Commit Graph

647 Commits

Author SHA1 Message Date
Andrey Smirnov
9f5832d34b fsl_etsec: Fix various small problems in hexdump code
Fix various small problems in hexdump code, such as:
    - Reference to non-existing field etsec->nic->nc.name is replaced
    with nc->name

    - Type mismatch warnings

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-12-06 10:23:50 +08:00
Andrey Smirnov
64f441d2e5 fsl_etsec: Pad short payloads with zeros
Depending on QEMU network setup it is possible for us to receive a
complete Ethernet packet that is less 64 bytes long. One such example is
when QEMU is configured to use a standalone TAP device (not set to be a
part of any bridge) receives and ARP packet. In cases like that we need
to add more than just 4-bytes of CRC padding and ensure that our payload
is at least 60 bytes long, such that, when combined with CRC padding
bytes the resulting size is at least 802.3 minimum MTU bytes
long (64). Failing to do that results in code in etsec_walk_rx_ring()
setting BD_RX_SH which, in turn, makes corresponding Linux driver of
emulated host to reject buffer as a runt packet

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-12-05 17:45:14 +08:00
Prasad J Pandit
77d54985b8 net: mcf: check receive buffer size register value
ColdFire Fast Ethernet Controller uses a receive buffer size
register(EMRBR) to hold maximum size of all receive buffers.
It is set by a user before any operation. If it was set to be
zero, ColdFire emulator would go into an infinite loop while
receiving data in mcf_fec_receive. Add check to avoid it.

Reported-by: Wjjzhang <wjjzhang@tencent.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-12-05 17:45:14 +08:00
Stefan Hajnoczi
51f492e5da virtio, vhost, pc, pci: documentation, fixes and cleanups
Lots of fixes all over the place.
 
 Unfortunately, this does not yet fix a regression with vhost
 introduced by the last pull, the issue is typically this error:
     kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
 followed by QEMU aborting.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYKyfxAAoJECgfDbjSjVRpI4oH/2ZBpUxT/neq4ezX0bou5+1R
 lQ1m0VI1JDbay5uYw0Z0rUY7aLP0kX2XLu2jNBZg7fGz3+BPhqAoEjkGdlUran79
 fEnuYCvMMokQNzvMaHv+lFXO/MuEJthdDeUJyi4B0NU0sseutiz8opXuSWIC8Ncx
 pyqRb8AfgKnsUSRizEVfiOWI1fk+zsTFbSyUwajwKi5E7RNEuHwLiqk5VFhzrrTX
 nLwnUvlH7NrcDfliam9ziadhguo5cwCE4jBlMpeHnW5tGalNRulvF5EgwXybIdrU
 JaR6lzQabOcoaAuJJ/dgo336B1Ef3JA/hogqfTW4unJGL5VVkWT0HLZ9OV42NEg=
 =ibZy
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, vhost, pc, pci: documentation, fixes and cleanups

Lots of fixes all over the place.

Unfortunately, this does not yet fix a regression with vhost
introduced by the last pull, the issue is typically this error:
    kvm_mem_ioeventfd_add: error adding ioeventfd: File exists
followed by QEMU aborting.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (28 commits)
  docs: add PCIe devices placement guidelines
  virtio: drop virtio_queue_get_ring_{size,addr}()
  vhost: drop legacy vring layout bits
  vhost: adapt vhost_verify_ring_mappings() to virtio 1 ring layout
  nvdimm acpi: introduce NVDIMM_DSM_MEMORY_SIZE
  nvdimm acpi: use aml_name_decl to define named object
  nvdimm acpi: rename nvdimm_dsm_reserved_root
  nvdimm acpi: fix two comments
  nvdimm acpi: define DSM return codes
  nvdimm acpi: rename nvdimm_acpi_hotplug
  nvdimm acpi: cleanup nvdimm_build_fit
  nvdimm acpi: rename nvdimm_plugged_device_list
  docs: improve the doc of Read FIT method
  nvdimm acpi: clean up nvdimm_build_acpi
  pc: memhp: stop handling nvdimm hotplug in pc_dimm_unplug
  pc: memhp: move nvdimm hotplug out of memory hotplug
  nvdimm acpi: drop the lock of fit buffer
  qdev: hotplug: drop HotplugHandler.post_plug callback
  vhost: migration blocker only if shared log is used
  virtio-net: mark VIRTIO_NET_F_GSO as legacy
  ...

