Fixes: 286a5d201e
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This adds proper support for float samples in mixeng by adding a new
audio format for it.
Limitations: only native endianness is supported. None of the virtual
sound cards support float samples (it looks like most of them only
support 8 and 16 bit, only hda supports 32 bit), it is only used for the
audio backends (i.e. host side).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 8a8b0b5698401b78d3c4c8ec90aef83b95babb06.1580672076.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The combined generic buffer management code and buffer run out
code in function audio_generic_put_buffer_out has a problematic
behaviour. A few hundred milliseconds after playback starts the
mixing buffer and the generic buffer are nearly full and the
following pattern can be seen.
On first call of audio_pcm_hw_run_out the buffer run code in
audio_generic_put_buffer_out writes some data to the audio
hardware but the generic buffer will fill faster and is full
when audio_pcm_hw_run_out returns. This is because emulated
audio devices can produce playback data at a higher rate than
the audio backend hardware consumes this data.
On next call of audio_pcm_hw_run_out the buffer run code in
audio_generic_put_buffer_out writes some data to the audio
hardware but no audio data is transferred to the generic buffer
because the buffer is already full.
Then the pattern repeats. For the emulated audio device this
looks like the audio timer period has doubled.
This patch splits the combined generic buffer management code
and buffer run out code and calls the buffer run out code after
buffer management code to break this pattern.
The bug report is for the wav audio backend. But the problem is
not limited to this backend. All audio backends which use the
audio_generic_put_buffer_out function show this problem.
Buglink: https://bugs.launchpad.net/qemu/+bug/1858488
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Which currently only means removing some checks. Old code won't require
more than two channels, but new code will need it.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 7e53be1f97e939ed3bb729ef39e76b775643118a.1570996490.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The bit shifting trick worked because the number of bytes per frame was
always a power-of-two (since QEMU only supports mono, stereo and 8, 16
and 32 bit samples). But if we want to add support for surround sound,
this no longer holds true.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 1351fd9bcce0ff20d81850c5292722194329de02.1570996490.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This way we no longer need vararg functions, improving compile time
error detection. Also now it's possible to check actually what commands
are supported, without needing to manually update ctl_caps.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 2b08b3773569c5be055d0a0fb2f29ff64e79f0f4.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
They just called audio_pcm_sw_read/write anyway, so it makes no sense
to have them too. (The noaudio's read is the only exception, but it
should work with the generic code too.)
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 92ddc98133bc4b687c6e4608b9321e7b64c0e496.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
audio_run is called manually by alsa and oss backends when polling.
In this case only the requesting backend should be run, not all of them.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 10221fcea2028fa18d95cf531526ffe3b1d9b21a.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's already a MIN and MAX macro in include/qemu/osdep.h, use them
instead.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 303222477df6f7373217e0df768635fab5855745.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio drivers now get an Audiodev * as config paramters, instead of the
global audio_option structs. There is some code in audio/audio_legacy.c
that converts the old environment variables to audiodev options (this
way backends do not have to worry about legacy options). It also
contains a replacement of -audio-help, which prints out the equivalent
-audiodev based config of the currently specified environment variables.
Note that backends are not updated and still rely on environment
variables.
Also note that (due to moving try-poll from global to backend specific
option) currently ALSA and OSS will always try poll mode, regardless of
environment variables or -audiodev options.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: e99a7cbdac0d13512743880660b2032024703e4c.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum. This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.
This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Both GCC v4.8 and Clang v3.4 support the -Waddress option, so we do
not need the compiler version check here anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add registry for audio drivers, using the existing audio_driver struct.
Make all drivers register themself. The old list of audio_driver struct
pointers is now a list of audio driver names, specifying the priority
(aka probe order) in case no driver is explicitly asked for.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-2-kraxel@redhat.com
Apparently we don't use __MSC_VER as a compiler anymore and we always
require a C99 compiler (which means we always have __func__) so we don't
need a special AUDIO_FUNC macro. We can just replace AUDIO_FUNC with
__func__ instead.
Checkpatch failures were manually fixed.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180203084315.20497-2-armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453138432-8324-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the opaque pointer returned by audio_driver's init is only
exposed to the driver's fini, but not to audio_pcm_ops. This way if
someone wants to share a variable with the driver and the pcm, he must
use global variables. This patch fixes it by adding a third parameter to
audio_pcm_op's init_out and init_in.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function cannot fail, so the check is superfluous.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1433400324-7358-10-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Touching char/char.h basically causes the whole of QEMU to
be rebuilt. Avoid this, it is usually unnecessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Various header files rely on qemu-char.h including qemu-config.h or
main-loop.h, but they really do not need qemu-char.h at all (particularly
interesting is the case of the block layer!). Clean this up, and also
add missing inclusions of qemu-char.h itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor the volume mixing, so it can be reused for capturing devices.
Additionally, it removes superfluous multiplications with the nominal
volume within the hardware voice code path.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: malc <av1474@comtv.ru>
snd_pcm_start() starts the capture process and ensures that the events
are delivered to the poll handler. Without the call, capture can be started
only when there is simultaneous playback running.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: malc <av1474@comtv.ru>
Playback control function did not disable polling when playback stops.
Caused busy spinning of the main loop due to unprocessed events.
Signed-off-by: Jindrich Makovicka <makovick@gmail.com>
Signed-off-by: malc <av1474@comtv.ru>
Additional argument (whether to try poll mode) is only passed with
VOICE_ENABLE command.
Thanks to Markus Armbruster for noticing the potential breakage.
pcm_ops.run_out now takes number of live samples (which will be always
greater than zero) as a second argument, every driver was calling
audio_pcm_hw_get_live_out anyway with exception of fmod which used
audio_pcm_hw_get_live_out2 for no good reason.
Signed-off-by: malc <av1474@comtv.ru>
Both input and output streams may be in SND_PCM_STATE_SUSPENDED
after the host is suspended and resumed, meaning "Hardware is
suspended". snd_pcm_readi() and snd_pcm_writei() will return
-ESTRPIPE if called while the stream is in this state.
Call snd_pcm_resume() to enable audio output and capture after
host resume.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: malc <av1474@comtv.ru>
/usr/include/alsa/pcm.h contains:
#define snd_pcm_sw_params_alloca(ptr) do { assert(ptr); *ptr = (snd_pcm_sw_params_t *) alloca(snd_pcm_sw_params_sizeof()); memset(*ptr, 0, snd_pcm_sw_params_sizeof()); } while (0)
The assert generates: "error: the address of 'sw_params' will always
evaluate as 'true'" which combined with -Werror prevents alsaaudio.o
from being built with certain versions of GCC.
