For the first target page, all_zero is set to true for this round check.
After target_pages introduced, we could leverage this variable instead
of checking the address offset.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In postcopy, it requires to place whole host page instead of target
page.
Currently, it relies on the page offset to decide whether this is the
last target page. We also can count the target page number during the
iteration. When the number of target page equals
(host page size / target page size), this means it is the last target
page in the host page.
This is a preparation for non-ordered target page transmission.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Compress is not supported with postcopy, it is safe to wait for
decompress thread just in precopy.
This is a preparation for later patch.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In this case, page_buffer content would not be used.
Skip this to save some time.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Usually, incoming migration coroutine yields to the main loop
while its IO-channel is waiting for data to receive. But there is a case
when RAM migration and data receive have the same speed: VM with huge
zeroed RAM. In this case, IO-channel won't read and thus the main loop
is stuck and for instance, it doesn't respond to QMP commands.
For this case, yield periodically, but not too often, so as not to
affect the speed of migration.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
savevm_state's SaveStateEntry TAILQ is a priority queue. Priority
sorting is maintained by searching from head to tail for a suitable
insertion spot. Insertion is thus an O(n) operation.
If we instead keep track of the head of each priority's subqueue
within that larger queue we can reduce this operation to O(1) time.
savevm_state_handler_remove() becomes slightly more complex to
accomodate these gains: we need to replace the head of a priority's
subqueue when removing it.
With O(1) insertion, booting VMs with many SaveStateEntry objects is
more plausible. For example, a ppc64 VM with maxmem=8T has 40000 such
objects to insert.
Signed-off-by: Scott Cheloha <cheloha@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Create a function to abstract common logic needed when removing a
SaveStateEntry element from the savevm_state.handlers queue.
For now we just remove the element. Soon it will involve additional
cleanup.
Signed-off-by: Scott Cheloha <cheloha@linux.vnet.ibm.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The current check sets an error but doesn't fail the command.
This may cause a problem if new connection attempt by the same URI
affects the first connection.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Clang does not like qmp_migrate_set_downtime()'s code to clamp double
@value to 0..INT64_MAX:
qemu/migration/migration.c:2038:24: error: implicit conversion from 'long' to 'double' changes value from 9223372036854775807 to 9223372036854775808 [-Werror,-Wimplicit-int-float-conversion]
The warning will be enabled by default in clang 10. It is not
available for clang <= 9.
The clamp is actually useless; @value is checked to be within
0..MAX_MIGRATE_DOWNTIME_SECONDS immediately before. Delete it.
While there, make the conversion from double to int64_t explicit.
Signed-off-by: Fangrui Song <i@maskray.me>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Patch split, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When using hugepages, rate limiting is necessary within each huge
page, since a 1G huge page can take a significant time to send, so
you end up with bursty behaviour.
Fixes: 4c011c37ec ("postcopy: Send whole huge pages")
Reported-by: Lin Ma <LMa@suse.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
ram_save_queue_pages() has an 'err' label that can be replaced by
'return -1' instead.
Same thing with ram_discard_range(), and in this case we can also
get rid of the 'ret' variable and return either '-1' on error
or the result of ram_block_discard_range().
CC: Juan Quintela <quintela@redhat.com>
CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
If we are exiting due to an error/finish/.... Just don't try to even
touch the channel with one IO operation.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fill everything with zero, so the padding fields are also initialized.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Replace DeviceState dependency with VMStateIf on vmstate API.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Use WITH_RCU_READ_LOCK_GUARD to avoid exiting colo_init_ram_cache
without releasing RCU.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
../migration/ram.c: In function ‘multifd_recv_thread’:
/home/elmarco/src/qq/include/qapi/error.h:165:5: error: ‘block’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
165 | error_setg_internal((errp), __FILE__, __LINE__, __func__, \
| ^~~~~~~~~~~~~~~~~~~
../migration/ram.c:818:15: note: ‘block’ was declared here
818 | RAMBlock *block;
| ^~~~~
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to ram block writeback for pmem migration.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20191121000843.24844-4-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
.dev_unplug_pending is set up by virtio-net code indepent of failover
support was set for the device or not. This gives a wrong result when
we check for existing primary devices in migration code.