Message-id: 1479237527-11846-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-11-15 19:50:36 +00:00
Michael S. Tsirkin
2a083ffd2e virtio-net: mark VIRTIO_NET_F_GSO as legacy
virtio 1.0 spec says this is a legacy feature bit,
hide it from guests in modern mode.

Note: for cross-version migration compatibility,
we keep the bit set in host_features.
The result will be that a guest migrating cross-version
will see host features change under it.
As guests only seem to read it once, this should
not be an issue. Meanwhile, will work to fix guests to
ignore this bit in virtio1 mode, too.

Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-11-15 17:20:37 +02:00
Ladi Prosek
27e57efe32 virtio: rename virtqueue_discard to virtqueue_unpop
The function undoes the effect of virtqueue_pop and doesn't do anything
destructive or irreversible so virtqueue_unpop is a more fitting name.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-15 17:20:36 +02:00
Yuri Benditovich
68b5f314a2 net: skip virtio-net config of deleted nic's peers
https://bugzilla.redhat.com/show_bug.cgi?id=1373816
qemu core dump happens during repetitive unpug-plug
with multiple queues and Windows RSS-capable guest.
If back-end delete requested during virtio-net device
initialization, driver still can try configure the device
for multiple queues. The virtio-net device is expected
to be removed as soon as the initialization is done.

Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-11-15 15:36:21 +08:00
Emil Condrea
ba18fa2a8c xen: Rename xen_be_send_notify
Prepare xen_be_send_notify to be shared with frontends:
 * xen_be_send_notify -> xen_pv_send_notify

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28 17:54:21 -07:00
Emil Condrea
65807f4b6c xen: Rename xen_be_unbind_evtchn
Prepare xen_be_unbind_evtchn to be shared with frontends:
 * xen_be_unbind_evtchn -> xen_pv_unbind_evtchn

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28 17:54:11 -07:00
Emil Condrea
96c77dba6f xen: Rename xen_be_printf to xen_pv_printf
Prepare xen_be_printf to be used by both backend and frontends:
 * xen_be_printf -> xen_pv_printf

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28 17:53:50 -07:00
Emil Condrea
b9730c5b4e xen: Fix coding style warnings
Fixes:
 * WARNING: line over 80 characters

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28 17:52:39 -07:00
Emil Condrea
c22e91b1d8 xen: Fix coding style errors
Fixes the following errors:
 * ERROR: line over 90 characters
 * ERROR: code indent should never use tabs
 * ERROR: space prohibited after that open square bracket '['
 * ERROR: do not initialise statics to 0 or NULL
 * ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-10-28 17:52:29 -07:00
Prasad J Pandit
c7c3591669 net: rtl8139: limit processing of ring descriptors
RTL8139 ethernet controller in C+ mode supports multiple
descriptor rings, each with maximum of 64 descriptors. While
processing transmit descriptor ring in 'rtl8139_cplus_transmit',
it does not limit the descriptor count and runs forever. Add
check to avoid it.

Reported-by: Andrew Henderson <hendersa@icculus.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Li Qiang
fdda170e50 net: vmxnet: initialise local tx descriptor
In Vmxnet3 device emulator while processing transmit(tx) queue,
when it reaches end of packet, it calls vmxnet3_complete_packet.
In that local 'txcq_descr' object is not initialised, which could
leak host memory bytes a guest.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Kevin Wolf
c89d416a2b e1000e: Don't zero out buffer address in rx descriptor
The e1000e emulation zeroes out any used rx descriptor and then writes a
completely newly constructed value there. By doing this, it doesn't only
update the write-back area of the descriptors (as it's supposed to do),
but it also clears the buffer address, which real hardware doesn't do.

