It's only used in qmp_chardev_add(), so use a create() argument instead.
Also switched to typedef functions for CharDriverParse/CharDriverCreate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022100951.19562-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function is used to free the backend opaque pointer, let's name it
accordingly.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-23-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to previous change, for the remaining CharDriverState front ends
users.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DEFINE_PROP_CHR is not used (rng is not of TYPE_DEVICE)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To do the conversion, the file_backend_class_init() was moved
after the getter/setter functions. The old
file_backend_instance_init() function was removed because it is
not needed anymore.
The NULL errp arguments on the property registration calls were
changed to &error_abort.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The NULL errp arguments on the property registration calls were
changed to &error_abort.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Segfault happens when leaving qemu with msmouse backend:
#0 0x00007fa8526ac975 in raise () at /lib64/libc.so.6
#1 0x00007fa8526add8a in abort () at /lib64/libc.so.6
#2 0x0000558be78846ab in error_exit (err=16, msg=0x558be799da10 ...
#3 0x0000558be7884717 in qemu_mutex_destroy (mutex=0x558be93be750) at ...
#4 0x0000558be7549951 in qemu_chr_free_common (chr=0x558be93be750) at ...
#5 0x0000558be754999c in qemu_chr_free (chr=0x558be93be750) at ...
#6 0x0000558be7549a20 in qemu_chr_delete (chr=0x558be93be750) at ...
#7 0x0000558be754a8ef in qemu_chr_cleanup () at qemu-char.c:4643
#8 0x0000558be755843e in main (argc=5, argv=0x7ffe925d7118, ...
The chr was freed by msmouse close callback before chardev cleanup,
Then qemu_mutex_destroy triggered raise().
Because freeing chr is handled by qemu_chr_free_common, Remove the free from
msmouse_chr_close to avoid double free.
Fixes: c1111a24a3
Cc: qemu-stable@nongnu.org
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <20160915143158.4796-1-lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function qemu_chr_alloc returns NULL if it failed to open logfile by any reason,
says no write permission. For backends tty, stdio and msmouse, They need to
check this return value to avoid segfault in this case.
Signed-off-by: Lin Ma <lma@suse.com>
Cc: qemu-stable <qemu-stable@nongnu.org>
Message-Id: <20160914062250.22226-1-lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qemu_chr_fe_write method will return -1 on EAGAIN if the
chardev backend write would block. Almost no callers of the
qemu_chr_fe_write() method check the return value, instead
blindly assuming data was successfully sent. In most cases
this will lead to silent data loss on interactive consoles,
but in some cases (eg RNG EGD) it'll just cause corruption
of the protocol being spoken.
We unfortunately can't fix the virtio-console code, due to
a bug in the Linux guest drivers, which would cause the
entire Linux kernel to hang if we delay processing of the
incoming data in any way. Fixing this requires first fixing
the guest driver to not hold spinlocks while writing to the
hvc device backend.
Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When adding hostmem backend at runtime, QEMU might exit with error:
"os_mem_prealloc: Insufficient free host memory pages available to allocate guest RAM"
It happens due to os_mem_prealloc() not handling errors gracefully.
Fix it by passing errp argument so that os_mem_prealloc() could
report error to callers and undo performed allocation when
os_mem_prealloc() fails.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1469008443-72059-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJXhiZDAAoJEL/70l94x66DrGAH/10ZlIYugx6Ijn12qy3irmIC
hbMY6HWjvPlk8ZpAcPa3UXNQvqhTwqhSMXRiwp9aNPlRUqrXnDXZapQunJveKSAn
luLE8ISRKODz0W39qg6znyb4R1ipCGJWwjBCQmLWZuD7883JJ2DsykTATRx7yKQF
qsq9r/DPBTfD3vnOCTbqp0GeB80UFleTNm+K7cct8M1+WzfiwKeVHk9CAKy0fkTH
hS+YnV9UWYL6PR/w+uZ+2MfgH5er4X794+HaNbio0QJJbEZ2bsL4A3Prh7pUonN7
qJoCbT4W79scrnWQ40RbWRXOMfUk4J7gIMEZYar8z6NmqnamNZgxbWj3dv6pO+k=
=sz/L
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* SCSI scanner support
* fixes to qemu-char and net exit
* FreeBSD fixes
* Other small bugfixes
# gpg: Signature made Wed 13 Jul 2016 12:30:11 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
hostmem: detect host backend memory is being used properly
hostmem: fix QEMU crash by 'info memdev'
char: do not use atexit cleanup handler
net: do not use atexit for cleanup
slirp: use exit notifier for slirp_smb_cleanup
tap: use an exit notifier to call down_script
util: Fix MIN_NON_ZERO
qemu-sockets: use qapi_free_SocketAddress in cleanup
disas: avoid including everything in headers compiled from C++
json-streamer: fix double-free on exiting during a parse
main-loop: check return value before using pointer
Use "-s" instead of "--quiet" to resolve non-fatal build error on FreeBSD.
