Currently we ignore this error, report it with error_reportf_err()
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
qobject_to_qdict(obj) returns NULL when obj isn't a QDict. Check
that instead of qobject_type(obj) == QTYPE_QDICT.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487363905-9480-8-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When performing clock calculations, the ppc405_uc code
has several places where it multiplies together two
32-bit variables and assigns the result to a 64-bit
variable. This doesn't quite do what is intended because
C will compute a 32-bit multiply result. Add casts to
ensure we don't truncate the result.
(Spotted by Coverity, CID 1005504, 1005505.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On POWER, the valid page sizes that the guest can use are bound
to the CPU and not to the memory region. QEMU already has some
fancy logic to find out the right maximum memory size to tell
it to the guest during boot (see getrampagesize() in the file
target/ppc/kvm.c for more information).
However, once we're booted and the guest is using huge pages
already, it is currently still possible to hot-plug memory regions
that does not support huge pages - which of course does not work
on POWER, since the guest thinks that it is possible to use huge
pages everywhere. The KVM_RUN ioctl will then abort with -EFAULT,
QEMU spills out a not very helpful error message together with
a register dump and the user is annoyed that the VM unexpectedly
died.
To avoid this situation, we should check the page size of hot-plugged
DIMMs to see whether it is possible to use it in the current VM.
If it does not fit, we can print out a better error message and
refuse to add it, so that the VM does not die unexpectely and the
user has a second chance to plug a DIMM with a matching memory
backend instead.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1419466
Signed-off-by: Thomas Huth <thuth@redhat.com>
[dwg: Fix a build error on 32-bit builds with KVM]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The spapr-vlan device in QEMU has always presented it's MAC address in
the device tree as an 8 byte value, even though PAPR requires it to be
6 bytes. This is because, at the time, AIX required the value to be 8
bytes. However, modern versions of AIX support the (correct) 6
byte value so they no longer require the workaround.
It would be neatest to always provide a 6 byte value but that would
cause a problem with old Linux kernel ibmveth drivers, so the old 8
byte value is still presented when necessary.
Since commit 13f85203e (3.10, May 2013) the driver has been able to
handle 6 or 8 byte addresses so versions after that don't need to be
considered specially.
Drivers from kernels before that can also handle either type of
address, but not always:
* If the first byte's lowest bits are 10, the address must be 6 bytes.
* Otherwise, the address must be 8 bytes.
(The two bits in question are significant in a MAC address: they
indicate a locally-administered unicast address.)
So to maintain compatibility the old 8 byte value is presented when
the lowest two bits of the first byte are not 10.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Generic helper machine_query_hotpluggable_cpus() replaced
target specific query_hotpluggable_cpus() callbacks so
there is no need in it anymore. However inon NULL callback
value is used to detect/report hotpluggable cpus support,
therefore it can be removed completely.
Replace it with MachineClass.has_hotpluggable_cpus boolean
which is sufficient for the task.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All callbacks FOO_query_hotpluggable_cpus() are practically
the same except of setting vcpus_count to different values.
Convert them to a generic machine_query_hotpluggable_cpus()
callback by moving vcpus_count initialization to per machine
specific callback possible_cpu_arch_ids().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace SPAPR specific cores[] array with generic
machine->possible_cpus and store core objects there.
It makes cores bookkeeping similar to x86 cpus and
will allow to unify similar code.
It would allow to replace cpu_index based NUMA node
mapping with iproperty based one (for -device created
cores) since possible_cpus carries board defined
topology/layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so it could be reused for SPAPR cores as well
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fill in CpuInstanceProperties once at board init time and
just copy them whenever query_hotpluggable_cpus() is called.
It will keep topology info always available without need
to recalculate it every time it's needed.
Considering it has NUMA node id, it will be used to keep
NUMA node to cpu mapping instead of numa_info[i].node_cpu
bitmasks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
possible_cpus could be initialized earlier then cpu objects,
i.e. when -smp is parsed so move init code to possible_cpu_arch_ids()
interface func and do initialization on the first call.
it should help later with making -numa cpu/-smp parsing a machine state
properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
so that it would be possible to reuse it with
spapr/virt-aarch64 targets.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
hw_error() is for CPU related errors only (it prints out a
register dump and calls abort()), so we should not use it
if we just failed to load the bios image. Apart from that,
realize() functions should not exit directly but always set
the errp with error_setg() in case of errors instead.
