In some cases, bdrv_co_get_block_status() is called recursively for the
whole backing chain. The automatically inserted bdrv_commit_top filter
driver must not stop the recursion, so implement a callback that simply
forwards the request to bs->backing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This fixes bdrv_co_get_block_status() for the bdrv_mirror_top block
driver, which must fall through to bs->backing instead of bs->file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If bdrv_is_allocated() fails, we should react to that failure.
For 2 of the 3 callers, reporting the error was easy. But in
cluster_was_modified() and its lone caller
get_cluster_count_for_direntry(), it's rather invasive to update
the logic to pass the error back; so there, I went with merely
documenting the issue by changing the return type to bool (in
all likelihood, treating the cluster as modified will then
trigger a read which will also fail, and eventually get to an
error - but given the appalling number of abort() calls in this
code, I'm not making it any worse).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If bdrv_is_allocated() fails, we should immediately do the backup
error action, rather than attempting backup_do_cow() (although
that will likely fail too).
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The driver has failed to build since commit da34e65, in qemu 2.6,
due to a missing include of qapi/error.h for error_setg().
Since no one has complained in three releases, it is easier to
remove the dead code than to keep it around, especially since it
is not being built by default and therefore prone to bitrot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockLimits.max_transfer can be too high without this fix, guest will
encounter I/O error or even get paused with werror=stop or rerror=stop. The
cause is explained below.
Linux has a separate limit, /sys/block/.../queue/max_segments, which in
the worst case can be more restrictive than the BLKSECTGET which we
already consider (note that they are two different things). So, the
failure scenario before this patch is:
1) host device has max_sectors_kb = 4096 and max_segments = 64;
2) guest learns max_sectors_kb limit from QEMU, but doesn't know
max_segments;
3) guest issues e.g. a 512KB request thinking it's okay, but actually
it's not, because it will be passed through to host device as an
SG_IO req that has niov > 64;
4) host kernel doesn't like the segmenting of the request, and returns
-EINVAL;
This patch checks the max_segments sysfs entry for the host device and
calculates a "conservative" bytes limit using the page size, which is
then merged into the existing max_transfer limit. Guest will discover
this from the usual virtual block device interfaces. (In the case of
scsi-generic, it will be done in the INQUIRY reply interception in
device model.)
The other possibility is to actually propagate it as a separate limit,
but it's not better. On the one hand, there is a big complication: the
limit is per-LUN in QEMU PoV (because we can attach LUNs from different
host HBAs to the same virtio-scsi bus), but the channel to communicate
it in a per-LUN manner is missing down the stack; on the other hand,
two limits versus one doesn't change much about the valid size of I/O
(because guest has no control over host segmenting).
Also, the idea to fall back to bounce buffering in QEMU, upon -EINVAL,
was explored. Unfortunately there is no neat way to ensure the bounce
buffer is less segmented (in terms of DMA addr) than the guest buffer.
Practically, this bug is not very common. It is only reported on a
Emulex (lpfc), so it's okay to get it fixed in the easier way.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently backup to nbd target is broken, as nbd doesn't have
.bdrv_get_info realization.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_set_backing_hd failure needn't be abort. Since we already have
error parameter, use it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have an errp and bdrv_root_attach_child can fail permission check,
error_abort is not the best choice here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QAPI type SocketAddressFlat differs from SocketAddress pointlessly:
the discriminator value for variant InetSocketAddress is 'tcp' instead
of 'inet'. Rename.
The type is so far only used by the Gluster block drivers. Take care
to keep 'tcp' working in things like -drive's file.server.0.type=tcp.
The "gluster+tcp" URI scheme in pseudo-filenames stays the same.
blockdev-add changes, but it has changed incompatibly since 2.8
already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As its documentation says, it's not specific to Gluster. Rename it,
as I'm going to use it for something else.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To reproduce, run
$ valgrind qemu-system-x86_64 --nodefaults -S --drive driver=gluster,volume=testvol,path=/a/b/c,server.0.type=xxx
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_gluster_glfs_init() passes the names of QAPI enumeration type
SocketTransport to glfs_set_volfile_server(). Works, because they
were chosen to match. But the coupling is artificial. Use the
appropriate literal strings instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This permits configuration with driver-specific options in addition to
pseudo-filename parsed as URI. For instance,
--drive driver=sheepdog,host=fido,vdi=dolly
instead of
--drive driver=sheepdog,file=sheepdog://fido/dolly
It's also a first step towards supporting blockdev-add.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() builds a string from host and port parts for
inet_connect(). inet_connect() parses it into host, port and options.
