virtio-balloon-ccw is already tested in the device-plug-test,
virtio-blk-ccw is already tested in cdrom-test, and virtio-net-ccw
is already tested in the pxe-test, so there is not much point
in doing "nop" tests here again.
Message-Id: <20230512124033.502654-15-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's possible to disable virtio-scsi and virtio-blk in the binaries,
so we must not run the corresponding tests if these devices are missing.
Message-Id: <20230512124033.502654-14-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test is already fenced with CONFIG_USB_UHCI in meson.build, but in
case we build the ppc or mips targets in parallel, this config switch
is still set in "config_all_devices" and thus the test is still run.
Thus we need an explicit additional check here before adding the tests
to the test plan.
Message-Id: <20230512124033.502654-13-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The USB controllers might not be available in the QEMU binary
(e.g. when using the "--without-default-devices" configure switch),
so we have to check whether the devices can be used before running
the related test.
Message-Id: <20230512124033.502654-12-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c,
set up bios-tables-test-allowed-diff.h to ignore the
imminent changes to the APIC tables, per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Message-Id: <20230517162545.2191-2-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
This commit enables each CXL Type-3 device to contain one volatile
memory region and one persistent region.
Two new properties have been added to cxl-type3 device initialization:
[volatile-memdev] and [persistent-memdev]
The existing [memdev] property has been deprecated and will default the
memory region to a persistent memory region (although a user may assign
the region to a ram or file backed region). It cannot be used in
combination with the new [persistent-memdev] property.
Partitioning volatile memory from persistent memory is not yet supported.
Volatile memory is mapped at DPA(0x0), while Persistent memory is mapped
at DPA(vmem->size), per CXL Spec 8.2.9.8.2.0 - Get Partition Info.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Defines are starting to exceed line length limits, align them for
cleanliness before making modifications.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230421160827.2227-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Free allocated directory entries in v9fs_rreaddir() if argument
`entries` was passed as NULL, to avoid a memory leak. It is
explicitly allowed by design for `entries` to be NULL. [1]
[1] https://lore.kernel.org/all/1690923.g4PEXVpXuU@silver
Reported-by: Coverity (CID 1487558)
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1psh5T-0002XN-1C@lizzy.crudebyte.com>
Bios bits avocado tests need mformat (provided by the mtools package) and
xorriso tools in order to run within gitlab CI containers. Add those
dependencies within the Dockerfiles so that containers can be built with
those tools present and bios bits avocado tests can be run there.
xorriso package conflicts with genisoimage package on some distributions.
Therefore, it is not possible to have both the packages at the same time
in the container image uniformly for all distribution flavors. Further,
on some distributions like RHEL, both xorriso and genisoimage
packages provide /usr/bin/genisoimage and on some other distributions like
Fedora, only genisoimage package provides the same utility.
Therefore, this change removes the dependency on geninsoimage for building
container images altogether keeping only xorriso package. At the same time,
cdrom-test.c is updated to use and check for existence of only xorrisofs.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230504154611.85854-3-anisinha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qmp_discard_response method simply ignores the result of the QMP
command, merely unref'ing the object. This is a bad idea for tests
as it leaves no trace if the QMP command unexpectedly failed. The
qtest_qmp_assert_success method will validate that the QMP command
returned without error, and if errors occur, it will print a message
on the console aiding debugging.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230421171411.566300-2-berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We can have failure with the inet type test because the port address
is not allocated atomically and can be taken by another test between its
selection and the start of QEMU. To avoid that, use an unix socket with
a path that is unique
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230503094109.1198248-1-lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On a build configured with: --disable-tcg --enable-xen it is possible
to produce a QEMU binary with no TCG nor KVM support. Skip the cdrom
boot tests if that's the case.
Fixes: 0c1ae3ff9d ("tests/qtest: Fix tests when no KVM or TCG are present")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230508181611.2621-4-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add postcopy tests with compress enabled to ensure nothing breaks
with the refactoring in the next commits.
preempt+compress is blocked, so no test needed for that case.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There has never been tests for migration with compress enabled.