Additionally, move some code around and delete the bios memory
subregion again in case of such an error, so that we leave a
clean state when returning to the caller.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last byte of the option vector was missing due to an off-by-one
error. Without this fix, client architecture support negotiation will
fail because the last byte of option vector 5, which contains the MMU
support, will be missed.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
error_report() already puts a prefix with the program name in front
of the error strings, so the "qemu:" prefix is not necessary here
anymore.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_unplug() were essentially spapr_core_unplug_request()
handler that requested CPU removal and registered callback
which did actual cpu core removali but it was called from
spapr_machine_device_unplug() which is intended for actual object
removal. Commit (cf632463 spapr: Memory hot-unplug support)
sort of fixed it introducing spapr_machine_device_unplug_request()
and calling spapr_core_unplug() but it hasn't renamed callback and
by mistake calls it from spapr_machine_device_unplug().
However spapr_machine_device_unplug() isn't ever called for
cpu core since spapr_core_release() doesn't follow expected
hotunplug call flow which is:
1: device_del() ->
hotplug_handler_unplug_request() ->
set destroy_cb()
2: destroy_cb() ->
hotplug_handler_unplug() ->
object_unparent // actual device removal
Fix it by renaming spapr_core_unplug() to spapr_core_unplug_request()
which is called from spapr_machine_device_unplug_request() and
making spapr_core_release() call hotplug_handler_unplug() which
will call spapr_machine_device_unplug() -> spapr_core_unplug()
to remove cpu core.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reveiwed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr_core_pre_plug/spapr_core_plug/spapr_core_unplug() are managing
wiring CPU core into spapr machine state and not internal CPU core state.
So move them from spapr_cpu_core.c to spapr.c where other similar
(spapr_memory_[foo]plug()) callbacks are located, which also matches
x86 target practice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Split off destroying VCPU threads from drc callback
spapr_core_release() into new spapr_cpu_core_unrealizefn()
which takes care of internal cpu core state cleanup (i.e.
VCPU threads) and is called when object_unparent(core)
is called.
That leaves spapr_core_release() only with board mgmt
code, which will be moved to board related file in
follow up patch along with the rest on hotplug callbacks.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce support for emulating the MIPS Boston development board. The
Boston board is built around an FPGA & 3 PCIe controllers, one of which
is connected to an Intel EG20T Platform Controller Hub. It is used
during the development & debug of new CPUs and the software intended to
run on them, and is essentially the successor to the older MIPS Malta
board.
This patch does not implement the EG20T, instead connecting an already
supported ICH-9 AHCI controller. Whilst this isn't accurate it's enough
for typical stock Boston software (eg. Linux kernels) to work with hard
disks given that both the ICH-9 & EG20T implement the AHCI
specification.
Boston boards typically boot kernels in the FIT image format, and this
patch will treat kernels provided to QEMU as such. When loading a kernel
directly, the board code will generate minimal firmware much as the
Malta board code does. This firmware will set up the CM, CPC & GIC
register base addresses then set argument registers & jump to the kernel
entry point. Alternatively, bootloader code may be loaded using the bios
argument in which case no firmware will be generated & execution will
proceed from the start of the boot code at the default MIPS boot
exception vector (offset 0x1fc00000 into (c)kseg1).
Currently real Boston boards are always used with FPGA bitfiles that
include a Global Interrupt Controller (GIC), so the interrupt
configuration is only defined for such cases. Therefore the board will
only allow use of CPUs which implement the CPS components, including the
GIC, and will otherwise exit with a message.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
isolated boston machine support for mips64el.
updated for recent Chardev changes.
ignore missing bios/kernel for qtest.
added default -drive to if=ide explicitly]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Add support for emulating the Xilinx AXI Root Port Bridge for PCI
Express as described by Xilinx' PG055 document. This is a PCIe
controller that can be used with certain series of Xilinx FPGAs, and is
used on the MIPS Boston board which will make use of this code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
removed returning on !level,
updated IRQ connection with GPIO logic,
moved xilinx_pcie_init() to boston.c
replaced stw_le_p() with pci_set_word()
and other cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Introduce support for loading Flattened Image Trees, as used by modern
U-Boot. FIT images are essentially flattened device tree files which
contain binary images such as kernels, FDTs or ramdisks along with one
or more configuration nodes describing boot configurations.
