The last pull added a ton of useless files by mistake.
Drop them all.
Fixes: 0ed93f4c05 ("update golden master DSDT binary table blobs for q35")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.
Following is a typical diff between the q35 acpi DSDT table blobs:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001DFE (7678)
+ * Length 0x00001DF6 (7670)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xAC
+ * Checksum 0x17
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -3113,24 +3113,20 @@
Name (_ADR, 0x00010000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If you have the chain 'base.qcow2 <- top.qcow2' and want to merge a
bitmap from top into base, qemu-img was failing with:
qemu-img: Could not open 'top.qcow2': Could not open backing file: Failed to get shared "write" lock
Is another process using the image [base.qcow2]?
The easiest fix is to not open the entire backing chain of either
image (source or destination); after all, the point of 'qemu-img
bitmap' is solely to manipulate bitmaps directly within a single qcow2
image, and this is made more precise if we don't pay attention to
other images in the chain that may happen to have a bitmap by the same
name.
However, note that on a case-by-case analysis, there _are_ times where
we treat it as a feature that we can access a bitmap from a backing
layer in association with an overlay BDS. A demonstration of this is
using NBD to expose both an overlay BDS (for constant contents) and a
bitmap (for learning which blocks are interesting) during an
incremental backup:
Base <- Active <- Temporary
\--block job ->/
where Temporary is being fed by a backup 'sync=none' job. When
exposing Temporary over NBD, referring to a bitmap that lives only in
Active is less effort than having to copy a bitmap into Temporary [1].
So the testsuite additions in this patch check both where bitmaps get
allocated (the qemu-img info output), and that qemu-nbd is indeed able
to access a bitmap inherited from the backing chain since it is a
different use case than 'qemu-img bitmap'.
[1] Full disclosure: prior to the recent commit 374eedd1c4 and
friends, we were NOT able to see bitmaps through filters, which meant
that we actually did not have nice clean semantics for uniformly being
able to pick up bitmaps from anywhere in the backing chain (seen as a
change in behavior between qemu 4.1 and 4.2 at commit 00e30f05de, when
block-copy swapped from a one-off to a filter). Which means libvirt
was already coded to copy bitmaps around for the sake of older qemu,
even though modern qemu no longer needs it. Oh well.
Fixes: http://bugzilla.redhat.com/1877209
Reported-by: Eyal Shenitzky <eshenitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200914191009.644842-1-eblake@redhat.com>
[eblake: more commit message tweaks, per Max Reitz review]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
On macOS, (out of the box) readlink does not have -f. We do not really
need readlink here, though, it was just a replacement for realpath
(which is not available on our BSD test systems), which we needed to
make the $(dirname) into an absolute path.
Instead of using either, just use "cd; pwd" like is done for
$source_iotests.
Fixes: b1cbc33a39
("iotests: Allow running from different directory")
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Claudio Fontana <cfontana@suse.de>
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200914145606.94620-1-mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This function preallocates metadata structures and then extends the
image to its new size, but that new size calculation is wrong because
it doesn't take into account that the host_offset variable is always
cluster-aligned.
This problem can be reproduced with preallocation=metadata when the
original size is not cluster-aligned but the new size is. In this case
the final image size will be shorter than expected.
qemu-img create -f qcow2 img.qcow2 31k
qemu-img resize --preallocation=metadata img.qcow2 128k
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <adeb8b059917b141d5f5b3bd2a016262d3052c79.1599833007.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Mark compat=0.10 unsupported for iotest 125]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The test_stream_parallel test still occasionally fails in the CI.
Thus let's disable it during "make check" for now so that it does
not cause trouble during merge tests. We can enable it again once
the problem has been resolved.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200907113824.134788-1-thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When a write request needs to allocate new clusters (or change the L2
bitmap of existing ones) a QCowL2Meta structure is created so the L2
metadata can be later updated and any copy-on-write can be performed
if necessary.
A write request can span a region consisting of an arbitrary
combination of previously unallocated and allocated clusters, and if
the unallocated ones can be put contiguous to the existing ones then
QEMU will do so in order to minimize the number of write operations.
In practice this means that a write request has not just one but a
number of QCowL2Meta structures. All of them are added to the
cluster_allocs list that is stored in BDRVQcow2State and is used to
detect overlapping requests. After the write request finishes all its
associated QCowL2Meta are removed from that list. calculate_l2_meta()
takes care of creating and putting those structures in the list, and
qcow2_handle_l2meta() takes care of removing them.