Add suitable tests, testing with compress-wait-thread = false
too.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* Support building Arm targets with CONFIG_TCG=no (ie KVM only)
* hw/net: npcm7xx_emc: set MAC in register space
* hw/arm/bcm2835_property: Implement "get command line" message
* Deprecate the '-singlestep' command line option in favour of
'-one-insn-per-tb' and '-accel one-insn-per-tb=on'
* Deprecate 'singlestep' member of QMP StatusInfo struct
* docs/about/deprecated.rst: Add "since 7.1" tag to dtb-kaslr-seed deprecation
* hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()
* raspi, aspeed: Write bootloader code correctly on big-endian hosts
* hw/intc/allwinner-a10-pic: Fix bug on big-endian hosts
* Fix bug in A32 ERET on big-endian hosts that caused guest crash
* hw/sd/allwinner-sdhost: Correctly byteswap descriptor fields
* hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fields
-----BEGIN PGP SIGNATURE-----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=ua3Q
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230502-2' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* Support building Arm targets with CONFIG_TCG=no (ie KVM only)
* hw/net: npcm7xx_emc: set MAC in register space
* hw/arm/bcm2835_property: Implement "get command line" message
* Deprecate the '-singlestep' command line option in favour of
'-one-insn-per-tb' and '-accel one-insn-per-tb=on'
* Deprecate 'singlestep' member of QMP StatusInfo struct
* docs/about/deprecated.rst: Add "since 7.1" tag to dtb-kaslr-seed deprecation
* hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()
* raspi, aspeed: Write bootloader code correctly on big-endian hosts
* hw/intc/allwinner-a10-pic: Fix bug on big-endian hosts
* Fix bug in A32 ERET on big-endian hosts that caused guest crash
* hw/sd/allwinner-sdhost: Correctly byteswap descriptor fields
* hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fields
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmRRIqoZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3uHxEACkO5NYXhah9KnztwhEjAUH
# CnM6N9IHa4iEF7doWuiS39ZP4bXxCHnX4A1GqGRhsoub5PeiXxucTXlvkwWpOfct
# pX78wHW18pVNJ2jlaly0c9cEI71ojT4zbXC3kjD9f/qHx2qI3rs3Sgb6BYC8QNnx
# P/EHeefrnjwgGhBvzAJ8ATO/jpMYXukuxzjbIP0/7lqB5UxcNxv5rMTTansMO46r
# JN5NdOEM8M8DoJHrHR9K3+Y2Vr1XjOowDPSF8+4rRkJB2v/3415V9bInEsTAvhQu
# Ftua72vjVhTRfvgLXPc9C9S5sx6KHi+NdHfl/D7eL8B4aGHtBaUXv7pJrXUZYyLy
# XNztXUx5EuzxXVN2mg8PYyasnEGjNbTUckAD40iow+DSgemB+MVJRp8f7Rb2yRHh
# YuajDs77NUb9rVzozM+TTJkHfgLDkWCqX2Jm2kAea/gwowzdFCVosAs0cI+cDiBb
# xQUMpERGBE2QJk/+KKc5xmIHUnXZCFTC/ieY2mpr8G6upDspzP254EjNGUCgIZmW
# gYI/UTSX+f7M/+fYRgtSCdJ4LYkqdxUuGfyKccc4S2F2cCuQDGURRp4jHuI1cLyt
# lkrgD1Hj3d9d8ZiMwmXDtiEsJhxDmuVmikmviigfhjLZ0QBd7FdpNz7gQR3lfDwl
# YEGeFrhW2MHutjWSwxQWwQ==
# =ua3Q
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 May 2023 03:48:10 PM BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20230502-2' of https://git.linaro.org/people/pmaydell/qemu-arm: (34 commits)
hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fields
hw/sd/allwinner-sdhost: Correctly byteswap descriptor fields
target/arm: Add compile time asserts to load/store_cpu_field macros
target/arm: Define and use new load_cpu_field_low32()
hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()
hw/arm/raspi: Use arm_write_bootloader() to write boot code
hw/arm/aspeed: Use arm_write_bootloader() to write the bootloader
hw/arm/boot: Make write_bootloader() public as arm_write_bootloader()
hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()
docs/about/deprecated.rst: Add "since 7.1" tag to dtb-kaslr-seed deprecation
qmp: Deprecate 'singlestep' member of StatusInfo
qapi/run-state.json: Fix missing newline at end of file
hmp: Add 'one-insn-per-tb' command equivalent to 'singlestep'
accel/tcg: Report one-insn-per-tb in 'info jit', not 'info status'
Document that -singlestep command line option is deprecated
bsd-user: Add '-one-insn-per-tb' option equivalent to '-singlestep'
linux-user: Add '-one-insn-per-tb' option equivalent to '-singlestep'
accel/tcg: Use one_insn_per_tb global instead of old singlestep global
softmmu: Don't use 'singlestep' global in QMP and HMP commands
make one-insn-per-tb an accel option
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'singlestep' HMP command is confusing, because it doesn't
actually have anything to do with single-stepping the CPU. What it
does do is force TCG emulation to put one guest instruction in each
TB, which can be useful in some situations.
Create a new HMP command 'one-insn-per-tb', so we can document that
'singlestep' is just a deprecated synonym for it, and eventually
perhaps drop it.
We aren't obliged to do deprecate-and-drop for HMP commands,
but it's easy enough to do so, so we do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-9-peter.maydell@linaro.org
The test set -accel tcg, so restrict it to when TCG is present.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-13-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is possible to have a build with both TCG and KVM disabled due to
Xen requiring the i386 and x86_64 binaries to be present in an aarch64
host.
If we build with --disable-tcg on the aarch64 host, we will end-up
with a QEMU binary (x86) that does not support TCG nor KVM.
Skip tests that crash or hang in the above scenario. Do not include
any test cases if TCG and KVM are missing.
