TYPE_AVR_CPU inherits TYPE_CPU, which itself inherits TYPE_DEVICE.
TYPE_DEVICE instances are realized using qdev_realize(), we don't
need to access QOM internal values.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael Rolnik <mrolnik@gmail.com>
Message-Id: <20211205224109.322152-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QEMU coding style mandates to not use Linux kernel internal
types for scalars types. Replace __u32 by uint32_t.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211116193955.2793171-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When using the MinGW toolchain, we use the .exe suffix for the
executable name. We also need to use it for the symlinks in the
build directory.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20211109144504.1541206-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The new msys2-64bit job is often running for more than 50 minutes - and
if the CI is currently loaded, it times out after 60 minutes. The job
has been declared with a bigger timeout, but seems like this is getting
ignored on the shared Gitlab-CI Windows runners, so we're currently
seeing a lot of failures with this job. Thus we have to reduce the time
it takes to finish this job. Since we want to test compiling the WHPX
and HAX accelerator code with this job, switching to another target CPU
is not really a good option, so let's reduce the amount of code that we
have to compile with the --without-default-devices switch instead.
Message-Id: <20211216082253.43899-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The DTSM is a mask that specifies which I/O Address Translation designation
types are supported. Today QEMU only supports DT=1.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We may have gotten a measurement update interval from the underlying host
via vfio -- Use it to set the interval via which we update the function
measurement block.
Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead use the values from clp info, they will either be the hard-coded
values or what came from the host driver via vfio.
Fixes: 9670ee7527 ("s390x/pci: use a PCI Function structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current default PCI group being used can technically collide with a
real group ID passed from a hostdev. Let's instead use a group ID that
comes from a special pool (0xF0-0xFF) that is architected to be reserved
for simulated devices.
Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-2-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
My borntraeger@de.ibm.com email is just a forwarder to the
linux.ibm.com address. Let us remove the extra hop to avoid
a potential source of errors.
While at it, add the relevant email addresses to mailmap.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211126102449.287524-1-borntraeger@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The CPNC portion of the diag318 data is erroneously reset during an
initial CPU reset caused by SIGP. Let's go ahead and relocate the
diag318_info field within the CPUS390XState struct such that it is
only zeroed during a clear reset. This way, the CPNC will be retained
for each VCPU in the configuration after the diag318 instruction
has been invoked.
The s390_machine_reset code already takes care of zeroing the diag318
data on VM resets, which also cover resets caused by diag308.
Fixes: fabdada935 ("s390: guest support for diagnose 0x318")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211117152303.627969-1-walling@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmG5yEgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOFkwf9Glt3tnHfO/gWZectiMAjjM8vg3cR
yEsWU0fa0iu8MO8NiOW0b6DT0yosZ8rl2SYSZBQGqwa/Lq2MZLO2v0JG4LblBom7
WVmzNOG4t0OFoE2gwMlZ2J+ppaHV5zN1Yc6lMXOVQcefY0pXoyze+0Fq/cwKf2+p
6WDZTuOpjtxMwt9n71b93kNAHagk422MpNi1xi+o37hNsm/Zh3BTtaSJ7WCkCmWq
YmwwQZgyB/V0Ah42wchuf5zxEnQPMbjaQSu8jQU4iyCB7+2biBuh3Cqw5eR8tqC1
cGNINGlo2Orl9ASyEunHyuDj8p0wN8J37wNuBo4kghhrTVsVKQYF0wmsqw==
=U1Xy
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* improve compatibility for macOS scripts/entitlement.sh (Evan)
* add support for KVM_GUESTDBG_BLOCKIRQ (Maxim)
* update linux-headers to Linux 5.16 (myself)
* configure cleanups (myself)
* lsi53c895a assertion failure fix (Philippe)
