechanism for external snapshot and resize.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet
12d3ba821d qmp: Allow to change password on named block driver states.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>

There was two candidate ways to implement named node manipulation:

1)
{ 'command': 'block_passwd', 'data': {'*device': 'str',
                                      '*node-name': 'str', 'password': 'str'}
}

2)

{ 'command': 'block_passwd', 'data': {'device': 'str',
                                      '*device-is-node': 'bool',
                                      'password': 'str'} }

Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to
rewrite the QMP block interface for 2.0.

Luiz does not like in 1 the fact that 2 fields are optional but one of them must
be specified leading to an abuse of the QMP semantic.

Kevin argumented that 2 what a clear abuse of the device field and would not be
practical when reading fast some log file because the user would read "device"
and think that a device is manipulated when it's in fact a node name.
Documentation of 1 make it pretty clear what to do for the user.

Kevin argued that all bs are node including devices ones so 2 does not make
sense.

Kevin also argued that rewriting the QMP block interface would not make disapear
the current one.

Kevin pushed the argument that making the QAPI generator compatible with the
semantic of the operation would need a rewrite that no one has done yet.

A vote has been done on the list to elect the version to use and 1 won.

For reference the complete thread is:
"[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver
states."

Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Benoît Canet
c13163fba1 qmp: Add QMP query-named-block-nodes to list the named BlockDriverState nodes.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:07:08 +01:00
Max Reitz
d095b46533 blockdev: Move "file" to legacy_opts
Specifying the image filename through the "file" option is a legacy
option and should not be supported by blockdev-add (in that case, giving
a string for "file" references an existing block device).

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-22 12:07:18 +01:00
Edgar E. Iglesias
133fe77437 Merge remote branch 'luiz/queue/qmp' into qmpq
* luiz/queue/qmp:
  migration: qmp_migrate(): keep working after syntax error
  qerror: Remove assert_no_error()
  qemu-option: Remove qemu_opts_create_nofail
  target-i386: Remove assert_no_error usage
  hw: Remove assert_no_error usages
  qdev: Delete dead code
  error: Add error_abort
  monitor: add object-add (QMP) and object_add (HMP) command
  monitor: add object-del (QMP) and object_del (HMP) command
  qom: catch errors in object_property_add_child
  qom: fix leak for objects created with -object
  rng: initialize file descriptor to -1
  qemu-monitor: HMP cpu-add wrapper
  vl: add missing transition debug->finish_migrate

Message-Id: 1389045795-18706-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-01-14 12:10:08 +10:00
Peter Crosthwaite
87ea75d5e1 qemu-option: Remove qemu_opts_create_nofail
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.

null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 15:02:30 -05:00
Fam Zheng
20a63d2cec commit: Support commit active layer
If active is top, it will be mirrored to base, (with block/mirror.c
code), then the image is switched when user completes the block job.

QMP documentation is updated.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-20 16:26:16 +01:00
Marc-André Lureau
314f7ea74f qmp_change_blockdev() remove unused has_format
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-12-16 10:12:20 +01:00
Max Reitz
117e0c8288 block/drive-mirror: Reuse backing HD for sync=none
For "none" sync mode in "absolute-paths" mode, the current image should
be used as the backing file for the newly created image.

The current behavior is:
a) If the image to be mirrored has a backing file, use that (which is
   wrong, since the operations recorded by "none" are applied to the
   image itself, not to its backing file).
b) If the image to be mirrored lacks a backing file, the target doesn't
   have one either (which is not really wrong, but not really right,
   either; "none" records a set of operations executed on the image
   file, therefore having no backing file to apply these operations on
   seems rather pointless).

For a, this is clearly a bugfix. For b, it is still a bugfix, although
it might break existing API - but since that case crashed qemu just
three weeks ago (before 1452686495), we
can safely assume there is no such API relying on that case yet.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-2-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-27 07:53:32 -08:00
Amos Kong
968854c8a1 qmp: access the local QemuOptsLists for drive option
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].

This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14 13:09:07 +01:00
Max Reitz
1452686495 block/drive-mirror: Check for NULL backing_hd
It should be possible to execute the QMP "drive-mirror" command in
"none" sync mode and "absolute-paths" mode even for block devices
lacking a backing file.

"absolute-paths" does in fact not require a backing file to be present,
as can be seen from the "top" sync mode code path. "top" basically
states that the device should indeed have a backing file - however, the
current code catches the case if it doesn't and then simply treats it as
"full" sync mode, creating a target image without a backing file (in
"absolute-paths" mode). Thus, "absolute-paths" does not imply the target
file must indeed have a backing file.

Therefore, the target file may be left unbacked in case of "none" sync
mode as well, if the specified device is not backed either. Currently,
qemu will crash trying to dereference the backing file pointer since it
assumes that it will always be non-NULL in that case ("none" with
"absolute-paths").

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14 13:09:06 +01:00
Stefan Hajnoczi
ec9c10d29c blockdev: fix drive_init() opts and bs_opts leaks
These memory leaks also make drive_add if=none,id=drive0 without a file=
option leak the options list.  This keeps ID "drive0" around forever.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-11-07 13:53:31 +01:00
Fam Zheng
a7fdbcf0e6 blockdev: fix cdrom read_only flag
Since 0ebd24e0, cdrom doesn't have read-only on by default, which will
error out when using an read only image. Fix it by setting the default
value when parsing opts.

Reported-by: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Signed-off-by: Fam Zheng <famz@redhat.com>

Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-10-17 10:19:59 +02:00
Kevin Wolf
b681072d20 blockdev: blockdev_init() error conversion
This gives us meaningful error messages for the blockdev-add QMP
command.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:02 +02:00
Kevin Wolf
0ebd24e0a2 blockdev: Don't disable COR automatically with blockdev-add
If a read-only device is configured with copy-on-read=on, the old code
only prints a warning and automatically disables copy on read. Make it
a real error for blockdev-add.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:02 +02:00
Kevin Wolf
e34ef04641 blockdev: Remove 'media' parameter from blockdev_init()
The remaining users shouldn't be there with blockdev-add and are easy to
move to drive_init().

Bonus bug fix: As a side effect, CD-ROM drives can now use block drivers
on the read-only whitelist without explicitly specifying read-only=on,
even if a format is explicitly specified.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:02 +02:00
Kevin Wolf
4f8a066b5f blockdev: Remove IF_* check for read-only blockdev_init
IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.

Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf
394c7d4d6b blockdev: Move virtio-blk device creation to drive_init
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf
87a899c509 blockdev: Move bus/unit/index processing to drive_init
This requires moving the automatic ID generation at the same time, so
let's do that as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf
2692929802 blockdev: Move parsing of 'boot' option to drive_init
It's already ignored and only prints a deprecation message. No use in
making it available in new interfaces.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf
b41a7338cf blockdev: Moving parsing of geometry options to drive_init
This moves all of the geometry options (cyls/heads/secs/trans) to
drive_init so that they can only be accessed using legacy functions, but
never with anything blockdev-add related.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00
Kevin Wolf
593d464bd4 blockdev: Move parsing of 'if' option to drive_init
It's always IF_NONE for blockdev-add.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
2013-10-11 16:50:01 +02:00