The command for live block commit is added, which has the following
arguments:
device: the block device to perform the commit on (mandatory)
base: the base image to commit into; optional (if not specified,
it is the underlying original image)
top: the top image of the commit - all data from inside top down
to base will be committed into base (mandatory for now; see
note, below)
speed: maximum speed, in bytes/sec
Note: Eventually this command will support merging down the active layer,
but that code is not yet complete. If the active layer is passed
in as top, then an error will be returned. Once merging down the
active layer is supported, the 'top' argument may become optional,
and default to the active layer.
The is done as a block job, so upon completion a BLOCK_JOB_COMPLETED will
be emitted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, after a live snapshot of a drive, the image that has
been 'demoted' to be below the new active layer remains r/w.
This patch reopens it read-only.
Note that we do not check for error on the reopen(), because we
will not abort the snapshots if the reopen fails.
This patch depends on the bdrv_reopen() series.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If readonly=on is given at device creation time, the ->readonly flag
needs to be set in the block driver state for this device so that
readonly-ness is preserved across media changes (qmp change command).
Similarly, to preserve the snapshot property requires ->open_flags to
be correct.
Signed-off-by: Kevin Shanahan <kmshanah@disenchant.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now all major device models (IDE, SCSI, virtio) can choose between
writethrough and writeback at run-time, and virtio will even revert
to writethrough if the guest is not capable of sending flushes. So
we can change the default to writeback at last.
Tested, for lack of a better idea, with a breakpoint on bdrv_open
and all cache choices one by one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All current users (IDE, SCSI and virtio-blk) happen to share this 20
characters limit. Still, it should be left to device models. They
already enforce their limits. They have to, as the DriveInfo limit
only affects legacy -drive serial=..., not the qdev properties.
usb-storage, which doesn't limit serial number length, also uses
DriveInfo for -usbdevice. But that doesn't provide access to
DriveInfo serial.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two producers of these hints: drive_init() on behalf of
-drive, and hd_geometry_guess().
The only consumer of the hint is hd_geometry_guess().
The callers of hd_geometry_guess() call it only when drive_init()
didn't set the hints. Therefore, drive_init()'s hints are never used.
Thus, hd_geometry_guess() only ever sees hints it produced itself in a
prior call. Only the first call computes something, subsequent calls
just repeat the first call's results. However, hd_geometry_guess() is
never called more than once: the device models don't, and the block
device is destroyed on unplug. Thus, dropping the repeat feature
doesn't break anything now.
If a block device wasn't destroyed on unplug and could be reused with
a new device, then repeating old results would be wrong. Thus,
dropping the repeat feature prevents future breakage.
This renders the hints unused. Purge them from the block layer.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation of purging it from the block layer, which will happen
later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the image is read-only then it's not possible to copy read data into
it. Therefore copy-on-read is automatically disabled for read-only
images.
Up until now this behavior was silent, add a warning so the user knows
why copy-on-read is not working.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit converts qemu_opts_create() from qerror_report() to
error_set().
Currently, most calls to qemu_opts_create() can't fail, so most
callers don't need any changes.
The two cases where code checks for qemu_opts_create() erros are:
1. Initialization code in vl.c. All of them print their own
error messages directly to stderr, no need to pass the Error
object
2. The functions opts_parse(), qemu_opts_from_qdict() and
qemu_chr_parse_compat() make use of the error information and
they can be called from HMP or QMP. In this case, to allow for
incremental conversion, we propagate the error up using
qerror_report_err(), which keeps the QError semantics
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed. Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are at least two different errors that can occur in
block_job_set_speed(): the job might not support setting speeds or the
value might be invalid.
Use the Error mechanism to report the error where it occurs.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The block job API uses -errno return values internally and we convert
these to Error in the QMP functions. This is ugly because the Error
should be created at the point where we still have all the relevant
information. More importantly, it is hard to add new error cases to
this case since we quickly run out of -errno values without losing
information.
Go ahead and use Error directly and don't convert later.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Open images with BDRV_O_INCOMING in order to inform block drivers
that an incoming live migration is coming.
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We do not want jobs to keep a device busy for a possibly very long
time, and management could become confused because they thought a
device was not even there anymore. So, cancel long-running jobs
as soon as their device is going to disappear.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
strncpy may not null-terminate the destination string.