The problem is that the error path in handle_alloc() also tries to
remove an item in that list, a remnant from the time when this was
handled there (that code would not even be correct anymore because
it only removes one struct and not all the ones from the same write
request).
This can trigger a double removal of the same item from the list,
causing a crash. This is not easy to reproduce in practice because
it requires that do_alloc_cluster_offset() fails after a successful
previous allocation during the same write request, but it can be
reproduced with the included test case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <3440a1c4d53c4fe48312b478c96accb338cbef7c.1599150873.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
in case of large continous areas that share the same allocation status
it happens that the value of s->sector_next_status is unaligned to the
cluster size or even request alignment of the source. Avoid this by
stripping down the s->sector_next_status position to cluster boundaries.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20200901125129.6398-1-pl@kamp.de>
[mreitz: Disable vhdx for 251]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use list comprehension instead of append loop.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200828232152.205833-6-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
FilePath creates now one temporary file:
with FilePath("a") as a:
Or more:
with FilePath("a", "b", "c") as (a, b, c):
This is also the behavior of the file_path() helper, used by some of the
tests. Now we have only 2 helpers for creating temporary files instead
of 3.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200828232152.205833-5-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Accept variable number of names instead of a sequence:
with FilePaths("a", "b", "c") as (a, b, c):
The disadvantage is that base_dir must be used as kwarg:
with FilePaths("a", "b", base_dir=soc_dir) as (sock1, sock2):
But this is more clear and calling optional argument as positional
arguments is bad idea anyway.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200828232152.205833-4-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When this class was extracted from FilePath, the docstring was not
updated for generating multiple files, and the example usage was
referencing unrelated file.
While fixing the docstring, add example for creating sockets, which
should use iotests.sock_dir instead of the default base_dir.
Fixes: de263986b5
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20200828232152.205833-3-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If os.remove() fails to remove one of the paths, for example if the file
was removed by the test, the cleanup loop would exit silently, without
removing the rest of the files.
Fixes: de263986b5
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200828232152.205833-2-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory
-----BEGIN PGP SIGNATURE-----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=gaaW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qemu-img create: Fail gracefully when backing file is an empty string
- Fixes related to filter block nodes ("Deal with filters" series)
- block/nvme: Various cleanups required to use multiple queues
- block/nvme: Use NvmeBar structure from "block/nvme.h"
- file-win32: Fix "locking" option
- iotests: Allow running from different directory
# gpg: Signature made Thu 10 Sep 2020 10:11:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (65 commits)
block/qcow2-cluster: Add missing "fallthrough" annotation
block/nvme: Pair doorbell registers
block/nvme: Use generic NvmeBar structure
block/nvme: Group controller registers in NVMeRegs structure
file-win32: Fix "locking" option
iotests: Allow running from different directory
iotests: Test committing to overridden backing
iotests: Add test for commit in sub directory
iotests: Add filter mirror test cases
iotests: Add filter commit test cases
iotests: Let complete_and_wait() work with commit
iotests: Test that qcow2's data-file is flushed
block: Leave BDS.backing_{file,format} constant
block: Inline bdrv_co_block_status_from_*()
blockdev: Fix active commit choice
block: Drop backing_bs()
qemu-img: Use child access functions
nbd: Use CAF when looking for dirty bitmap
commit: Deal with filters
backup: Deal with filters
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is convenient to be able to edit the tests and run them without
changing the current working directory back and forth. Instead of
assuming that $PWD is the qemu-iotests build directory, derive the build
directory from the executed script.
This allows 'check' to find the required files even when called from
another directory. The scratch directory will still be in the current
working directory.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200902110326.257115-1-kwolf@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Add a test for committing an overlay in a sub directory to one of the
images in its backing chain, using both relative and absolute filenames.
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds some test cases how mirroring relates to filters. One
of them tests what happens when you mirror off a filtered COW node, two
others use the mirror filter node as basically our only example of an
implicitly created filter node so far (besides the commit filter).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
check-block has its own test harness, unlike every other test. If
we capture its output, as is in general nicer to do without V=1,
there will be no sign of progress. So for lack of a better option
just move the invocation of the test back to Makefile rules.
As a side effect, this will also fix "make check" in --disable-tools
builds, as they were trying to run qemu-iotests without having
made qemu-img before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
complete_and_wait() and wait_ready() currently only work for mirror
jobs. Let them work for active commit jobs, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Flushing a qcow2 node must lead to the data-file node being flushed as
well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Parts of the block layer treat BDS.backing_file as if it were whatever
the image header says (i.e., if it is a relative path, it is relative to
the overlay), other parts treat it like a cache for
bs->backing->bs->filename (relative paths are relative to the CWD).