The MIPS Boston board typically boots kernels in the form of FIT images,
and will make use of this code.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[yongbok.kim@imgtec.com:
fixed potential memory leaks,
isolated building option]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
If the GIC interrupt mask is changed by a write to the smask (set mask)
or rmask (reset mask) registers, we need to re-evaluate the state of the
pins/IRQs fed to the CPU. Without doing so we risk leaving a pin high
despite the interrupt that led to that state being masked, or losing
interrupts if an already pending interrupt is unmasked.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Provide a new function mips_gictimer_get_freq() which returns the
frequency at which a GIC timer will count. This will be useful for
boards which perform setup based upon this frequency.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Support moving the GCR base address & updating the CPU's CP0 CMGCRBase
register appropriately. This is required if a platform needs to move its
GCRs away from other memory, as the MIPS Boston development board does
to avoid its flash memory.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
-----BEGIN PGP SIGNATURE-----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=/97H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-block-2017-02-21' into staging
Changes to -drive without if= and with if=scsi
# gpg: Signature made Tue 21 Feb 2017 12:22:35 GMT
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-block-2017-02-21:
hw/i386: Deprecate -drive if=scsi with PC machine types
hw: Deprecate -drive if=scsi with non-onboard HBAs
hw/scsi: Concentrate -drive if=scsi auto-create in one place
hw: Drop superfluous special checks for orphaned -drive
blockdev: Make orphaned -drive fatal
blockdev: Improve message for orphaned -drive
hw/arm/highbank: Default -drive to if=ide instead of if=scsi
hw: Default -drive to if=none instead of scsi when scsi cannot work
hw: Default -drive to if=none instead of ide when ide cannot work
hw/arm/cubieboard hw/arm/xlnx-ep108: Fix units_per_default_bus
hw: Default -drive to if=ide explicitly where it works
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PC machines (pc-q35-* pc-i440fx-* pc-* isapc xenfv) automatically
create lsi53c895a SCSI HBAs and SCSI devices to honor -drive if=scsi.
For giggles, try -drive if=scsi,bus=25,media=cdrom --- this makes QEMU
create 25 of them.
lsi53c895a is thoroughly obsolete (PCI Ultra2 SCSI, ca. 2000), and
currently has no maintainer in QEMU. megasas is a better choice,
except with old OSes that lack drivers. virtio-scsi is a much better
choice when you have a driver, but only (newish) Linux comes with one
in the box. There is no good default that works for all guests.
Encourage users to pick a non-obsolete SCSI HBA that works for them by
deprecating -drive if=scsi.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-4-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
Block backends defined with "-drive if=T" with T other than "none" are
meant to be picked up by machine initialization code: a suitable
frontend gets created and wired up automatically.
Drives defined with if=scsi are also picked up by SCSI HBAs added with
-device, unlike other interface types. Deprecate this usage, as follows.
Create the frontends for onboard HBAs in machine initialization code,
exactly like we do for if=ide and other interface types. Change
scsi_legacy_handle_cmdline() to create a frontend only when it's still
missing, and warn that this usage is deprecated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-3-git-send-email-armbru@redhat.com>
The logic to create frontends for -drive if=scsi is in SCSI HBAs. For
all other interface types, it's in machine initialization code.
A few machine types create the SCSI HBAs necessary for that. That's
also not done for other interface types.
I'm going to deprecate these SCSI eccentricities. In preparation for
that, create the frontends in main() instead of the SCSI HBAs, by
calling new function scsi_legacy_handle_cmdline() there.
Note that not all SCSI HBAs create frontends. Take care not to change
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487161136-9018-2-git-send-email-armbru@redhat.com>
Acked-By: Paolo Bonzini <pbonzini@redhat.com>
We've traditionally rejected orphans here and there, but not
systematically. For instance, the sun4m machines have an onboard SCSI
HBA (bus=0), and have always rejected bus>0. Other machines with an
onboard SCSI HBA don't.
Commit a66c9dc made all orphans trigger a warning, and the previous
commit turned this into an error. The checks "here and there" are now
redundant. Drop them.
Note that the one in mips_jazz.c was wrong: it rejected bus > MAX_FD,
but MAX_FD is the number of floppy drives per bus.
