Commit Graph

69 Commits

Author SHA1 Message Date
Mark Cave-Ayland
bd4214fc92 macio: move unaligned DMA write code into separate pmac_dma_write() function
Similarly switch the macio IDE routines over to use the new function and
tidy-up the remaining code as required.

[Maintainer edit: printf format codes adjusted for 32/64bit. --js]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1425939893-14404-3-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
2015-05-22 15:58:22 -04:00
Mark Cave-Ayland
4827ac1e8f macio: move unaligned DMA read code into separate pmac_dma_read() function
This considerably helps simplify the complexity of the macio read routines and
by switching macio CDROM accesses to use the new code, fixes the issue with
the CDROM device being detected intermittently by Darwin/OS X.

[Maintainer edit: printf format codes adjusted for 32/64bit. --js]

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ailande.co.uk>
Acked-by: John Snow <jsnow@redhat.com>
Message-id: 1425939893-14404-2-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: John Snow <jsnow@redhat.com>
2015-05-22 15:58:22 -04:00
Paolo Bonzini
a96cb23629 ide: replace set_unit callback with more IDEBus state
Start moving the initial state of the current request to IDEBus, so that
AHCI can use it.  The set_unit callback is not used anymore once this is
done.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10 14:02:22 +01:00
Paolo Bonzini
fe09c7c9f0 ide: remove restart_cb callback
With restarts now handled by ide_restart_cb and
the IDEDMAOps.restart_dma() member, remove the old
restart_cb callback.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1424708286-16483-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-03-10 14:02:22 +01:00
John Snow
3251bdcf1c ide: Correct handling of malformed/short PRDTs
This impacts both BMDMA and AHCI HBA interfaces for IDE.
Currently, we confuse the difference between a PRDT having
"0 bytes" and a PRDT having "0 complete sectors."

When we receive an incomplete sector, inconsistent error checking
leads to an infinite loop wherein the call succeeds, but it
didn't give us enough bytes -- leading us to re-call the
DMA chain over and over again. This leads to, in the BMDMA case,
leaked memory for short PRDTs, and infinite loops and resource
usage in the AHCI case.

The .prepare_buf() callback is reworked to return the number of
bytes that it successfully prepared. 0 is a valid, non-error
answer that means the table was empty and described no bytes.
-1 indicates an error.

Our current implementation uses the io_buffer in IDEState to
ultimately describe the size of a prepared scatter-gather list.
Even though the AHCI PRDT/SGList can be as large as 256GiB, the
AHCI command header limits transactions to just 4GiB. ATA8-ACS3,
however, defines the largest transaction to be an LBA48 command
that transfers 65,536 sectors. With a 512 byte sector size, this
is just 32MiB.

Since our current state structures use the int type to describe
the size of the buffer, and this state is migrated as int32, we
are limited to describing 2GiB buffer sizes unless we change the
migration protocol.

For this reason, this patch begins to unify the assertions in the
IDE pathways that the scatter-gather list provided by either the
AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum,
2GiB. This should be resilient enough unless we need a sector
size that exceeds 32KiB.

Further, the likelihood of any guest operating system actually
attempting to transfer this much data in a single operation is
very slim.

To this end, the IDEState variables have been updated to more
explicitly clarify our maximum supported size. Callers to the
prepare_buf callback have been reworked to understand the new
return code, and all versions of the prepare_buf callback have
been adjusted accordingly.

Lastly, the ahci_populate_sglist helper, relied upon by the
AHCI implementation of .prepare_buf() as well as the PCI
implementation of the callback have had overflow assertions
added to help make clear the reasonings behind the various
type changes.

[Added %d -> %"PRId64" fix John sent because off_pos changed from int to
int64_t.
--Stefan]

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-11-14 09:20:35 +00:00
Markus Armbruster
4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Markus Armbruster
097310b53e block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
I'll use it with block backends shortly, and the name is going to fit
badly there.  It's a block layer thing anyway, not just a block driver
thing.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Benoît Canet
5366d0c8bc block: Make the block accounting functions operate on BlockAcctStats
This is the next step for decoupling block accounting functions from
BlockDriverState.
In a future commit the BlockAcctStats structure will be moved from
BlockDriverState to the device models structures.

Note that bdrv_get_stats was introduced so device models can retrieve the
BlockAcctStats structure of a BlockDriverState without being aware of it's
layout.
This function should go away when BlockAcctStats will be embedded in the device
models structures.

CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Keith Busch <keith.busch@intel.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Michael Tokarev <mjt@tls.msk.ru>
CC: John Snow <jsnow@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: Alexander Graf <agraf@suse.de>
CC: Max Reitz <mreitz@redhat.com>

Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-10 10:41:29 +02:00
Benoît Canet
28298fd3d9 block: rename BlockAcctType members to start with BLOCK_ instead of BDRV_
The middle term goal is to move the BlockAcctStats structure in the device models.
(Capturing I/O accounting statistics in the device models is good for billing)
This patch make a small step in this direction by removing a reference to BDRV.

CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Keith Busch <keith.busch@intel.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Markus Armbruster <armbru@redhat.com>
CC: Alexander Graf <agraf@suse.de>i

Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-10 10:41:29 +02:00
Paolo Bonzini
0e7ce54cf5 ide: fold add_status callback into set_inactive
It is now called only after the set_inactive callback.  Put the two together.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
446351236b ide: simplify start_transfer callbacks
Drop the unused return value and make the callback optional.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
829b933b70 ide: simplify set_inactive callbacks
Drop the unused return value and make the callback optional.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Paolo Bonzini
1374bec063 ide: simplify reset callbacks
Drop the unused return value and make the callback optional.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-15 18:03:12 +01:00
Alexander Graf
3e300fa6ad macio ide: Do remainder access asynchronously
The macio IDE controller has some pretty nasty magic in its implementation to
allow for unaligned sector accesses. We used to handle these accesses
synchronously inside the IO callback handler.

However, the block infrastructure changed below our feet and now it's impossible
to call a synchronous block read/write from the aio callback handler of a
previous block access.

Work around that limitation by making the unaligned handling bits also go
through our asynchronous handler.

This fixes booting Mac OS X for me.

Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:38 +02:00
Mark Cave-Ayland
85720d3667 macio: handle non-block ATAPI DMA transfers
Currently the macio DMA routines assume that all DMA requests are for read/write
block transfers. This is not always the case for ATAPI, for example when
requesting a TOC where the response is generated directly in the IDE buffer.

Detect these non-block ATAPI DMA transfers (where no lba is specified in the
command) and copy the results directly into RAM as indicated by the DBDMA
descriptor. This fixes CDROM access under MorphOS.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16 13:24:36 +02:00
Juan Quintela
35d08458a9 savevm: Remove all the unneeded version_minimum_id_old (rest)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-05-14 15:24:51 +02:00
Andreas Färber
c6baf942e0 ide: Pass size to ide_bus_new()
To be passed to qbus_create_inplace().

Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30 20:14:39 +02:00
Stefan Weil
04dd125942 PPC: dbdma: macio: Fix format specifiers (build regression)
Fix a number of warnings for 32 bit builds (tested on MingW and Linux):

  CC    hw/ide/macio.o
qemu/hw/ide/macio.c: In function 'pmac_ide_atapi_transfer_cb':
qemu/hw/ide/macio.c:134:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
qemu/hw/ide/macio.c: In function 'pmac_ide_transfer_cb':
qemu/hw/ide/macio.c:215:5: error: format '%ld' expects argument of type 'long int', but argument 5 has type 'int64_t' [-Werror=format]
qemu/hw/ide/macio.c:222:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
qemu/hw/ide/macio.c:264:9: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'hwaddr' [-Werror=format]
cc1: all warnings being treated as errors
make: *** [hw/ide/macio.o] Error 1

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-27 11:22:54 +04:00
Alexander Graf
f35ea98cd9 PPC: dbdma: Support more multi-issue DMA requests
A DMA request can happen for data that hasn't been completely been
provided by the IDE core yet. For example

  - DBDMA request for 0x1000 bytes
  - IDE request for 1 sector
  - DBDMA wants to read 0x1000 bytes (8 sectors) from bdrv
  - breakage

Instead, we should truncate our bdrv request to the maximum number
of sectors we're allowed to read at that given time. Once that transfer
is through, we will fall into our recently introduced waiting logic.

  - DBDMA requests for 0x1000 bytes
  - IDE request for 1 sector
  - DBDMA wants to read MIN(0x1000, 1 * 512) bytes
  - DBDMA finishes reading, indicates to IDE core that transfer is complete
  - IDE request for 7 sectors
  - DBDMA finishes the DMA

Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:25 +02:00
Alexander Graf
80fc95d8bd PPC: dbdma: Support unaligned DMA access
The DBDMA engine really just reads bytes from a producing device (IDE
in our case) and shoves these bytes into memory. It doesn't care whether
any alignment takes place or not.