Whether this gets exactly the same host, port and no options for all
inputs is not obvious.
Cut out the string middleman and build a SocketAddress for
socket_connect() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Errors in the pseudo-filename are all reported with the same laconic
"Can't parse filename" message.
Add real error reporting, such as:
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepdog:///
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepdog:///: missing file path in URI
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepgod:///vdi
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepgod:///vdi: URI scheme must be 'sheepdog', 'sheepdog+tcp', or 'sheepdog+unix'
$ qemu-system-x86_64 --drive driver=sheepdog,filename=sheepdog+unix:///vdi?socke=sheepdog.sock
qemu-system-x86_64: --drive driver=sheepdog,filename=sheepdog+unix:///vdi?socke=sheepdog.sock: unexpected query parameters
The code to translate legacy syntax to URI fails to escape URI
meta-characters. The new error messages are misleading then. Replace
them by the old "Can't parse filename" message. "Internal error"
would be more honest. Anyway, no worse than before. Also add a FIXME
comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() truncates long VDI names silently. Reject them
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_parse_uri() and sd_snapshot_goto() screw up error checking after
strtoul(), and truncate long tag names silently. Fix by replacing
those parts by new sd_parse_snapid_or_tag(), which checks more
carefully.
sd_snapshot_delete() also parses snapshot IDs, but is currently too
broken for me to touch. Mark TODO.
Two calls of strtol() without error checking remain in
parse_redundancy(). Mark them FIXME.
More silent truncation of configuration strings remains elsewhere.
Not marked.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sd_snapshot_delete() should delete the snapshot whose ID matches
@snapshot_id and whose name matches @name. But that's not what it
does. If @snapshot_id is a valid ID, it deletes the snapshot with
that ID, else it deletes the snapshot with that name. It doesn't use
@name at all. Add suitable FIXME comments, so someone who actually
knows Sheepdog can fix it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a bdrv_create() method, sd_create() must set an error and return
negative errno on failure. It prints the error instead of setting it
when connect_to_sdog() fails. Fix that.
While there, return the value of connect_to_sdog() like we do
elsewhere, instead of -EIO. No functional change, as
connect_to_sdog() returns no other error code.
Many more suspicious uses of error_report() and error_report_err()
remain in other functions. Left for another day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a bdrv_snapshot_delete() method, sd_snapshot_delete() must set an
error and return negative errno on failure. It sometimes returns -1,
and sometimes neglects to set an error. It also prints error messages
with error_report(). Fix all that.
Moreover, its handling of an attempt to delete a nonexistent snapshot
is wrong: it error_report()s and succeeds. Fix it to set an error and
return -ENOENT instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qemu_opts_absorb_qdict() fails, sd_open() closes stdin, because
sd->fd is still zero. Fortunately, qemu_opts_absorb_qdict() can't
fail, because:
1. it only fails when qemu_opt_parse() fails, and
2. the only member of runtime_opts.desc[] is a QEMU_OPT_STRING, and
3. qemu_opt_parse() can't fail for QEMU_OPT_STRING.
Defuse this ticking time bomb by jumping behind the file descriptor
cleanup on error.
Also do that for the error paths where sd->fd is still -1. The file
descriptor cleanup happens to do nothing then, but let's not rely on
that here.
While there, rename label out to err, because it's on the error path,
not the normal path out of the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When adding an Error parameter, bdrv_replace_in_backing_chain() would
become nothing more than a wrapper around change_parent_backing_link().
So make the latter public, renamed as bdrv_replace_node(), and remove
bdrv_replace_in_backing_chain().
Most of the callers just remove a node from the graph that they just
inserted, so they can use &error_abort, but completion of a mirror job
with 'replaces' set can actually fail.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
mirror_top_bs must be removed from the graph again when creating the
dirty bitmap fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
mirror_top_bs takes write permissions on its backing file, which can
make it impossible to attach that backing file node to another parent.