Fix this by actually calling dev_unplug_pending() instead of just
checking if the function pointer was set. When the feature was not
negotiated dev_unplug_pending() will always return false. This prevents
us from going into the wait-unplug state when there's no primary device
present.
Fixes: 9711cd0dfc ("net/virtio: add failover support")
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch adds a new migration state called wait-unplug. It is entered
after the SETUP state if failover devices are present. It will transition
into ACTIVE once all devices were succesfully unplugged from the guest.
So if a guest doesn't respond or takes long to honor the unplug request
the user will see the migration state 'wait-unplug'.
In the migration thread we query failover devices if they're are still
pending the guest unplug. When all are unplugged the migration
continues. If one device won't unplug migration will stay in wait_unplug
state.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191029114905.6856-9-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bdrv_dirty_bitmap_next is always used in same pattern. So, split it
into _next and _first, instead of combining two functions into one and
add FOR_EACH_DIRTY_BITMAP macro.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
Add bs field to BdrvDirtyBitmap structure. Drop BlockDriverState
parameter from bitmap APIs where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-3-vsementsov@virtuozzo.com
[Rebased on top of block-copy. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Introduce support for GTree migration. A custom save/restore
is implemented. Each item is made of a key and a data.
If the key is a pointer to an object, 2 VMSDs are passed into
the GTree VMStateField.
When putting the items, the tree is traversed in sorted order by
g_tree_foreach.
On the get() path, gtrees must be allocated using the proper
key compare, key destroy and value destroy. This must be handled
beforehand, for example in a pre_load method.
Tests are added to test save/dump of structs containing gtrees
including the virtio-iommu domain/mappings scenario.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20191011121724.433-1-eric.auger@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
uintptr_t fixup for test on 32bit
When we found an available channel in multifd_send_pages(), its
pages->used is cleared and then attached to multifd_send_state.
It is not necessary to do this twice.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-5-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MultiFDPacket_t's magic and version field never changes during
migration, so move these two fields in setup stage.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-4-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
multifd_send_fill_packet() prepares meta data for following pages to
transfer. It would be more proper to fill pages->allocated instead of
static max value, especially we want to support flexible packet size.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-3-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191011085050.17622-2-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, we set PostcopyState blindly to RUNNING, even we found the
previous state is not LISTENING. This will lead to a corner case.
First let's look at the code flow:
qemu_loadvm_state_main()
ret = loadvm_process_command()
loadvm_postcopy_handle_run()
return -1;
if (ret < 0) {
if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING)
...
}
>From above snippet, the corner case is loadvm_postcopy_handle_run()
always sets state to RUNNING. And then it checks the previous state. If
the previous state is not LISTENING, it will return -1. But at this
moment, PostcopyState is already been set to RUNNING.
Then ret is checked in qemu_loadvm_state_main(), when it is -1
PostcopyState is checked. Current logic would pause postcopy and retry
if PostcopyState is RUNNING. This is not what we expect, because
postcopy is not active yet.
This patch makes sure state is set to RUNNING only previous state is
LISTENING by checking the state first.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested by: Peter Xu <peterx@redhat.com>
Message-Id: <20191010011316.31363-3-richardw.yang@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Function postcopy_ram_incoming_setup and postcopy_ram_incoming_cleanup
is a pair. Rename to make it clear for audience.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191010011316.31363-2-richardw.yang@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are two places to call function postcopy_ram_incoming_cleanup()
postcopy_ram_listen_thread on migration success
loadvm_postcopy_handle_listen one setup failure
On success, the vm will never accept another migration. On failure,
PostcopyState is transited from LISTENING to END and would be checked in
qemu_loadvm_state_main(). If PostcopyState is RUNNING, migration would
be paused and retried.