Cc: kwolf@redhat.com
Signed-off-by: Floris Bos <dev@noc-ps.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Simplify the blockdev-snapshot-sync code and gain failsafe operation
by turning it into a wrapper around the new transaction command. A new
option is also added matching "mode".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mode field lets a management application create the snapshot
destination outside QEMU.
Right now, the only modes are "existing" and "absolute-paths". Mirroring
introduces "no-backing-file". In the future "relative-paths" could be
implemented too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will add other kinds of operation. Prepare for this by adjusting
the schema.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Monitor operations that manipulate image files must not execute while a
background job (like image streaming) is in progress. This prevents
corruptions from happening when two pieces of code are manipulating the
image file without knowledge of each other.
The monitor "commit" command raises QERR_DEVICE_IN_USE when
bdrv_commit() returns -EBUSY but "commit all" has no error handling.
This is easy to fix, although note that we do not deliver a detailed
error about which device was busy in the "commit all" case.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is a QAPI/QMP only command to take a snapshot of a group of
devices. This is similar to the blockdev-snapshot-sync command, except
blockdev-group-snapshot-sync accepts a list devices, filenames, and
formats.
It is attempted to keep the snapshot of the group atomic; if the
creation or open of any of the new snapshots fails, then all of
the new snapshots are abandoned, and the name of the snapshot image
that failed is returned. The failure case should not interrupt
any operations.
Rather than use bdrv_close() along with a subsequent bdrv_open() to
perform the pivot, the original image is never closed and the new
image is placed 'in front' of the original image via manipulation
of the BlockDriverState fields. Thus, once the new snapshot image
has been successfully created, there are no more failure points
before pivoting to the new snapshot.
This allows the group of disks to remain consistent with each other,
even across snapshot failures.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for streaming data from an intermediate section of the
image chain (see patch and documentation for details).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unplugging a storage interface like virtio-blk causes the host block
device to be deleted too. Long-running operations like block migration
must take a DriveInfo reference to prevent the BlockDriverState from
being freed. For image streaming we can do the same thing.
Note that it is not possible to acquire/release the drive reference in
block.c where the block job functions live because
drive_get_ref()/drive_put_ref() are blockdev.c functions. Calling them
from block.c would be a layering violation - tools like qemu-img don't
even link against blockdev.c.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add query-block-jobs, which shows the progress of ongoing block device
operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add block_job_set_speed, which sets the maximum speed for a background
block operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the block_stream command, which starts copy backing file contents
into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes. Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Long-running block operations like block migration and image streaming
must have continual access to their block device. It is not safe to
perform operations like hotplug, eject, change, resize, commit, or
external snapshot while a long-running operation is in progress.
This patch adds the missing bdrv_in_use() checks so that block migration
and image streaming never have the rug pulled out from underneath them.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let's report specific errors so that management tools and users can
identify the problem.
Two new qerrors are needed:
* QERR_DEVICE_HAS_NO_MEDIUM for ENOMEDIUM
* QERR_DEVICE_IS_READ_ONLY for EACCES
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Also drops the leftover 'mon' argument.
This is a preparation for the next commits which will port the
eject and change commands to the QAPI.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Unfortunately, this conversion required an additional change.
In the old QMP command, the 'snapshot-file' argument is specified as
optional. The idea is to take the snapshot internally if 'snapshot-file'
is not passed. However, internal snapshots are not supported yet so
the command returns a MissingParamater error if 'snapshot-file' is not
passed. Which makes the argument actually required and will cause
compatibility breakage if we change that in the future.
To fix this the QAPI converted blockdev_snapshot_sync command makes the
'snapshot-file' argument required. Again, in practice it's actually required,
so this is not incompatible.
If we do implement internal snapshots someday, we'll need a new argument
for it.
Note that this discussion doesn't affect HMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the -drive copy-on-read=on|off command-line option:
copy-on-read=on|off
copy-on-read is "on" or "off" and enables whether to copy read backing
file sectors into the image file. Copy-on-read avoids accessing the
same backing file sectors repeatedly and is useful when the backing
file is over a slow network. By default copy-on-read is off.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recent versions of udev always keep the tray locked so that the kernel
can observe "eject request" events (aka tray button presses) even on
discs that aren't mounted. Add support for these events in the ATAPI
and SCSI cd drive device models.