Our code today however assumes that block accesses always happen on
sector (512 byte) boundaries. This is a fair assumption for most cases.

However, Mac OS X really likes to do unaligned, incomplete accesses
that it finishes with the next DMA request.

So we need to read / write the unaligned bits independent of the actual
asynchronous request, because that one can only handle 512-byte-aligned
data. We also need to cache these unaligned sectors until the next DMA
request, at which point the data might be successfully flushed from the
pipe.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:25 +02:00
Alexander Graf
cae323572e PPC: dbdma: Wait for DMA until we have data
We should only start processing DMA requests when we have data to process.
Hold off working through the DMA shuffling until the IDE core told us that
it's ready.

This is required because the guest can program the DMA engine or the IDE
transfer first. Both are legal.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:25 +02:00
Alexander Graf
4aa3510f6f PPC: dbdma: macio: Add DMA callback
We need to know when the IDE core starts a DMA transfer. Add a notifier
function so we have the chance to start transmitting data.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:25 +02:00
Alexander Graf
33ce36bb33 PPC: Mac: Add debug prints in macio and dbdma code
The macio code is basically undebuggable as it stands today, with no
debug prints anywhere whatsoever. DBDMA was better, but I needed a
few more to create reasonable logs that tell me where breakage is.

Add a DPRINTF macro in the macio source file and add a bunch of debug
prints that are all disabled by default of course.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:24 +02:00
Alexander Graf
8aef291fb8 PPC: Macio: Replace tabs with spaces
s/^I/        /g on the file.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:24 +02:00
Alexander Graf
14eefd0ec3 PPC: g3beige: Move secondary IDE bus to mac-io
On a real G3 Beige the secondary IDE bus lives on the mac-io chip, not
on some random PCI device. Move it there to become more compatible.

While at it, also clean up the IDE channel connection logic.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-11 18:51:24 +02:00
Paolo Bonzini
1437c94b26 hw/i*: pass owner to memory_region_init* functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:48 +02:00
Paolo Bonzini
2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Paolo Bonzini
f487b677c2 dma: keep a device alive while it has SGLists
Reviewed-by: Anthony Liguori <aliguori@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:30 +02:00
Paolo Bonzini
df32fd1c9f dma: eliminate DMAContext
The DMAContext is a simple pointer to an AddressSpace that is now always
already available.  Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20 16:39:52 +02:00
Aurelien Jarno
b9b5df6f0c ide/macio: fix wrong opaque with TRIM support
Commit 215e47b9 enabled TRIM by default, which revealed a bug in TRIM
support for the IDE macio emulation driver, introduced in d353fb72.

The call to dma_bdrv_io() is using a wrong opaque of type IDEState
instead of DBDMA_io. This patch fixes that.

Fixes LP#1179104

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-20 01:54:14 +02:00
Kevin Wolf
0ee20e6658 ahci: Don't allow creating slave drives
An IDE bus provided by AHCI can only take a single IDE drive. If you add
a drive as slave, qemu used to accept the command line but the device
wouldn't be actually usable. Catch the situation instead and error out.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-05-08 15:28:49 +02:00
Paolo Bonzini
0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
Andreas Färber
07a7484e5d ide/macio: QOM'ify MacIO IDE
It was not qdev'ified before. Turn it into a SysBusDevice.
Embed them into the MacIO devices.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-25 22:02:54 +01:00
Andreas Färber
baec19105b ppc: Move Mac machines to hw/ppc/
Signed-off-by: Andreas Färber <afaerber@suse.de>
[agraf: squash in MAINTAINERS fix]
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-25 22:02:53 +01:00
Paolo Bonzini
9c17d615a6 softmmu: move include files to include/sysemu/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:32:45 +01:00
Paolo Bonzini
737e150e89 block: move include files to include/block/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19 08:31:31 +01:00
Peter Maydell
d688e5239a hw/ide/macio: Fix segfault caused by NULL DMAContext*
Pass qemu_sglist_init the global dma_context_memory rather than a NULL
pointer; this fixes a segfault in dma_memory_map() when the guest
starts using DMA.

Reported-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-11-26 19:53:26 +01:00
Avi Kivity
a8170e5e97 Rename target_phys_addr_t to hwaddr
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific).  Replace it with a finger-friendly,
standards conformant hwaddr.

Outstanding patchsets can be fixed up with the command

  git rebase -i --exec 'find -name "*.[ch]"
                        | xargs s/target_phys_addr_t/hwaddr/g' origin

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-23 08:58:25 -05:00
Amos Kong
4d5b97da35 cleanup useless return sentence
This patch cleans up return sentences in the end of void functions.

Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-10-05 15:10:21 +02:00
David Gibson
c65bcef306 iommu: Make sglists and dma_bdrv helpers use new universal DMA helpers
dma-helpers.c contains a number of helper functions for doing
scatter/gather DMA, and various block device related DMA.  Currently,
these directly access guest memory using cpu_physical_memory_*(),
assuming no IOMMU translation.

This patch updates this code to use the new universal DMA helper
functions.  qemu_sglist_init() now takes a DMAContext * to describe
the DMA address space in which the scatter/gather will take place.

We minimally update the callers qemu_sglist_init() to pass NULL
(i.e. no translation, same as current behaviour).  Some of those
callers should pass something else in some cases to allow proper IOMMU
translation in future, but that will be fixed in later patches.

Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-27 16:33:25 -05:00
David Gibson
43cf8ae69b Use DMADirection type for dma_bdrv_io
Currently dma_bdrv_io() takes a 'to_dev' boolean parameter to
determine the direction of DMA it is emulating.  We already have a
DMADirection enum designed specifically to encode DMA directions.
This patch uses it for dma_bdrv_io() as well.  This involves removing
the DMADirection definition from the #ifdef it was inside, but since that
only existed to protect the definition of dma_addr_t from places where
config.h is not included, there wasn't any reason for it to be there in
the first place.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05 14:54:40 +02:00
Stefan Weil
a348f10884 Add missing const attributes for MemoryRegionOps
Most MemoryRegionOps already had the const attribute.
This patch adds it to the remaining ones.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-11 11:40:15 +00:00
Paolo Bonzini
b9b2008bbf block: dma_bdrv_* does not return NULL
Initially attempted with the following semantic patch:

@ rule1 @
expression E;
statement S;
@@
  E =
(
   dma_bdrv_io
|  dma_bdrv_read
|  dma_bdrv_write
)
     (...);
(
- if (E == NULL) { ... }
|
- if (E)
    { <... S ...> }
)

which however did not match anything.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-15 12:40:08 +01:00
Paolo Bonzini
ad54ae80c7 block: bdrv_aio_* do not return NULL
Initially done with the following semantic patch:

@ rule1 @
expression E;
statement S;
@@
  E =
(
   bdrv_aio_readv
|  bdrv_aio_writev
|  bdrv_aio_flush
|  bdrv_aio_discard
|  bdrv_aio_ioctl
)
     (...);
(
- if (E == NULL) { ... }
|
- if (E)
    { <... S ...> }
)

which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-15 12:40:07 +01:00
Stefan Hajnoczi
922453bca6 block: convert qemu_aio_flush() calls to bdrv_drain_all()
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O.  Most of these places actually want to drain all block
requests but there is no block layer API to do so.

This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete.  As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:56:06 +01:00
Paolo Bonzini
67cc61e430 atapi/scsi: unify definitions for MMC
The definitions in ide/internal.h are duplicates, since ATAPI commands
actually come from SCSI.  Use the ones in scsi-defs.h and move the
missing ones there.  Two exceptions:

- MODE_PAGE_WRITE_PARMS conflicts with the "flexible disk geometry"
page in scsi-disk.c.  It is unused, so pick the latter.

- GPCMD_* is left in ide/internal.h, at least for now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-28 19:25:50 +02:00
Paolo Bonzini
bbca72c621 dma-helpers: rename is_write to to_dev
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19 11:35:33 +02:00
Markus Armbruster
fb0c61a5a5 hw: Trim superfluous #include "block_int.h"
Including it in device models is unclean, including it without a
reason adds insult to injury.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12 15:17:21 +02:00
Christoph Hellwig
a597e79ce1 block: explicit I/O accounting
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and
make the hardware models call directly into the accounting helpers.

This means:
 - we do not count internal requests from image formats in addition
   to guest originating I/O
 - we do not double count I/O ops if the device model handles it
   chunk wise
 - we only account I/O once it actuall is done
 - can extent I/O accounting to synchronous or coroutine I/O easily
 - implement I/O latency tracking easily (see the next patch)

I've conveted the existing device model callers to the new model,
device models that are using synchronous I/O and weren't accounted
before haven't been updated yet.  Also scsi hasn't been converted
to the end-to-end accounting as I want to defer that after the pending
scsi layer overhaul.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-25 18:18:42 +02:00
Anthony Liguori
7267c0947d Use glib memory allocation and free functions
qemu_malloc/qemu_free no longer exist after this commit.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20 23:01:08 -05:00