Commit Graph

707 Commits

Author SHA1 Message Date
Markus Armbruster
9b3d111ad9 hw: Propagate errors through qdev_prop_set_drive()
Three kinds of callers:

1. On failure, report the error and abort

   Passing &error_abort does the job.  No functional change.

2. On failure, report the error and exit()

   This is qdev_prop_set_drive_nofail().  Error reporting moves from
   qdev_prop_set_drive() to its caller.  Because hiding away the error
   in the monitor right before exit() isn't helpful, replace
   qerror_report_err() by error_report_err().  Shouldn't make a
   difference, because qdev_prop_set_drive_nofail() should never be
   used in QMP context.

3. On failure, report the error and recover

   This is usb_msd_init() and scsi_bus_legacy_add_drive().  Error
   reporting and freeing the error object moves from
   qdev_prop_set_drive() to its callers.

   Because usb_msd_init() can't run in QMP context, replace
   qerror_report_err() by error_report_err() there.

   No functional change.

   scsi_bus_legacy_add_drive() calling qerror_report_err() is of
   course inappropriate, but this commit merely makes it more obvious.
   The next one will clean it up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425925048-15482-3-git-send-email-armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10 11:18:23 +01:00
Peter Maydell
0048fa6c80 pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place.
 All of ACPI refactoring has been merged.
 Legacy pci commands have been dropped.
 virtio header cleanup
 initial patches from virtio-1.0 branch
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/CoXAAoJECgfDbjSjVRpX7EH/RMmgtsDO4wvqJu++lHvkB/q
 kSaXZYTpJTo0i5JE7n2brwuXA4902tTg9g5TMUpGPh9Pt2QRg7RTgGC1vqZyOBos
 MPw+4BO2v66S6qgX7bOf222z7r64cHTY7pLkQlrfD4usPlu2eusZ64UTW6Ru51fW
 WF9E9aunbl+HnuCGq6Iez3sCLscTBJpU/lEr6oSyHhuq3aa0CjjraEeV0E/QcwJG
 HTUeFymL8NFvlXZblsLI++VOv7Mxpi6yiCQ5XoKpFgGMvidwo41Aso6gB3ySGxOd
 w8O3Nbu77Iw/StDRNCg/5/GapabMKh2bE4UCsYY5OS63ZtD0fl0CCblhzm/ZFPw=
 =LY/j
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio fixes and cleanups

A bunch of fixes all over the place.
All of ACPI refactoring has been merged.
Legacy pci commands have been dropped.
virtio header cleanup
initial patches from virtio-1.0 branch

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* remotes/mst/tags/for_upstream: (130 commits)
  acpi: drop unused code
  aml-build: comment fix
  acpi-build: fix typo in comment
  acpi: update generated files
  vhost user:support vhost user nic for non msi guests
  aml-build: fix build for glib < 2.22
  acpi: update generated files
  Makefile.target: binary depends on config-devices
  acpi-test-data: update after pci rewrite
  acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb().
  pci-hotplug-old: Has been dead for five major releases, bury
  pci: Give a few helpers internal linkage
  acpi: make build_*() routines static to aml-build.c
  pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs
  pc: acpi-build: drop template patching and create PCI bus tree dynamically
  tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation
  pc: acpi-build: simplify PCI bus tree generation
  tests: add ACPI blobs for qemu with bridge cases
  tests: bios-tables-test: add support for testing bridges
  tests: ACPI test blobs update due to PCI0._CRS changes
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Conflicts:
	hw/pci/pci-hotplug-old.c
2015-03-09 09:14:28 +00:00
Peter Maydell
b6d527fbc0 xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJU9WUDAAoJEEy22O7T6HE4oj4QALvuVh+ZBk9WMRs+6+e/hNwl
 EQwx3+yy1A4eB/XetCdBOT6Besk1t4snDXqw3GwCVXbRzCNOyNn+ptynDvIOMxqH
 2juKCB91yhSrgGUqx/sU3iNe9PjUE+g5MZE3BBgmjgKSNlqULP1lSKmRNfdYGH+3
 vLF2P0Qtv7AHCN+eRLZJGCD3xxaE0QAU9t77OoTyYS6KRFinAaOiU6FBTLH11xVW
 LPWU3iVY7SuE7PT8EsmAwr2Gizt/pztRSOViIqba6UxUhrRM8zjMfi7bKC+NqIP6
 aeCAoQExCvs7tVBQ/N4+NLmYzbhRdyCNxMVmWFOnF37FH9aRMZRypc0dxvEksW8p
 HsRBNXWiuQyAtdOPiaQ/XBFKzpUjFo6s6GBtPMGkXRA/6puEvzIUQZmFbWfFpkVr
 Ippj3vMTgJv9IE1wzExv9inamzko+kWPI8JQBuMN7XvNpKAMHyGmIKniNDMZaqNA
 /iFMFJXLwTNTO/oYLkHCttgfty50ktZ1wvlZnbKt4zV89Qw2lOaeGiFIgJdUcMHN
 54ssxDaoECMFiRlhqmraUg5HgjHTc5Bo0P/sp8G183Vp63mZS52/KRldvqmrM8jK
 ZpvEmbwpGzZsHsDEszInvJTUX6QTE6rSvwMJdfoy9tVWsyIGMJDiyJXotVZZZepz
 OTr6WkRo9KpYNRafuuG7
 =+CKl
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20150303-1' into staging

xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set

# gpg: Signature made Tue Mar  3 07:38:43 2015 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-usb-20150303-1:
  xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-08 07:33:45 +00:00
Laszlo Ersek
aa6857891d xhci: generate a Transfer Event for each Transfer TRB with the IOC bit set
At the moment, when the XHCI driver in edk2
(MdeModulePkg/Bus/Pci/XhciDxe/XhciDxe.inf) runs on QEMU, with the options

  -device nec-usb-xhci -device usb-kbd

it crashes with:

  ASSERT MdeModulePkg/Bus/Pci/XhciDxe/XhciSched.c(1759):
  TrsRing != ((void*) 0)

The crash hits in the following edk2 call sequence (all files under
MdeModulePkg/Bus/):

UsbEnumerateNewDev()                         [Usb/UsbBusDxe/UsbEnumer.c]
  UsbBuildDescTable()                        [Usb/UsbBusDxe/UsbDesc.c]
    UsbGetDevDesc()                          [Usb/UsbBusDxe/UsbDesc.c]
      UsbCtrlGetDesc(USB_REQ_GET_DESCRIPTOR) [Usb/UsbBusDxe/UsbDesc.c]
        UsbCtrlRequest()                     [Usb/UsbBusDxe/UsbDesc.c]
          UsbHcControlTransfer()             [Usb/UsbBusDxe/UsbUtility.c]
            XhcControlTransfer()             [Pci/XhciDxe/Xhci.c]
              XhcCreateUrb()                 [Pci/XhciDxe/XhciSched.c]
                XhcCreateTransferTrb()       [Pci/XhciDxe/XhciSched.c]
              XhcExecTransfer()              [Pci/XhciDxe/XhciSched.c]
                XhcCheckUrbResult()          [Pci/XhciDxe/XhciSched.c]
                  //
                  // look for TRB_TYPE_DATA_STAGE event [1]
                  //
              //
              // Store a copy of the device descriptor, as the hub device
              // needs this info to configure endpoint. [2]
              //
  UsbSetConfig()                             [Usb/UsbBusDxe/UsbDesc.c]
    UsbCtrlRequest(USB_REQ_SET_CONFIG)       [Usb/UsbBusDxe/UsbDesc.c]
      UsbHcControlTransfer()                 [Usb/UsbBusDxe/UsbUtility.c]
        XhcControlTransfer()                 [Pci/XhciDxe/Xhci.c]
          XhcSetConfigCmd()                  [Pci/XhciDxe/XhciSched.c]
            XhcInitializeEndpointContext()   [Pci/XhciDxe/XhciSched.c]
              //
              // allocate transfer ring for the endpoint [3]
              //

USBKeyboardDriverBindingStart()              [Usb/UsbKbDxe/EfiKey.c]
  UsbIoAsyncInterruptTransfer()              [Usb/UsbBusDxe/UsbBus.c]
    UsbHcAsyncInterruptTransfer()            [Usb/UsbBusDxe/UsbUtility.c]
      XhcAsyncInterruptTransfer()            [Pci/XhciDxe/Xhci.c]
        XhcCreateUrb()                       [Pci/XhciDxe/Xhci.c]
          XhcCreateTransferTrb()             [Pci/XhciDxe/XhciSched.c]
            XhcSyncTrsRing()                 [Pci/XhciDxe/XhciSched.c]
              ASSERT (TrsRing != NULL) [4]

UsbEnumerateNewDev() in the USB bus driver issues a GET_DESCRIPTOR
request, in order to determine the number of configurations that the
endpoint supports. The requests consists of three stages (three TRBs),
setup, data, and status. The length of the response is determined in [1],
namely from the transfer event that the host controller generates in
response to the request's middle stage (ie. the data stage).

If the length of the answer is correct (a full GET_DESCRIPTOR request
takes 18 bytes), then the XHCI driver that underlies the USB bus driver
"snoops" (caches) the descriptor data for later [2].

Later, the USB bus driver sends a SET_CONFIG request. The underlying XHCI
driver allocates a transfer ring for the endpoint, relying on the data
snooped and cached in step [2].

Finally, the USB keyboard driver submits an asynchronous interrupt
transfer to manage the keyboard. As part of this it asserts [4] that the
ring has been allocated in step [3].