scsi-bus: Use longer sense buffer with scanners
scsi-bus: Add SCSI scanner support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, we use memory_region_is_mapped() to detect if the host
backend memory is being used. This works if the memory is directly
mapped into guest's address space, however, it is not true for
nvdimm as it uses aliased memory region to map the memory. This is
why this bug can happen:
https://bugzilla.redhat.com/show_bug.cgi?id=1352769
Fix it by introduce a new filed, is_mapped, to HostMemoryBackend,
we set/clear this filed accordingly when the device link/unlink to
host backend memory
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'info memdev' crashes QEMU:
(qemu) info memdev
Unexpected error in parse_str() at qapi/string-input-visitor.c:111:
Parameter 'null' expects an int64 value or range
It is caused by null uint16List is returned if 'host-nodes' is the default
value
Return MAX_NODES under this case to fix this bug
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Keep track of button changes. Send the extended 4-byte messages for
three button mice only in case we have something to report for the
middle button. Use the short 3-byte messages (original protocol for
two-button microsoft mouse) otherwise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1467625375-31774-5-git-send-email-kraxel@redhat.com
The msmouse chardev backend writes data without checking whenever there
is enough space.
That happens to work with linux guests, probably by pure luck because
the linux driver enables the fifo and the serial port emulation accepts
more data than announced via qemu_chr_be_can_write() in that case.
Handle this properly by adding a buffer to MouseState. Hook up a
CharDriverState->accept_input() handler which feeds the buffer to the
serial port. msmouse_event() only fills the buffer now, and calls the
accept_input handler too to kick off the transmission.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1467625375-31774-3-git-send-email-kraxel@redhat.com
Usually, Random Number Generator is abbreviated to RNG/rng.
so replacing RndRandom with RngRandom seems more reasonable
and keep consistent with RngBackend.
Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Message-Id: <1460684168-5403-1-git-send-email-weijg.fnst@cn.fujitsu.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QSIMPLEQ supports appending to tail in O(1) and is intrusive so
it doesn't require extra memory allocations for the bookkeeping
data.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1457010971-24771-1-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Commit d0d7708b made ChardevDummy be an empty wrapper type around
ChardevCommon. But there is no technical reason for this indirection,
so simplify the code by directly using the base type.
Also change the fallback assignment to assign u.null rather than
u.data, since a future patch will remove the data member of the C
struct generated for QAPI unions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1457106160-23614-1-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Requests are now created in the RngBackend parent class and the
code path is shared by both rng-egd and rng-random.
This commit fixes the rng-random implementation which processed
only one request at a time and simply discarded all but the most
recent one. In the guest this manifested as delayed completion
of reads from virtio-rng, i.e. a read was completed only after
another read was issued.
By switching rng-random to use the same request queue as rng-egd,
the unsafe stack-based allocation of the entropy buffer is
eliminated and replaced with g_malloc.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456994238-9585-5-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
RngBackend is now in charge of cleaning up the linked list on
instance finalization. It also exposes a function to finalize
individual RngRequest instances, called by its child classes.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456994238-9585-4-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The 'requests' field now lives in the RngBackend parent class.
