Only when all other hub port's *peer* .can_receive() all return 1,
the source hub port .can_receive() return 1.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Another step in moving the vlan feature out of net core. Users only
deal with NetClientState and therefore qemu_del_vlan_client() should be
named qemu_del_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that VLANClientState has been renamed to NetClientState all 'vc'
local variables should be 'nc'. Much of the code already used 'nc' but
there are places where 'vc' needs to be renamed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The vlan feature is no longer part of net core. Rename VLANClientState
to NetClientState because net clients are not explicitly associated with
a vlan at all, instead they have a peer net client to which they are
connected.
This patch is a mechanical search-and-replace except for a few
whitespace fixups where changing VLANClientState to NetClientState
misaligned whitespace.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
There is no longer a distinction between vlan clients and non-vlan
clients in the net core. The net core only knows about point-to-point
clients which are connected to a peer. It's time to rename the global
list of net clients since it no longer refers to vlans at all.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
VLANState is no longer used and can be removed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The vlan implementation in net.c has been replaced by hubs so we can
remove the code.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of using VLANState use net/hub.h to support the vlan qdev
property. The vlan qdev property becomes an alias for the peer qdev
property but is represented as a VLAN ID number. When a VLAN ID is
selected the device will really peer with a hub port.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since hubs are now used to implement the 'vlan' feature and the vlan
argument is always NULL, remove the argument entirely and update all net
clients that use qemu_new_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Checks can be performed to make sure that hubs have at least one NIC and
one host device, warning the user if this is not the case.
Configurations which do not meet this rule tend to be broken but just
emit a warning. This patch preserves compatibility with the checks
performed by net core on vlans.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Stop using the special-case vlan code in net.c. Instead use the hub net
client to implement the vlan feature. The next patch will remove vlan
code from net.c completely.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The vlan feature can be implemented in terms of hubs. By introducing a
hub net client it becomes possible to remove the special case vlan code
from net.c and push the vlan feature out of generic networking code.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The bridge helper uses the SIOCBRADDIF ioctl to add an inteface to
a bridge. SIOCBRADDIF is not available on old Linux versions. This
patch adds support to use the SIOCDEVPRIVATE ioctl with BRCTL_ADD_IF
if SIOCBRADDIF is not available.
Reported-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If the smartcard configure check passes, add '-I\$(SRC_PATH)/libcacard'
to QEMU_INCLUDES, not QEMU_CFLAGS. Otherwise the unexpanded SRC_PATH
will cause a warning in every following configure test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix compile warning in the utimensat/futimens test ("implicit
declaration of function 'utimensat'", ditto futimens) by
adding a missing include.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix compile warning (variable 'png_ptr' set but not used) in the
PNG detection test code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The old test code raises two compiler warnings which are errors since
commit 417c9d72d4.
These errors could result in compilations with compiler flag
-march486 (so all nice features of newer processors got lost).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The distinction between QEMU_CFLAGS and CFLAGS is that the
former is for flags without which QEMU can't compile, whereas
the latter is for flags like "-g -O2" which the user can
safely override. "-march=i486" is in the former category, and
so belongs in QEMU_CFLAGS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
"+=" does not work with dash and other simple /bin/sh implementations.
The new code prepends the flag while the old code either did not work
(it continued after an error message which typically was not read) or
appended the flag. That difference should not matter here.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 417c9d72d4 all configure tests
normally run with -Werror. Some of these tests now fail because they
raised a compiler warning.
This patch fixes support for capabilities.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 417c9d72d4,
all configure tests normally run with -Werror.
Some of these tests now fail because they raised a compiler warning.
Here a build breakage for ALSA (configure --audio-drv-list=alsa) is fixed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't run configure tests with -Werror in the compiler flags. The idea
of -Werror is that it makes problems very obvious to developers, so
they get fixed quickly. However, when running configure tests, failures
due to -Werror are far from obvious -- they simply result in the test
quietly failing when it should have passed. Not using -Werror is in
line with recommended practice in the Autoconf world.
This commit is essentially backing out the changes in commit 417c9d72.
Instead we fix the problem that commit was trying to address in a
different way: we add -Werror only for the test of the nss headers,
with a comment that this is specifically intended to detect a bug
in some releases of nss.
We also have to clean up a bug in the smartcard test where it was
trying to include smartcard_cflags in the test compile flags: this
would always result in a failure with -Werror, because they include
an escaped "$(SRC_PATH)" which is only valid when used in the final
makefile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split the configure test that checks for valgrind into two, one
part checking whether we have the gcc pragma to disable unused-but-set
variables, and the other part checking for the existence of valgrind.h.
The first of these has to be compiled with -Werror and the second
does not and shouldn't generate any warnings.
This (a) allows us to enable "make errors in configure tests be
build failures" and (b) enables use of valgrind on systems with
a gcc which doesn't know about -Wunused-but-set-varibale, like
Debian squeeze.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For 9p we can get the attach request multiple times for the
same export. So don't adding migration blocker for every
attach request.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Since commit 417c9d72d4 all configure tests
normally run with -Werror. Some of these tests now fail because they
raised a compiler warning.