And this ASSERT() fires. The root cause can be found in the way QEMU
handles the initial GET_DESCRIPTOR request.

Again, that request consists of three stages (TRBs, Transfer Request
Blocks), "setup", "data", and "status". The XhcCreateTransferTrb()
function sets the IOC ("Interrupt on Completion") flag in each of these
TRBs.

According to the XHCI specification, the host controller shall generate a
Transfer Event in response to *each* individual TRB of the request that
had the IOC flag set. This means that QEMU should queue three events:
setup, data, and status, for edk2's XHCI driver.

However, QEMU only generates two events:
- one for the setup (ie. 1st) stage,
- another for the status (ie. 3rd) stage.

No event is generated for the middle (ie. data) stage. The loop in QEMU's
xhci_xfer_report() function runs three times, but due to the "reported"
variable, only the first and the last TRBs elicit events, the middle (data
stage) results in no event queued.

As a consequence:
- When handling the GET_DESCRIPTOR request, XhcCheckUrbResult() in [1]
  does not update the response length from zero.

- XhcControlTransfer() thinks that the response is invalid (it has zero
  length payload instead of 18 bytes), hence [2] is not reached; the
  device descriptor is not stashed for later, and the number of possible
  configurations is left at zero.

- When handling the SET_CONFIG request, (NumConfigurations == 0) from
  above prevents the allocation of the endpoint's transfer ring.

- When the keyboard driver tries to use the endpoint, the ASSERT() blows
  up.

The solution is to correct the emulation in QEMU, and to generate a
transfer event whenever IOC is set in a TRB.

The patch replaces

  !reported && (IOC || foo)    == !reported && IOC ||
                                  !reported && foo

with

  IOC || (!reported && foo)    == IOC ||
                                  !reported && foo

which only changes how

  reported && IOC

is handled. (Namely, it now generates an event.)

Tested with edk2 built for "qemu-system-aarch64 -M virt" (ie.
"ArmVirtualizationQemu.dsc", aka "AAVMF"), and guest Linux.

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-03-03 08:36:58 +01:00
Markus Armbruster
f43e47dbf6 QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix use
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().

Most of its users assume the function can't fail.  Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.

Just two users remain, in util/qemu-config.c.  Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26 14:49:31 +01:00
Markus Armbruster
9af21dbee1 pci: Trivial device model conversions to realize
Convert the device models where initialization obviously can't fail.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-02-26 12:42:16 +01:00
Peter Maydell
c5c6d7f81a Clean up around error_get_pretty(), qerror_report_err()
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU5GT/AAoJEDhwtADrkYZT6H8QAJSdCnymglYhsJ0L8Pn+mFbw
 ukAxSBjZ+XJXwSBCjSLB9e2Tb6PJZAbAdQJjmI1Ijb+3cXqjRURErTsp+Caz1pjj
 Zw4v4whxNedXl+WeZEwX7sU6WlDhMEk51E1NHssd9dyZ/noEqHiw/XzoqimaYlPK
 nrSTBZ94N+F+Daw1d/cjbRMHHGVSjpVraDEPvZIkC6Mv43dGhSdCT529FXthMpUd
 OhoaQvEdy/75RqFwd4gbjHzA2qHVVsKdq8EfDdHAlcg2LSGB8zM4LlRmYxMKmy2g
 ylZLXtm6v7Pm+tYFVdLc7xWnRIh4vFXBHFJ8O9jFXziV4Nkj7s7qXdLJXxYWfRXU
 KC4/vw9IEkHWWUtn1A69ktyPFjEcnW0ieiEOA7/2FXiH7RARnWTl/YChlQrSgSAM
 zh+/01UhHvKBkxmkJIWpHzR+70A/GyubvlrcSd0g6L+g1hXEw78aryivCoFTKocl
 MNTlI7AcaGW2qpSUn5kr99aBdKD1sSdGPbNqqZMOzUekGQHeUuNNrFlvsTibMo5G
 OikdrgygmoLHBcMCgVykYoHen5lMcz+PS5aGFoGwvMV3DQZAsAwltXGeJSNck143
 WuEatwA0PhuA0S/dZMELC27kUdsbvpBUhboHuShz4pvytihWu0HmVAWDeShd9uPB
 r/WSqvETUcdSOqExGEP2
 =g7dZ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-02-18' into staging

Clean up around error_get_pretty(), qerror_report_err()

