$QEMU_PROG happens to be 'qemu' in my setup, so this sed command
replaces a bit too much. Restrict it to the start of the line and to
when it's followed by a colon, i.e. the form used by error messages.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Note in order to run these tests on ssh, you must be running a local
ssh daemon, and that daemon must accept loopback connections, and
ssh-agent has to be set up to allow logins on the local daemon. In
other words, the following command should just work without demanding
any passphrase:
ssh localhost
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Filter the name of the QEMU executable so the output can be diffed no
matter what QEMU_PROG is (e.g. qemu-system-x86_64).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of just checking once in exactly this order if there are
dependendies, non-COW clusters and new allocation, this starts looping
around these. This way we can, for example, gather non-COW clusters after
new allocations as long as the host cluster offsets stay contiguous.
Once handle_dependencies() is extended so that COW areas of in-flight
allocations can be overwritten, this allows to continue with gathering
other clusters (we wouldn't be able to do that without this change
because we would have missed a possible second dependency in one of the
next clusters).
This means that in the typical sequential write case, we can combine the
COW overwrite of one cluster with the allocation of the next cluster as
soon as something like Delayed COW gets actually implemented. It is only
by avoiding splitting requests this way that Delayed COW actually starts
improving performance noticably.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The old code detected an overlapping allocation even when the
allocations didn't actually overlap, but were only adjacent.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This should be based on the virtual disk size, not on the size of the
image.
Interesting observation: With some VM state stored in the image file,
percentages higher than 100% are possible, even though snapshots
themselves are ignored. This is a qcow2 bug to be fixed another day: The
VM state should be discarded in the active L2 tables after completing
the snapshot creation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check that writes to an image opened with BDRV_O_SNAPSHOT do not modify
the underlying image file.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A comment explains that -nographic hangs test case 007. This is no
longer the case so add -nographic. This makes the test suite faster and
more pleasant to run since no windows pop up.
I am not sure exactly when -nographic starting working for this case but
there is no fundamental reason why graphics are needed here. Make sure
the serial port is not on stdio, it would conflict with the monitor.
Also remove unnecessary trailing whitespace on these lines.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
If zero clusters are erroneously treated as unallocated, "qemu-img rebase"
will copy the backing file's contents onto the cluster.
The bug existed also in image streaming, but since the root cause was in
qcow2's is_allocated implementation it is enough to test it with qemu-img.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Just create lots of images and try out each of the creation options that
qcow2 provides (except backing_file/fmt for now)
I'm not totally happy with the behaviour of qemu-img in each of the
cases, but let's be explicit and update the test when we do change
things later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simple test for qemu-img compare to check it's working correctly.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Show how many clusters are compressed. This can be used to monitor how
many compressed clusters remain and whether to recompress the image.
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds the support for reporting the image end offset (in
bytes). This is particularly useful after a conversion (or a rebase)
where the destination is a block device in order to find the first
unused byte at the end of the image.
Signed-off-by: Federico Simoncelli <fsimonce@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test verifies two mirroring issues are fixed with resized images:
* sync='top' creates an image that is the proper size
* sync='full' doesn't cause an assertion failure and crash qemu
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It turned out that the change in b7ab0fea was actually a real qcow2
corruption fix. This is a reproducer for the bug.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes sense when the next commit starts using the extra buffer space
to perform many I/O operations asynchronously.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring runs, the backing files for the target may not yet be
ready. However, this means that a copy-on-write operation on the target
would fill the missing sectors with zeros. Copy-on-write only happens
if the granularity of the dirty bitmap is smaller than the cluster size
(and only for clusters that are allocated in the source after the job
has started copying). So far, the granularity was fixed to 1MB; to avoid
the problem we detected the situation and required the backing files to
be available in that case only.
