Rather than duplicating the same loop in multiple locations,
create a static function to do the work.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added amount of bytes transferred to the VM at destination by all VFIO
devices
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If the device is not a failover primary device, call
vfio_migration_probe() and vfio_migration_finalize() to enable
migration support for those devices that support it respectively to
tear it down again.
Removed migration blocker from VFIO PCI device specific structure and use
migration blocker from generic structure of VFIO device.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With vIOMMU, IO virtual address range can get unmapped while in pre-copy
phase of migration. In that case, unmap ioctl should return pages pinned
in that range and QEMU should find its correcponding guest physical
addresses and report those dirty.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
[aw: fix error_report types, fix cpu_physical_memory_set_dirty_lebitmap() cast]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When vIOMMU is enabled, register MAP notifier from log_sync when all
devices in container are in stop and copy phase of migration. Call replay
and get dirty pages from notifier callback.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_listener_log_sync gets list of dirty pages from container using
VFIO_IOMMU_GET_DIRTY_BITMAP ioctl and mark those pages dirty when all
devices are stopped and saving state.
Return early for the RAM block section of mapped MMIO region.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
[aw: fix error_report types, fix cpu_physical_memory_set_dirty_lebitmap() cast]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Call VFIO_IOMMU_DIRTY_PAGES ioctl to start and stop dirty pages tracking
for VFIO devices.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added helper functions to get IOMMU info capability chain.
Added function to get migration capability information from that
capability chain for IOMMU container.
Similar change was proposed earlier:
https://lists.gnu.org/archive/html/qemu-devel/2018-05/msg03759.html
Disable migration for devices if IOMMU module doesn't support migration
capability.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Sequence during _RESUMING device state:
While data for this device is available, repeat below steps:
a. read data_offset from where user application should write data.
b. write data of data_size to migration region from data_offset.
c. write data_size which indicates vendor driver that data is written in
staging buffer.
For user, data is opaque. User should write data in the same order as
received.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added .save_live_pending, .save_live_iterate and .save_live_complete_precopy
functions. These functions handles pre-copy and stop-and-copy phase.
In _SAVING|_RUNNING device state or pre-copy phase:
- read pending_bytes. If pending_bytes > 0, go through below steps.
- read data_offset - indicates kernel driver to write data to staging
buffer.
- read data_size - amount of data in bytes written by vendor driver in
migration region.
- read data_size bytes of data from data_offset in the migration region.
- Write data packet to file stream as below:
{VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data,
VFIO_MIG_FLAG_END_OF_STATE }
In _SAVING device state or stop-and-copy phase
a. read config space of device and save to migration file stream. This
doesn't need to be from vendor driver. Any other special config state
from driver can be saved as data in following iteration.
b. read pending_bytes. If pending_bytes > 0, go through below steps.
c. read data_offset - indicates kernel driver to write data to staging
buffer.
d. read data_size - amount of data in bytes written by vendor driver in
migration region.
e. read data_size bytes of data from data_offset in the migration region.
f. Write data packet as below:
{VFIO_MIG_FLAG_DEV_DATA_STATE, data_size, actual data}
g. iterate through steps b to f while (pending_bytes > 0)
h. Write {VFIO_MIG_FLAG_END_OF_STATE}
When data region is mapped, its user's responsibility to read data from
data_offset of data_size before moving to next steps.
Added fix suggested by Artem Polyakov to reset pending_bytes in
vfio_save_iterate().
Added fix suggested by Zhi Wang to add 0 as data size in migration stream and
add END_OF_STATE delimiter to indicate phase complete.
Suggested-by: Artem Polyakov <artemp@nvidia.com>
Suggested-by: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Define flags to be used as delimiter in migration stream for VFIO devices.
Added .save_setup and .save_cleanup functions. Map & unmap migration
region from these functions at source during saving or pre-copy phase.
Set VFIO device state depending on VM's state. During live migration, VM is
running when .save_setup is called, _SAVING | _RUNNING state is set for VFIO
device. During save-restore, VM is paused, _SAVING state is set for VFIO device.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added migration state change notifier to get notification on migration state
change. These states are translated to VFIO device state and conveyed to
vendor driver.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VM state change handler is called on change in VM's state. Based on
VM state, VFIO device state should be changed.