Currently PostcopyState is set to END in function
postcopy_ram_incoming_cleanup(). With above analysis, we can take this
step out and postpone this till the end of listen thread to indicate the
listen thread is done.
This is a preparation patch for later cleanup.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191006000249.29926-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up in merge to the 1 parameter postcopy_state_set
If mis->have_listen_thread is true, this means current PostcopyState
must be LISTENING or RUNNING. While the check at the beginning of the
function makes sure the state transaction happens when its previous
PostcopyState is ADVISE or DISCARD.
This means we would never touch this check.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191006000249.29926-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This provides helpful information on which entry failed.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005220517.24029-5-richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Not necessary to do the check again.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005220517.24029-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005220517.24029-3-richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
postcopy_ram_incoming_setup() and postcopy_ram_incoming_cleanup() are
counterpart. It is reasonable to map/unmap large zero page in these two
functions respectively.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005135021.21721-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During migration, a tmp page is allocated so that we could place a whole
host page during postcopy.
Currently the page is allocated during load stage, this is a little bit
late. And more important, if we failed to allocate it, the error is not
checked properly. Even it is NULL, we would still use it.
This patch moves the allocation to setup stage and if failed error
message would be printed and caller would notice it.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In normal precopy we can't do reconnection recovery - but we also
don't need to, since you can just rerun migration.
At the moment if the 'return-path' capability is on, we use
the return path in precopy to give a positive 'OK' to the end
of migration; however if migration fails then we fall into
the postcopy recovery path and hang. This fixes it by only
running the return path in the postcopy case.
Reported-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the automatic read unlocker in migration/rdma.c.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the automatic read unlocker in migration/ram.c
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-4-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the automatic rcu_read unlocker to fix a missing unlock.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Wrap the check into a function to make it easy to read.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190717005341.14140-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Various parts of the migration code do different things when they're
in postcopy mode; prior to this patch this has been 'postcopy-active'.
This patch extends 'in_postcopy' to include 'postcopy-paused' and
'postcopy-recover'.
In particular, when you set the max-postcopy-bandwidth parameter, this
only affects the current migration fd if we're 'in_postcopy';
this leads to a race in the postcopy recovery test where it increases
the speed from 4k/sec to unlimited, but that increase can get ignored
if the change is made between the point at which the reconnection
happens and it transitions back to active.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190923174942.12182-1-dgilbert@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This fixes a deadlock that can occur on the migration source after
a failed RDMA migration; as the source tries to cleanup it
clears a pair of pointers and uses synchronize_rcu to wait; this
is happening on the main thread. With the CPUs running
a CPU thread can be an rcu reader and attempt to grab the main lock
(kvm_handle_io->address_space_write->flatview_write->flatview_write_continue->
prepare_mmio_access->qemu_mutex_lock_iothread_impl)
Replace the synchronize_rcu with a call_rcu to postpone the freeing.
Fixes: 74637e6f08 ("migration: implement bi-directional RDMA QIOChannel")
( https://bugzilla.redhat.com/show_bug.cgi?id=1746787 )
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190913163507.1403-3-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If we've already finished the migration or something has
already gone wrong, don't moan about the migration stream disconnecting.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190913163507.1403-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is a cleanup for previous removal of unsentmap.
The sent parameter is not necessary now.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190819061843.28642-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit f3f491fcd6 ('Postcopy: Maintain unsentmap') introduced
unsentmap to track not yet sent pages.
This is not necessary since:
* unsentmap is a sub-set of bmap before postcopy start
* unsentmap is the summation of bmap and unsentmap after canonicalizing
This patch just removes it.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190819061843.28642-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All pages, either partially sent or partially dirty, will be discarded in
postcopy_send_discard_bm_ram(), since we update the unsentmap to be
unsentmap = unsentmap | dirty in ram_postcopy_send_discard_bitmap().