Make sure that calls to qtest_has_accel are placed after g_test_init
in similar fashion to commit ae4b01b349 ("tests: Ensure TAP version is
printed before other messages") to avoid TAP parsing errors.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230426180013.14814-9-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're about to move the 32-bit CPUs under CONFIG_TCG, so adjust the
query-cpu-model-expansion test to check against the cortex-a7, which
is already under CONFIG_TCG. That allows the next patch to contain
only code movement. (All the test cares about is that the CPU type
it's checking is one which definitely doesn't work under KVM.)
While here add comments clarifying what we're testing.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230426180013.14814-7-farosas@suse.de
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The test set -accel tcg, so restrict it to when TCG is present.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230426180013.14814-13-farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The spice test is currently hanging on FreeBSD. It likely was
never working before, since in the past, our configure script
was failing to detect this feature due to a bug in the spice
package there (it just got enabled recently by the commit
https://cgit.freebsd.org/ports/commit/?id=cf16b1c9063351325f0 ).
To get the CI working again, let's disable the failing test for
now until someone has enough spare time to debug and fix the real
underlying problem.
Message-Id: <20230428151351.1365822-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
chr_read() is printing an error message and returning with s->data_mutex taken.
This can potentially cause a hang. Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230427125423.103536-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-4-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().
Fix a locality parameter in a test case on the way.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230331173051.3857801-3-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-2-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230412142001.16501-3-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Coverity complains that memset() writes over a const field. Use
an initializer instead, so that the const field is left to zero.
Tests that have to write the const field already use an initializer
for the whole struct, here I am choosing the smallest possible
patch (which is not that small already).
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TAP protocol version line must be the first thing printed on
stdout. The migration test failed that requirement in certain
scenarios:
# Skipping test: Userfault not available (builtdtime)
TAP version 13
# random seed: R02Sc120c807f11053eb90bfea845ba1e368
1..32
# Start of x86_64 tests
# Start of migration tests
....
The TAP version is printed by g_test_init(), so we need to make
sure that any methods which print are run after that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317170553.592707-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Allow to build & use the DBus display without 3d/GPU acceleration support.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that qtest_qmp_add_client() works on win32, we can enable the VNC
test.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230306122751.2355515-11-marcandre.lureau@redhat.com>
Use the "get-win32-socket" function to pass an opened socket to QEMU,
instead of using "getfd", which relies on socket ancillary FD message
passing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230306122751.2355515-10-marcandre.lureau@redhat.com>
Use a close() wrapper instead, so that we don't need to worry about
closesocket() vs close() anymore, let's hope.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20230221124802.4103554-17-marcandre.lureau@redhat.com>
Thomas found an autoconverge test failure where the
migration completed before the autoconverge had kicked in.
To try and avoid this again:
a) Reduce the usleep in test_migrate_auto_converge
so that it should exit quicker when autoconverge kicks in
b) Make the loop exit immediately rather than have the sleep
when it does start autoconverge, otherwise the autoconverge
might succeed during the sleep.
c) Reduce inc_pct so auto converge happens more slowly
d) Reduce the max-bandwidth in migrate_ensure_non_converge
to make the ensure more ensure.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20230306152612.52291-1-dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
=e1yv
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
# j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
# oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
# tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
# gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
# wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
# =e1yv
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Mar 2023 14:46:14 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (72 commits)
virtio: fix reachable assertion due to stale value of cached region size
hw/virtio/vhost-user: avoid using unitialized errp
hw/pxb-cxl: Support passthrough HDM Decoders unless overridden
hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpers
hw/mem/cxl_type3: Add CXL RAS Error Injection Support.
hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use.
hw/cxl: Fix endian issues in CXL RAS capability defaults / masks
hw/mem/cxl-type3: Add AER extended capability
hw/pci-bridge/cxl_root_port: Wire up MSI
hw/pci-bridge/cxl_root_port: Wire up AER
hw/pci/aer: Add missing routing for AER errors
hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register
pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callback
pcihp: move fields enabling hotplug into AcpiPciHpState
acpi: pci: move out ACPI PCI hotplug generator from generic slot generator build_append_pci_bus_devices()
acpi: pci: move BSEL into build_append_pcihp_slots()
acpi: pci: drop BSEL usage when deciding that device isn't hotpluggable
pci: move acpi-index uniqueness check to generic PCI device code
tests: acpi: update expected blobs
tests: acpi: add non zero function device with acpi-index on non-hotpluggble bus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change is derived from qtest for e1000e device.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Jason: make qtest work for win32 (only hotplug)]
Signed-off-by: Jason Wang <jasowang@redhat.com>
They will be useful for igb testing.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
e1000e understands ethernet header so fabricate something convincing.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We've got some sample config files in docs/config/ but no means
of regression checking them. Thus let's test them in our readconfig
qtest, starting with ich9-ehci-uhci.cfg. Note: To enable the test
to read the config files from the build folder, we have to install
a symlink for docs/config in the build directory.
Message-Id: <20230228211533.201837-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test_object_rng_resp() can be reworked quite easily to allow
testing for arbitrary objects in the qom-list response.
Message-Id: <20230228211533.201837-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