# gpg: Signature made Wed Feb 18 10:10:07 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-error-2015-02-18:
  qemu-char: Avoid qerror_report_err() outside QMP command handlers
  qemu-img: Avoid qerror_report_err() outside QMP command handlers
  vl: Avoid qerror_report_err() outside QMP command handlers
  tpm: Avoid qerror_report_err() outside QMP command handlers
  numa: Avoid qerror_report_err() outside QMP command handlers
  net: Avoid qerror_report_err() outside QMP command handlers
  monitor: Avoid qerror_report_err() outside QMP command handlers
  monitor: Clean up around monitor_handle_fd_param()
  error: Use error_report_err() where appropriate
  error: New convenience function error_report_err()
  vhost-scsi: Improve error reporting for invalid vhostfd

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-26 07:01:08 +00:00
Peter Maydell
68b459eaa6 hmp: Normalize HMP command handler names
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU5HCgAAoJEDhwtADrkYZT0gcP/ijfMUqLlOPMagm5ggDCx/HK
 IFFgcrynQNS6FwTNSIEW04So4q2EMbqwuTEpZ5pe330brGy0U/UgkVmz76BkyoXT
 9LcgKwtVytfc/niF4k5nIKXrasNG1DHPrhd+zx/oTvwmC/8r+NqHZoPOjNaOPLCX
 18SWJMy57l47XAzVOUoFHEW3mEO5YjF8qo3eRcbUWEWXkRp6wg/d2f9nkiHIAfcB
 0XVso0PUJ3jID/WkNqb9JoexTnH5rQSkbeJVZWed8iSAt2cCi+pnE/RjL75M9VF8
 3mPh2Zhi1lEV4qsYQH1OY7909RtKIj7EBDd7kuUWBi1oSIEaIn5GjNWBGCmBbPbY
 0ZVhGFXFvvtI+tPEK3aqRSlyENReT29oKfEv0LAKoUQFBl+jb7qqBns4cfOF+i26
 Tb4cnzqN1rdnlCNemTQATOrr01JAZEkdp3NHq+Bx967ocP3zxfL+pX2Q/3S8aFDs
 j9Ynq+3FvweeDKeYbHKKscELII1DZcNs1CYJOtJIl+XgzowfgpoTRP7P/e2qFM+z
 ey5qF8nc3mW8tVSkotMeeseFe9tj1xxIV+CslTRiYqnxHnmq4HgsN3DoDtnyy9De
 g3U0d9rgBKFPEkAWXg939GXbH2HVUqLkOSy50WGRruP4dzco7BhLyhQimqPchBFj
 b7P40f6NyWCYDhzJu6+N
 =Kleh
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-02-18' into staging

hmp: Normalize HMP command handler names

# gpg: Signature made Wed Feb 18 10:59:44 2015 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-monitor-2015-02-18:
  hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
  hmp: Name HMP command handler functions hmp_COMMAND()
  hmp: Clean up declarations for long-gone info handlers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-25 13:14:37 +00:00
Markus Armbruster
1ce6be24df hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.

Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.

Exceptions:

* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
  sun4m_hmp_info_pic().

* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
  lm32_hmp_info_pic().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:50 +01:00
David Gibson
c3cf77cb63 Make sysbus EHCI devices ARM only by default
A number of ARM embedded boards include EHCI USB host controllers which
appear as directly mapped devices, rather than sitting on a PCI bus.

At present code to emulate such devices is included whenever EHCI support
is included.  This patch adjusts teh config options to only include them
in builds targetting ARM by default.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
599655c91f usb: Change usb_create_simple() to abort on failure
Instead of returning null pointer.  Matches pci_create_simple(),
isa_create_simple(), sysbus_create_simple().  It's unused since the
previous commit, but I'll put it to use again shortly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
bd8b92d5c8 usb: Suppress bogus error when automatic usb-hub creation fails
USBDevice's realize method usb_qdev_realize() automatically creates a
usb-hub when only one port is left.  Creating devices in realize
methods is questionable, but works.

If usb-hub creation fails, an error is reported to stderr, but the
failure is otherwise ignored.  We then create the actual device using
the last port, which may well succeed.

Example:

    $ qemu -nodefaults -S -display none -machine usb=on -monitor stdio
    QEMU 2.2.50 monitor - type 'help' for more information
    (qemu) device_add usb-mouse
    [Repeat 36 times]
    (qemu) info usb
      Device 0.0, Port 1, Speed 12 Mb/s, Product QEMU USB Mouse
      Device 0.0, Port 2, Speed 12 Mb/s, Product QEMU USB Hub
      Device 0.0, Port 2.1, Speed 12 Mb/s, Product QEMU USB Mouse
    [More mice and hubs omitted...]
      Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse
    (qemu) device_add usb-mouse
    usb hub chain too deep
    Failed to initialize USB device 'usb-hub'
    (qemu) info usb
    [...]
      Device 0.0, Port 2.8.8.8.8.7, Speed 12 Mb/s, Product QEMU USB Mouse
      Device 0.0, Port 2.8.8.8.8.8, Speed 12 Mb/s, Product QEMU USB Mouse

Despite the "Failed" message, the command actually succeeded.