There are no functional changes in this commit.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456994238-9585-3-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
rng_backend_cancel_requests had no callers and none of the code
deleted in this commit ever ran.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1456994238-9585-2-git-send-email-lprosek@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-5-git-send-email-peter.maydell@linaro.org
Typically a UNIX guest OS will log boot messages to a serial
port in addition to any graphical console. An admin user
may also wish to use the serial port for an interactive
console. A virtualization management system may wish to
collect system boot messages by logging the serial port,
but also wish to allow admins interactive access.
Currently providing such a feature forces the mgmt app
to either provide 2 separate serial ports, one for
logging boot messages and one for interactive console
login, or to proxy all output via a separate service
that can multiplex the two needs onto one serial port.
While both are valid approaches, they each have their
own downsides. The former causes confusion and extra
setup work for VM admins creating disk images. The latter
places an extra burden to re-implement much of the QEMU
chardev backends logic in libvirt or even higher level
mgmt apps and adds extra hops in the data transfer path.
A simpler approach that is satisfactory for many use
cases is to allow the QEMU chardev backends to have a
"logfile" property associated with them.
$QEMU -chardev socket,host=localhost,port=9000,\
server=on,nowait,id-charserial0,\
logfile=/var/log/libvirt/qemu/test-serial0.log
-device isa-serial,chardev=charserial0,id=serial0
This patch introduces a 'ChardevCommon' struct which
is setup as a base for all the ChardevBackend types.
Ideally this would be registered directly as a base
against ChardevBackend, rather than each type, but
the QAPI generator doesn't allow that since the
ChardevBackend is a non-discriminated union. The
ChardevCommon struct provides the optional 'logfile'
parameter, as well as 'logappend' which controls
whether QEMU truncates or appends (default truncate).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1452516281-27519-1-git-send-email-berrange@redhat.com>
[Call qemu_chr_parse_common if cd->parse is NULL. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently hostmem backend fails if CONFIG_NUMA is enabled in QEMU
(the default) but NUMA is not supported by the kernel. This makes
it impossible to use ivshmem in such configurations.
This patch fixes the problem by ignoring ENOSYS error if policy is set to
MPOL_DEFAULT. This way the code behaves in the same way as if CONFIG_NUMA
was not defined. qemu will still fail if the user specifies some other
policy, so that the user knows it.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Having creation as a member of the CharDriver struct removes the need
to export functions for qemu-char.c's usage. After the conversion,
chardev backends implemented outside qemu-char.c will not need a stub
creation function anymore.
Ultimately all drivers will be converted. For now, support the case
where cd->create == NULL.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1442231643-23630-1-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cur and buf are pointers, so the difference is a ptrdiff_t
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This fixes the following crash, introduced by commit
49d2e648e8:
$ gdb --args qemu-system-x86_64 -machine pc,mem-merge=off -object memory-backend-ram,id=ram-node0,size=1024
[...]
Program received signal SIGABRT, Aborted.
(gdb) bt
#0 0x00007ffff253b8c7 in raise () at /lib64/libc.so.6
#1 0x00007ffff253d52a in abort () at /lib64/libc.so.6
#2 0x00007ffff253446d in __assert_fail_base () at /lib64/libc.so.6
#3 0x00007ffff2534522 in () at /lib64/libc.so.6
#4 0x00005555558bb80a in qemu_opt_get_bool_helper (opts=0x55555621b650, name=name@entry=0x5555558ec922 "mem-merge", defval=defval@entry=true, del=del@entry=false) at qemu/util/qemu-option.c:388
#5 0x00005555558bbb5a in qemu_opt_get_bool (opts=<optimized out>, name=name@entry=0x5555558ec922 "mem-merge", defval=defval@entry=true) at qemu/util/qemu-option.c:398
#6 0x0000555555720a24 in host_memory_backend_init (obj=0x5555562ac970) at qemu/backends/hostmem.c:226
Instead of using qemu_opt_get_bool(), that didn't work with
qemu_machine_opts for a long time, we can use the corresponding
MachineState fields.
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Error classes other than ERROR_CLASS_GENERIC_ERROR should not be used
in new code. Hiding them in QERR_ macros makes new uses hard to spot.