Considering bs->backing->bs->filename exists, let us make it mean the
former.
Among other things, this now allows the user to specify a base when
using qemu-img to commit an image file in a directory that is not the
CWD (assuming, everything uses relative filenames).
Before this patch:
$ ./qemu-img create -f qcow2 foo/bot.qcow2 1M
$ ./qemu-img create -f qcow2 -b bot.qcow2 foo/mid.qcow2
$ ./qemu-img create -f qcow2 -b mid.qcow2 foo/top.qcow2
$ ./qemu-img commit -b mid.qcow2 foo/top.qcow2
qemu-img: Did not find 'mid.qcow2' in the backing chain of 'foo/top.qcow2'
$ ./qemu-img commit -b foo/mid.qcow2 foo/top.qcow2
qemu-img: Did not find 'foo/mid.qcow2' in the backing chain of 'foo/top.qcow2'
$ ./qemu-img commit -b $PWD/foo/mid.qcow2 foo/top.qcow2
qemu-img: Did not find '[...]/foo/mid.qcow2' in the backing chain of 'foo/top.qcow2'
After this patch:
$ ./qemu-img commit -b mid.qcow2 foo/top.qcow2
Image committed.
$ ./qemu-img commit -b foo/mid.qcow2 foo/top.qcow2
qemu-img: Did not find 'foo/mid.qcow2' in the backing chain of 'foo/top.qcow2'
$ ./qemu-img commit -b $PWD/foo/mid.qcow2 foo/top.qcow2
Image committed.
With this change, bdrv_find_backing_image() must look at whether the
user has overridden a BDS's backing file. If so, it can no longer use
bs->backing_file, but must instead compare the given filename against
the backing node's filename directly.
Note that this changes the QAPI output for a node's backing_file. We
had very inconsistent output there (sometimes what the image header
said, sometimes the actual filename of the backing image). This
inconsistent output was effectively useless, so we have to decide one
way or the other. Considering that bs->backing_file usually at runtime
contained the path to the image relative to qemu's CWD (or absolute),
this patch changes QAPI's backing_file to always report the
bs->backing->bs->filename from now on. If you want to receive the image
header information, you have to refer to full-backing-filename.
This necessitates a change to iotest 228. The interesting information
it really wanted is the image header, and it can get that now, but it
has to use full-backing-filename instead of backing_file. Because of
this patch's changes to bs->backing_file's behavior, we also need some
reference output changes.
Along with the changes to bs->backing_file, stop updating
BDS.backing_format in bdrv_backing_attach() as well. This way,
ImageInfo's backing-filename and backing-filename-format fields will
represent what the image header says and nothing else.
iotest 245 changes in behavior: With the backing node no longer
overriding the parent node's backing_file string, you can now omit the
@backing option when reopening a node with neither a default nor a
current backing file even if it used to have a backing node at some
point.
273 also changes: The base image is opened without a format layer, so
ImageInfo.backing-filename-format used to report "file" for the base
image's overlay after blockdev-snapshot. However, the image header
never says "file" anywhere, so it now reports $IMGFMT.
Signed-off-by: Max Reitz <mreitz@redhat.com>
This changes iotest 204's output, because blkdebug on top of a COW node
used to make qemu-img map disregard the rest of the backing chain (the
backing chain was broken by the filter). With this patch, the
allocation in the base image is reported correctly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
query-block, query-named-block-nodes, and query-blockstats now return
any filtered child under "backing", not just bs->backing or COW
children. This is so that filters do not interrupt the reported backing
chain. This changes the output for iotest 184, as the throttled node
now appears as a backing child.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
It is trivial, so we might as well do it.
Remove _filter_actual_image_size from iotest 184, so we get to see the
result in its reference output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Providing an empty string for the backing file parameter like so:
qemu-img create -f qcow2 -b '' /tmp/foo
allows the flow of control to reach and subsequently fail an assert
statement because passing an empty string to
bdrv_get_full_backing_filename_from_filename()
simply results in NULL being returned without an error being raised.
To fix this, let's check for an empty string when getting the value from
the opts list.
Reported-by: Attila Fazekas <afazekas@redhat.com>
Fixes: https://bugzilla.redhat.com/1809553
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20200813134722.802180-1-ckuehl@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The error message has changed recently, breaking the test. Fix it.