In QMP, it's worse.  When adding the 37th mouse via QMP, the command
fails with

    {"error": {"class": "GenericError", "desc": "usb hub chain too deep"}}

Additionally, "Failed to initialize USB device 'usb-hub'" is reported
on stderr.  Despite the command failure, the device was created.  This
is wrong.

Fix by avoiding qdev_init() for usb-hub creation, so we can ignore
errors cleanly.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
06f22eb78f usb: Do not prefix error_setg() messages with "Error: "
Because it produces beauties like

    (qemu) usb_add mouse
    Failed to initialize USB device 'usb-mouse': Error: tried to attach usb device QEMU USB Mouse to a bus with no free ports

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
3bc36a401e usb: Improve -usbdevice error reporting a bit
Most LegacyUSBFactory usbdevice_init() methods realize with
qdev_init_nofail(), even though their caller usbdevice_create() can
handle failure.  Okay if it really can't fail (I didn't check), but
somewhat brittle.

usb_msd_init() and usb_bt_init() call qdev_init().  The latter
additionally reports an error when qdev_init() fails.

Realization failure produces multiple error reports: a specific one
from qdev_init(), and generic ones from usb_bt_init(),
usb_create_simple(), usbdevice_create() and usb_parse().

Remove realization from the usbdevice_init() methods.  Realize in
usbdevice_create(), and produce exactly one error message there.  You
still get another one from usb_parse().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:10 +01:00
Markus Armbruster
4806ec9b2c usb: usb_create() can't fail, drop useless error handling
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18 10:53:09 +01:00
Markus Armbruster
565f65d271 error: Use error_report_err() where appropriate
Coccinelle semantic patch:

    @@
    expression E;
    @@
    -    error_report("%s", error_get_pretty(E));
    -    error_free(E);
    +    error_report_err(E);
    @@
    expression E, S;
    @@
    -    error_report("%s", error_get_pretty(E));
    +    error_report_err(E);
    (
         exit(S);
    |
         abort();
    )

Trivial manual touch-ups in block/sheepdog.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18 10:51:09 +01:00
Markus Armbruster
0c6f807f4a usb: Pair g_malloc() with g_free(), not free()
Spotted by Coverity with preview checker ALLOC_FREE_MISMATCH enabled
and my "coverity: Model g_free() isn't necessarily free()" model patch
applied.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 09:27:20 +03:00
Paolo Bonzini
e720677e32 vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR
variants.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26 12:22:44 +01:00
lijun
7251711472 usb: delete redundant brackets in usb_host_handle_control()
When see usb codes, find there are redundant brackets !((udev->port->speedmask
& USB_SPEED_MASK_SUPER)) here. So delete it.

Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-12-10 11:24:35 +03:00
Paolo Bonzini
a9be76576e hcd-musb: fix dereference null return value
usb_ep_get and usb_handle_packet can deal with a NULL device, but we have
to avoid dereferencing NULL pointers when building the id.

Thanks to Gonglei for an initial stab at fixing this.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-17 18:02:31 +01:00
Gerd Hoffmann
79ae25af15 usb-host: fix usb_host_speed_compat tyops
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2014-11-12 15:27:23 +01:00
Gerd Hoffmann
f2ad97ff81 xhci: add sanity checks to xhci_lookup_uport
Also catch xhci_lookup_uport failures in post_load.