Fortunately, there's just one such macro left. Eliminate it with this
coccinelle semantic patch:
@@
expression EP, E;
@@
-error_set(EP, QERR_DEVICE_NOT_FOUND, E)
+error_set(EP, ERROR_CLASS_DEVICE_NOT_FOUND, "Device '%s' not found", E)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Now that properties can be explicitly registered as an enum
type, there is no need to pass the string table to the
object_get_enum() function. The object property registration
already has a pointer to the string table.
In changing this method signature, the hostmem backend object
has to be converted to use the new enum property registration
code, which simplifies it somewhat.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The 'policy' property was being registered with a typename of
'str', but it is in fact an enum of the 'HostMemPolicy' type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Following the recent upgrade to version 1.3, extend the TPM TIS
interface with capabilities introduced for support of a TPM 2.
TPM TIS for TPM 2 introduced the following extensions beyond the
TPM TIS 1.3 (used for TPM 1.2):
- A new 32bit interface Id register was introduced.
- New flags for the status (STS) register were defined.
- New flags for the capability flags were defined.
Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2
on the backend side. Support the old TPM TIS 1.3 configuration if a
TPM 1.2 is being used. A subsequent patch will then determine which
TPM version is being used in the backend.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The functions tpm_backend_thread_tpm_reset() and iothread_find()
are completely unused, let's remove them.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The subtle difference between "property not found" and "property not
set" is already confusing enough.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
showing a memory device whose memdev is removed leads an assert:
(qemu) object_add memory-backend-ram,id=ram0,size=128M
(qemu) device_add pc-dimm,id=d0,memdev=ram0
(qemu) object_del ram0
(qemu) info memory-devices
**
ERROR:qom/object.c:1274:object_get_canonical_path_component:\
assertion failed: (obj->parent != NULL)
Aborted
The patch prevents removing an in-use mem backend and error out.
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <1427704589-7688-3-git-send-email-lma@suse.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sparse report:
backends/tpm.c:39:5: warning: returning void-valued expression
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A bunch of bugfixes - some of these will make sense for 2.1.2
I put Cc: qemu-stable included where appropriate.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUGyniAAoJECgfDbjSjVRpxg0H/j4jSEWHm/4uKSly6W4MXxhN
LghE5iAaO3awU88RiRPW/m/g6sagD9RuQAHteHkvyZ6py/li0IFvLtl66OczeSgc
rnM2n9MeYfi5Q05T+ygjqYY2ynosYhrI4iPmsnKqbqLi+WWwQHFKuYKNcNmQjmJu
Sg4KDz+W4p5j/pMUZdgf4lse3PaLXoMy4IA1HC8U1WmwvyNLZrPRTXhFn1hFbxU6
Rf604wz6gkAFvwizt2SoRMOIF4w0meCKemY1wqcwOeDWqP6Bj76RnRCrVR06AgnX
ngVsrP5SrWymqwFUP9ZpeNdBOQSxXE3zT1cE6JU3/KUvTBs6Eur4Dnz7g2mPb8I=
=nHHz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio, misc bugfixes
A bunch of bugfixes - some of these will make sense for 2.1.2
I put Cc: qemu-stable included where appropriate.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 18 Sep 2014 19:52:18 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: leave more space for BIOS allocations
virtio-pci: fix migration for pci bus master
vhost-user: fix VIRTIO_NET_F_MRG_RXBUF negotiation
virtio-pci: enable bus master for old guests
Revert "virtio: don't call device on !vm_running"
virtio-net: drop assert on vm stop
Revert "rng-egd: remove redundant free"
qdev: Move global validation to a single function
qdev: Rename qdev_prop_check_global() to qdev_prop_check_globals()
test-qdev-global-props: Test handling of hotpluggable and non-device types
test-qdev-global-props: Initialize not_used=true for all props
test-qdev-global-props: Run tests on subprocess
tests: disable global props test for old glib
test-qdev-global-props: Trivial comment fix
hw/machine: Free old values of string properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit 5e490b6a50.