The spec explicitly mentions in chapter 7.1.8 that it is valid for a
driver to reuse a descriptor and only update the status field while
doing so, i.e. reusing the old buffer address:

    If software statically allocates buffers, and uses memory read to
    check for completed descriptors, it simply has to zero the status
    byte in the descriptor to make it ready for reuse by hardware.

This patch fixes the behaviour to leave the buffer address in
descriptors unchanged even after the descriptor has been used.

Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Prasad J Pandit
8caed3d564 net: rocker: set limit to DMA buffer size
Rocker network switch emulator has test registers to help debug
DMA operations. While testing host DMA access, a buffer address
is written to register 'TEST_DMA_ADDR' and its size is written to
register 'TEST_DMA_SIZE'. When performing TEST_DMA_CTRL_INVERT
test, if DMA buffer size was greater than 'INT_MAX', it leads to
an invalid buffer access. Limit the DMA buffer size to avoid it.

Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Li Qiang
2634ab7fe2 net: eepro100: fix memory leak in device uninit
The exit dispatch of eepro100 network card device doesn't free
the 's->vmstate' field which was allocated in device realize thus
leading a host memory leak. This patch avoid this.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Prasad J Pandit
67aa449344 net: pcnet: fix source formatting and indentation
Fix indentations and source format at few places. Add braces
around 'if' and 'while' statements.

Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Prasad J Pandit
34e29ce754 net: pcnet: check rx/tx descriptor ring length
The AMD PC-Net II emulator has set of control and status(CSR)
registers. Of these, CSR76 and CSR78 hold receive and transmit
descriptor ring length respectively. This ring length could range
from 1 to 65535. Setting ring length to zero leads to an infinite
loop in pcnet_rdra_addr() or pcnet_transmit(). Add check to avoid it.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-10-26 09:57:59 +08:00
Halil Pasic
5705653ff8 virtio: cleanup VMSTATE_VIRTIO_DEVICE
Now all the usages of the old version of VMSTATE_VIRTIO_DEVICE are gone,
so we can get rid of the conditionals, and the old macro.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 02:21:43 +03:00
Halil Pasic
4d45dcfbf2 virtio-net: convert VMSTATE_VIRTIO_DEVICE
Use the new VMSTATE_VIRTIO_DEVICE macro.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 02:21:42 +03:00
Greg Kurz
fa5e56c2a7 virtio-net: handle virtio_net_flush_tx() errors
All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.

If this happens, virtio_net_flush_tx() also returns -EINVAL, so that all
callers can stop processing the virtqueue immediatly.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 01:16:59 +03:00
Greg Kurz
ba10b9c003 virtio-net: handle virtio_net_receive() errors
All these errors are caused by a buggy guest: let's switch the device to
the broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 01:16:59 +03:00
Greg Kurz
ba7eadb592 virtio-net: handle virtio_net_handle_ctrl() error
This error is caused by a buggy guest: let's switch the device to the
broken state instead of terminating QEMU. Also we detach the element
from the virtqueue and free it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-10 01:16:59 +03:00
Alistair Francis
79b2ac8f28 cadence_gem: Fix priority queue out of bounds access
There was an error with some of the register implementation assuming
there are 16 priority queues supported when the IP only supports 8. This
patch corrects the registers to only support 8 queues.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 33bf2d28326d22875602234b8b15cf56fb678333.1474911607.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-04 13:28:09 +01:00
Paolo Bonzini
fa26f01839 imx_fec: fix error in qemu_send_packet argument
This uses the wrong frame size for packets composed of multiple
descriptors.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Paolo Bonzini
a16d8ef54b mcf_fec: fix error in qemu_send_packet argument
This uses the wrong frame size for packets composed of multiple
descriptors.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Prasad J Pandit
070c4b92b8 net: mcf: limit buffer descriptor count
ColdFire Fast Ethernet Controller uses buffer descriptors to manage
data flow to/fro receive & transmit queues. While transmitting
packets, it could continue to read buffer descriptors if a buffer
descriptor has length of zero and has crafted values in bd.flags.
Set upper limit to number of buffer descriptors.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman
b38636b837 e1000e: Fix EIAC register implementation
This patch fixes 2 issues:

1. Bits set in EIAC register should be cleared
   from IMS when EIAM is not used.
2. Only bit that corresonds to the interrupt being
   raised should be cleared.

