If COW areas of the newly allocated clusters are zeroes on the backing
image, efficient bdrv_write_zeroes(flags=BDRV_REQ_NO_FALLBACK) can be
used on the whole cluster instead of writing explicit zero buffers later
in perform_cow().
iotest 060:
write to the discarded cluster does not trigger COW anymore.
Use a backing image instead.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190516142749.81019-2-anton.nefedov@virtuozzo.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This attempts to clean-up the output to better match the output of the
rest of the QEMU check system when called with -makecheck. This includes:
- formatting as " TEST iotest-FMT: nnn"
- only dumping config on failure (when -makecheck enabled)
The non-make check output has been cleaned up as well:
- line re-displayed (\r) at the end
- fancy colours for pass/fail/skip
- timestamps always printed (option removed)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190503143904.31211-1-alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Currently, all tests are in the "auto" group. This is a little bit pointless.
OTOH, we need a group for the tests that we can automatically run during
"make check" each time, too. Tests in this new group are supposed to run
with every possible QEMU configuration, for example they must run with every
QEMU binary (also non-x86), without failing when an optional features is
missing (but reporting "skip" is ok), and be able to run on all kind of host
filesystems and users (i.e. also as "nobody" or "root").
So let's use the "auto" group for this class of tests now. The initial
list has been determined by running the iotests with non-x86 QEMU targets
and with our CI pipelines on Gitlab, Cirrus-CI and Travis (i.e. including
macOS and FreeBSD).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190502084506.8009-7-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
A lot of tests run fine on FreeBSD and macOS, too - the limitation
to Linux here was likely just copied-and-pasted from other tests.
Thus remove the "_supported_os Linux" line from tests that run
successful in our CI pipelines on FreeBSD and macOS.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
bash is installed in a different directory on non-Linux systems like
FreeBSD. Do not hard-code /bin/bash here so that the tests can run
there, too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qemu-system-arm, qemu-system-aarch64 and qemu-system-tricore do not have
a default machine, so when running the qemu-iotests with such a binary,
lots of tests are failing. Fix it by picking a default machine in the
"check" script instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190502084506.8009-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
"check -raw 005" fails when running on certain filesystems - these do not
support such large sparse files. Use the same check as in test 220 to
skip the test in this case.
Suggested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190502084506.8009-2-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Sometimes, 245 fails for me because some stream job has already finished
while the test expects it to still be active. (With -c none, it fails
basically every time.) The most reliable way to fix this is to simply
set auto_finalize=false so the job will remain in the block graph as
long as we need it. This allows us to drop the rate limiting, too,
which makes the test faster.
The only problem with this is that there is a single place that yields a
different error message depending on whether the stream job is still
copying data (so COR is enabled) or not (COR has been disabled, but the
job still has the WRITE_UNCHANGED permission on the target node). We
can easily address that by expecting either error message.
Note that we do not need auto_finalize=false (or rate limiting) for the
active commit job, because It never completes without an explicit
block-job-complete anyway.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
log() is in the current module, there is no need to prefix it. In fact,
doing so may make VM.run_job() unusable in tests that never use
iotests.log() themselves.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Sometimes we cannot tell which error message qemu will emit, and we do
not care. With this change, we can then just pass an array of all
possible messages to assert_qmp() and it will choose the right one.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We already have 221 for accesses through the page cache, but it is
better to create a new file for O_DIRECT instead of integrating those
test cases into 221. This way, we can make use of
_supported_cache_modes (and _default_cache_mode) so the test is
automatically skipped on filesystems that do not support O_DIRECT.
As part of the split, add _supported_cache_modes to 221. With that, it
no longer fails when run with -c none or -c directsync.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qmp_cont fails if vm in RUN_STATE_FINISH_MIGRATE, so let's wait for
final RUN_STATE_POSTMIGRATE. Also, while being here, check qmp_cont
result.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds a test for rebasing an image that currently does not
have a backing file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test case 192 calls _launch_qemu, so it also needs to _cleanup_qemu when
it's done, otherwise the QMP FIFOs stay around in scratch/. It also
creates a temporary NBD socket that needs to be removed as well at the
end of the test case.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
A recent patch results in qemu-img reporting the backing file format of
vmdk images as vmdk. This broke iotests 110 and 126.