https://bugzilla.redhat.com/show_bug.cgi?id=1074219

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-11 08:48:16 +01:00
Chris Johns
1e03e40784 Provide the missing LIBUSB_LOG_LEVEL_* for older libusb or FreeBSD. Providing just the needed value as a defined.
Signed-off-by: Chris Johns <chrisj@rtems.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-11-11 08:48:16 +01:00
Gonglei
a65e4ef90f uhci: remove useless DEBUG
commit 50dcc0f8 (uhci: tracing support) had removed
DPRINTF, the DEBUG marco is useless now, remove it.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-28 11:38:18 +01:00
Gerd Hoffmann
2aa6bfcb66 xhci: add property to turn on/off streams support
streams support in usb-redir and usb-host works only with recent enough
versions of the support libraries (libusbredir and libusbx).  Failure
mode is rather unelegant:  Any stream usb transfers will throw stall
errors.  Turning off support for streams in the xhci host controller
will work better as the guest can figure beforehand that streams are
not going to work.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2014-10-28 11:38:18 +01:00
Peter Maydell
8f4699d873 Block patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJURPo5AAoJEH8JsnLIjy/WK1gP/2PhKD4lsjQ0O9TYlwu2aWCc
 eej/z2wp47996KAkhRgS4mf/E0FnPSh80cHV1wobPJfRSTPPNuGgrmhX+HLcjlPz
 fWb3qN6Ikneou1TYCO/r1wMwhPpE1GKjZmuHQcH3B27GW5cqx/s1sPCxqwDJJnYq
 oBbbcIGZGNYLHlyJvl88gBTkIHBs5/nxhzVnPnpQi6JqtGz8CAbo6e36A5RQCqyV
 RoYEe5Lif81lZpaTpYFsoUhOcH9YtQnKoUSdAnqtXtLO9fOHsn7/75hnmT4bs5CR
 p6UAiutN+jiUcRrlF//TK5TNlS7KvOAf+LirEURAY0j5IJNXh30/5x8hXzHJxb60
 eY6ePrhnbkPeLfg1Qh/7LJyi/W0cl2YN6I2oslnMUfcumu9Ns1FfsFrFpKtgT/yM
 fkjQEo7w9khKT+iZaOm1XaNDliUKZiG2wLhni6KYAGM2edmE8W7VCkjSTFcz/4eQ
 vn7G3T1OnglW1cSt0onTAKNWn2swh0lXOXv7iBupmiNoy+hafNwTa1eHw+jjvXeF
 3WdfMxT6fRKAQUC/hwVlvyeJcZyBMG11BuovX9gNgdx5/UpWJFjxHsEmbiP9TtkO
 CJ5dGi+PgM/fxLJj4IW0zSVSL+mnhQmQdtzksU+l4GBHuErXdkt9W61sOHHQJGTf
 NGIkh6DwV4VfFZd6bzf0
 =8BaC
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block patches

# gpg: Signature made Mon 20 Oct 2014 13:04:09 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"

* remotes/kevin/tags/for-upstream: (28 commits)
  block: Make device model's references to BlockBackend strong
  block: Lift device model API into BlockBackend
  blockdev: Convert qmp_eject(), qmp_change_blockdev() to BlockBackend
  block/qapi: Convert qmp_query_block() to BlockBackend
  blockdev: Fix blockdev-add not to create DriveInfo
  blockdev: Drop superfluous DriveInfo member id
  pc87312: Drop unused members of PC87312State
  ide: Complete conversion from BlockDriverState to BlockBackend
  hw: Convert from BlockDriverState to BlockBackend, mostly
  virtio-blk: Rename VirtIOBlkConf variables to conf
  virtio-blk: Drop redundant VirtIOBlock member conf
  block: Rename BlockDriverCompletionFunc to BlockCompletionFunc
  block: Rename BlockDriverAIOCB* to BlockAIOCB*
  block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
  block: Merge BlockBackend and BlockDriverState name spaces
  block: Eliminate BlockDriverState member device_name[]
  block: Eliminate bdrv_iterate(), use bdrv_next()
  blockdev: Eliminate drive_del()
  block: Make BlockBackend own its BlockDriverState
  block: Code motion to get rid of stubs/blockdev.c
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-22 16:39:49 +01:00
Peter Maydell
895b810c12 usb: add high speed mouse & keyboard configuration
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUPl2cAAoJEEy22O7T6HE4HikP/Aoq2JHGLtEqQKzS/hH3+T7C
 FA2vyneUWKAZN5JMMArOTmIhL5lZJ4nxi6lD4+lX88RLvn2RC7mSxwE9tH412jKO
 d093y6WEpTmXfNN5uP2sy2RXr4DF+Hc2nCozMTGgnjFk5D+YN2iAEExy0UyDOmFZ
 xBbvVs61YyuC6EIGpr1gY/R7yxsflZS5KfbbhZt4sBmd9X6khXzKif3gLkIMF1SB
 jBg8zXTlnfaiFerso72sW+zRCKcK/UmwaC0lg8clIGp5s7tPRFM/6njaEHDzSYr8
 4Sgjx1qHoN5uq89W0SnKFPUbYHMZ4jkDCSN88wLmCQhJzuymoHH94SXhj9hNhhRC
 r0RUjBSGxuvwqEQImknHZ8Yis62hySK/TE8aFCEB9OB2L+4kUOxJMdDmy7E5O4vT
 anzvkL7MHOEgHc5M+T0dIzRlF/4OaHMZ4eRXe76AqqHGAa2jK8JpNYuweNjDLUJ9
 tcSS0EzLb2sZlM9eMn5xzTh1gZqoARqiWE6Q3vYyCMJgLor3IsYSC2eaL3mVezxb
 JtKEFycR1PLIEOiKC8aw0HFf3bsUhhQLYdawipSpRUNSW4143/YRcYYXB5jljuHY
 61ylv9JeRGcqzLKwmUVIsn41xDOFthnOWtC1d+y+uZ1HGk04v7K+tMyJEd6knQwd
 Ro1SUYPn/bIfGoB+AHBY
 =oWcL
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-usb-20141015-2' into staging

usb: add high speed mouse & keyboard configuration

* remotes/kraxel/tags/pull-usb-20141015-2:
  xhci: remove dead code
  usb-hid: Add high speed keyboard configuration
  usb-hid: Add high speed mouse configuration
  usb-hid: Move descriptor decision to usb-hid initfn

Conflicts:
	include/hw/i386/pc.h
[Fixed trivial merge conflict in the pc-2.1 property list]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-22 15:48:32 +01:00
Markus Armbruster
4be746345f hw: Convert from BlockDriverState to BlockBackend, mostly
Device models should access their block backends only through the
block-backend.h API.  Convert them, and drop direct includes of
inappropriate headers.