Error messages change from
$ qemu-system-x86_64 -drive if=ide,bus=2
qemu-system-x86_64: Too many IDE buses defined (3 > 2)
$ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
qemu: too many floppy drives
$ qemu-system-sparc -M LX -drive if=scsi,bus=1
qemu: too many SCSI bus
to
$ qemu-system-x86_64 -drive if=ide,bus=2
qemu-system-x86_64: -drive if=ide,bus=2: machine type does not support if=ide,bus=2,unit=0
$ qemu-system-mips64 -M magnum,accel=qtest -drive if=floppy,bus=2,id=fd1
qemu-system-mips64: -drive if=floppy,bus=2,id=fd1: machine type does not support if=floppy,bus=2,unit=0
$ qemu-system-sparc -M LX -drive if=scsi,bus=1
qemu-system-sparc: -drive if=scsi,bus=1: machine type does not support if=scsi,bus=1,unit=0
Cc: John Snow <jsnow@redhat.com>
Cc: "Hervé Poussineau" <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487153147-11530-9-git-send-email-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
These machines have no onboard SCSI HBA, and no way to plug one.
-drive if=scsi therefore cannot work. They do have an onboard IDE
controller (sysbus-ahci), but fail to honor if=ide.
Change their default to if=ide, and add a TODO comment on what needs
to be done to actually honor -drive if=ide.
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1487153147-11530-6-git-send-email-armbru@redhat.com>
Block backends defined with -drive if=scsi are meant to be picked up
by machine initialization code: a suitable frontend gets created and
wired up automatically.
if=scsi drives not picked up that way can still be used with -device
as if they had if=none, but that's unclean and best avoided. Unused
ones produce an "Orphaned drive without device" warning.
A few machine types default to if=scsi, even though they don't
actually have a SCSI HBA. This makes no sense. Change their default
to if=none. Affected machines:
* aarch64/arm: realview-pbx-a9 vexpress-a9 vexpress-a15 xilinx-zynq-a9
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <1487153147-11530-5-git-send-email-armbru@redhat.com>
Machine types cubieboard, xlnx-ep108, xlnx-zcu102 have an onboard AHCI
controller, but neglect to set their MachineClass member
units_per_default_bus = 1. This permits -drive if=ide,unit=1, which
makes no sense for AHCI. It also screws up index=N for odd N, because
it gets desugared to unit=1,bus=N/2
Doesn't really matter, because these machine types fail to honor
-drive if=ide. Add the missing units_per_default_bus = 1 anyway,
along with a TODO comment on what needs to be done for -drive if=ide.
Also set block_default_type = IF_IDE explicitly. It's currently the
default, but the next commit will change it to something more
sensible, and we want to keep the IF_IDE default for these three
machines. See also the previous commit.
Cc: Beniamino Galvani <b.galvani@gmail.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Message-Id: <1487153147-11530-3-git-send-email-armbru@redhat.com>
Block backends defined with -drive if=ide are meant to be picked up by
machine initialization code: a suitable frontend gets created and
wired up automatically.
if=ide drives not picked up that way can still be used with -device as
if they had if=none, but that's unclean and best avoided. Unused ones
produce an "Orphaned drive without device" warning.
-drive parameter "if" is optional, and the default depends on the
machine type. If a machine type doesn't specify a default, the
default is "ide".