Fixes: 7502be838e
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190415154129.31021-1-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This requires some changes to keep iotests 104 and 207 working.
qemu-img info in 104 will now return a filename including the user name
and the port, which need to be filtered by adjusting REMOTE_TEST_DIR in
common.rc. This additional information has to be marked optional,
however (which is simple as REMOTE_TEST_DIR is a regex), because
otherwise 197 and 215 would fail: They use it (indirectly) to filter
qemu-img create output which contains a backing filename they have
passed to it -- which probably does not contain a user name or port
number.
The problem in 207 is a nice one to have: qemu-img info used to return
json:{} filenames, but with this patch it returns nice plain ones. We
now need to adjust the filtering to hide the user name (and port number
while we are at it). The simplest way to do this is to include both in
iotests.remote_filename() so that bdrv_refresh_filename() will not
change it, and then iotests.img_info_log() will filter it correctly
automatically.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190225190828.17726-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_inc_refcounts_imrt() (through realloc_refcount_array()) can eat
an unpredictable amount of memory on corrupted table entries, which are
referencing regions far beyond the end of file.
Prevent this, by skipping such regions from further processing.
Interesting that iotest 138 checks exactly the behavior which we fix
here. So, change the test appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190227131433.197063-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
182 fails if qemu has no support for hotplugging of a virtio-blk device.
Using an NBD server instead works just as well for the test, even on
qemus without hotplugging support.
Fixes: 6d0a4a0fb5
Reported-by: Danilo C. L. de Paula <ddepaula@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190417153005.30096-1-mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
For some particular configurations of ext4, sizing an image to 84
sectors + 1 byte causes test failures when the size of the hole is
rounded to a 4k alignment. Let's instead size things to 128 sectors +
1 byte, as the 64k boundary is more likely to work with various hole
granularities.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190506172111.31594-1-eblake@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
The output of qemu-io changed recently - most tests have been fixed in
commit 36b9986b08 ("tests/qemu-iotests: Fix output of qemu-io
related tests") already, but a qcow1, vmdk, and nbd test were still missing.
Fixes: 99e98d7c9f ("qemu-io: Use error_[gs]et_progname()")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190501134127.21104-1-thuth@redhat.com>
[eblake: squash in NBD 083 fixes]
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
233 generally filters the port, but in two cases does not. If some
other concurrently running application has already taken port 10809,
this will result in an output mismatch. Fix this by applying the
filter in these two cases, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190506160529.6955-1-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu-img create allows giving just a format and "-o help" to get a list
of the options supported by that format. Users may not realize that the
protocol level may offer even more options, which they only get to see
by specifying a filename.
This patch adds a note to hint at that fact.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the "amend" section of 082, we perform a single "convert" test
(namely "convert -o help"). That does not make sense, especially
because we have done exactly that "convert" test earlier in 082 already.
Replacing "convert" by "amend" yields an error, which is correct because
there is no point in "amend" having a default format. The user has to
either specify the format, or give a file for qemu-img to probe.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Disk sizes close to INT64_MAX cause overflow, for some pretty
ridiculous output:
$ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nbd'
image: nbd+unix://?socket=/tmp/nbdkitHSAzNz/socket
file format: raw
virtual size: -8388607T (9223372036854775296 bytes)
disk size: unavailable
But there's no reason to have two separate implementations of integer
to human-readable abbreviation, where one has overflow and stops at
'T', while the other avoids overflow and goes all the way to 'E'. With
this patch, the output now claims 8EiB instead of -8388607T, which
really is the correct rounding of largest file size supported by qemu
(we could go 511 bytes larger if we used byte-accurate sizing instead
of rounding up to the next sector boundary, but that wouldn't change
the human-readable result).
Quite a few iotests need updates to expected output to match.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
One of the recent commits changed the way qemu-io prints out its
errors and warnings - they are now prefixed with the program name.
We've got to adapt the iotests accordingly to prevent that they
are failing.