To let management cope with the behavior of udev, an event should also
be added for "tray opened/closed". This way, after issuing an "eject"
command, management can poll until the guests actually reacts to the
command. They can then issue the "change" command after the tray has been
opened, or try with "eject -f" after a (configurable?) timeout. However,
with this patch and the corresponding support in the device models,
at least it is possible to do a manual two-step eject+change sequence.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
change fails while the tray is locked by the guest. eject -f forces
it open and removes any media. Unfortunately, the tray closes again
instantly. Since the lock remains as it is, there is no way to insert
another medium unless the guest voluntarily unlocks.
Fix by leaving the tray open after monitor eject.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's a confused mess (see previous commit). No users remain.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriverState member removable is a confused mess. It is true when
an ide-cd, scsi-cd or floppy qdev is attached, or when the
BlockDriverState was created with -drive if={floppy,sd} or -drive
if={ide,scsi,xen,none},media=cdrom ("created removable"), except when
an ide-hd, scsi-hd, scsi-generic or virtio-blk qdev is attached.
Three users remain:
1. eject_device(), via bdrv_is_removable() uses it to determine
whether a block device can eject media.
2. bdrv_info() is monitor command "info block". QMP documentation
says "true if the device is removable, false otherwise". From the
monitor user's point of view, the only sensible interpretation of
"is removable" is "can eject media with monitor commands eject and
change".
A block device can eject media unless a device is attached that
doesn't support it. Switch the two users over to new
bdrv_dev_has_removable_media() that returns exactly that.
3. bdrv_getlength() uses to suppress its length cache when media can
change (see commit 46a4e4e6). Media change is either monitor
command change (updates the length cache), monitor command eject
(doesn't update the length cache, easily fixable), or physical
media change (invalidates length cache, not so easily fixable).
I'm refraining from improving anything here, because this series is
long enough already. Instead, I simply switch it over to
bdrv_dev_has_removable_media() as well.
This changes the behavior of the length cache and of monitor commands
eject and change in two cases:
a. drive not created removable, no device attached
The commit makes the drive removable, and defeats the length cache.
Example: -drive if=none
b. drive created removable, but the attached drive is non-removable,
and doesn't call bdrv_set_removable(..., 0) (most devices don't)
The commit makes the drive non-removable, and enables the length
cache.
Example: -drive if=xen,media=cdrom -M xenpv
The other non-removable devices that don't call
bdrv_set_removable() can't currently use a drive created removable,
either because they aren't qdevified, or because they lack a drive
property. Won't stay that way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Requires new BlockDevOps member is_medium_locked(). Implement for IDE
and SCSI CD-ROMs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now, this just protects against programming errors like having the
same drive back multiple non-qdev devices, or untimely bdrv_delete().
Later commits will add other interesting uses.
While there, rename BlockDriverState member peer to dev, bdrv_attach()
to bdrv_attach_dev(), bdrv_detach() to bdrv_detach_dev(), and
bdrv_get_attached() to bdrv_get_attached_dev().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch introduces bdrv_parse_cache_flags() which sets open flags
given a cache mode. Previously this was duplicated in blockdev.c and
qemu-img.c.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ejecting hard disk platters can only end in tears.
If you need to revoke access to an image, use drive_del, not eject -f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add QMP bits for snapshot_blkdev command. This is the same as
snapshot_blkdev in the human monitor. The command is synchronous.
In the future async commands and or a break down of the functionality
into multiple commands might be added.
Also change the 'snapshot_file' argument to 'snapshot-file' in
the human monitor, so that it matches QMP.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
The current message doesn't clearly communicate the error cause.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change BDRV_O_NOCACHE to only imply bypassing the host OS file cache,
but no writeback semantics. All existing callers are changed to also
specify BDRV_O_CACHE_WB to give them writeback semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No users of bdrv_get_type_hint() left. bdrv_set_type_hint() can make
the media removable by side effect. Make that explicit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device. Unlike
DriveInfo, BlockDriverState should be about the host part only.