Added read/write helper functions for migration region.
Added function to set device_state.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[aw: lx -> HWADDR_PRIx, remove redundant parens]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Whether the VFIO device supports migration or not is decided based of
migration region query. If migration region query is successful and migration
region initialization is successful then migration is supported else
migration is blocked.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Added functions to save and restore PCI device specific data,
specifically config space of PCI device.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This function will be used for migration region.
Migration region is mmaped when migration starts and will be unmapped when
migration is complete.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Neo Jia <cjia@nvidia.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_get_dev_region_info() unconditionally allocates memory
for a passed-in vfio_region_info structure (and does not re-use
an already allocated structure). Therefore, we have to free
the structure we pass to that function in vfio_ccw_get_region()
for every region we successfully obtained information for.
Fixes: 8fadea24de ("vfio-ccw: support async command subregion")
Fixes: 46ea3841ed ("vfio-ccw: Add support for the schib region")
Fixes: f030532f2a ("vfio-ccw: Add support for the CRW region and IRQ")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200928101701.13540-1-cohuck@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Make the type checking macro name consistent with the TYPE_*
constant.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200902224311.1321159-56-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will make the type name constant consistent with the name of
the type checking macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200902224311.1321159-9-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will make the type name constant consistent with the name of
the type checking macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200902224311.1321159-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This will make future conversion to OBJECT_DECLARE* easier.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-By: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200825192110.3528606-43-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calling ramfb_display_update() might replace the DisplaySurface with the
boot display, which in turn will free the currently active
DisplaySurface.
So clear our DisplaySurface pinter (dpy->region.surface pointer) to (a)
avoid use-after-free and (b) force replacing the boot display with the
real display when switching back.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 20200713124520.23266-1-kraxel@redhat.com
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous commit did that with a Coccinelle script I
consider fairly trustworthy. This commit uses the same script with
the matching of return taken out, i.e. we convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
}
to
if (!foo(..., errp)) {
...
...
}
This is unsound: @err could still be read between afterwards. I don't
know how to express "no read of @err without an intervening write" in
Coccinelle. Instead, I manually double-checked for uses of @err.
Suboptimal line breaks tweaked manually. qdev_realize() simplified
further to placate scripts/checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-36-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
VFIO is (except devices without a physical IOMMU or some mediated devices)
incompatible with discarding of RAM. The kernel will pin basically all VM
memory. Let's convert to ram_block_discard_disable(), which can now
fail, in contrast to qemu_balloon_inhibit().
Leave "x-balloon-allowed" named as it is for now.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The crw region can be used to obtain information about
Channel Report Words (CRW) from vfio-ccw driver.
Currently only channel-path related CRWs are passed to
QEMU from vfio-ccw driver.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-7-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Make it easier to add new ones in the future.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-5-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The schib region can be used to obtain the latest SCHIB from the host
passthrough subchannel. Since the guest SCHIB is virtualized,
we currently only update the path related information so that the
guest is aware of any path related changes when it issues the
'stsch' instruction.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
While we're at it, add a g_free() for the async_cmd_region that
is the last thing currently created. g_free() knows how to handle
NULL pointers, so this makes it easier to remember what cleanups
need to be performed when new regions are added.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-3-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The #ifdef CONFIG_VFIO_IGD in pci-quirks.c is not working since the
required header config-devices.h is not included, so that the legacy
IGD passthrough is currently broken. Let's include the right header
to fix this issue.
Buglink: https://bugs.launchpad.net/qemu/+bug/1882784
Fixes: 29d62771c8 ("hw/vfio: Move the IGD quirk code to a separate file")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The VMD endpoint provides a real PCIe domain to the guest, including
bridges and endpoints. Because the VMD domain is enumerated by the guest
kernel, the guest kernel will assign Guest Physical Addresses to the
downstream endpoint BARs and bridge windows.
When the guest kernel performs MMIO to VMD sub-devices, MMU will
translate from the guest address space to the physical address space.
Because the bridges have been programmed with guest addresses, the
bridges will reject the transaction containing physical addresses.
VMD device 28C0 natively assists passthrough by providing the Host
Physical Address in shadow registers accessible to the guest for bridge
window assignment. The shadow registers are valid if bit 1 is set in VMD
VMLOCK config register 0x70.