However, this is exactly what needs to be done in order to remove
mirror_top_bs from the backing chain. So give up the write permission
first.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'replaces' option of drive-mirror can be used to mirror a Quorum
node to a new image and then let the target image replace one of the
Quorum children. In order for this graph modification to succeed, the
mirror job needs to lift its restrictions on the target node first
before actually replacing the child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Apparently some kind of mismerge happened in commit 8dfba279, which
broke the error handling without any real reason by removing the
assignment of the return value to ret in a blk_insert_bs() call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The split between tests/test-qobject-input-visitor.c and
tests/test-qobject-input-strict.c now makes less sense than ever. The
next commit will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
This adds support for three additional options that may be specified
by QAPI in blockdev-add:
server: host, port
auth method: either 'cephx' or 'none'
The "server" and "auth-supported" QAPI parameters are arrays. To conform
with the rados API, the array items are join as a single string with a ';'
character as a delimiter when setting the configuration values.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Aborting on error in bdrv_append() isn't correct. This patch fixes it
and lets the callers handle failures.
Test case 085 needs a reference output update. This is caused by the
reversed order of bdrv_set_backing_hd() and change_parent_backing_link()
in bdrv_append(): When the backing file of the new node is set, the
parent nodes are still pointing to the old top, so the backing blocker
is now initialised with the node name rather than the BlockBackend name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Not all callers of bdrv_set_backing_hd() know for sure that attaching
the backing file will be allowed by the permission system. Return the
error from the function rather than aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds an assertion that ensures that the necessary resize permission
has been granted before bdrv_truncate() is called.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This adds assertions that ensure that the necessary write permissions
have been granted before someone attempts to write to a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is where we want to check the permissions, so we need to have the
BdrvChild around where they are stored.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The HMP command 'qemu-io' is a bit tricky because it wants to work on
the original BlockBackend, but additional permissions could be required.
The details are explained in a comment in the code, but in summary, just
request whatever permissions the current qemu-io command needs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-commit allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Management tools need to be able to know about every node in the graph
and need a way to address them. Changing the graph structure was okay
because libvirt doesn't really manage the node level yet, but future
libvirt versions need to deal with both new and old version of qemu.
This new option to blockdev-mirror allows the client to set a node-name
for the automatically inserted filter driver, and at the same time
serves as a witness for a future libvirt that this version of qemu does
automatically insert a filter driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The correct permissions are relatively obvious here (and explained in
code comments). For intermediate streaming, we need to reopen the top
node read-write before creating the job now because the permissions
system catches attempts to get the BLK_PERM_WRITE_UNCHANGED permission
on a read-only node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The mirror block job is mainly used for two different scenarios:
Mirroring to an otherwise unused, independent target node, or for active
commit where the target node is part of the backing chain of the source.
Similarly to the commit block job patch, we need to insert a new filter
node to keep the permissions correct during active commit.
Note that one change this implies is that job->blk points to
mirror_top_bs as its root now, and mirror_top_bs (rather than the actual
source node) contains the bs->job pointer. This requires qemu-img commit
to get the job by name now rather than just taking bs->job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
The backup block job doesn't have very complicated requirements: It
needs to read from the source and write to the target, but it's fine
with either side being changed. The only restriction is that we can't
resize the image because the job uses a cached value.
qemu-iotests 055 needs to be changed because it used a target which was
already attached to a virtio-blk device. The permission system correctly
forbids this (virtio-blk can't accept another writer with its default
share-rw=off).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This is a little simpler than the commit block job because it's
synchronous and only commits into the immediate backing file, but
otherwise doing more or less the same.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This is probably one of the most interesting conversions to the new
op blocker system because a commit block job intentionally leaves some
intermediate block nodes in the backing chain that aren't valid on their
own any more; only the whole chain together results in a valid view.
In order to provide the 'consistent read' permission to the parents of
the 'top' node of the commit job, a new filter block driver is inserted
above 'top' which doesn't require 'consistent read' on its backing
chain. Subsequently, the commit job can block 'consistent read' on all
intermediate nodes without causing a conflict.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Block jobs don't actually do I/O through the the reference they create
with block_job_add_bdrv(), but they might want to use the permisssion
system to express what the block job does to intermediate nodes. This
adds permissions to block_job_add_bdrv() to provide the means to request
permissions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
For meaningful error messages in the permission system, we need to get
some human-readable description of the parent of a BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
This functions creates a BlockBackend internally, so the block jobs need
to tell it what they want to do with the BB.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Some devices allow a media change between read-only and read-write
media. They need to adapt the permissions in their .change_media_cb()
implementation, which can fail. So add an Error parameter to the
function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We can figure out the necessary permissions from the flags that the
caller passed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