* fix incorrect description for die-id (Yanan)
* support for NUMA in SGX enclave memory (Yang Zhong)
# gpg: Signature made Wed 15 Dec 2021 02:49:44 AM PST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [unknown]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
configure: remove dead variables
doc: Add the SGX numa description
numa: Support SGX numa in the monitor and Libvirt interfaces
numa: Enable numa for SGX EPC sections
kvm: add support for KVM_GUESTDBG_BLOCKIRQ
gdbstub, kvm: let KVM report supported singlestep flags
gdbstub: reject unsupported flags in handle_set_qemu_sstep
linux-headers: update to 5.16-rc1
virtio-gpu: do not byteswap padding
scripts/entitlement.sh: Use backward-compatible cp flags
qapi/machine.json: Fix incorrect description for die-id
tests/qtest: Add fuzz-lsi53c895a-test
hw/scsi/lsi53c895a: Do not abort when DMA requested and no data queued
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The VIOT test does not always work under KVM on the virt machine:
PASS 5 qtest-aarch64/bios-tables-test /aarch64/acpi/virt/oem-fields
qemu-system-aarch64: kvm_init_vcpu: kvm_arch_init_vcpu failed (0): Invalid argument
Broken pipe
Make it TCG only.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily
-----BEGIN PGP SIGNATURE-----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=KuTi
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* ITS: error reporting cleanup
* aspeed: improve documentation
* Fix STM32F2XX USART data register readout
* allow emulated GICv3 to be disabled in non-TCG builds
* fix exception priority for singlestep, misaligned PC, bp, etc
* Correct calculation of tlb range invalidate length
* npcm7xx_emc: fix missing queue_flush
* virt: Add VIOT ACPI table for virtio-iommu
* target/i386: Use assert() to sanity-check b1 in SSE decode
* Don't include qemu-common unnecessarily
# gpg: Signature made Wed 15 Dec 2021 02:39:37 AM PST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20211215' of https://git.linaro.org/people/pmaydell/qemu-arm: (33 commits)
tests/acpi: add expected blob for VIOT test on virt machine
tests/acpi: add expected blobs for VIOT test on q35 machine
tests/acpi: add test case for VIOT
tests/acpi: allow updates of VIOT expected data files
hw/arm/virt: Use object_property_set instead of qdev_prop_set
hw/arm/virt: Reject instantiation of multiple IOMMUs
hw/arm/virt: Remove device tree restriction for virtio-iommu
hw/arm/virt-acpi-build: Add VIOT table for virtio-iommu
hw/net: npcm7xx_emc fix missing queue_flush
target/arm: Correct calculation of tlb range invalidate length
hw/arm: Don't include qemu-common.h unnecessarily
target/rx/cpu.h: Don't include qemu-common.h
target/hexagon/cpu.h: don't include qemu-common.h
include/hw/i386: Don't include qemu-common.h in .h files
target/i386: Use assert() to sanity-check b1 in SSE decode
tests/tcg: Add arm and aarch64 pc alignment tests
target/arm: Suppress bp for exceptions with more priority
target/arm: Assert thumb pc is aligned
target/arm: Take an exception if PC is misaligned
target/arm: Split compute_fsr_fsc out of arm_deliver_fault
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hi
This are the reviewed patches for the freeze period:
- colo: fix/optimize several things (rao, chen)
- shutdown qio channels correctly when an error happens (li)
- serveral multifd patches for the zero series (me)
Please apply.
Thanks, Juan.
-----BEGIN PGP SIGNATURE-----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=3ge7
-----END PGP SIGNATURE-----
Merge tag 'migration-20211214-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request
Hi
This are the reviewed patches for the freeze period:
- colo: fix/optimize several things (rao, chen)
- shutdown qio channels correctly when an error happens (li)
- serveral multifd patches for the zero series (me)
Please apply.
Thanks, Juan.
# gpg: Signature made Wed 15 Dec 2021 02:32:09 AM PST
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
* tag 'migration-20211214-pull-request' of https://gitlab.com/juan.quintela/qemu:
multifd: Make zlib compression method not use iovs
multifd: Make zstd compression method not use iovs
COLO: Move some trace code behind qemu_mutex_unlock_iothread()
multifd: Shut down the QIO channels to avoid blocking the send threads when they are terminated.