In order to support existing VMDs, this quirk provides the shadow
registers in a vendor-specific PCI capability to the vfio-passthrough
device for all VMD device ids which don't natively assist with
passthrough. The Linux VMD driver is updated to check for this new
vendor-specific capability.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO is currently the only one left that is not using the generic
function (kvm_irqchip_add_irqfd_notifier_gsi()) to register irqfds.
Let VFIO use the common framework too.
Follow up patches will introduce extra features for kvm irqfd, so that
VFIO can easily leverage that after the switch.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200318145204.74483-3-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the explicit prefetch check when using vfio-ccw devices.
This check does not trigger in practice as all Linux channel programs
are intended to use prefetch.
Newer Linux kernel versions do not require to force the PFCH flag with
vfio-ccw devices anymore.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200512181535.18630-2-jrossi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If SELinux is setup without 'execmem' permission for qemu, all mmap
with (PROT_WRITE | PROT_EXEC) will fail and print a warning in
SELinux log.
If "nvlink2-mr" memory allocation fails (fist diff), it will cause
guest NUMA nodes to not be correctly configured (V100 memory will
not be visible for guest, nor its NUMA nodes).
Not having 'execmem' permission is intesting for virtual machines to
avoid buffer-overflow based attacks, and it's adopted in distros
like RHEL.
So, removing the PROT_EXEC flag seems the right thing to do.
Browsing some other code that mmaps memory for usage with
memory_region_init_ram_device_ptr, I could notice it's usual to
not have PROT_EXEC (only PROT_READ | PROT_WRITE), so it should be
no problem around this.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Message-Id: <20200501055448.286518-1-leobras.c@gmail.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit f79081b4b7.
Patch has broken byteorder handling: RAMFBCfg fields are in bigendian
byteorder, the reset function doesn't care so native byteorder is used
instead. Given this went unnoticed so far the feature is obviously
unused, so just revert the patch.
Cc: Hou Qiming <hqm03ster@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-2-kraxel@redhat.com
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Coverity detected an issue (CID 1421903) with potential call of clz64(0)
which returns 64 which make it do "<<" with a negative number.
This checks the mask and avoids undefined behaviour.
In practice pgsizes and memory_region_iommu_get_min_page_size() always
have some common page sizes and even if they did not, the resulting page
size would be 0x8000.0000.0000.0000 (gcc 9.2) and
ioctl(VFIO_IOMMU_SPAPR_TCE_CREATE) would fail anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20200324063912.25063-1-aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: 8b818e059b
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-9-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In a few places we report errno formatted as a negative integer.
This is not as user friendly as it can be. Use strerror() and/or
error_setg_errno() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <4949c3ecf1a32189b8a4b5eb4b0fd04c1122501d.1581674006.git.mprivozn@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The IGD quirk code defines a separate device, the so-called
"vfio-pci-igd-lpc-bridge" which shows up as a user-creatable
device in all QEMU binaries that include the vfio code. This
is a little bit unfortunate for two reasons: First, this device
is completely useless in binaries like qemu-system-s390x.
Second we also would like to disable it in downstream RHEL
which currently requires some extra patches there since the
device does not have a proper Kconfig-style switch yet.
So it would be good if the device could be disabled more easily,
thus let's move the code to a separate file instead and introduce
a proper Kconfig switch for it which gets only enabled by default
if we also have CONFIG_PC_PCI enabled.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The kvm irqchip notifier is only registered if the device supports
INTx, however it's unconditionally removed. If the assigned device
does not support INTx, this will cause QEMU to crash when unplugging
the device from the system. Change it to conditionally remove the
notifier only if the notify hook is setup.
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Alex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org # v4.2
Reported-by: yanghliu@redhat.com
Debugged-by: Eduardo Habkost <ehabkost@redhat.com>
Fixes: c5478fea27 ("vfio/pci: Respond to KVM irqchip change notifier")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1782678
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
No reason for local_err here, use errp directly instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20191205174635.18758-21-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
VFIO PCI devices already respond to the pci intx routing notifier, in order
to update kernel irqchip mappings when routing is updated. However this
won't handle the case where the irqchip itself is replaced by a different
model while retaining the same routing. This case can happen on
the pseries machine type due to PAPR feature negotiation.