One of the remaining guest bits there is the "type hint". -drive
option media sets it, and qdevs "ide-drive", "scsi-disk" and non-qdev
IF_XEN devices check it to pick HD vs. CD.
Communicate -drive option media via new DriveInfo member media_cd
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When removing a drive from the host-side via drive_del we currently have
the following path:
drive_del
qemu_aio_flush()
bdrv_close() // zaps bs->drv, which makes any subsequent I/O get
// dropped. Works as designed
drive_uninit()
bdrv_delete() // frees the bs. Since the device is still connected to
// bs, any subsequent I/O is a use-after-free.
The value of bs->drv becomes unpredictable on free. As long as it
remains null, I/O still gets dropped, however it could become non-null
at any point after the free resulting SEGVs or other QEMU state
corruption.
To resolve this issue as simply as possible, we can chose to not
actually delete the BlockDriverState pointer. Since bdrv_close()
handles setting the drv pointer to NULL, we just need to remove the
BlockDriverState from the QLIST that is used to enumerate the block
devices. This is currently handled within bdrv_delete, so move this
into its own function, bdrv_make_anon().
The result is that we can now invoke drive_del, this closes the file
descriptors and sets BlockDriverState->drv to NULL which prevents futher
IO to the device, and since we do not free BlockDriverState, we don't
have to worry about the copy retained in the block devices.
We also don't attempt to remove the qdev property since we are no longer
deleting the BlockDriverState on drives with associated drives. This
also allows for removing Drives with no devices associated either.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have two different virtio buses: pci and s390. The abstraction path
taken in qemu is to have generic aliases for each device type in the
architecture specific qdev devices.
So let's make use of these aliases whenever we can and define them
whenever we can.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case we cannot open the newly created snapshot image, try to fall
back to the original image file and continue running on that, which
should prevent the guest from aborting.
This is a corner case which can happen if the admin by mistake
specifies the snapshot file on a virtual file system which does not
support O_DIRECT. bdrv_create() does not use O_DIRECT, but the
following open in bdrv_open() does and will then fail.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set block device in use during block migration, disallow drive_del and
bdrv_truncate for in use devices.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The host part of a block device can be deleted with in progress
block migration.
To fix this, add a reference count to DriveInfo, freeing resources
on last reference.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Watch this:
(qemu) drive_add 0 if=none
(qemu) info block
none0: type=hd removable=0 [not inserted]
(qemu) drive_del none0
Segmentation fault (core dumped)
add_init_drive() is confused about drive_init()'s failure modes, and
cleans up when it shouldn't. This leaves the DriveInfo with member
opts dangling. drive_del attempts to free it, and dies.
drive_init() behaves as follows:
* If it created a drive with media, it returns its DriveInfo.
* If it created a drive without media, it clears *fatal_error and
returns NULL.
* If it couldn't create a drive, it sets *fatal_error and returns
NULL.
Of its three callers:
* drive_init_func() is correct.
* usb_msd_init() assumes drive_init() failed when it returns NULL.
This is correct only because it always passes option "file", and
"drive without media" can't happen then.
* add_init_drive() assumes drive_init() failed when it returns NULL.
This is incorrect.
Clean up drive_init() to return NULL on failure and only on failure.
Drop its parameter fatal_error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let the callers build the optstr. Only one wants to. All the others
become simpler, because they don't have to worry about escaping '%'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We silently ignore multiple definitions for the same drive:
$ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=ide,index=1,file=tmp.qcow2 -drive if=ide,index=1,file=nonexistant
QEMU 0.13.50 monitor - type 'help' for more information
(qemu) info block
ide0-hd1: type=hd removable=0 file=tmp.qcow2 backing_file=tmp.img ro=0 drv=qcow2 encrypted=0
With if=none, this can become quite confusing:
$ qemu-system-x86_64 -nodefaults -vnc :1 -S -monitor stdio -drive if=none,index=1,file=tmp.qcow2,id=eins -drive if=none,index=1,file=nonexistant,id=zwei -device ide-drive,drive=eins -device ide-drive,drive=zwei
qemu-system-x86_64: -device ide-drive,drive=zwei: Property 'ide-drive.drive' can't find value 'zwei'
The second -device fails, because it refers to drive zwei, which got
silently ignored.