Cc: qemu-stable@nongnu.org
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
When using monitor command object_add to add a memory backend whose
size is way too big to allocate memory for it, qemu just exits. In
the case we'd better give an error message and keep guest running.
The problem can be reproduced as follows:
1. run qemu
2. (monitor)object_add memory-backend-ram,size=100000G,id=ram0
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When memory is allocated on a wrong node, MPOL_MF_STRICT
doesn't move it - it just fails the allocation.
A simple way to reproduce the failure is with mlock=on
realtime feature.
The code comment actually says: "ensure policy won't be ignored"
so setting MPOL_MF_MOVE seems like a better way to do this.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory changes for QOMification and automatic tracking of MR lifetime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=M+/m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
mtree: remove write-only field
memory: Use canonical path component as the name
memory: Use memory_region_name for name access
memory: constify memory_region_name
exec: Abstract away ref to memory region names
loader: Abstract away ref to memory region names
tpm_tis: remove instance_finalize callback
memory: remove memory_region_destroy
memory: convert memory_region_destroy to object_unparent
ioport: split deletion and destruction
nic: do not destroy memory regions in cleanup functions
vga: do not dynamically allocate chain4_alias
sysbus: remove unused function sysbus_del_io
qom: object: move unparenting to the child property's release callback
qom: object: delete properties before calling instance_finalize
virtio-scsi: implement parse_cdb
scsi-block, scsi-generic: implement parse_cdb
scsi-block: extract scsi_block_is_passthrough
scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function is empty after the previous patch, so remove it.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.
Currently there is a single command implemented, "q". It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.
It can be used as:
$QEMU ... \
-device virtio-serial-device \
-device virtserialport,chardev=ctd -chardev testdev,id=ctd
or, use:
$QEMU ... \
-device virtio-serial-device \
-device virtconsole,chardev=ctd -chardev testdev,id=ctd
to bind it to virtio-serial port0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
g_free() is NULL-safe.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The next patch will modify this function to initialize state that is
common to all backends.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[Raise errors on setting properties if !CONFIG_NUMA. Add BUILD_BUG_ON
checks. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new "share" property can be used with the "memory-file" backend to
map memory with MAP_SHARED instead of MAP_PRIVATE.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
And allow preallocation of file-based memory even without -mem-prealloc.
Some care is necessary because -mem-prealloc does not allow disabling
preallocation for hostmem-file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: comment tweak
This allows the superclass to set various policies on the memory
region that the subclass creates. Drops hostmem-ram's complete method
accordingly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
..to keep names consistant.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provides framework for splitting host RAM allocation/
policies into a separate backend that could be used
by devices.
Initially only legacy RAM backend is provided, which
uses memory_region_init_ram() allocator and compatible
with every CLI option that affects memory_region_init_ram().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
I guess the error_is_set(errp) in the ObjectProperty set() methods are
merely fragile right now, because I can't find a call chain that
passes a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
in addition fix default backend leak by releasing it if its
initialization failed.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Introduces USER_CREATABLE interface that must be implemented by
objects which are designed to created with -object CLI option or
object-add QMP command.
Interface provides an ability to do an optional second stage
initialization of the object created with -object/object-add
commands. By providing complete() callback, which is called
after the object properties were set.
It allows to:
* prevents misusing of -object/object-add by filtering out
objects that are not designed for it.
* generalize second stage backend initialization instead of
adding custom APIs to perform it
* early error detection of backend initialization at -object/
object-add time rather than through a proxy DEVICE object
that tries to use backend.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The file descriptor is never initialized to -1, which makes rng-random
close stdin if an object is created and immediately destroyed. If we
change it to -1, we also need to protect qemu_set_fd_handler from
receiving a bogus file descriptor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.
Cc: qemu-stable@nongnu.org
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385023371-8198-3-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
We didn't set default chr_name, the free is redundant.
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385023371-8198-2-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename four functions in preparation for new API.
Rename qemu_timer_expired to timer_expired
Rename qemu_timer_expire_time_ns to timer_expire_time_ns
Rename qemu_timer_pending to timer_pending
Rename qemu_timer_expired_ns to timer_expired_ns
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET,
and it was issued as a bottom-half:
86e94dea5b
Which we basically used to print out a greeting/prompt for the
monitor.