However, we want to lower the granularity for efficiency, so we need
a better solution. The solution is to always copy a whole cluster the
first time it is touched. The code keeps a bitmap of clusters that
have already been allocated by the mirroring job, and only does "manual"
copy-on-write if the chunk being copied is zero in the bitmap.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds some first tests for qcow2's dependency handling when two
parallel write requests access the same cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These spelling bugs were found by codespell:
supressing -> suppressing
transfered -> transferred
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Actually writing all the content with 512 byte sector size would take
forever, therefore build the image file with a Python script and use
qemu-io for the last write that actually triggers the refcount table
growth.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new options are tested with blkdebug on both the source and the
target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that qemu-img info --backing-chain safely aborts
when an image file has a backing file infinite loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The previous block commit used absolute filenames for all block-commit
images and commands; this adds relative filenames for the same tests.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies some code and error checking, and also fixes a bug.
bdrv_find_backing_image() should only be passed absolute filenames,
or filenames relative to the chain. In the QMP message handler for
block commit, when looking up the base do so from the determined top
image, so we know it is reachable from top.
Some of the error messages put out by block-commit have changed
slightly, which causes 2 tests cases for block-commit to fail.
This patch updates the test cases to look for the correct error
output.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for each of report/ignore/stop. The tests use blkdebug
to generate an error in the middle of a script. The error is
recoverable (once = "on") so that we can test resuming a job after
stopping for an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotests.py provides a convenience function that uses Python keyword
arguments to represent QMP command arguments. However, almost all
QMP commands use dashes for argument names (the sole exception is
block_set_io_throttle), and dashes are not allowed in a keyword
argument name. Hence provide automatic conversion of underscores
to dashes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These check that a paused streaming job does not advance its offset.
Sometimes the new test fails; the map is different between the source
and the destination of the streaming because qemu-io does not always
pack adjacent clusters that have the same allocated/unallocated state.
However, this also happens with the existing test_stream testcase, and
is better fixed in qemu-io.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Derived from the streaming test cases (030), this adds the
following 9 tests:
1. For the following image chain, commit [mid] into [backing],
and use qemu-io to verify [backing] has its original data, as
well as the data from [mid]
[backing] <-- [mid] <-- [test]
2. Verifies that 'block-commit' with the 'speed' parameter sets the
speed parameter, as reported by 'query-block-jobs'
3. Verifies that a bogus 'device' parameter to 'block-commit'
results in error
4-9: Appropriate error values returned for the following argument errors:
* top == base
* top is nonexistent
* base is nonexistent
* top == active layer (this is currently not supported)
* top and base arguments are reversed
* top argument is omitted
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test case checks that streaming completes successfully when the
backing file is smaller than the image file.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When the qemu-io --nocache option is used the 039 test case cannot abort
QEMU at a point where the image is dirty. Skip the test case.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image formats with a dirty bit, like qed and qcow2, repair dirty image
files upon open with BDRV_O_RDWR. Performing automatic repair when
qemu-img check runs is not ideal because the bdrv_open() call repairs
the image before the actual bdrv_check() call from qemu-img.c.
Fix this "double repair" since it leads to confusing output from
qemu-img check. Tell the block driver that this image is being opened
just for bdrv_check(). This skips automatic repair and qemu-img.c can
invoke it manually with bdrv_check().
Update the golden output for qemu-iotests 039 to reflect the new
qemu-img check output.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of building a huge pipeline, just pass all expressions to a
single sed process.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu-iotests already filters out image creation options that may be
present or not in order to get the same output in both cases. However,
often it only considers the default value of the option. Cover all valid
values instead so that ./check -o name=value can be used successfull for
all of them.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests establishes the basic post-conditions of the qcow2 lazy
refcounts features:
1. If the image was closed normally, it is marked clean.
2. If an allocating write was performed and the image was not closed
normally, then it is marked dirty.
a. Written data can be read back successfully.
b. The image file can be repaired and will be marked clean again.
c. The image file is automatically repaired when opened read/write.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Hide the default lazy_refcounts=off output from qemu-img like we do with
other image creation options. This ensures that existing golden outputs
continue to pass despite the new option that has been added.
Note that this patch applies before the one that actually introduces the
lazy_refcounts=on|off option. This ensures git-bisect(1) continues to
work.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qed.py utility can inspect and manipulate QED image files. It can
be used for testing to see the state of image metadata and also to
inject corruptions into the image file. It also has a scrubbing feature
to copy just the metadata out of an image file, allowing users to share
broken image files without revealing data in bug reports.