Just four uses of BlockDriverState are left:

* The Xen paravirtual block device backend (xen_disk.c) opens images
  itself when set up via xenbus, bypassing blockdev.c.  I figure it
  should go through qmp_blockdev_add() instead.

* Device model "usb-storage" prompts for keys.  No other device model
  does, and this one probably shouldn't do it, either.

* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
  blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
  which has only the BlockDriverState.

* PC87312State has an unused BlockDriverState[] member.

The next two commits take care of the latter two.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 14:02:25 +02:00
Markus Armbruster
fa1d36df74 block: Eliminate DriveInfo member bdrv, use blk_by_legacy_dinfo()
The patch is big, but all it really does is replacing

    dinfo->bdrv

by

    blk_bs(blk_by_legacy_dinfo(dinfo))

The replacement is repetitive, but the conversion of device models to
BlockBackend is imminent, and will shorten it to just
blk_legacy_dinfo(dinfo).

Line wrapping muddies the waters a bit.  I also omit tests whether
dinfo->bdrv is null, because it never is.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-10-20 13:41:27 +02:00
Peter Maydell
605c690b1b allow changing bootorder via monitor at runtime,
by making bootindex a writable qom property.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUPjeVAAoJEEy22O7T6HE4j5QP/RtecYdC9yiOGsGcI4lrDMo8
 5j61JzvY7bpPGJykXH7c8B9s3n2LQIW4rzD5mDVB/bKXPwh3SbqPBQmd1T6G7lrR
 4lV+c/pvrTDE9V1k0Favbe0pbfOkaBAnMyYEYFkoK7hzVUTN6acbkz0LhXudb4ci
 7V9wbSLnZZrTxB50NTJu17EIa7RCDKQR6urskrxAsJeqCAT7NQtXM5ls1dfGvHQs
 Tc6u4+zRqv2Rzr9YxkFKPZe55rTBMUw3fcwg9F3657dCujYvcMq8+ZwFGiMXSjll
 oUFxwgZn05aRQwxG1YfFDI576+f9ZCirkQBoDBwgp3ZSLTN8CLVDZ0X1FA7vjntH
 fr5j7D0M2ftSsUDI2E3UOzaNtbtyQaCkggl+zc0fgw7dEfbitqpUZQQ4wGngBTKJ
 BFkky+29MhBTLqBC38S9iUGqUbHbrqIHP/hSW8ixAGm4n8dul+ROgX4ynFZNOuxE
 NEA1rRspDHNVanb+gcpK0wv58vvmwbECGrovkI7ffeCo+8+MDW3ebRbQ2fIxUa4C
 KbPp6b5vICVcsG0+XRbjA2rNn76iJYCjc+PX1WQX6vgPYEPRah51G44KLyN/r8kj
 fw7wOuYomtu+2nymH/8QXBEyACiuCJLTmOykHxsrYURR3VvVeg2Z0j4e7fNOg/Is
 +d+cVKKkN8JLFRlXG8qu
 =utUi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/pull-bootindex-20141015-1' into staging

allow changing bootorder via monitor at runtime,
by making bootindex a writable qom property.

* remotes/kraxel/tags/pull-bootindex-20141015-1: (34 commits)
  bootindex: change fprintf to error_report
  bootindex: delete bootindex when device is removed
  bootindex: move calling add_boot_device_patch to bootindex setter function
  ide: add calling add_boot_device_patch in bootindex setter function
  nvma: ide: add bootindex to qom property
  usb-storage: add bootindex to qom property
  virtio-blk: alias bootindex property explicitly for virt-blk-pci/ccw/s390
  block: remove bootindex property from qdev to qom
  virtio-blk: add bootindex to qom property
  ide: add bootindex to qom property
  scsi: add bootindex to qom property
  isa-fdc: remove bootindexA/B property from qdev to qom
  redirect: remove bootindex property from qdev to qom
  vfio: remove bootindex property from qdev to qom
  pci-assign: remove bootindex property from qdev to qom
  host-libusb: remove bootindex property from qdev to qom
  virtio-net: alias bootindex property explicitly for virt-net-pci/ccw/s390
  net: remove bootindex property from qdev to qom
  usb-net: add bootindex to qom property
  vmxnet3: add bootindex to qom property
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-16 09:24:45 +01:00
Gerd Hoffmann
ac20e1bb0e xhci: remove dead code
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 13:39:48 +02:00
Jan Vesely
b13ce07688 usb-hid: Add high speed keyboard configuration
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>