To handle that case, add a handler for the irqchip change notifier, which
does much the same thing as the routing notifier, but is unconditional,
rather than being a no-op when the routing hasn't changed.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
This splits the vfio_intx_update() function into one part doing the actual
reconnection with the KVM irqchip (vfio_intx_update(), now taking an
argument with the new routing) and vfio_intx_routing_notifier() which
handles calls to the pci device intx routing notifier and calling
vfio_intx_update() when necessary. This will make adding support for the
irqchip change notifier easier.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
hw/vfio/display.c needs the EDID subsystem, select it.
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When an error occurs in migrate_add_blocker() it sets a
negative return value and uses error pointer we pass in.
Instead of just looking at the error pointer check for a negative return
value and avoid a coverity error because the return value is
set but never used. This fixes CID 1407219.
Reported-by: Coverity (CID 1407219)
Fixes: f045a0104c ("vfio: unplug failover primary device before migration")
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When user tries to hotplug a VFIO device, but the operation fails
somewhere in the middle (in my testing it failed because of
RLIMIT_MEMLOCK forbidding more memory allocation), then a double
free occurs. In vfio_realize() the vdev->migration_blocker is
allocated, then something goes wrong which causes control to jump
onto 'error' label where the error is freed. But the pointer is
left pointing to invalid memory. Later, when
vfio_instance_finalize() is called, the memory is freed again.
In my testing the second hunk was sufficient to fix the bug, but
I figured the first hunk doesn't hurt either.
==169952== Invalid read of size 8
==169952== at 0xA47DCD: error_free (error.c:266)
==169952== by 0x4E0A18: vfio_instance_finalize (pci.c:3040)
==169952== by 0x8DF74C: object_deinit (object.c:606)
==169952== by 0x8DF7BE: object_finalize (object.c:620)
==169952== by 0x8E0757: object_unref (object.c:1074)
==169952== by 0x45079C: memory_region_unref (memory.c:1779)
==169952== by 0x45376B: do_address_space_destroy (memory.c:2793)
==169952== by 0xA5C600: call_rcu_thread (rcu.c:283)
==169952== by 0xA427CB: qemu_thread_start (qemu-thread-posix.c:519)
==169952== by 0x80A8457: start_thread (in /lib64/libpthread-2.29.so)
==169952== by 0x81C96EE: clone (in /lib64/libc-2.29.so)
==169952== Address 0x143137e0 is 0 bytes inside a block of size 48 free'd
==169952== at 0x4A342BB: free (vg_replace_malloc.c:530)
==169952== by 0xA47E05: error_free (error.c:270)
==169952== by 0x4E0945: vfio_realize (pci.c:3025)
==169952== by 0x76A4FF: pci_qdev_realize (pci.c:2099)
==169952== by 0x689B9A: device_set_realized (qdev.c:876)
==169952== by 0x8E2C80: property_set_bool (object.c:2080)
==169952== by 0x8E0EF6: object_property_set (object.c:1272)
==169952== by 0x8E3FC8: object_property_set_qobject (qom-qobject.c:26)
==169952== by 0x8E11DB: object_property_set_bool (object.c:1338)
==169952== by 0x5E7BDD: qdev_device_add (qdev-monitor.c:673)
==169952== by 0x5E81E5: qmp_device_add (qdev-monitor.c:798)
==169952== by 0x9E18A8: do_qmp_dispatch (qmp-dispatch.c:132)
==169952== Block was alloc'd at
==169952== at 0x4A35476: calloc (vg_replace_malloc.c:752)
==169952== by 0x51B1158: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.6000.6)
==169952== by 0xA47357: error_setv (error.c:61)
==169952== by 0xA475D9: error_setg_internal (error.c:97)
==169952== by 0x4DF8C2: vfio_realize (pci.c:2737)
==169952== by 0x76A4FF: pci_qdev_realize (pci.c:2099)
==169952== by 0x689B9A: device_set_realized (qdev.c:876)
==169952== by 0x8E2C80: property_set_bool (object.c:2080)
==169952== by 0x8E0EF6: object_property_set (object.c:1272)
==169952== by 0x8E3FC8: object_property_set_qobject (qom-qobject.c:26)
==169952== by 0x8E11DB: object_property_set_bool (object.c:1338)
==169952== by 0x5E7BDD: qdev_device_add (qdev-monitor.c:673)
Fixes: f045a0104c ("vfio: unplug failover primary device before migration")
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As usual block all vfio-pci devices from being migrated, but make an
exception for failover primary devices. This is achieved by setting
unmigratable to 0 but also add a migration blocker for all vfio-pci
devices except failover primary devices. These will be unplugged before
migration happens by the migration handler of the corresponding
virtio-net standby device.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20191029114905.6856-12-jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following guest behaviour patter leads to double free in VFIO PCI:
1. Guest enables MSI interrupts
vfio_msi_enable is called, but fails in vfio_enable_vectors.