multifd: Fill offset and block for reception
multifd: remove used parameter from send_recv_pages() method
multifd: remove used parameter from send_prepare() method
multifd: The variable is only used inside the loop
multifd: Add missing documention
multifd: Rename used field to num
migration: Never call twice qemu_target_page_size()
multifd: Delete useless operation
dump: Remove is_zero_page()
migration: Remove is_zero_range()
migration/colo: Optimize COLO primary node start code path
Fixed a QEMU hang when guest poweroff in COLO mode
migration/colo: More accurate update checkpoint time
migration/ram.c: Remove the qemu_mutex_lock in colo_flush_ram_cache.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Make qtests a little bit more flexible with regards to reduced configs
* Move libssh setup from configure to meson.build
* Run device-crash-test in CI
* Add jobs for NetBSD and OpenBSD to the CI
* Test compilation with MSYS2 in the gitlab-ci, too
* Add new virtio-iommu test
-----BEGIN PGP SIGNATURE-----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=+ds5
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2021-12-15' of https://gitlab.com/thuth/qemu into staging
* Add virtio-net failover test
* Make qtests a little bit more flexible with regards to reduced configs
* Move libssh setup from configure to meson.build
* Run device-crash-test in CI
* Add jobs for NetBSD and OpenBSD to the CI
* Test compilation with MSYS2 in the gitlab-ci, too
* Add new virtio-iommu test
# gpg: Signature made Tue 14 Dec 2021 11:11:54 PM PST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* tag 'pull-request-2021-12-15' of https://gitlab.com/thuth/qemu:
gitlab-ci: Test compilation on Windows with MSYS2
tests: qtest: Add virtio-iommu test
virtio-iommu: Fix the domain_range end
virtio-iommu: Fix endianness in get_config
virtio-iommu: Remove set_config callback
gitlab-ci: Add cirrus-ci based tests for NetBSD and OpenBSD
gitlab-ci.d/buildtest: Add jobs that run the device-crash-test
Move the libssh setup from configure to meson.build
tests/qtest: Add a function to check whether a machine is available
tests/qtest: Add a function that gets a list with available machine types
tests/qtest: Fence the tests that need xlnx-zcu102 with CONFIG_XLNX_ZYNQMP_ARM
tests/qtest: Run the PPC 32-bit tests with the 64-bit target binary, too
tests/libqtest: add a migration test with two couples of failover devices
tests/libqtest: add some virtio-net failover migration cancelling tests
tests/qtest: add some tests for virtio-net failover
qtest/libqos: add a function to initialize secondary PCI buses
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
The previous commits eliminated all uses. Drop the function.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-14-armbru@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
The aspeed machines connects backends with drive_get_next() in several
counting loops, one of them in a helper function, and a conditional.
Change it to use drive_get() directly. This makes the unit numbers
explicit in the code.
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-13-armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "xlnx-zcu102" connects backends with drive_get_next() in two
counting loops, one of them in a helper function. Change it to use
drive_get() directly. This makes the unit numbers explicit in the
code.
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-12-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
drive_get_next() is basically a bad idea. It returns the "next" block
backend of a certain interface type. "Next" means bus=0,unit=N, where
subsequent calls count N up from zero, per interface type.
This lets you define unit numbers implicitly by execution order. If the
order changes, or new calls appear "in the middle", unit numbers change.
ABI break. Hard to spot in review.
Machine "xlnx-zcu102" connects backends with drive_get_next() in
several counting loops. Change it to use drive_get() directly. This
makes the unit numbers explicit in the code.
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20211117163409.3587705-11-armbru@redhat.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add two test cases for VIOT, one on the q35 machine and the other on
virt. To test complex topologies the q35 test has two PCIe buses that
bypass the IOMMU (and are therefore not described by VIOT), and two
buses that are translated by virtio-iommu.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-7-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create empty data files and allow updates for the upcoming VIOT tests.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-6-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To propagate errors to the caller of the pre_plug callback, use the
object_poperty_set*() functions directly instead of the qdev_prop_set*()
helpers.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-5-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We do not support instantiating multiple IOMMUs. Before adding a
virtio-iommu, check that no other IOMMU is present. This will detect
both "iommu=smmuv3" machine parameter and another virtio-iommu instance.
Fixes: 70e89132c9 ("hw/arm/virt: Add the virtio-iommu device tree mappings")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio-iommu is now supported with ACPI VIOT as well as device tree.
Remove the restriction that prevents from instantiating a virtio-iommu
device under ACPI.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a virtio-iommu is instantiated, describe it using the ACPI VIOT
table.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20211210170415.583179-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The rx_active boolean change to true should always trigger a try_read
call that flushes the queue.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211203221002.1719306-1-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The calculation of the length of TLB range invalidate operations
in tlbi_aa64_range_get_length() is incorrect in two ways:
* the NUM field is 5 bits, but we read only 4 bits
* we miscalculate the page_shift value, because of an
off-by-one error:
TG 0b00 is invalid
TG 0b01 is 4K granule size == 4096 == 2^12
TG 0b10 is 16K granule size == 16384 == 2^14
TG 0b11 is 64K granule size == 65536 == 2^16
so page_shift should be (TG - 1) * 2 + 12
Thanks to the bug report submitter Cha HyunSoo for identifying
both these errors.