This is not necessary to do discard when canonicalizing bitmap. And by
doing so, we separate the page discard into two individual steps:
* canonicalize bitmap
* discard page
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190819061843.28642-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190912122514.22504-2-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Replace confusing usage:
~BDRV_SECTOR_MASK
With more clear:
(BDRV_SECTOR_SIZE - 1)
Remove BDRV_SECTOR_MASK and the unused BDRV_BLOCK_OFFSET_MASK which was
it's last user.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20190827185913.27427-3-nsoffer@redhat.com
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190912024957.11780-1-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In add_to_iovec(), qemu_fflush() will be called if iovec is full. If
this happens, buf_index is reset. Currently, this is not checked and
buf_index would always been adjust with buf size.
This is not harmful, but will waste some space in file buffer.
This patch make add_to_iovec() return 1 when it has flushed the file.
Then the caller could check the return value to see whether it is
necessary to adjust the buf_index any more.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190911132839.23336-3-richard.weiyang@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The check of writev_buffer is in qemu_fflush, which means it is not
harmful if it is NULL.
And removing it will make the code consistent since all other
add_to_iovec() is called without the check.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190911132839.23336-2-richard.weiyang@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We've got max-postcopy-bandwidth parameter but it's not applied
correctly after a postcopy recovery so the recovered migration stream
will still eat the whole net bandwidth. Fix that up.
Reported-by: Xiaohui Li <xiaohli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20190906130103.20961-1-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This capability realizes simple source validation by UUID.
It's useful for live migration between hosts.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190903162246.18524-2-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 11808bb removed the non-iovec based write support,
the comment hung on.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190823103946.7388-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During migration, there are several places to iterate on
savevm.handlers. And on each iteration, we need to check its ops and
related callbacks before invoke it.
Generally, ops is the first element to check, and it is only necessary
to check it once.
This patch clean all the related part in savevm.c to check ops only once
in those iterations.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190819032804.8579-1-richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When encounter error, multifd_send_thread should always notify who pay
attention to it before exit. Otherwise it may block migration_thread
at multifd_send_sync_main forever.
Error as follow:
-------------------------------------------------------------------------------
(gdb) bt
#0 0x00007f4d669dfa0b in do_futex_wait.constprop.1 () from /lib64/libpthread.so.0
#1 0x00007f4d669dfa9f in __new_sem_wait_slow.constprop.0 () from /lib64/libpthread.so.0
#2 0x00007f4d669dfb3b in sem_wait@@GLIBC_2.2.5 () from /lib64/libpthread.so.0
#3 0x0000562ccf0a5614 in qemu_sem_wait (sem=sem@entry=0x562cd1b698e8) at util/qemu-thread-posix.c:319
#4 0x0000562ccecb4752 in multifd_send_sync_main (rs=<optimized out>) at /qemu/migration/ram.c:1099
#5 0x0000562ccecb95f4 in ram_save_iterate (f=0x562cd0ecc000, opaque=<optimized out>) at /qemu/migration/ram.c:3550
#6 0x0000562ccef43c23 in qemu_savevm_state_iterate (f=0x562cd0ecc000, postcopy=false) at migration/savevm.c:1189
#7 0x0000562ccef3dcf3 in migration_iteration_run (s=0x562cd09fabf0) at migration/migration.c:3131
#8 migration_thread (opaque=opaque@entry=0x562cd09fabf0) at migration/migration.c:3258
#9 0x0000562ccf0a4c26 in qemu_thread_start (args=<optimized out>) at util/qemu-thread-posix.c:502
#10 0x00007f4d669d9e25 in start_thread () from /lib64/libpthread.so.0
#11 0x00007f4d6670635d in clone () from /lib64/libc.so.6
(gdb) f 4
#4 0x0000562ccecb4752 in multifd_send_sync_main (rs=<optimized out>) at /qemu/migration/ram.c:1099
1099 qemu_sem_wait(&p->sem_sync);
(gdb) list
1094 }
1095 for (i = 0; i < migrate_multifd_channels(); i++) {
1096 MultiFDSendParams *p = &multifd_send_state->params[i];
1097
1098 trace_multifd_send_sync_main_wait(p->id);
1099 qemu_sem_wait(&p->sem_sync);
1100 }
1101 trace_multifd_send_sync_main(multifd_send_state->packet_num);
1102 }
1103
(gdb) p i
$1 = 0
(gdb) p multifd_send_state->params[0].pending_job
$2 = 2 //It means the job before MULTIFD_FLAG_SYNC has already fail
