fuse_entry_param is converted to fuse_attr on the line (by
fill_entry()), so it should have a member that mirrors fuse_attr.flags.
fill_entry() should then copy this fuse_entry_param.attr_flags to
fuse_attr.flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-3-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
FUSE_SUBMOUNTS is a pure indicator by the kernel to signal that it
supports submounts. It does not check its state in the init reply, so
there is nothing for fuse_lowlevel.c to do but to check its existence
and copy it into fuse_conn_info.capable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-2-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts the following commits due to their basis on a bogus
linux kernel header update:
c93a656f7b ("tests/acceptance: Add virtiofs_submounts.py")
45ced7ca2f ("tests/acceptance/boot_linux: Accept SSH pubkey")
08dce386e7 ("virtiofsd: Announce sub-mount points")
eba8b096c1 ("virtiofsd: Store every lo_inode's parent_dev")
ede24b6be7 ("virtiofsd: Add fuse_reply_attr_with_flags()")
e2577435d3 ("virtiofsd: Add attr_flags to fuse_entry_param")
2f10415abf ("virtiofsd: Announce FUSE_ATTR_FLAGS")
97d741cc96 ("linux/fuse.h: Pull in from Linux")
Cc: Max Reitz <mreitz@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 160385090886.20017.13382256442750027666.stgit@gimli.home
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The plain fuse_reply_attr() function does not allow setting
fuse_attr.flags, so add this new function that does.
Make fuse_reply_attr() a wrapper around it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200909184028.262297-5-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fuse_entry_param is converted to fuse_attr on the line (by
fill_entry()), so it should have a member that mirrors fuse_attr.flags.
fill_entry() should then copy this fuse_entry_param.attr_flags to
fuse_attr.flags.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200909184028.262297-4-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The fuse_attr.flags field is currently just initialized to 0, which is
valid. Thus, there is no reason not to always announce FUSE_ATTR_FLAGS
(when the kernel supports it).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200909184028.262297-3-mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If you like running QEMU as a normal user (very common for TCG runs)
but you have to run virtiofsd as a root user you run into connection
problems. Adding support for an optional --socket-group allows the
users to keep using the command line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200925125147.26943-2-alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Split long line
Fix warning reported by Clang static code analyzer:
CC tools/virtiofsd/fuse_lowlevel.o
tools/virtiofsd/fuse_lowlevel.c:195:9: warning: Value stored to 'error' is never read
error = -ERANGE;
^ ~~~~~~~
Fixes: 3db2876
Reported-by: Clang Static Analyzer
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Missing a NULL check if the argument fetch fails.
Fixes: Coverity CID 1413119
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove fuse_req_getgroups that's unused in virtiofsd; it came in
from libfuse but we don't actually use it. It was called from
fuse_getgroups which we previously removed (but had left it's header
in).
Coverity had complained about null termination in it, but removing
it is the easiest answer.
Fixes: Coverity CID: 1413117 (String not null terminated)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an option to control the size of the thread pool. Requests are now
processed in parallel by default.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running with multiple threads it can be tricky to handle
FUSE_INIT/FUSE_DESTROY in parallel with other request types or in
parallel with themselves. Serialize FUSE_INIT and FUSE_DESTROY so that
malicious clients cannot trigger race conditions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
vu_socket_path is NULL when --fd=FDNUM was used. Use
fuse_lowlevel_is_virtio() instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
lookup is a RO operations, PARALLEL_DIROPS can be enabled.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
virtiofsd can run multiply even if the vhost_user_socket is same path.
]# ./virtiofsd -o vhost_user_socket=/tmp/vhostqemu -o source=/tmp/share &
[1] 244965
virtio_session_mount: Waiting for vhost-user socket connection...
]# ./virtiofsd -o vhost_user_socket=/tmp/vhostqemu -o source=/tmp/share &
[2] 244966
virtio_session_mount: Waiting for vhost-user socket connection...