Make multiple drive definitions fail cleanly.
Unfortunately, there's code that relies on multiple drive definitions
being silently ignored: main() merrily adds default drives even when
the user already defined these drives. Fix that up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before, type & index were hidden in printf-like fmt, ... parameters,
which get expanded into an option string. Rather inconvenient for
uses later in this series.
New IF_DEFAULT to ask for the machine's default interface. Before,
that was done by having no option "if" in the option string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before commit 622b520f, index=12 meant bus=1,unit=5.
Since the commit, it means bus=0,unit=12. The drive is created, but
not the guest device. That's because the controllers we use with
if=scsi drives (lsi53c895a and esp) support only 7 units, and
scsi_bus_legacy_handle_cmdline() ignores drives with unit numbers
exceeding that limit.
Changing the mapping of index to bus, unit is a regression. Breaking
-drive invocations that used to work just makes it worse.
Revert the part of commit 622b520f that causes this, and clean up
some.
Note that the fix only affects if=scsi. You can still put more than 7
units on a SCSI bus with -device & friends.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Turns drive_init()'s lengthy conditional into a concise loop, and
makes the data available elsewhere.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qdev_init_bdrv() doesn't belong into qdev.c; it's about drives, not
qdevs. Rename to drive_get_next, move to blockdev.c, drop the bogus
DeviceState argument, and return DriveInfo instead of
BlockDriverState.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a monitor command that allows resizing of block devices while
qemu is running. It uses the existing bdrv_truncate method already
used by qemu-img to do it's work. Compared to qemu-img the size
parsing is very simplicistic, but I think having a properly numering
object is more useful for non-humand monitor users than having
the units and relative resize parsing.
For SCSI devices the new size can be updated in Linux guests by
doing the following shell command:
echo > /sys/class/scsi_device/0:0:0:0/device/rescan
For ATA devices I don't know of a way to update the block device
size in Linux system, and for virtio-blk the next two patches
will provide an automatic update of the size when this command
is issued on the host.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Watch this:
(qemu) drive_add 0 if=none,file=tmp.img
OK
(qemu) info block
none0: type=hd removable=0 file=tmp.img ro=0 drv=raw encrypted=0
(qemu) drive_del none0
Segmentation fault (core dumped)
do_drive_del()'s code to clean up the pointer from a qdev using the
drive back to the drive needs to check whether such a device exists.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes the errors point to the error location, and fixes drive_add
to report errors in the monitor instead of stderr.
While there, tweak a few error messages for consistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When cyls, heads or secs are out of range, the error message prints
buf, which points to the value of option "if". Bogus, may even be
null. Drop that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Current code does not support snapshot internally to the running
image. Error in case no snapshot_file is specified.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The monitor command is:
snapshot_blkdev <device> [snapshot-file] [format]
Default format is qcow2. For now snapshots without a snapshot-file, eg
internal snapshots, are not supported.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a user decides to punish a guest by revoking its block device via
drive_del, and subsequently also attempts to remove the pci device
backing it, and the device is using blockdev_auto_del() then we get a
segfault when we attempt to access dinfo->auto_del.[1]
The fix is to check if drive_get_by_blockdev() actually returns a valid
dinfo pointer or not.
1. (qemu) pci_add auto storage file=images/test01.raw,if=virtio,id=block1,snapshot=on
(qemu) drive_del block1
(qemu) pci_del 5
*segfault*
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently device hotplug removal code is tied to device removal via
ACPI. All pci devices that are removable via device_del() require the
guest to respond to the request. In some cases the guest may not
respond leaving the device still accessible to the guest. The management
layer doesn't currently have a reliable way to revoke access to host
resource in the presence of an uncooperative guest.
This patch implements a new monitor command, drive_del, which
provides an explicit command to revoke access to a host block device.
drive_del first quiesces the block device (qemu_aio_flush;
bdrv_flush() and bdrv_close()). This prevents further IO from being
submitted against the host device. Finally, drive_del cleans up
pointers between the drive object (host resource) and the device
object (guest resource).
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This implements the rerror option for SCSI disks.