[ kraxel: fixup compat property to apply to 2.1 & older ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 13:39:22 +02:00
Jan Vesely
58e4fee24a usb-hid: Add high speed mouse configuration
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>

[ kraxel: fixup compat property to apply to 2.1 & older ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 13:38:09 +02:00
Jan Vesely
ff326ffaeb usb-hid: Move descriptor decision to usb-hid initfn
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 11:08:34 +02:00
Gonglei
d749e10c4f bootindex: move calling add_boot_device_patch to bootindex setter function
On this way, we can assure the new bootindex take effect
during vm rebooting.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 10:46:01 +02:00
Gonglei
89f0762dde usb-storage: add bootindex to qom property
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

Because usb-storage rely on scsi-disk which is created
in usb_msg_realize_storage(), so we should store the SCSIDevice
pointer in MSDState struct. Only in this way, we can change
the global boot_order_list when we want to change the bootindex
during vm rebooting by calling object_property_set_int(Object(SCSIDevice),).

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 10:27:07 +02:00
Gonglei
295857994c redirect: remove bootindex property from qdev to qom
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:52:55 +02:00
Gonglei
e6adae52b1 host-libusb: remove bootindex property from qdev to qom
Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:52:54 +02:00
Gonglei
c11f4bc9ff usb-net: add bootindex to qom property
Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15 09:52:54 +02:00
Igor Mammedov
5f4d917376 usb: Convert usb devices to hotplug handler API
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:14 +02:00
Igor Mammedov
138d587afb usb: Convert usb-ccid to hotplug handler API
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:14 +02:00
Igor Mammedov
77de4a09c6 usb-storage: Drop not needed "allow_hotplug = 0"
Drop useless hack that disables hotplug on bus, after backend
storage was added to it, by setting "allow_hotplug = 0". Even
if bus is hotpluggable, it won't be possible to add another
SCSI device to bus since its realize will fail early with
error "no free target" in scsi_qdev_realize() method.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:14 +02:00
Igor Mammedov
af01492755 usb-bot: Drop not needed "allow_hotplug = 0"
Drop useless hack that disables hotplug on bus by setting
"allow_hotplug = 0". Even if bus is hotpluggable, It won't
be possible to add another SCSI device to bus since its
realization will fail early with error "no free target"
in scsi_qdev_realize() method.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:14 +02:00
Igor Mammedov
e9fd12aa0d usb-bot: Mark device as non hotpluggable
usb-bot creates SCSI bus and immediately makes it
non hotpluggable which was making not possible to
hotplug usb-bot since QEMU would abort at
bus_add_child(scsi-hd) time when usb-bot is
realized.

Mark usb-bot as not hotpluggable so that attempt
to hotplug it would error out even before it gets
to device initialization point.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-10-15 05:03:14 +02:00
Alex Bennée
bc0d104c6a ohci: drop computed flags from trace events
This exceeded the trace argument limit for LTTNG UST and wasn't really
needed as the flags value is stored anyway. Dropping this fixes the
compile failure for UST. It can probably be merged with the previous
trace shortening patch.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26 09:43:06 +01:00
Alexey Kardashevskiy
3af8f177fa ohci: Split long traces to smaller ones
Recent traces rework introduced 2 tracepoints with 13 and 20
arguments. When dtrace backend is selected
(--enable-trace-backend=dtrace), compile fails as
sys/sdt.h defines DTRACE_PROBE up to DTRACE_PROBE12 only.

This splits long tracepoints.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-09-26 09:43:06 +01:00
Gerd Hoffmann
ec56214f6f usb: tag standalone ehci as hotpluggable
Add a flag to EHCIPCIInfo saying whenever the controller supports
companions or not.  Make sure we only allow registering companions for
ehci versions supporting that.  Enable pci hotplug for the ehci
variants not supporting companions.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:08 +02:00
Gerd Hoffmann
638ca939d8 usb: tag standalone uhci as hotpluggable
uhci hostadapters in companion setups can't be hotplugged.  So leave
hotplug disabled for all ich9 variants (which are already tagged with
unplug = true in the info struct).  For the other variants we'll enable
hotplug and remove the companion setup properties.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:08 +02:00
Gerd Hoffmann
3533c3d2bf usb: tag xhci as hotpluggable
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:08 +02:00
Gonglei
7334d6507a usb-serial: only check speed once at realize time
Whatever the chardev is open or not, we should assure
the speed is matched each other. So, call usb_check_attach()
check speed. And then pass &error_abort at all calls to
usb_device_attach().

Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23 12:51:08 +02:00