Fixes: 99e98d7c9f ("qemu-io: Use error_[gs]et_progname()")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Filter the qemu-nbd server output to get rid of a direct reference
to my build directory.
Fixes: e9dce9cb
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
tmpfs does not support O_DIRECT. Detect this case, and skip flipping
@direct if the filesystem does not support it.
Fixes: bf3e50f623
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotest 235 currently only works with KVM - this is bad for systems where
it is not available, e.g. CI pipelines. The test also works when using
"tcg" as accelerator, so we can simply add that to the list of accelerators,
too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The base node of a block-stream operation indicates the first image
from the backing chain starting from which no data is copied to the
top node.
The block-stream job allows others to use that base image, so a second
block-stream job could be writing to it at the same time. An important
restriction is that the base image must not disappear while the stream
job is ongoing. stream_start() freezes the backing chain from top to
base with that purpose but it does it too late in the code so there is
a race condition there.
This bug was fixed in the previous commit, and this patch contains an
iotest for this scenario.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The file tests/qemu-iotests/COPYING is the same text as in the
COPYING file in the main directory. So as far as I can see, we don't
need the duplicate here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio-pci is optional on s390x, e.g. in downstream RHEL builds, it
is disabled. On s390x, virtio-ccw should be used instead. Other tests
like 051 or 240 already use virtio-scsi-ccw instead of virtio-scsi-pci
on s390x, so let's do the same here and always use virtio-scsi-ccw on
s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Both NBD_CMD_BLOCK_STATUS and structured NBD_CMD_READ will split their
reply according to bdrv_block_status() boundaries. If the block device
has a request_alignment smaller than 512, but we advertise a block
alignment of 512 to the client, then this can result in the server
reply violating client expectations by reporting a smaller region of
the export than what the client is permitted to address (although this
is less of an issue for qemu 4.0 clients, given recent client patches
to overlook our non-compliance at EOF). Since it's always better to
be strict in what we send, it is worth advertising the actual minimum
block limit rather than blindly rounding it up to 512.
Note that this patch is not foolproof - it is still possible to
provoke non-compliant server behavior using:
$ qemu-nbd --image-opts driver=blkdebug,align=512,image.driver=file,image.filename=/path/to/non-aligned-file
That is arguably a bug in the blkdebug driver (it should never pass
back block status smaller than its alignment, even if it has to make
multiple bdrv_get_status calls and determine the
least-common-denominator status among the group to return). It may
also be possible to observe issues with a backing layer with smaller
alignment than the active layer, although so far I have been unable to
write a reliable iotest for that scenario (but again, an issue like
that could be argued to be a bug in the block layer, or something
where we need a flag to bdrv_block_status() to state whether the
result must be aligned to the current layer's limits or can be
subdivided for accuracy when chasing backing files).
Anyways, as blkdebug is not normally used, and as this patch makes our
server more interoperable with qemu 3.1 clients, it is worth applying
now, even while we still work on a larger patch series for the 4.1
timeframe to have byte-accurate file lengths.
Note that the iotests output changes - for 223 and 233, we can see the
server's better granularity advertisement; and for 241, the three test
cases have the following effects:
- natural alignment: the server's smaller alignment is now advertised,
and the hole reported at EOF is now the right result; we've gotten rid
of the server's non-compliance
- forced server alignment: the server still advertises 512 bytes, but
still sends a mid-sector hole. This is still a server compliance bug,
which needs to be fixed in the block layer in a later patch; output
does not change because the client is already being tolerant of the
non-compliance
- forced client alignment: the server's smaller alignment means that
the client now sees the server's status change mid-sector without any
protocol violations, but the fact that the map shows an unaligned
mid-sector hole is evidence of the block layer problems with aligned
block status, to be fixed in a later patch
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-7-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: rebase to enhanced iotest 241 coverage]
It is desirable for 'qemu-img map' to have the same output for a file
whether it is served over file or nbd protocols. However, ever since
we implemented block status for NBD (2.12), the NBD protocol forgot to
inform the block layer that as the final layer in the chain, the
offset is valid; without an offset, the human-readable form of
qemu-img map gives up with the unhelpful:
$ nbdkit -U - data data="1" size=512 --run 'qemu-img map $nbd'
Offset Length Mapped to File
qemu-img: File contains external, encrypted or compressed clusters.