(gdb) p multifd_send_state->params[0].quit
$3 = true
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Message-Id: <1567044996-2362-1-git-send-email-ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is a race between TCG and accesses to the dirty log:
vCPU thread reader thread
----------------------- -----------------------
TLB check -> slow path
notdirty_mem_write
write to RAM
set dirty flag
clear dirty flag
TLB check -> fast path
read memory
write to RAM
Fortunately, in order to fix it, no change is required to the
vCPU thread. However, the reader thread must delay the read after
the vCPU thread has finished the write. This can be approximated
conservatively by run_on_cpu, which waits for the end of the current
translation block.
A similar technique is used by KVM, which has to do a synchronous TLB
flush after doing a test-and-clear of the dirty-page flags.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eSUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging
Header cleanup patches for 2019-08-13
# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()". This is a bad idea:
hw/qdev-core.h is widely included.
Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.
Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800. A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Drop unnecessary inclusions from headers. Downgrade a few more to
exec/hwaddr.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
migration/qemu-file.h neglects to include it even though it needs
ram_addr_t. Fix that. Drop a few superfluous inclusions elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-14-armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-6-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This makes easy to debug things because when you want for all threads
to arrive at that semaphore, you know which one your are waiting for.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-3-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190814020218.1868-2-quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move migration helpers for strings under include/, so they can be used
outside of migration/
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190808150325.21939-2-marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For migration incoming side, it either quit in precopy or postcopy. It
is safe to use the mis->bh for both instead of allocating a dedicated
QEMUBH for postcopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190805053146.32326-1-richardw.yang@linux.intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Rename for better understanding of the code.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190808033155.30162-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Multifd sync will send MULTIFD_FLAG_SYNC flag info to destination, add
these bytes to ram_counters record.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Suggested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1564464816-21804-4-git-send-email-ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Limit the speed of multifd migration through common speed limitation
qemu file.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Message-Id: <1564464816-21804-3-git-send-email-ivanren@tencent.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add qemu_file_update_transfer for just update bytes_xfer for speed
limitation. This will be used for further migration feature such as
multifd migration.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1564464816-21804-2-git-send-email-ivanren@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch fix a multifd migration bug in migration speed calculation, this
problem can be reproduced as follows:
1. start a vm and give a heavy memory write stress to prevent the vm be
successfully migrated to destination
2. begin a migration with multifd
3. migrate for a long time [actually, this can be measured by transferred bytes]
4. migrate cancel
5. begin a new migration with multifd, the migration will directly run into
migration_completion phase
Reason as follows:
Migration update bandwidth and s->threshold_size in function
migration_update_counters after BUFFER_DELAY time:
current_bytes = migration_total_bytes(s);
transferred = current_bytes - s->iteration_initial_bytes;
time_spent = current_time - s->iteration_start_time;
bandwidth = (double)transferred / time_spent;
s->threshold_size = bandwidth * s->parameters.downtime_limit;
In multifd migration, migration_total_bytes function return
qemu_ftell(s->to_dst_file) + ram_counters.multifd_bytes.
s->iteration_initial_bytes will be initialized to 0 at every new migration,
but ram_counters is a global variable, and history migration data will be
accumulated. So if the ram_counters.multifd_bytes is big enough, it may lead
pending_size >= s->threshold_size become false in migration_iteration_run
after the first migration_update_counters.