Fixes: a2b333c018
("block: nbd: Fix convert qcow2 compressed to nbd")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200811080830.289136-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
As of the patch to flush qemu-img's "Formatting" message before the
error message, 059 has been broken for vmdk. Fix it.
Fixes: 4e2f441878
("qemu-img: Flush stdout before before potential stderr messages")
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200811084150.326377-1-mreitz@redhat.com>
Reviewed-by: Eric blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
With blockdev, a BlockDriverState may not have a device name,
so using a node name is required as an alternative.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200827111606.1408275-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <e6dd0429cafe84ca603179c298a8703bddca2904.1594396418.git.berto@igalia.com>
[mreitz: Use env in shebang line]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function is only used by qcow2_expand_zero_clusters() to
downgrade a qcow2 image to a previous version. This would require
transforming all extended L2 entries into normal L2 entries but this
is not a simple task and there are no plans to implement this at the
moment.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <15e65112b4144381b4d8c0bdf8fb76b0d813e3d1.1594396418.git.berto@igalia.com>
[mreitz: Fixed comment style]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Traditional qcow2 images don't allow preallocation if a backing file
is set. This is because once a cluster is allocated there is no way to
tell that its data should be read from the backing file.
Extended L2 entries have individual allocation bits for each
subcluster, and therefore it is perfectly possible to have an
allocated cluster with all its subclusters unallocated.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6d5b0f38e7dc5f2f31d8cab1cb92044e9909aece.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that the implementation of subclusters is complete we can finally
add the necessary options to create and read images with this feature,
which we call "extended L2 entries".
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6476caaa73216bd05b7bb2d504a20415e1665176.1594396418.git.berto@igalia.com>
[mreitz: %s/5\.1/5.2/; fixed 302's and 303's reference output]
Signed-off-by: Max Reitz <mreitz@redhat.com>
The offset field of an uncompressed cluster's L2 entry must be aligned
to the cluster size, otherwise it is invalid. If the cluster has no
data then it means that the offset points to a preallocation, so we
can clear the offset field without affecting the guest-visible data.
This is what 'qemu-img check' does when run in repair mode.
On traditional qcow2 images this can only happen when QCOW_OFLAG_ZERO
is set, and repairing such entries turns the clusters from ZERO_ALLOC
into ZERO_PLAIN.
Extended L2 entries have no ZERO_ALLOC clusters and no QCOW_OFLAG_ZERO
but the idea is the same: if none of the subclusters are allocated
then we can clear the offset field and leave the bitmap untouched.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <9f4ed1d0a34b0a545b032c31ecd8c14734065342.1594396418.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200820150725.68687-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
[eblake: fold in python cleanups recommended by Vladimir]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let wait_migration() return on failure (with the return value indicating
whether the migration was completed or has failed), so we can use it for
migrations that are expected to fail, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200820150725.68687-3-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Extend the test case #303 by dumping QCOW2 image metadata in JSON
format.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1596742557-320265-12-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
As __dict__ is being extended with class members we do not want to
print, add the to_json() method to classes that returns a json-dumpable
object with desired fields and their values. Extend it in subclass when
necessary to print the final dictionary in the JSON output which
follows.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <1596742557-320265-10-git-send-email-andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add the command key to the qcow2.py arguments list to dump QCOW2
metadata in JSON format. Here is the suggested way to do that. The
implementation of the dump in JSON format is in the patch that follows.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1596742557-320265-9-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The cluster size of an image is the QcowHeader class member and may be
obtained by dependent extension structures such as Qcow2BitmapExt for
further bitmap table details print.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1596742557-320265-7-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce the class BitmapFlags that parses a bitmap flags mask.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1596742557-320265-5-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There are two ways to initialize a class derived from Qcow2Struct:
1. Pass a block of binary data to the constructor.
2. Pass the file descriptor to allow reading the file from constructor.
Let's change the Qcow2BitmapExt initialization method from 1 to 2 to
support a scattered reading in the initialization chain.
The implementation comes with the patch that follows.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1596742557-320265-4-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Let us differ binary data type from string one for the extension data
variable and keep the string as the QcowHeaderExtension class member.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1596742557-320265-3-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The simple script creates a QCOW2 image and fills it with some data.
Two bitmaps are created as well. Then the script reads the image header
with extensions from the disk by running the script qcow2.py and dumps
the information to the output. Other entities, such as snapshots, may
be added to the test later.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1596742557-320265-2-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