This has lived in my local repo for a long time but could be useful
to others.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
check -valgrind wraps all qemu-io calls with valgrind. This makes it a
bit easier to debug problems that occur somewhere deep in a test case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This new test validates the autoclear feature bit behavior. When QEMU
opens a qcow2v3 image file with an unknown autoclear feature bit the bit
should be cleared in the image file header.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new command sets feature bits in the image file header:
qcow2.py set-feature-bit incompatible|compatible|autoclear <bit>
The bit number must be in the range [0, 64).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This one is a bit more interesting. The COW operation isn't performed
completely synchronously, and therefore dependencies must be handled
correctly when multiple requests write to the same unallocated cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Looks like we're still missing these very basic tests for backing file
handling.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This way, they will not execute any VM code at all. However, right now
the cancellation test is "relying" on being slowed down by TCG executing
BIOS code. So, change the timeouts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The TestStreamStop test case is racy; if the job completes before we can
cancel it, it fails. If we remove the sleep the job will be canceled
before it has even started, and the test succeeds but it is also not
testing anything interesting.
But if the image is left sparse, then the job has really nothing to do.
For qcow2 it will read one L2-table, for raw it will issue a bunch of
ioctls. This also falls under "not testing anything interesting", and
this may be happening right now (depending on the filesystem) since the
file protocol got an is_allocated method.
Filling the test image with data ensures that the test covers the
intended case. It also slows down the test, which will be particularly
important after the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 035 parallel aio write test relies on knowledge of qcow2 metadata
layout to stress parallel L2 table accesses. This only works for qcow2
unless we add additional calculations for qed or other formats.
Mark this test as qcow2-only.
Note that the test is strictly speaking non-deterministic although the
output produced is reliable with qcow2. This is because the aio_write
command returns before the aio write request has completed. Completions
can occur at any time afterwards and cause a message to be printed.
Therefore the exact output of this test is not deterministic but we seem
to get away with it for qcow2 (maybe due to coroutine and main loop
scheduling).
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unallocated sectors should really never be accessed by the guest,
so there's no need to copy them during the streaming process.
If they are read by the guest during streaming, guest-initiated
copy-on-read will copy them (we're in the base == NULL case, which
enables copy on read). If they are read after we disconnect the
image from the base, they will read as zeroes anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test on sectors not allocated can fail if the L1/L2 tables are
not on disk yet. Allow tests to shutdown the VM early.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-io's cvtstr function sometimes will incorrectly omit the
decimal part of the number, and sometimes will incorrectly include
it. This patch fixes both. The former is more serious, and can
be seen in the patches to 027.out and 033.out.
The changes to all other files were scripted with sed, so there were
no "surprises" beyond 027.out and 033.out.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A trailing space is left when qemu-img has no arguments, for example if
-nocache is not used. This becomes an empty argument after split()
and causes qemu-io to fail.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test case manages to let qcow2 abort because its cache is used up
and it can't find free cache entries for new requests any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We added image fragmentation statistics functions to qemu-img several days
ago, those patches will cause "./check -qed" failed. This patch will ignore
fragmentation statistics information of qed format, and then "./check -qed"
will work.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add tests to exercise the InvalidParameter 'speed' error code path, as
well as the regular success case for setting the speed. The
block-stream 'speed' parameter allows the speed limit of the job to be
applied immediately when the job starts instead of issuing a separate
block-job-set-speed command later. If the parameter has an invalid
value we expect to get an error and the job is not created.
It turns out that cancelling a block job is a common operation in these
test cases, let's extract a cancel_and_wait() function instead of
duplicating the QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The block streaming and job commands used '_' instead of '-' for reasons
of compatibility with libvirt, which already included support for the
'_' naming. However, the semantics of block_job_cancel have changed and
libvirt now needs to handle the new semantics.
Since the old semantics were never in a QEMU release we can still rename
the commands to use '-' instead of '_'. Libvirt is also happy because
the new name can be used to distinguish QEMU binaries that support the
latest block-job-cancel semantics from those that include a downstream
block_job_cancel command.
Therefore, let's apply the QAPI/QMP naming rules to the block streaming
and job commands. QEMU 1.1 will be the first release with these
commands so no upstream users can break.
Note that HMP commands are left with '_' because that is the convention
there.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qcow2.py must be updated to work with version 3 images at all, the
output has changed since the feature table extension has been added, and
version 2 and version 3 images can't possibly have the same test output.