Many machine types default to if=ide, even though they don't actually
have an IDE controller. A future patch will change these defaults to
something more sensible. To prepare for it, this patch makes default
"ide" explicit for the machines that actually pick up if=ide drives:
* alpha: clipper
* arm/aarch64: spitz borzoi terrier tosa
* i386/x86_64: generic-pc-machine (with concrete subtypes pc-q35-*
pc-i440fx-* pc-* isapc xenfv)
* mips64el: fulong2e
* mips/mipsel/mips64el: malta mips
* ppc/ppc64: mac99 g3beige prep
* sh4/sh4eb: r2d
* sparc64: sun4u sun4v
Note that ppc64 machine powernv already sets an "ide" default
explicitly. Its IDE controller isn't implemented, yet.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1487153147-11530-2-git-send-email-armbru@redhat.com>
v2:
* Rebased to resolve scsi conflicts
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYrCroAAoJEJykq7OBq3PIpJAH/1nvSNr8IRrEWFXuHxHlwqXo
opt8PZm1BhKLwKoZ7qwttWk8oxWV+VBRZcnLnm1+chmIqzwbeUVo8nzFwPbv1kB3
2x3uLz+3Qn0uln9v43alK5mHZk7wpGCshFBn3jkxdltzZX9vIaG+8IkKsgkS+IiC
MkUPFfoY/wRQq+eyBvhe6xPHoIlKa++LeQdRQ4kayvaixW1dn4Hbvj/vLAAG1nKL
HcEtO3EddEgkIvX5yztOWNKvEPqcYes7Ki207CjH8GXj4Ygmn4dBebDq+GR0NYwm
EXERuJJiPEbSLFknffwioVfllWKCVwg7oFaIuz6ysxVGFwFZSdn83CTjK+FbtFU=
=k9gD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
v2:
* Rebased to resolve scsi conflicts
# gpg: Signature made Tue 21 Feb 2017 11:56:24 GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request: (24 commits)
coroutine-lock: make CoRwlock thread-safe and fair
coroutine-lock: add mutex argument to CoQueue APIs
coroutine-lock: place CoMutex before CoQueue in header
test-aio-multithread: add performance comparison with thread-based mutexes
coroutine-lock: add limited spinning to CoMutex
coroutine-lock: make CoMutex thread-safe
block: document fields protected by AioContext lock
async: remove unnecessary inc/dec pairs
aio-posix: partially inline aio_dispatch into aio_poll
block: explicitly acquire aiocontext in aio callbacks that need it
block: explicitly acquire aiocontext in bottom halves that need it
block: explicitly acquire aiocontext in callbacks that need it
block: explicitly acquire aiocontext in timers that need it
aio: push aio_context_acquire/release down to dispatching
qed: introduce qed_aio_start_io and qed_aio_next_io_cb
blkdebug: reschedule coroutine on the AioContext it is running on
coroutine-lock: reschedule coroutine on the AioContext it was running on
nbd: convert to use qio_channel_yield
io: make qio_channel_yield aware of AioContexts
io: add methods to set I/O handlers on AioContext
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All that CoQueue needs in order to become thread-safe is help
from an external mutex. Add this to the API.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170213181244.16297-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-16-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-15-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This covers both file descriptor callbacks and polling callbacks,
since they execute related code.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170213135235.12274-14-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check message size too when figuring whenever we should expect more data.
Fix debug message to show useful data, p->iov.size is fixed anyway if we
land there, print how much we got meanwhile instead.
Also check announced message size against actual message size. That
is a more general fix for CVE-2017-5898 than commit "c7dfbf3 usb: ccid:
check ccid apdu length".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-4-git-send-email-kraxel@redhat.com
Move up header size check, so we can use header fields in sanity checks
(in followup patches). Also reword the debug message.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-3-git-send-email-kraxel@redhat.com
Add err goto label where we can jump to from all error conditions.
STALL request on all errors. Reset position on all errors.
Normal request processing is not in a else branch any more, so this code
is reintended, there are no code changes in that part of the code
though.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1487250819-23764-2-git-send-email-kraxel@redhat.com
Turn existing TYPE_XHCI into an abstract base class.
Create two child classes, TYPE_NEC_XHCI (same name as old xhci
controller) and TYPE_QEMU_XHCI (using an ID from our namespace).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Message-id: 1486382139-30630-3-git-send-email-kraxel@redhat.com
The nec/renesas driver problems have finally been debugged and root
caused, see commit "7da76e1 xhci: fix event queue IRQ handling".
It's pretty clear now that
(a) The whole "driver can't handle ring full" story is most likely
wrong.
(b) The ER_FULL_HACK workaround based on the false assumtion doesn't
much. It avoids the driver crashing (without commit 7da76e1), but
it doesn't make usb work.
(c) With 7da76e1 applied it doesn't trigger any more.
So, lets kill it. Or, to be exact, lets almost kill it. Some data
fields are kept unused in the state struct, for live migration backward
compatibility.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486382139-30630-2-git-send-email-kraxel@redhat.com
Limits should be big enough that normal guest should not hit it.
Add a tracepoint to log them, just in case. Also, while being
at it, log the existing link trb limit too.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486383669-6421-1-git-send-email-kraxel@redhat.com
The guest may builds an infinite loop with link eds. This patch
limit the number of linked ed to avoid this.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 5899a02e.45ca240a.6c373.93c1@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It should return 1 if an error occurs when reading iso td.