The --output=json form always works, because it is reporting the
lower-level bdrv_block_status results directly rather than trying to
filter out sparse ranges for human consumption - but now it also
shows the offset member.
With this patch, the human output changes to:
Offset Length Mapped to File
0 0x200 0 nbd+unix://?socket=/tmp/nbdkitOxeoLa/socket
This change is observable to several iotests.
Fixes: 78a33ab5
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Add a test for the NBD client workaround in the previous patch. It's
not really feasible for an iotest to assume a specific tracing engine,
so we can't really probe trace_nbd_parse_blockstatus_compliance to see
if the server was fixed vs. whether the client just worked around the
server (other than by rearranging order between code patches and this
test). But having a successful exchange sure beats the previous state
of an error message. Since format probing can change alignment, we can
use that as an easy way to test several configurations.
Not tested yet, but worth adding to this test in future patches: an
NBD server that can advertise a non-sector-aligned size (such as
nbdkit) causes qemu as the NBD client to misbehave when it rounds the
size up and accesses beyond the advertised size. Qemu as NBD server
never advertises a non-sector-aligned size (since bdrv_getlength()
currently rounds up to sector boundaries); until qemu can act as such
a server, testing that flaw will have to rely on external binaries.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-2-eblake@redhat.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: add forced-512 alignment, and nbdkit reproducer comment]
Test that mirror job actually resume on resume command after being
automatically paused on ENOSPC error.
It's a follow-up test for 8d9648cbf3
"blockjob: fix user pause in block_job_error_action"
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
232 is marked as generic, but commit 12efe428c9 added code that assumes
qcow2. What the new test really needs is backing files and support for
updating the backing file link (.bdrv_change_backing_file).
Split the non-generic code into a new test case 247 and make it work
with qed, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are various actions in this test that must be executed
sequentially, as the result of it depends on the state triggered by the
previous one.
If the last argument of _send_qemu_cmd() is an empty string, it just
sends the QMP commands without waiting for an answer. While unlikely, it
may happen that the next action in the test gets invoked before QEMU
processes the QMP request.
This issue seems to be easier to reproduce on servers with limited
resources or highly loaded.
With this change, we wait for an answer on all _send_qemu_cmd() calls.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds several tests for the x-blockdev-reopen QMP command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Until now, with auto-read-only=on we tried to open the file read-write
first and if that failed, read-only was tried. This is actually not good
enough for libvirt, which gives QEMU SELinux permissions for read-write
only as soon as it actually intends to write to the image. So we need to
be able to switch between read-only and read-write at runtime.
This patch makes auto-read-only dynamic, i.e. the file is opened
read-only as long as no user of the node has requested write
permissions, but it is automatically reopened read-write as soon as the
first writer is attached. Conversely, if the last writer goes away, the
file is reopened read-only again.
bs->read_only is no longer set for auto-read-only=on files even if the
file descriptor is opened read-only because it will be transparently
upgraded as soon as a writer is attached. This changes the output of
qemu-iotests 232.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using a different read-only setting for bs->open_flags than for the
flags to the driver's open function is just inconsistent and a bad idea.
After this patch, the temporary snapshot keeps being opened read-only if
read-only=on,snapshot=on is passed.
If we wanted to change this behaviour to make only the orginal image
file read-only, but the temporary overlay read-write (as the comment in
the removed code suggests), that change would have to be made in
bdrv_temp_snapshot_options() (where the comment suggests otherwise).
Addressing this inconsistency before introducing dynamic auto-read-only
is important because otherwise we would immediately try to reopen the
temporary overlay even though the file is already unlinked.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that we can actually resize qcow2 images with persistent bitmaps
correctly. Throw some other goofy stuff at the test while we're at it,
like adding bitmaps of different granularities and at different times.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20190311185147.52309-5-vsementsov@virtuozzo.com
[vsmentsov: drop \n from the end of test output,
test output changed a bit: some bitmaps goes in other order
int the output]
Signed-off-by: John Snow <jsnow@redhat.com>
This adds a simple test that ensures the busy bit works for push backups,
as well as doubling as bonus test for incremental backups that get interrupted
by EIO errors.