Signed-off-by: Ivan Ren <ivanren@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <1564741121-1840-1-git-send-email-ivanren@tencent.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
MigrationState->bytes_xfer is only set to 0 in migrate_init().
Remove this unnecessary field.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190402003106.17614-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use QEMU_IS_ALIGNED for the check, it would be more consistent with
other align calculations.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190806004648.8659-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The purpose of the calculation is to find a HostPage which is partially
dirty.
* fixup_start_addr points to the start of the HostPage to discard
* run_start points to the next HostPage to check
While in the middle stage, there would two cases for run_start:
* aligned with HostPage means this is not partially dirty
* not aligned means this is partially dirty
When it is aligned, no work and calculation is necessary. run_start
already points to the start of next HostPage and is ready to continue.
When it is not aligned, the calculation could be simplified with:
* fixup_start_addr = QEMU_ALIGN_DOWN(run_start, host_ratio)
* run_start = QEMU_ALIGN_UP(run_start, host_ratio)
By doing so, run_start always points to the next HostPage to check.
fixup_start_addr always points to the HostPage to discard.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190806004648.8659-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In postcopy-ram.c, we provide three functions to discard certain
RAMBlock range:
* postcopy_discard_send_init()
* postcopy_discard_send_range()
* postcopy_discard_send_finish()
Currently, we allocate/deallocate PostcopyDiscardState for each RAMBlock
on sending discard information to destination. This is not necessary and
the same data area could be reused for each RAMBlock.
This patch defines PostcopyDiscardState a static variable. By doing so:
1) avoid memory allocation and deallocation to the system
2) avoid potential failure of memory allocation
3) hide some details for their users
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190724010721.2146-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
After cleanup, it would be clear to audience there are two cases
ram_load:
* precopy
* postcopy
And it is not necessary to check postcopy_running on each iteration for
precopy.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190725002023.2335-3-richardw.yang@linux.intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It is not reasonable to continue when version_id mismatch.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190722075339.25121-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
LOADVM_QUIT allows a command to quit all layers of nested loadvm loops,
while current return value check is not that proper even it works now.
Current return value check "ret & LOADVM_QUIT" would return true if
bit[0] is 1. This would be true when ret is -1 which is used to indicate
an error of handling a command.
Since there is only one place return LOADVM_QUIT and no other
combination of return value, use "ret == LOADVM_QUIT" would be more
proper.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718064257.29218-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
RAMBlock->used_length is always passed to migration_bitmap_sync_range(),
which could be retrieved from RAMBlock.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718012547.16373-1-richardw.yang@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use common helper function to check the state.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190719071129.11880-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is only one place to set start_postcopy to true,
qmp_migrate_start_postcopy(), which make sure start_postcopy could be
set to true when migrate_postcopy() return true.
So start_postcopy is true implies the other one.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190718083747.5859-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
PostcopyState is already set to ADVISE at the beginning of
loadvm_postcopy_handle_advise().
Remove the redundant set.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190711080816.6405-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
in_postcopy and iterable_only are not SaveStateEntry specific, it would
be more proper to check them out of iteration.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is a preparation patch for further cleanup.
No functional change, just wrap two major part of
qemu_savevm_state_complete_precopy() into function.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It would be proper to flush file even for iterable_only case.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190709140924.13291-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This means it is not necessary to spare an extra variable to hold this
condition. Use host_offset directly is fine.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190710050814.31344-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Use the same way for run_end to calculate run_start, which saves one
operation.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190710050814.31344-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since we break the loop when there is no more page to discard, we are
sure the following process would find some page to discard.
It is not necessary to check it again.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-4-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When one is equal or bigger then end, it means there is no page to
discard. Just break the loop in this case instead of processing it.
No functional change, just refactor it a little.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If one equals end, it means we have gone through the whole bitmap.
Use a more restrict check to skip a unnecessary condition.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190627020822.15485-2-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