See spec. 10.2.4.7 Interrupt Auto Clear

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman
4100c026b6 e1000e: Fix spurious RX TCP ACK interrupts
Do not raise ACK interrupts when
RFCTL.ACKDIS bit is set (see spec. 10.2.5.16).

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman
8b54c6e187 e1000e: Fix OTHER interrupts processing for MSI-X
Interrupt mask for legacy OTHER causes should
not apply to MSI-X OTHER cause.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman
680e60b6ba e1000e: Fix PBACLR implementation
This patch fixes incorrect check for
interrypt type being used.

PBSCLR register is valid for MSI-X only.

See spec. 10.2.3.13 MSI—X PBA Clear

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman
2d803144a6 e1000e: Fix CTRL_EXT.EIAME behavior
CTRL_EXT.EIAME bit controls clearing of IAM bits,
but current code clears IMS bits instead.

See spec. 10.2.2.5 Extended Device Control Register.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman
40364748dd e1000e: Flush receive queues on link up
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Dmitry Fleytman
6ee0e20b65 e1000e: Flush all receive queues on receive enable
Before this patch first netdev queue only was flushed.

Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Gonglei
fb56d323e2 e1000: fix buliding complaint
hw/net/e1000e_core.c:56: warning: e1000e_set_interrupt_cause declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of e1000e_set_interrupt_cause was here

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:22 +08:00
Michael S. Tsirkin
1c0fbfa3de virtio-net: allow increasing rx queue size
This allows increasing the rx queue size up to 1024: unlike with tx,
guests don't put in huge S/G lists into RX so the risk of running into
the max 1024 limitation due to some off-by-one seems small.

It's helpful for users like OVS-DPDK which don't do any buffering on the
host - 1K roughly matches 500 entries in tun + 256 in the current rx
queue, which seems to work reasonably well. We could probably make do
with ~750 entries but virtio spec limits us to powers of two.
It might be a good idea to specify an s/g size limit in a future
version.

It also might be possible to make the queue size smaller down the road, 64
seems like the minimal value which will still work (as guests seem to
assume a queue full of 1.5K buffers is enough to process the largest
incoming packet, which is ~64K).  No one actually asked for this, and
with virtio 1 guests can reduce ring size without need for host
configuration, so don't bother with this for now.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Jason Wang <jasowang@redhat.com>
Suggested-by: Patrik Hermansson <phermansson@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27 17:54:21 +08:00
Peter Maydell
c229472af0 ppc patch queue 2016-09-23
This pull request supersedes ppc-for-2.8-20160922.  There was a clang
 build error in that, and I've also added one extra patch in the new pull.
 
 Included in this set of ppc and spapr patches are:
     * TCG implementations for more POWER9 instructions
     * Some preliminary XICS fixes in preparataion for the pnv machine type
     * A significant ADB (Macintosh kbd/mouse) cleanup
     * Some conversions to use trace instead of debug macros
     * Fixes to correctly handle global TLB flush synchronization in
       TCG.  This is already a bug, but it will have much more impact
       when we get MTTCG
     * Add more qtest testcases for Power
     * Some MAINTAINERS updates
     * Assorted bugfixes
     * Add the basics of NUMA associativity to the spapr PCI host bridge
 