This will avoid an infinite loop issue in ohci_service_ed_list.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 5899ac3e.1033240a.944d5.9a2d@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In usb_ehci_init function, it initializes 's->ipacket', but there
is no corresponding function to free this. As the ehci can be hotplug
and unplug, this will leak host memory leak. In order to make the
hierarchy clean, we should add a ehci pci finalize function, then call
the clean function in ehci device.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-id: 589a85b8.3c2b9d0a.b8e6.1434@mx.google.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use type_init() and friends to adapt the ColdFire interrupt
controller to the latest QEMU device conventions.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Since it is now possible to instantiate a CPU and RAM with the "none"
machine, too, and a kernel can be loaded there with the generic loader
device, there is no more need for the m68k "dummy" machine. Thus let's
remove this unmaintained file now.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
This helps in debugging incorrect level passed in.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Another patch to convert the DPRINTF() stuffs. This patch focuses on the
address translation path and caching.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VT-d codes are still using static DEBUG_INTEL_IOMMU macro. That's not
good, and we should end the day when we need to recompile the code
before getting useful debugging information for vt-d. Time to switch to
the trace system. This is the first patch to do it.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are lots of places in current intel_iommu.c codes that named
"iova" as "gpa". It is really confusing to use a name "gpa" in these
places (which is very easily to be understood as "Guest Physical
Address", while it's not). To make the codes (much) easier to be read, I
decided to do this once and for all.
No functional change is made. Only literal ones.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have a standalone memory region for MSI, all the irq region
requests should be redirected there. Cleaning up the block with an
assertion instead.
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This capability asks the guest to invalidate cache before each map operation.
We can use this invalidation to trap map operations in the hypervisor.
Signed-off-by: Aviv Ben-David <bd.aviv@gmail.com>
[peterx: using "caching-mode" instead of "cache-mode" to align with spec]
[peterx: re-write the subject to make it short and clear]
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Aviv Ben-David <bd.aviv@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linux vfio driver supports to do VFIO_IOMMU_UNMAP_DMA for a very big
region. This can be leveraged by QEMU IOMMU implementation to cleanup
existing page mappings for an entire iova address space (by notifying
with an IOTLB with extremely huge addr_mask). However current
vfio_iommu_map_notify() does not allow that. It make sure that all the
translated address in IOTLB is falling into RAM range.
The check makes sense, but it should only be a sensible checker for
mapping operations, and mean little for unmap operations.
This patch moves this check into map logic only, so that we'll get
faster unmap handling (no need to translate again), and also we can then
better support unmapping a very big region when it covers non-ram ranges
or even not-existing ranges.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A cleanup for vfio_iommu_map_notify(). Now we will fetch vaddr even if
the operation is unmap, but it won't hurt much.
One thing to mention is that we need the RCU read lock to protect the
whole translation and map/unmap procedure.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We traces its range, but we don't know whether it's a MAP/UNMAP. Let's
dump it as well.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we add PCIe extended capabilities, we should be following the rule
that we add the head extended cap (at offset 0x100) first, then the rest
of them. Meanwhile, we are always adding new capability bits at the end
of the list. Here the "next" looks meaningless in all cases since it
should always be zero (along with the "header").
Simplify the function a bit, and it looks more readable now.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For ARM virt machine, if we use virt-2.7 which will not create ITS node,
the virtio-net can not recieve interrupts so it can't get ip address
through dhcp.
This fixes commit 83d768b(virtio: set ISR on dataplane notifications).
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio-net change is necessary because it uses virtqueue_fill
and virtqueue_flush instead of the more convenient virtqueue_push.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vring has not been set up, it is not necessary for vring_used_idx
to do anything (as is already the case when the caller is virtio_load).
This is harmless for now, but it will be a problem when the
MemoryRegionCache has not been set up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The cached translations are RCU-protected to allow efficient use
when processing virtqueues.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now, the cache is created on every virtqueue_pop. Later on,
direct descriptors will be able to reuse it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This makes little difference, but it makes the code change smaller
for the next patch that introduces MemoryRegionCache. This is
because map/unmap are similar to MemoryRegionCache init/destroy.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In virtio_queue_host_notifier_aio_poll, not all "!virtio_queue_empty()"
cases are making true progress.
Currently the offending one is virtio-scsi event queue, whose handler
does nothing if no event is pending. As a result aio_poll() will spin on
the "non-empty" VQ and take 100% host CPU.