Change the test case to completely ignore IMGOPTS and run the test for
both compat=1.1 and compat=0.10 regardless of the ./check command line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds an -o option to qemu-iotests, which is an option string that
is passed through to qemu-img create -o... This allows testing different
subformat with a command like './check -qcow2 -o compat=0.10'.
For qcow2, if no compat option is specified, compat=1.1 is the new
default.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
`hostname -s` may output an errror:
hostname: Name or service not known
This causes all tests to fail for `make check-block`.
Suppress such error messages, letting the tests succeed.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According comment, we should not read again, we will write.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the BlockDriverState is closed/freed without draining the AIO
requests first, the request coroutines may work on invalid data and file
descriptors or have some dangling pointers that cause segfaults.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Some image formats do have a cluster size, others don't, but there are
tests that work with both sets of images and currently we get failures
because the qemu-img create output doesn't mention the cluster size for
some formats.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-io requires options first, then fixed parameters.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img requires first options, then file name, then size.
GNU getopt also allows options at the end, but POSIX getopt
doesn't. Try "export POSIXLY_CORRECT=y" to get the POSIX
behaviour with GNU getopt, too.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The immportant thing here is that header extensions don't get silently
dropped when the header is rewritten, e.g. during a rebase.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a tool that is meant to inspect and edit qcow2 files in a
low-level way, that wouldn't be possible with qemu-img/io, for example
by adding yet unknown extensions or flags. This way we can test whether
qemu deals properly with future backwards compatible extensions.
For now, let's start with the image header and header extensions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This creates a new test group 'quick' for some test case that take at
most a couple of seconds each, so that the group can be run during a
quick 'make check'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests that qemu-img rebase doesn't assume that the backing file has
the same size as the image, but considers that it can be smaller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
qemu-iotests supports the -nocache option which makes the tests run with
cache=none. For blkdebug tests with qcow2 this means that we may see
test results that differ from cache=writethrough. This patch makes the
diff a bit smaller and therefore easier to review.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This one makes it possible to run qemu-iotests on a Windows build using Wine
and get somewhat meaningful results.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds a test suite for the image streaming feature. It
exercises the 'block_stream', 'block_job_cancel', 'block_job_set_speed',
and 'query-block-jobs' QMP commands.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block layer tests that involve QMP commands rather than qemu-img or
qemu-io are not well-suited for shell scripting. This patch adds a
Python module which allows tests to be written in Python instead.
The basic API is:
VM - class for launching and interacting with a VM
QMPTestCase - abstract base class for tests that use QMP
qemu_img() - wrapper function for invoking qemu-img
qemu_io() - wrapper function for invoking qemu-io
imgfmt - the image format under test (e.g. qcow2, qed)
test_dir - scratch directory path for temporary files
main() - entry point for running tests
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since qemu-iotests may need to create large image files it is possible
to specify the test directory. The TEST_DIR variable needs to be
exported so non-bash tests can make use of it.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we might want to test arbitrary qemu, qemu-img and
qemu-io paths, allow users to specify environment variable
values for QEMU_PROG, QEMU_IMG_PROG and QEMU_IO_PROG so
the testsuite will use those values rather than find them
on PATH. Obviously, if such env variables are not set
prior to script execution, normal detection mechanism
takes place.
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Print the paths of the programs under test
(qemu, qemu-img and qemu-io).
Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Test loading internal snapshots where the L1 table of the snapshot
is smaller than the current L1 table.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Until recently, qemu-img create displayed cluster_size=0 for the default
cluster size. It is changed to display the real cluster size now, which results
in the cluster size not being filtered out any more.
If the cluster size is specified explicitly in CLUSTER_SIZE, keep the output,
and if using the default, filter it out. This mostly restores the old behaviour
of the test cases; test 015 must be fixed to use CLUSTER_SIZE instead of using
extra_img_options for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
QED now supports the truncate (aka resize) operation for growing images.
Update test 025 so it runs for QED.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
rbd implements bdrv_truncate, so test 025 will work.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
016 writes past EOF which isn't support by most protocols, so limit
it to file and sheepdog, which explicitly support it.