 This touches some test files and monitor.c which are technically
 outside the ppc code, but coming through this tree because the changes
 are primarily of interest to ppc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJX5NZnAAoJEGw4ysog2bOSoLEP/1YpRFG/6gmiT+T+Btz1QYcd
 eqrJkV63/rY/lvgZOvUBdqA/YKaBSWDOEByNFRZ+Grqz9h5zKrRcmM7IWdRWg+vG
 gyrZUm1pscFG20iGNcenxB8mD0VMk7C77gnUlv12bo+mK+1D1i8eUfKLFqxb0kOx
 JGIRQNG5orF5vZxsyjRPVpvMS9gNG90vrPIypux4ryozCVMWbrjXRZNsPQKz8wb9
 UGcJIFB6R6JVbmBGchi434PEJkcdZzP/a0HvVSO51oGsFBnwYwQ7XVc3PyA4KCD7
 tTbm6T2Rpdak3Pcd/nuzoXCMBCkh48XGKxZ+yPuLXGG5ZGIZ6rzlHPqBsEqqiLz5
 DLzbsxKyLHX2Af87js4J9OXkoNQI4rVGurvNbkQ7IMQ2/Xt97kgUEgr3W0Vj+r82
 bqIqWm4OdJ9cDzTGVlQ7l2vLv6RMe7DrkeWRNEKZZgfir7Hgj1gr79BOe96ETKBd
 7r/1z0fBkZoWSq2OdjX8RouXMwd1Nq3FnqYv2BQ99rvM/AqpkY0HYsPIfUilHq6T
 ZXhvm/4LIEev0F/GiJvV5jHHg637QS4QqdyglF8ODC8vSMvOThhL9Gj7EMgJs7hj
 Ywt1B5y88//Zq4+IGVda98J5ynOZO1CArvzoYR5UMnWiq2K0Lxpq7wemE/finyIK
 0jWLqlmCmYRzsS+oQEg/
 =et1C
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20160923' into staging

ppc patch queue 2016-09-23

This pull request supersedes ppc-for-2.8-20160922.  There was a clang
build error in that, and I've also added one extra patch in the new pull.

Included in this set of ppc and spapr patches are:
    * TCG implementations for more POWER9 instructions
    * Some preliminary XICS fixes in preparataion for the pnv machine type
    * A significant ADB (Macintosh kbd/mouse) cleanup
    * Some conversions to use trace instead of debug macros
    * Fixes to correctly handle global TLB flush synchronization in
      TCG.  This is already a bug, but it will have much more impact
      when we get MTTCG
    * Add more qtest testcases for Power
    * Some MAINTAINERS updates
    * Assorted bugfixes
    * Add the basics of NUMA associativity to the spapr PCI host bridge

This touches some test files and monitor.c which are technically
outside the ppc code, but coming through this tree because the changes
are primarily of interest to ppc.

# gpg: Signature made Fri 23 Sep 2016 08:14:47 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.8-20160923: (45 commits)
  spapr_pci: Add numa node id
  monitor: fix crash for platforms without a CPU 0
  linux-user: ppc64: fix ARCH_206 bit in AT_HWCAP
  ppc/kvm: Mark 64kB page size support as disabled if not available
  ppc/xics: An ICS with offset 0 is assumed to be uninitialized
  ppc/xics: account correct irq status
  Enable H_CLEAR_MOD and H_CLEAR_REF hypercalls on KVM/PPC64.
  target-ppc: tlbie/tlbivax should have global effect
  target-ppc: add flag in check_tlb_flush()
  target-ppc: add TLB_NEED_LOCAL_FLUSH flag
  spapr: Introduce sPAPRCPUCoreClass
  target-ppc: implement darn instruction
  target-ppc: add stxsi[bh]x instruction
  target-ppc: add lxsi[bw]zx instruction
  target-ppc: add xxspltib instruction
  target-ppc: consolidate store conditional
  target-ppc: move out stqcx impementation
  target-ppc: consolidate load with reservation
  target-ppc: convert st[16,32,64]r to use new macro
  target-ppc: convert st64 to use new macro
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-23 14:26:12 +01:00
Laurent Vivier
e8bb33de42 spapr_llan: convert to trace framework instead of DPRINTF
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-23 10:29:40 +10:00
Alistair Francis
77524d1157 cadence_gem: Correct indentation
Fix up the indentation inside the for loop that was introduced in the previous
patch. This commit is almost empty if viewed using 'git show -w', except for a
few changes that were required to avoid the 80 charecter line limit.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: b40d1b12d24be9f0ac5d72f86249103e0c1c720a.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis
6710172501 cadence_gem: Add queue support
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 28921252217b1d14f16889bafa88675f5b7a66cb.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis
e8e4994313 cadence_gem: Add support for screening
The Cadence GEM hardware allows incoming data to be 'screened' based on some
register values. Add support for these screens.