]#
The user will get confused about the situation and maybe the cause of the
unexpected problem. So it's better to prevent the multiple running.
Create a regular file under localstatedir directory to exclude the
vhost_user_socket. To create and lock the file, use qemu_write_pidfile()
because the API has some sanity checks and file lock.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Applied fixes from Stefan's review and moved osdep include
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This cleans up unfreed resources in se on quiting, including
se->virtio_dev, se->vu_socket_path, se->vu_socketfd.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Handle a
mount
hard reboot (without unmount)
mount
we get another 'init' which FUSE doesn't normally expect.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Allow init->destroy->init for mount->umount->mount
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce "-o log_level=" command line option to specify current log
level (priority), valid values are "debug info warn err", e.g.
./virtiofsd -o log_level=debug ...
So only log priority higher than "debug" will be printed to
stderr/syslog. And the default level is info.
The "-o debug"/"-d" options are kept, and imply debug log level.
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
dgilbert: Reworked for libfuse's log_func
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with fix by:
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Some FUSE message replies contain padding fields that are not
initialized by libfuse. This is fine in traditional FUSE applications
because the kernel is trusted. virtiofsd does not trust the guest and
must not expose uninitialized memory.
Use C struct initializers to automatically zero out memory. Not all of
these code changes are strictly necessary but they will prevent future
information leaks if the structs are extended.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Caller can set FUSE_WRITE_KILL_PRIV in write_flags. Parse it and pass it
to the filesystem.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Each FUSE operation involves parsing the input buffer. Currently the
code assumes the input buffer is large enough for the expected
arguments. This patch uses fuse_mbuf_iter to check the size.
Most operations are simple to convert. Some are more complicated due to
variable-length inputs or different sizes depending on the protocol
version.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is a small change in behavior: if fuse_write_in->size doesn't
match the input buffer size then the request is failed. Previously
write requests with 1 fuse_buf element would truncate to
fuse_write_in->size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Let fuse_session_process_buf_int take a fuse_bufvec * instead of a
fuse_buf; and then through to do_write_buf - where in the best
case it can pass that straight through to op.write_buf without copying
(other than skipping a header).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Although --socket-path=PATH is useful for manual invocations, management
tools typically create the UNIX domain socket themselves and pass it to
the vhost-user device backend. This way QEMU can be launched
immediately with a valid socket. No waiting for the vhost-user device
backend is required when fd passing is used.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Readv the data straight into the guests buffer.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
With fix by:
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Route fuse out messages back through the same queue elements
that had the command that triggered the request.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Listen on our unix socket for the connection from QEMU, when we get it
initialise vhost-user and dive into our own loop variant (currently
dummy).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When run with vhost-user options we conect to the QEMU instead
via a socket. Start this off by creating the socket.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add options to specify parameters for virtio-fs paths, i.e.
./virtiofsd -o vhost_user_socket=/tmp/vhostqemu
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If caller has not sent file handle in request, then using inode, retrieve
the fd opened using O_PATH and use that to open file again and issue
fsync. This will be needed when dax_flush() calls fsync. At that time
we only have inode information (and not file).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
virtiofsd only supports major=7, minor>=31; trim out a lot of
old compatibility code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All of the fuse files include config.h and define GNU_SOURCE
where we don't have either under our build - remove them.
Fixup path to the kernel's fuse.h in the QEMUs world.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Notify reply support is unused by virtiofsd. The code would need to be
updated to validate input buffer sizes. Remove this unused code since
changes to it are untestable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Classic FUSE file system daemons take a mountpoint argument but
virtiofsd exposes a vhost-user UNIX domain socket instead. The
mountpoint argument is not used by virtiofsd but the user is still
required to pass a dummy argument on the command-line.
Remove the mountpoint argument to clean up the command-line.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's a lot of the original fuse code we don't need; trim them down.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with additional trimming by:
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fuse_lowlevel is one of the largest files from the library
and does most of the work. Add it separately to keep the diff
sizes small.
Again this is from upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