Recording bit tests are already handled sufficiently by 236.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-id: 20190223000614.13894-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
The current API allows us to report a single status, which we've defined as:
Frozen: has a successor, treated as qmp_locked, may or may not be enabled.
Locked: no successor, qmp_locked. may or may not be enabled.
Disabled: Not frozen or locked, disabled.
Active: Not frozen, locked, or disabled.
The problem is that both "Frozen" and "Locked" mean nearly the same thing,
and that both of them do not intuit whether they are recording guest writes
or not.
This patch deprecates that status field and introduces two orthogonal
properties instead to replace it.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190223000614.13894-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Test that preallocating metadata results in a somewhat larger qcow2
file, but preallocating data only affects the disk usage of the data
file and the qcow2 file stays small.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Provide an option to force QEMU to always keep the external data file
consistent as a standalone read-only raw image.
At the moment, this means making sure that write_zeroes requests are
forwarded to the data file instead of just updating the metadata, and
checking that no backing file is used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rather than requiring that the external data file node is passed
explicitly when creating the qcow2 node, store the filename in the
designated header extension during .bdrv_create and read it from there
as a default during .bdrv_open.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_alloc_compressed_cluster_offset() used to return the cluster
offset for success and 0 for error. This doesn't only conflict with 0 as
a valid host offset, but also loses the error code.
Similar to the change made to qcow2_alloc_cluster_offset() for
uncompressed clusters in commit 148da7ea9d, make the function return
0/-errno and return the allocated cluster offset in a by-reference
parameter.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds basic constants, struct fields and helper function for
external data file support to the implementation.
QCOW2_INCOMPAT_MASK and QCOW2_AUTOCLEAR_MASK are not updated yet so that
opening images with an external data file still fails (we don't handle
them correctly yet).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Various sed regexp from common.filter use sed GNU extensions.
Instead of spending time to write these regex to be POSIX compliant,
verify the GNU sed is available and use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bash is not always installed as /bin/bash. In particular on OpenBSD,
the package installs it in /usr/local/bin.
Use the 'env' shebang to search bash in the $PATH.
Patch created mechanically by running:
$ git grep -lE '#! ?/bin/bash' -- tests/qemu-iotests \
| while read f; do \
sed -i 's|^#!.\?/bin/bash$|#!/usr/bin/env bash|' $f; \
done
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some test cases require specific formats. The method decorator
skip_if_unsupported() checks if requested formats are whitelisted.
The test #139 was selected for a sample output, after running
$ ./check -qcow2 131-140
137 3s ...
138 0s ...
139 2s ...
[case not run] testBlkDebug (__main__.TestBlockdevDel): formats ['blkdebug'] are not whitelisted
[case not run] testBlkVerify (__main__.TestBlockdevDel): formats ['blkverify'] are not whitelisted
[case not run] testQuorum (__main__.TestBlockdevDel): formats ['quorum'] are not whitelisted
140 0s ...
Not run: 131 135 136
Some cases not run in: 139
Passed all 7 tests
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Supported formats listed by 'qemu' may differ from those listed by
'qemu-img' due to whitelists. Some test cases require specific formats
that may be used with qemu. They can be inquired directly by running
'qemu -drive format=help'. The response takes whitelists into account.
The method supported_formats() serves for that. The method decorator
skip_if_unsupported() checks if all requested formats are whitelisted.
If not, the test case will be skipped. That has been implemented in
the 'check' file in the way similar to the 'test notrun' mechanism.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Replace the binary mode with the default text one when *.notrun
files are opened for skipped tests. That change is made for the
compatibility with Python 3 which returns error otherwise.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 238 does not require the kvm accelerator. Using the qtest
accelerator allows the test to run in both non-kvm and non-tcg
environments.