This patch fixes support for capabilities.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* bonzini/scsi-next: (32 commits)
virtio-scsi: enable MSI-X support
virtio-scsi: add ioeventfd support
virtio-scsi: report parameter change events
virtio-scsi: do not report dropped events after reset
virtio-scsi: Report missed events
virtio-scsi: Implement hotplug support for virtio-scsi
scsi: report parameter changes to HBA drivers
scsi-disk: report resized disk via sense codes
scsi: establish precedence levels for unit attention
scsi: introduce hotplug() and hot_unplug() interfaces for SCSI bus
scsi: add tracepoint for scsi_req_cancel
scsi-disk: removable hard disks support load/eject
scsi-disk: Fail medium writes with proper sense for readonly LUNs
scsi-disk: improve the lba-out-of-range tests for read/write/verify
scsi-disk: rd/wr/vr-protect !=0 is an error
scsi-disk: support toggling the write cache
scsi-disk: parse MODE SELECT commands and parameters
scsi-disk: fix changeable values for MODE_PAGE_R_W_ERROR
scsi-disk: adjust offsets in MODE SENSE by 2
scsi-disk: support emulated TO_DEV requests
...
* commit '6c779f22a93cc6e4565b940ef616e3efc5b50ba5':
Change ram_save_block to return -1 if there are no more changes
ram: save_live_setup() we don't need to synchronize the dirty bitmap.
ram: iterate phase
ram: save_live_complete() only do one loop
ram: save_live_setup() don't need to sent pages
savevm: split save_live into stage2 and stage3
savevm: split save_live_setup from save_live_state
savevm: introduce is_active method
savevm: Refactor cancel operation in its own operation
savevm: remove SaveLiveStateHandler
savevm: remove SaveSetParamsHandler
savevm: Live migration handlers register the struct directly
savevm: Use a struct to pass all handlers
According to the Intel manual
"Intel® 64 and IA-32 Architectures Software Developer’s Manual
Volume 3", "3.4.4 Segment Loading Instructions in IA-32e Mode":
"When in compatibility mode, FS and GS overrides operate as defined by
32-bit mode behavior regardless of the value loaded into the upper 32
linear-address bits of the hidden descriptor register base field.
Compatibility mode ignores the upper 32 bits when calculating an effective address."
However, the code misses the 64-bit mode case, where an instruction with
address and segment size override would be translated incorrectly. For example,
inc dword ptr gs:260h[ebx*4] gets incorrectly translated to:
(uint32_t)(gs.base + ebx * 4 + 0x260)
instead of
gs.base + (uint32_t)(ebx * 4 + 0x260)
Signed-off-by: Vitaly Chipounov <vitaly.chipounov@epfl.ch>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Past contributions since 2012-01-13 were only made by Red Hat people,
so they are already available under GPLv2+.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch will fix the following linking failed:
LINK qemu-ga
gcc: error: qga/../qapi-generated/qga-qapi-types.o: No such file or directory
gcc: error: qga/../qapi-generated/qga-qapi-visit.o: No such file or directory
gcc: error: qga/../qapi-generated/qga-qmp-marshal.o: No such file or directory
make: *** [qemu-ga] Error 1
Commit cdc976b040 changes the
dependencies of qemu-ga to depend "../qapi-generated/qga-qapi-types.o",
which will be expanded to "qga/../qapi-generated/qga-qapi-types.o" when
building qemu-ga.
In top-level Makefile, we defined a target "qapi-generated/qga-qapi-types.o"
which was not equal to "qga/../qapi-generated/qga-qapi-types" in the
Makefile world. So "No such file" error happened when qemu-ga was linking.
The easy approach to fix is to change the target name to
"qga/../qapi-generated/qga-qapi-types.o", but it is weird.
So, in order to solve it more graciously, I move those temporary
files(qga-qapi-*.{c,h}) qemu-ga depends on to qemu-ga/qapi-generated,
this makes dependencies more clearer.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Drop a duplicate definition of the 'disabled' property from
the escc qdev property list: this redefinition is currently
effectively ignored but will become an error. (The duplication
was inadvertently introduced in 2009 in commit ec02f7dec2.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Frber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
After commit dcff25f2cd, Dependency file
are taken from the directories that have a Makefile.objs file. This is
not enough, since files can be included from other directories.
So, pick them from directories that have an object file in them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
No reason to leave them out, and it will ensure that the dependencies
are picked up. Later we can perhaps move the files to another
directory to avoid ../ usage.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Otherwise 'make check' won't recompile files that need to be recompiled
because of header changes.
To reproduce the bug, run:
$ make check # succeeds
$ echo B0RKED > hw/mc146818rtc_regs.h
$ make check # is supposed to try to rebuild tests/rtc-test.o and fail
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The qemu_chr_new() function doesn't set errno on failure, so
don't print strerror(errno) on the error handling path when
dealing with the -serial, -parallel and -virtioconsole arguments.
This avoids nonsensical error messages like:
$ ./arm-softmmu/qemu-system-arm -serial wombat
qemu: could not open serial device 'wombat': Success
We also rephrase the message slightly to make it a little clearer
that we're expecting the name of a QEMU chr backend rather than
a host or guest serial/parallel/etc device.
Reported-by: Christian Müller <christian.mueller@heig-vd.ch>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Quote from ISA, 2.1:
For most Xtensa instructions, bit numbering is irrelevant; only the BBC
and BBS instructions assign bit numbers to values on which the processor
operates. The BBC/BBS instructions use big-endian bit ordering (0 is the
most-significant bit) on a big-endian processor configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