It also includes minor changes to the write path where the same code is used
that was criticized in the review for the changes to the read path required for
rerror support.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Block device change command did not copy BDRV_O_SNAPSHOT flag. Thus
the new image did not have this flag and the file got deleted during
opening.
Fix by copying BDRV_O_SNAPSHOT flag.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit cb4e5f8e, monitor command change makes the new media
readonly iff the type hint is BDRV_TYPE_CDROM, i.e. the drive was
created with media=cdrom. The intention is to avoid changing a block
device's read-only-ness. However, BDRV_TYPE_CDROM is only a hint. It
is currently sufficent for read-only. But it's not necessary, and it
may not remain sufficient.
Use bdrv_is_read_only() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We automatically delete blockdev host parts on unplug of the guest
device. Too much magic, but we can't change that now.
The delete happens early in the guest device teardown, before the
connection to the host part is severed. Thus, the guest part's
pointer to the host part dangles for a brief time. No actual harm
comes from this, but we'll catch such dangling pointers a few commits
down the road. Clean up the dangling pointers by delaying the
automatic deletion until the guest part's pointer is gone.
Device usb-storage deliberately makes two qdev properties refer to the
same drive, because it automatically creates a second device. Again,
too much magic we can't change now. Multiple references worked okay
before, but now free_drive() dies for the second one. Zap the extra
reference.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Historically, user monitor arguments beginning with '-' (eg. '-f')
were passed as integers down to handlers.
I've maintained this behavior in the new monitor because we didn't
have a boolean type at the very beginning of QMP. Today we have it
and this behavior is causing trouble to QMP's argument checker.
This commit fixes the problem by doing the following changes:
1. User Monitor
Before: the optional arg was represented as a QInt, we'd pass 1
down to handlers if the user specified the argument or
0 otherwise
This commit: the optional arg is represented as a QBool, we pass
true down to handlers if the user specified the
argument, otherwise _nothing_ is passed
2. QMP
Before: the client was required to pass the arg as QBool, but we'd
convert it to QInt internally. If the argument wasn't passed,
we'd pass 0 down
This commit: still require a QBool, but doesn't do any conversion and
doesn't pass any default value
3. Convert existing handlers (do_eject()/do_migrate()) to the new way
Before: Both handlers would expect a QInt value, either 0 or 1
This commit: Change the handlers to accept a QBool, they handle the
following cases:
A) true is passed: the option is enabled
B) false is passed: the option is disabled
C) nothing is passed: option not specified, use
default behavior
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This changes the monitor eject_device() function to not check for
bdrv_is_inserted().
Example run where the bug manifests itself:
(output of 'info block' is stripped to include only the CD-ROM device)
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 [not inserted]
(qemu) change ide1-cd0 /dev/cdrom host_cdrom
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0
(qemu) eject ide1-cd0
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0
# at this point, a disk was inserted on the host CD-ROM drive
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 file=/dev/cdrom ro=1 drv=host_cdrom encrypted=0
(qemu) eject ide1-cd0
(qemu) info block
ide1-cd0: type=cdrom removable=1 locked=0 [not inserted]
(qemu)
The first eject command didn't work because the is_inserted() check
failed.
I have no clue why the code had the is_inserted() check, as it doesn't matter
if there is a disk present at the host drive, when the user wants the virtual
device to be disconnected from the host device.
The is_inserted() check has another side effect: a memory leak if the "change"
command is used multiple times, as do_change() calls eject_device() before
re-opening the block device, but bdrv_close() is never called.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the list of drives defined with drive_init(). Hide it, so it
doesn't get abused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
do_commit() and mux_proc_byte() iterate over the list of drives
defined with drive_init(). This misses host block devices defined by
other means. Such means don't exist now, but will be introduced later
in this series.
Change them to use new bdrv_commit_all(), which iterates over all host
block devices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
That's where they belong semantically (block device host part), even
though the actions are actually executed by guest device code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Empty file used to create an empty drive (no media). Since commit
9dfd7c7a, it's an error: "qemu: could not open disk image : No such
file or directory". Older versions of libvirt can choke on this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should use 'dinfo->serial' length, 'serial' is a pointer, so
the serial number length is currently limited to the pointer size.
This fixes https://bugs.launchpad.net/qemu/+bug/584143 and is also
valid for stable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