iotests.VM implicitly uses the qtest accelerator and is really the class
that this test should be using. Switch to that instead of
qemu.QEMUMachine.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJccE9jAAoJEGV+jTOl8gnzb1cP/j99kGbgfQJA4CftO9eRXdIm
FKms4Z42n7KPus+/DphgfOXGYaHzPcqJQNguQYHuPlWaM3DWNU0rcFfAi/QdcZC1
3iYMyQwiRubjnCMN0Ab4k+GhpCPW6fea6GTzyvqha4jNRhCIhx7v54GTDfxWESQp
nqW40gAONGSG98DdFgubxg1YYqt7zlI9EVogGixe1gO9SVDkMEe7uH8tPCl9mt2m
VjN7AeP/NTDmidiwu+2LwSpDC0UmpDAsFnxGI6rDcNx8NOnjSHkSHmtxNJ8j2uZz
9P0ncGui+LfivdQh/yiBgrjTWXEXAx/oHKQCz7r8uJ8f60eYLFtjTHm//2G7lG48
luLSnNKq/niM4k/vNhBQr0ByqoHHlpmqAjbmYqw7wdvImBbkXN2Gh9kjNs55S8VZ
Z7wTceC0G7pyM3LCdFnikyCXKoRxLZ3AXQ3YXFN0PgX/IsyHVuBWBGPFkPkLwcRa
JW3DEmwx/oeTg2MKp7iA3dGTUIarbsjp+R04erMznlLvE+NgmB8ENY8T+qZ6c+NM
ZNyp1MH2nuTJsYxY3CkVKwPUqNSoaTLkMxvoZW5rKQdtvNinCYZpaeHuBchaHJed
E63r0+1n9vAMH3PHDrypW5qjcjSDBOHS+8ajhr0jr2r+6grLQKYEP8q+PwubUaMq
BsS5jOb8gLGC8ESfZxx/
=dwff
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python queue, 2019-02-22
Python:
* introduce "python" directory with module namespace
* log QEMU launch command line on qemu.QEMUMachine
Acceptance Tests:
* initrd 4GiB+ test
* migration test
* multi vm support in test class
* bump Avocado version and drop "🥑 enable"
# gpg: Signature made Fri 22 Feb 2019 19:37:07 GMT
# gpg: using RSA key 657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: expect boot to extract 2GiB+ initrd with linux-v4.16
Acceptance tests: use linux-3.6 and set vm memory to 4GiB
tests.acceptance: adds simple migration test
tests.acceptance: adds multi vm capability for acceptance tests
scripts/qemu.py: log QEMU launch command line
Introduce a Python module structure
Acceptance tests: drop usage of "🥑 enable"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When iotest 223 was first written, it didn't matter if we waited for
the qemu process to clean up. But with the introduction of a later
qemu-nbd process trying to reuse the same file, there is a race where
even though the asynchronous qemu process has responded to "quit", it
has not yet had time to unlock the file and exit, resulting in:
-[{ "start": 0, "length": 65536, "depth": 0, "zero": false, "data": false},
-{ "start": 65536, "length": 2031616, "depth": 0, "zero": false, "data": true},
-{ "start": 2097152, "length": 2097152, "depth": 0, "zero": false, "data": false}]
+qemu-nbd: Failed to blk_new_open 'tests/qemu-iotests/scratch/t.qcow2': Failed to get shared "write" lock
+Is another process using the image [tests/qemu-iotests/scratch/t.qcow2]?
+qemu-img: Could not open 'driver=nbd,server.type=unix,server.path=tests/qemu-iotests/scratch/qemu-nbd.sock,x-dirty-bitmap=qemu:dirty-bitmap:b': Failed to connect socket tests/qemu-iotests/scratch/qemu-nbd.sock: Connection refused
+./common.nbd: line 33: kill: (11122) - No such process
Fixes: ddd09448
Reported-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190305182908.13557-1-eblake@redhat.com>
Tested-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Currently any client which can complete the TLS handshake is able to use
the NBD server. The server admin can turn on the 'verify-peer' option
for the x509 creds to require the client to provide a x509 certificate.
This means the client will have to acquire a certificate from the CA
before they are permitted to use the NBD server. This is still a fairly
low bar to cross.
This adds a '--tls-authz OBJECT-ID' option to the qemu-nbd command which
takes the ID of a previously added 'QAuthZ' object instance. This will
be used to validate the client's x509 distinguished name. Clients
failing the authorization check will not be permitted to use the NBD
server.