In our case this was because VFIO GPU device was in D3 state.
Unhappy path in vfio_msi_enable will g_free(vdev->msi_vectors) but not
set this pointer to NULL
2. Guest still sees MSI an enabled after that because emulated config
write is done in vfio_pci_write_config unconditionally before calling
vfio_msi_enable
3. Guest disables MSI interrupts
vfio_msi_disable is called and tries to g_free(vdev->msi_vectors)
in vfio_msi_disable_common => double free
Signed-off-by: Evgeny Yakovlev <wrfsh@yandex-team.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, when a notifier is attempted to be registered and its
flags are not supported (especially the MAP one) by the IOMMU MR,
we generally abruptly exit in the IOMMU code. The failure could be
handled more nicely in the caller and especially in the VFIO code.
So let's allow memory_region_register_iommu_notifier() to fail as
well as notify_flag_changed() callback.
All sites implementing the callback are updated. This patch does
not yet remove the exit(1) in the amd_iommu code.
in SMMUv3 we turn the warning message into an error message saying
that the assigned device would not work properly.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The container error integer field is currently used to store
the first error potentially encountered during any
vfio_listener_region_add() call. However this fails to propagate
detailed error messages up to the vfio_connect_container caller.
Instead of using an integer, let's use an Error handle.
Messages are slightly reworded to accomodate the propagation.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Preparation for collapsing the two byte swaps adjust_endianness and
handle_bswap into the former.
Call memory_region_dispatch_{read|write} with endianness encoded into
the "MemOp op" operand.
This patch does not change any behaviour as
memory_region_dispatch_{read|write} is yet to handle the endianness.
Once it does handle endianness, callers with byte swaps can collapse
them into adjust_endianness.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Message-Id: <8066ab3eb037c0388dfadfe53c5118429dd1de3a.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The memory_region_dispatch_{read|write} operand "unsigned size" is
being converted into a "MemOp op".
Convert interfaces by using no-op size_memop.
After all interfaces are converted, size_memop will be implemented
and the memory_region_dispatch_{read|write} operand "unsigned size"
will be converted into a "MemOp op".
As size_memop is a no-op, this patch does not change any behaviour.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <e70ff5814ac3656974180db6375397c43b0bc8b8.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-20-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
The main culprit is hw/hw.h, which supposedly includes it for
convenience.
Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
Coverity doesn't like that most callers of vfio_set_irq_signaling() check
the return value and doesn't understand the equivalence of testing the
error pointer instead. Test the return value consistently.
Reported-by: Coverity (CID 1402783)
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <156209642116.14915.9598593247782519613.stgit@gimli.home>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Report an error in case we fail to set a trigger action
on any VFIO_PCI_MSIX_IRQ_INDEX subindex. This might be
useful in debugging a device that is not working properly.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Coverity (CID 1402196)
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A vfio-ccw device may provide an async command subregion for
issuing halt/clear subchannel requests. If it is present, use
it for sending halt/clear request to the device; if not, fall
back to emulation (as done today).
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <20190613092542.2834-1-cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use the new helper.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190617101036.4087-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The code used to assign an interrupt index/subindex to an
eventfd is duplicated many times. Let's introduce an helper that
allows to set/unset the signaling for an ACTION_TRIGGER,
ACTION_MASK or ACTION_UNMASK action.