Pointed out by Josh Durgin <josh.durgin@dreamhost.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The io_pattern style functions have the following loop:
for i in `seq 1 $count`; do
echo ... $(( start + i * step )) ...
done
Offsets are 1-based so start=1024, step=512, count=4 yields:
1536, 2048, 2560, 3072
Normally we expect:
1024, 1536, 2048, 2560
Most tests ignore this detail, which means that they perform I/O to a
slightly different range than expected by the test author.
Later on things got less innocent and tests started trying to compensate
for the 1-based indexing. This included negative start values in test
024 and my own attempt with count-1 in test 028!
The end result is that tests that use io_pattern are hard to reason
about and don't work the way you'd expect. It's time to clean this mess
up.
This patch switches io_pattern to 0-based offsets. This requires
adjusting the golden outputs since I/O ranges are now shifted and output
differs.
Verifying these output diffs is easy, however. Each diff hunk moves one
I/O from beyond the end of the pattern range to the beginning.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch introduces tests for protocols other than file, and
initially supports rbd and sheepdog.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Test 019 can be run with qcow2 and qed image formats. Replace the
specific image format value with "IMGFMT" so the golden output does not
hardcode qcow2 or qed.
This patch also includes a typo fix for "occurrences".
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The error message for leaked clusters has changed. qemu-iotests needs to be
updated to pass 026 again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Some image formats support backing images that are smaller than the
image file. This patch adds a test that verifies that reads and writes
beyond the end of backing image work.
Unallocated reads beyond the end of the backing file should produce
zeroes.
Writes beyond the end of the backing file should copy-on-write using
zeroes.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Image formats that grow the image file on demand and are organized into
clusters must handle sub-cluster allocating writes. Such writes touch
a portion of a previously unallocated data cluster. After the image
file is grown with the written data, reads of that cluster should work
as expected:
1. Sectors before the written region are zero.
2. The written region is present and the data is uncorrupted.
3. Sectors after the written region are zero.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Additionally to testing the qemu-img convert -B option, also test
-o backing_file.
Also, the old test acidentlly used a pattern of zeros for most of the writes,
so that the allocation test didn't really work out. This is fixed by using an
explicit pattern.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
I got a bug report with test output diffs like this:
-4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+4 KiB, 1 ops; 0.0000 sec (inf EiB/sec and inf ops/sec)
This patch extends the regular expression to consider terabytes, petabytes and
exabytes, and to allow inf as value for the throughput.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The old test didn't consider cases in which the COW files contains some
unallocated clusters and after them allocated ones again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds an image resize grow test to ensure that existing data
is not lost during grow and new space is zeroed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The tests use bash language features like 'let', which aren't supported
by /bin/sh on systems that use a conservative shell like dash. This
patch changes the interpreter to /bin/bash.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This patch adds test case 023 which tests some more cluster sizes. For
anythinger larger than 4k clusters we can't use requests that are l2_size or
more (128k for 1k clusters, 2 MB for 4k clusters, 512 MB for 64k clusters).
Therefore one of the common.pattern cases is changed and needs new expected
results for some old test cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Change the offsets for test requests according to CLUSTER_SIZE.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Change the io_test and io_test2 functions to take the cluster size of the image
and the number of test requests to issue. Tests are changed to specify a
cluster size (usually 4k), but expected test results stay the same for now
(apart from qemu-img printing the cluster size now).
Based on a patch written by Christoph Hellwig.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
VDI supports an image option 'static'.
Ignore "static=off" from qemu-img output.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We need to be able to pass "write -b" as an operation to the pattern testing
functions. Unfortunately, this contains a space character...
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Blue Swirl notices that we were using the old FSF post address in the
license boilerplates. Replace both the old and new address with links
to the gnu.org licenses homepage as suggested by Ben Pfaff.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The write pattern value 0axb is invalid and evaluates to 0,
so the read check (which uses a correct value of 0xab) will fail.
This failure will only be detected with a separate patch for
qemu-io. Without it, qemu-io cannot interpret hex values
and always uses a pattern value of 0.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pretend that a non-implemented check is always successful and thus allow
various tests that were qcow2-specific before to be generic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
015: Combined test to grow the refcount table and test snapshots.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