For example to setup authorization that only allows connection from a client
whose x509 certificate distinguished name is
CN=laptop.example.com,O=Example Org,L=London,ST=London,C=GB
escape the commas in the name and use:
qemu-nbd --object tls-creds-x509,id=tls0,dir=/home/berrange/qemutls,\
endpoint=server,verify-peer=yes \
--object 'authz-simple,id=auth0,identity=CN=laptop.example.com,,\
O=Example Org,,L=London,,ST=London,,C=GB' \
--tls-creds tls0 \
--tls-authz authz0 \
....other qemu-nbd args...
NB: a real shell command line would not have leading whitespace after
the line continuation, it is just included here for clarity.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <20190227162035.18543-2-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: split long line in --help text, tweak 233 to show that whitespace
after ,, in identity= portion is actually okay]
Signed-off-by: Eric Blake <eblake@redhat.com>
When we run "certtool 2>&1 | head -1" the latter command is likely to
complete and exit before certtool has written everything it wants to
stderr. In at least the RHEL-7 gnutls 3.3.29 this causes certtool to
quit with broken pipe before it has finished writing the desired
output file to disk. This causes non-deterministic failures of the
iotest 233 because the certs are sometimes zero length files.
If certtool fails the "head -1" means we also lose any useful error
message it would have printed.
Thus this patch gets rid of the pipe and post-processes the output in a
more flexible & reliable manner.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190220145819.30969-3-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If we abort the iotest early the server.log file might contain useful
information for diagnosing the problem. Ensure its contents are
displayed in this case.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190220145819.30969-2-berrange@redhat.com>
[eblake: fix shell quoting]
Signed-off-by: Eric Blake <eblake@redhat.com>
The data type for bytes in Python 3 differs from the one in Python 2.
The type cast that is compatible with both versions was applied.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1551197495-24425-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
VDI keeps the whole bitmap in memory, and the maximum size (which is
tested here) is 2 GB. This may not be available on all machines, and it
rarely is available when running a 32 bit build.
Fix this by making VM.run_job() return the error string if an error
occurred, and checking whether that contains "Could not allocate bmap"
in 211. If so, the test is skipped.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190218180646.30282-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The previous patch includes the LUKS payload overhead into the qemu-img
measure calculation for qcow2. Update qemu-iotests 178 to exercise this
new code path.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218104525.23674-3-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This follows what qmp() does, so the output will correspond to the
actual QMP command.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190210145736.1486-11-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Adding a telnet monitor for no real purpose on a fixed port is not so
great. Just use a null monitor instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-10-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
8908b253c4 has implemented filtering of
remote paths for NFS, but forgot SSH. This patch takes care of that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-9-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
filter_qmp_testfiles() currently filters the filename only for specific
keys. However, there are more keys that take filenames (such as
block-commit's @top and @base, or ssh's @path), and it does not make
sense to list them all here. "$TEST_DIR/$PID-" should have enough
entropy not to appear anywhere randomly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
On Python 2.x, strings are not always unicode strings. This function
checks whether a given value is a plain string, or a unicode string (if
there is a difference).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
With IMGOPTSSYNTAX, $TEST_IMG is useless for this test (it only tests
the file-posix protocol driver). Therefore, if $TEST_IMG_FILE is set,
use that instead.
Because this test requires the file protocol, $TEST_IMG_FILE will always
be set if $IMGOPTSSYNTAX is true.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-5-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test creates no such file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
math.ceil() returns an integer on Python 3.x, but a float on Python 2.x.
range() always needs integers, so we need an explicit conversion on 2.x
(which does not hurt on 3.x).
It is not quite clear whether we want to support Python 2.x for any
prolonged time, but this may as well be fixed along with the other
issues some iotests have right now.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190210145736.1486-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
A previous commit removed the default filters for qmp_log with the
intention to make them explicit; but this happened only for test 206.
There are more tests (for more exotic image formats than qcow2) which
require the filename filter, though.
Note that 237 is still broken for Python 2.x, which is fixed in the next
commit.