Fixes: 84940ed825 ("target/arm: Add support for FEAT_TLBIRANGE")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/734
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211130173257.1274194-1-peter.maydell@linaro.org
A lot of C files in hw/arm include qemu-common.h when they don't
need anything from it. Drop the include lines.
omap1.c, pxa2xx.c and strongarm.c retain the include because they
use it for the prototype of qemu_get_timedate().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-id: 20211129200510.1233037-5-peter.maydell@linaro.org
The qemu-common.h header is not supposed to be included from any
other header files, only from .c files (as documented in a comment at
the start of it).
Nothing actually relies on target/rx/cpu.h including it, so we can
just drop the include.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-id: 20211129200510.1233037-4-peter.maydell@linaro.org
The qemu-common.h header is not supposed to be included from any
other header files, only from .c files (as documented in a comment at
the start of it).
Move the include to linux-user/hexagon/cpu_loop.c, which needs it for
the declaration of cpu_exec_step_atomic().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Message-id: 20211129200510.1233037-3-peter.maydell@linaro.org
The qemu-common.h header is not supposed to be included from any
other header files, only from .c files (as documented in a comment at
the start of it).
include/hw/i386/x86.h and include/hw/i386/microvm.h break this rule.
In fact, the include is not required at all, so we can just drop it
from both files.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20211129200510.1233037-2-peter.maydell@linaro.org
In the SSE decode function gen_sse(), we combine a byte
'b' and a value 'b1' which can be [0..3], and switch on them:
b |= (b1 << 8);
switch (b) {
...
default:
unknown_op:
gen_unknown_opcode(env, s);
return;
}
In three cases inside this switch, we were then also checking for
"if (b1 >= 2) { goto unknown_op; }".
However, this can never happen, because the 'case' values in each place
are 0x0nn or 0x1nn and the switch will have directed the b1 == (2, 3)
cases to the default already.
This check was added in commit c045af25a5 in 2010; the added code
was unnecessary then as well, and was apparently intended only to
ensure that we never accidentally ended up indexing off the end
of an sse_op_table with only 2 entries as a result of future bugs
in the decode logic.
Change the checks to assert() instead, and make sure they're always
immediately before the array access they are protecting.
Fixes: Coverity CID 1460207
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both single-step and pc alignment faults have priority over
breakpoint exceptions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Misaligned thumb PC is architecturally impossible.
Assert is better than proceeding, in case we've missed
something somewhere.
Expand a comment about aligning the pc in gdbstub.
Fail an incoming migrate if a thumb pc is misaligned.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For A64, any input to an indirect branch can cause this.
For A32, many indirect branch paths force the branch to be aligned,
but BXWritePC does not. This includes the BX instruction but also
other interworking changes to PC. Prior to v8, this case is UNDEFINED.
With v8, this is CONSTRAINED UNPREDICTABLE and may either raise an
exception or force align the PC.
We choose to raise an exception because we have the infrastructure,
it makes the generated code for gen_bx simpler, and it has the
possibility of catching more guest bugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will reuse this section of arm_deliver_fault for
raising pc alignment faults.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The size of the code covered by a TranslationBlock cannot be 0;
this is checked via assert in tb_gen_code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create arm_check_ss_active and arm_check_kernelpage.
Reverse the order of the tests. While it doesn't matter in practice,
because only user-only has a kernel page and user-only never sets
ss_active, ss_active has priority over execution exceptions and it
is best to keep them in the proper order.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TYPE_ARM_GICV3 device is an emulated one. When using
KVM, it is recommended to use the TYPE_KVM_ARM_GICV3 device
(which uses in-kernel support).
When using --with-devices-FOO, it is possible to build a
binary with a specific set of devices. When this binary is
restricted to KVM accelerator, the TYPE_ARM_GICV3 device is
irrelevant, and it is desirable to remove it from the binary.
Therefore introduce the CONFIG_ARM_GIC_TCG Kconfig selector
which select the files required to have the TYPE_ARM_GICV3
device, but also allowing to de-select this device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211115223619.2599282-3-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gicv3_set_gicv3state() is used by arm_gicv3_common.c in
arm_gicv3_common_realize(). Since we want to restrict
arm_gicv3_cpuif.c to TCG, extract gicv3_set_gicv3state()
to a new file. Add this file to the meson 'specific'
source set, since it needs access to "cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20211115223619.2599282-2-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix issue where the data register may be overwritten by next character
reception before being read and returned.
Signed-off-by: Olivier Hériveaux <olivier.heriveaux@ledger.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211128120723.4053-1-olivier.heriveaux@ledger.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