Fix this by reporting actual progress from virtio queue aio handlers.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Ed Swierk <eswierk@skyportsystems.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VFIO actually wants to create a capability with ID == 0.
This is done to make guest drivers skip the given capability.
pcie_add_capability then trips up on this capability
when looking for end of capability list.
To support this use-case, it's easy enough to switch to
e.g. 0xffffffff for these comparisons - we can be sure
it will never match a 16-bit capability ID.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
it's not very convenient to use the crash-information property interface,
so provide a CPU class callback to get the guest crash information, and pass
that information in the event
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-Id: <1487053524-18674-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use type_init() etc. to adapt the ColdFire UART
to the latest QEMU device conventions.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <1485586582-6490-1-git-send-email-huth@tuxfamily.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds call to apic_reset_irq_delivered when the virtual
machine is reset.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20170131114054.276.62201.stgit@PASHA-ISP>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-4-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It should be 0x20, rather than 0x11.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we do "info ioapic" for kvm ioapic, we were building up a temporary
ioapic object. Let's fetch the real one and update correspond to the
real object as well.
This fixes printing uninitialized version field in
ioapic_print_redtbl().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1486106298-3699-2-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This issue is like the issue in e1000 network card addressed in
this commit:
e1000: eliminate infinite loops on out-of-bounds transfer start.
Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
i.MX Fast Ethernet Controller uses buffer descriptors to manage
data flow to/fro receive & transmit queues. While transmitting
packets, it could continue to read buffer descriptors if a buffer
descriptor has length of zero and has crafted values in bd.flags.
Set an upper limit to number of buffer descriptors.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Because is_first is declared inside a loop, it is always true. The store
is dead, and so is the "else" branch of "if (is_first)". is_last is
okay though.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20170203160651.19917-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merge fix against Halil's removal of the '_start' field in
VMSTATE_VBUFFER_MULTIPLY
The member VMStateField.start is used for two things, partial data
migration for VBUFFER data (basically provide migration for a
sub-buffer) and for locating next in QTAILQ.
The implementation of the VBUFFER feature is broken when VMSTATE_ALLOC
is used. This however goes unnoticed because actually partial migration
for VBUFFER is not used at all.
Let's consolidate the usage of VMStateField.start by removing support
for partial migration for VBUFFER.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Message-Id: <20170203175217.45562-1-pasic@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Both devices seem to be specific to the ARM platform. It's confusing
for the users if they show up on other target architectures, too
(e.g. when the user runs QEMU with "-device ?" to get a list of
supported devices). Thus let's introduce proper configuration switches
so that the devices are only compiled and included when they are
really required.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The device has "bridge" in its name, so it should obviously be in
the category DEVICE_CATEGORY_BRIDGE.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Previous IGD, up through Broadwell, only seem to write GTT values into
the first 1MB of space allocated for the BDSM, but clearly the GTT
can be multiple MB in size. Our test in vfio_igd_quirk_data_write()
correctly filters out indexes beyond 1MB, but given the 1MB mask we're
using, we re-apply writes only to the first 1MB of the guest allocated
BDSM.
We can't assume either the host or guest BDSM is naturally aligned, so
we can't simply apply a different mask. Instead, save the host BDSM
and do the arithmetic to subtract the host value to get the BDSM
offset and add it to the guest allocated BDSM.
Reported-by: Alexander Indenbaum <alexander.indenbaum@gmail.com>
Tested-by: Alexander Indenbaum <alexander.indenbaum@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The size of a segment is not necessarily a power of 2.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486648058-520-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
HW works fine in normal read mode with dummy bytes being set. So let's
check this case to not transfer bytes.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1486648058-520-4-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The flash devices used for the FMC controller (BMC firmware) are well
defined for each Aspeed machine and are all smaller than the default
mapping window size, at least for CE0 which is the chip the SoC boots
from.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486648058-520-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
write_boot_rom() does not check for negative values. This is more a
problem for coverity than the actual code as the size of the flash
device is checked when the m25p80 object is created. If there is
anything wrong with the backing file, we should not even reach that
path.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1486648058-520-2-git-send-email-clg@kaod.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fw-cfg recently learned how to directly access guest memory and does so in
cache coherent fashion. Tell the guest about that fact when it's using DT.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1486644810-33181-5-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