We also need to increase the max regs to avoid compilation failures. These new
registers are implemented in the next patch.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 73e69a8ad9fa2763e9f68f71eaf2469dd5744fcc.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis
2bf57f73e3 cadence_gem: Add the num-priority-queues property
The Cadence GEM hardware supports N number priority queues, this patch is a
step towards that by adding the property to set the queues. At the moment
behaviour doesn't change as we only use queue 0.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 6543ec0d0c4bfd2678d0ed683efb197e91b17733.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Alistair Francis
bcb39a65f1 cadence_gem: QOMify Cadence GEM
The sysbus_init_irq() call will eventually depend on a property so it needs to
be in the realize function.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 486595809cf416d18a750aafbcfa1c81d7160c59.1469727764.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:07 +01:00
Dmitry Osipenko
e7ea81c37d hw/ptimer: Introduce timer policy feature
Some of the timer devices may behave differently from what ptimer
provides. Introduce ptimer policy feature that allows ptimer users to
change default and wrong timer behaviour, for example to continuously
trigger periodic timer when load value is equal to "0".

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 994cd608ec392da6e58f0643800dda595edb9d97.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00
Changlong Xie
eb83c2030a hw/net/e1000e: Fix compiler warning
slave:~/.xie/qemu-colo # gcc --version
gcc (SUSE Linux) 4.3.4 [gcc-4_3-branch revision 152973]

slave:~/.xie/qemu-colo # make -j8
CC    hw/net/e1000e_core.o
hw/net/e1000e_core.c:56: warning: ‘e1000e_set_interrupt_cause’ declared inline after being called
hw/net/e1000e_core.c:56: warning: previous declaration of ‘e1000e_set_interrupt_cause’ was here
LINK  x86_64-softmmu/qemu-system-x86_64

Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-13 18:12:34 +03:00
Laurent Vivier
32f5f50dad spapr: implement H_CHANGE_LOGICAL_LAN_MAC h_call
Since kernel v4.0, linux uses H_CHANGE_LOGICAL_LAN_MAC to change lively
the MAC address of an ibmveth interface.

As QEMU doesn't implement this h_call, we can't change anymore the
MAC address of an spapr-vlan interface.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-09-07 12:40:13 +10:00
Cao jin
e0af5a0e8b e1000e: remove internal interrupt flag
Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX
is not necessary too, remove it now. And interrupt flag field intr_state also
can be removed now.

CC: Dmitry Fleytman <dmitry@daynix.com>
CC: Jason Wang <jasowang@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-22 16:06:08 +08:00
Li Qiang
47882fa497 net: vmxnet: use g_new for pkt initialisation
When network transport abstraction layer initialises pkt, the maximum
fragmentation count is not checked. This could lead to an integer
overflow causing a NULL pointer dereference. Replace g_malloc() with
g_new() to catch the multiplication overflow.

Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Acked-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-18 12:05:18 +08:00
Laurent Vivier
e723b87103 trace-events: fix first line comment in trace-events
Documentation is docs/tracing.txt instead of docs/trace-events.txt.

find . -name trace-events -exec \
     sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \
     {} \;

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-08-12 10:36:01 +01:00