AFAICT the only reason this was ever done in a BH was because in
some cases we'd modify the chr_write handler for a new chardev
backend *after* the site where we issued the reset (see:
86e94d:qemu_chr_open_stdio())
At some point this event was renamed to CHR_EVENT_OPENED, and we've
maintained the use of this BH ever since.
However, due to 9f939df955, we schedule
the BH via g_idle_add(), which is causing events to sometimes be
delivered after we've already begun processing data from backends,
leading to:
known bugs:
QMP:
session negotation resets with OPENED event, in some cases this
is causing new sessions to get sporadically reset
potential bugs:
hw/usb/redirect.c:
can_read handler checks for dev->parser != NULL, which may be
true if CLOSED BH has not been executed yet. In the past, OPENED
quiesced outstanding CLOSED events prior to us reading client
data. If it's delayed, our check may allow reads to occur even
though we haven't processed the OPENED event yet, and when we
do finally get the OPENED event, our state may get reset.
qtest.c:
can begin session before OPENED event is processed, leading to
a spurious reset of the system and irq_levels
gdbstub.c:
may start a gdb session prior to the machine being paused
To fix these, let's just drop the BH.
Since the initial reasoning for using it still applies to an extent,
work around that by deferring the delivery of CHR_EVENT_OPENED until
after the chardevs have been fully initialized, toward the end of
qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This
defers delivery long enough that we can be assured a CharDriverState
is fully initialized before CHR_EVENT_OPENED is sent.
Also, rather than requiring each chardev to do an explicit open, do it
automatically, and allow the small few who don't desire such behavior to
suppress the OPENED-on-init behavior by setting a 'explicit_be_open'
flag.
We additionally add missing OPENED events for stdio backends on w32,
which were previously not being issued, causing us to not recieve the
banner and initial prompts for qmp/hmp.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Not handling EAGAIN triggers the assert
qemu/backends/rng-random.c:44:entropy_available: assertion failed: (len != -1)
Aborted (core dumped)
This happens when starting a guest with '-device virtio-rng-pci',
issuing a 'cat /dev/hwrng' in the guest, while also doing 'cat
/dev/random' on the host.
Reported-by: yunpingzheng <yunzheng@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: eacda84dfaf2d99cf6d250b678be4e4d6c2088fb.1366108096.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The TPM subsystem does not have a full front-end/back-end separation.
The sole available backend, tpm_passthrough, depends on the data
structures of the sole available frontend, tpm_tis.
However, we can at least try to split the user interface (tpm.c) from the
implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h,
which is shared between tpm_tis.c and tpm_passthrough.c; instead it
moves more stuff to tpm_backend.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.
This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
-mon chardev=foo
Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QOM-ified the TPM support with much code borrowed from the rng implementation.
All other TPM related code moves will be provided in a subsequent patch.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-id: 1364469981.24703.1.camel@d941e-10
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To better reflect that it is for handling a backend being opened.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds 'braille' support to qapi and also switches over
the braille chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds 'msmouse' support to qapi and also switches over
the msmouse chardev initialization to the new qapi code path.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In the rng backend use qemu_open and qemu_close rather than POSIX
open/close.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since 39bffca203 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.
Fix the documented QOM examples:
sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h
Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c
This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This backend talks EGD to a CharDriverState. A typical way to invoke this would
be:
qemu -chardev socket,host=localhost,port=1024,id=chr0 \
-object rng-egd,chardev=chr0,id=egd0 \
-device virtio-rng-pci,rng=egd0
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The filename can be overridden but it expects a non-blocking source of entropy.
A typical invocation would be:
qemu -object rng-random,id=rng0 -device virtio-rng-pci,rng=rng0
This can also be used with /dev/urandom by using the command line:
qemu -object rng-random,filename=/dev/urandom,id=rng0 \
-device virtio-rng-pci,rng=rng0
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- merged header split patch into this one
v2 -> v3
- bug fix in rng-random (Paolo)