Fixes: f8ca8609d8
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190210145736.1486-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both
refresh the filename (BDS.exact_filename) and set BDS.full_open_options.
Now that we have generic code in the central bdrv_refresh_filename() for
creating BDS.full_open_options, we can drop the latter part from all
BlockDriver.bdrv_refresh_filename() implementations.
This also means that we can drop all of the existing default code for
this from the global bdrv_refresh_filename() itself.
Furthermore, we now have to call BlockDriver.bdrv_refresh_filename()
after having set BDS.full_open_options, because the block driver's
implementation should now be allowed to depend on BDS.full_open_options
being set correctly.
Finally, with this patch we can drop the @options parameter from
BlockDriver.bdrv_refresh_filename(); also, add a comment on this
function's purpose in block/block_int.h while touching its interface.
This completely obsoletes blklogwrite's implementation of
.bdrv_refresh_filename().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-25-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of having every block driver which implements
bdrv_refresh_filename() copy all of the strong runtime options over to
bs->full_open_options, implement this process generically in
bdrv_refresh_filename().
This patch only adds this new generic implementation, it does not remove
the old functionality. This is done in a follow-up patch.
With this patch, some superfluous information (that should never have
been there) may be removed from some JSON filenames, as can be seen in
the change to iotests 110's and 228's reference outputs.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-24-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Test 110 tests relative backing filenames for complex BDS trees. Now
that the originally supposedly failing test passes, let us add a new
failing test: Quorum can never work automatically (without detecting
whether all child nodes have the same base directory, but that would be
rather inconsistent behavior).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-21-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_get_full_backing_filename_from_filename() breaks down when it comes
to JSON filenames. Using bdrv_dirname() as the basis is better because
since we have BDS, we can descend through the BDS tree to the protocol
layer, which gives us a greater probability of finding a non-JSON name;
also, bdrv_dirname() is more correct as it allows block drivers to
override the generation of that directory name in a protocol-specific
way.
We still need to keep bdrv_get_full_backing_filename_from_filename(),
though, because it has valid callers which need it during image creation
when no BDS is available yet.
This makes a test case in qemu-iotest 110, which was supposed to fail,
work. That is actually good, but we need to change the reference output
(and the comment in 110) accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-20-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function queries a node; since we cannot do that right now, it
executes query-named-block-nodes and returns the matching node's object.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190201192935.18394-8-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-7-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Basically, bdrv_refresh_filename() should respect all children of a
BlockDriverState. However, generally those children are driver-specific,
so this function cannot handle the general case. On the other hand,
there are only few drivers which use other children than @file and
@backing (that being vmdk, quorum, and blkverify).
Most block drivers only use @file and/or @backing (if they use any
children at all). Both can be implemented directly in
bdrv_refresh_filename.
The user overriding the file's filename is already handled, however, the
user overriding the backing file is not. If this is done, opening the
BDS with the plain filename of its file will not be correct, so we may
not set bs->exact_filename in that case.
iotest 051 contains test cases for overriding the backing file, and so
its output changes with this patch applied.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-6-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Since qemu currently doesn't flush persistent bitmaps to disk until
shutdown (which might be MUCH later), it's useful if 'query-block'
at least shows WHICH bitmaps will (eventually) make it to persistent
storage. Update affected iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190204210512.27458-1-eblake@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
A new test file 242 added to the qemu-iotests set. It checks
the format of qcow2 specific information for the new added
section that lists details of bitmaps.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1549638368-530182-4-git-send-email-andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: pep8 compliance, avoid trailing blank line]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
It's not enough to order the kwargs for consistent QMP log output,
we must also sort any sub-dictionaries in lists that appear as values.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Without this filter, this test sometimes fails.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch forbids attaching a disk to a SCSI device if its using a
different AioContext. Test case included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a crash when attaching two disks with the same blockdev to
a SCSI device that is using iothreads. Test case included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a crash when attaching a disk to a SCSI device using
iothreads, then detaching it and reattaching it again. Test case
included.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clarify that the number of extents provided in BlockdevCreateOptionsVmdk
must match the number of extents that will actually be used. Providing
more extents will result in an error now.
This requires adapting the test case to provide the right number of
extents.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