In the error message, we now use errno in case of any
VFIO_DEVICE_SET_IRQS ioctl failure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The MSI-X relocation code can sometimes be used to work around bogus
MSI-X capabilities, but this test for whether the PBA is outside of
the specified BAR causes the device to error before we can apply a
relocation. Let it proceed if we intend to relocate MSI-X anyway.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The resizable BAR capability is currently exposed read-only from the
kernel and we don't yet implement a protocol for virtualizing it to
the VM. Exposing it to the guest read-only introduces poor behavior
as the guest has no reason to test that a control register write is
accepted by the hardware. This can lead to cases where the guest OS
assumes the BAR has been resized, but it hasn't. This has been
observed when assigning AMD Vega GPUs.
Note, this does not preclude future enablement of resizable BARs, but
it's currently incorrect to expose this capability as read-only, so
better to not expose it at all.
Reported-by: James Courtier-Dutton <james.dutton@gmail.com>
Tested-by: James Courtier-Dutton <james.dutton@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Fill the new QemuDmaBuf->modifier field properly from plane info.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-id: 20190529072144.26737-3-kraxel@redhat.com
Rather than looking inside the definition of a DeviceState with
"s->qdev", use the QOM prefered style: "DEVICE(s)".
This patch was generated using the following Coccinelle script:
// Use DEVICE() macros to access DeviceState.qdev
@use_device_macro_to_access_qdev@
expression obj;
identifier dev;
@@
-&obj->dev.qdev
+DEVICE(obj)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20190528164020.32250-10-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If xres / yres were specified in QEMU command line, write them as an initial
resolution to the fw-config space on guest reset, which a later BIOS / OVMF
patch can take advantage of.
Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-4-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
'MSIX_CAP_LENGTH' is defined in two .c file. Move it
to hw/pci/msix.h file to reduce duplicated code.
CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-5-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
'eventd' should be 'eventfd'.
CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-4-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's recommended that VMStateDescription names are decoupled from QOM
type names as the latter may freely change without consideration of
migration compatibility.
Link: https://lists.gnu.org/archive/html/qemu-devel/2018-10/msg02175.html
CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-3-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The QOMConventions recommends we should use TYPE_FOO
for a TypeInfo's name. Though "vfio-pci-nohotplug" is not
used in other parts, for consistency we should make this change.
CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-2-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Here's the first ppc target pull request for qemu-4.1. This has a
number of things that have accumulated while qemu-4.0 was frozen.
* A number of emulated MMU improvements from Ben Herrenschmidt
* Assorted cleanups fro Greg Kurz
* A large set of mostly mechanical cleanups from me to make target/ppc
much closer to compliant with the modern coding style
* Support for passthrough of NVIDIA GPUs using NVLink2
As well as some other assorted fixes.
-----BEGIN PGP SIGNATURE-----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=RpAK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190426' into staging
ppc patch queue 2019-04-26
Here's the first ppc target pull request for qemu-4.1. This has a
number of things that have accumulated while qemu-4.0 was frozen.
* A number of emulated MMU improvements from Ben Herrenschmidt
* Assorted cleanups fro Greg Kurz
* A large set of mostly mechanical cleanups from me to make target/ppc
much closer to compliant with the modern coding style
* Support for passthrough of NVIDIA GPUs using NVLink2
As well as some other assorted fixes.
# gpg: Signature made Fri 26 Apr 2019 07:02:19 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.1-20190426: (36 commits)
target/ppc: improve performance of large BAT invalidations
ppc/hash32: Rework R and C bit updates
ppc/hash64: Rework R and C bit updates
ppc/spapr: Use proper HPTE accessors for H_READ
target/ppc: Don't check UPRT in radix mode when in HV real mode
target/ppc/kvm: Convert DPRINTF to traces
target/ppc/trace-events: Fix trivial typo
spapr: Drop duplicate PCI swizzle code
spapr_pci: Get rid of duplicate code for node name creation
target/ppc: Style fixes for translate/spe-impl.inc.c
target/ppc: Style fixes for translate/vmx-impl.inc.c
target/ppc: Style fixes for translate/vsx-impl.inc.c
target/ppc: Style fixes for translate/fp-impl.inc.c
target/ppc: Style fixes for translate.c
target/ppc: Style fixes for translate_init.inc.c
target/ppc: Style fixes for monitor.c
target/ppc: Style fixes for mmu_helper.c
target/ppc: Style fixes for mmu-hash64.[ch]
target/ppc: Style fixes for mmu-hash32.[ch]
target/ppc: Style fixes for misc_helper.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
