MFHC0 and MTHC0 used to handle EntryLo0 and EntryLo1 registers only,
and placing ELPA flag checks before switch statement were technically
correct. However, after adding handling more registers, these checks
should be moved to act only in cases of handling EntryLo0 and
EntryLo1.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
BadVAddr should not be updated if (env->hflags & MIPS_HFLAG_DM) is
set.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add testing Config1.WR bit into watch exception handling logic.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Add CP0 BadInstrX register. This register will be used in nanoMIPS.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Update CP0 registers Config0, Config1, Config2, Config3,
Config4, and Config5 bit definitions.
Some of these bits will be utilized by upcoming nanoMIPS changes.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Fix two instances of shadow variables. This cleans up entire file
translate.c from shadow variables.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Mark switch fallthroughs with comments, in cases fallthroughs
are intentional.
The comments "/* fall through */" are interpreted by compilers and
other tools, and they will not issue warnings in such cases. For gcc,
the warning is turnend on by -Wimplicit-fallthrough. With this patch,
there will be no such warnings in target/mips directory. If such
warning appears in future, it should be checked if it is intentional,
and, if yes, marked with a comment similar to those from this patch.
The comment must be just before next "case", otherwise gcc won't
understand it.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Remove "range style" case statements to make code analysis easier.
This patch handles cases when the values in the range in question
were not properly defined.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <amarkovic@wavecomp.com>
Remove "range style" case statements to make code analysis easier.
This is needed also for some upcoming nanoMIPS-related refactorings.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Update email addresses of Aleksandar Markovic and Paul Burton in the
MAINTAINERS file. Also, add corresponding items in the .mailmap file.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Enabling TOPOEXT is always allowed, but it can't be enabled
blindly by "-cpu host" because it may make guests crash if the
rest of the cache topology information isn't provided or isn't
consistent.
This addresses the bug reported at:
https://bugzilla.redhat.com/show_bug.cgi?id=1613277
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180809221852.15285-1-ehabkost@redhat.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New CPU models mostly inherit features from ancestor Skylake, while addin new
features: UMIP, New Instructions ( PCONIFIG (server only), WBNOINVD,
AVX512_VBMI2, GFNI, AVX512_VNNI, VPCLMULQDQ, VAES, AVX512_BITALG),
Intel PT and 5-level paging (Server only). As well as
IA32_PRED_CMD, SSBD support for speculative execution
side channel mitigations.
Note:
For 5-level paging, Guest physical address width can be configured, with
parameter "phys-bits". Unless explicitly specified, we still use its default
value, even for Icelake-Server cpu model.
At present, hold on expose IA32_ARCH_CAPABILITIES to guest, as 1) This MSR
actually presents more than 1 'feature', maintainers are considering expanding current
features presentation of only CPUIDs to MSR bits; 2) a reasonable default value
for MSR_IA32_ARCH_CAPABILITIES needs to settled first. These 2 are actully
beyond Icelake CPU model itself but fundamental. So split these work apart
and do it later.
https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00774.htmlhttps://lists.gnu.org/archive/html/qemu-devel/2018-07/msg00796.html
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-6-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
WBNOINVD: Write back and do not invalidate cache, enumerated by
CPUID.(EAX=80000008H, ECX=0):EBX[bit 9].
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-5-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Support of IA32_PRED_CMD MSR already be enumerated by same CPUID bit as
SPEC_CTRL.
At present, mark CPUID_7_0_EDX_ARCH_CAPABILITIES unmigratable, per Paolo's
comment.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-3-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
IA32_PRED_CMD MSR gives software a way to issue commands that affect the state
of indirect branch predictors. Enumerated by CPUID.(EAX=7H,ECX=0):EDX[26].
IA32_ARCH_CAPABILITIES MSR enumerates architectural features of RDCL_NO and
IBRS_ALL. Enumerated by CPUID.(EAX=07H, ECX=0):EDX[29].
https://software.intel.com/sites/default/files/managed/c5/63/336996-Speculative-Execution-Side-Channel-Mitigations.pdf
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1530781798-183214-2-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With the recent set of CPU hardware vulnerabilities on x86, it is
increasingly difficult to understand which CPU configurations are
good to use and what flaws they might be vulnerable to.
This doc attempts to help management applications and administrators in
picking sensible CPU configuration on x86 hosts. It outlines which of
the named CPU models are good choices, and describes which extra CPU
flags should be enabled to allow the guest to mitigate hardware flaws.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180627160103.13634-1-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
* Fixes for various bugs in SVE instructions
* Add model of Freescale i.MX6 UltraLite 14x14 EVK Board
* hw/arm: make bitbanded IO optional on ARMv7-M
* Add model of Cortex-M0 CPU
* Add support for loading Intel HEX files to the generic loader
* imx_spi: Unset XCH when TX FIFO becomes empty
* aspeed_sdmc: fix various bugs
* Fix bugs in Arm FP16 instruction support
* Fix aa64 FCADD and FCMLA decode
* softfloat: Fix missing inexact for floating-point add
* hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Hzcf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20180816' into staging
target-arm queue:
* Fixes for various bugs in SVE instructions
* Add model of Freescale i.MX6 UltraLite 14x14 EVK Board
* hw/arm: make bitbanded IO optional on ARMv7-M
* Add model of Cortex-M0 CPU
* Add support for loading Intel HEX files to the generic loader
* imx_spi: Unset XCH when TX FIFO becomes empty
* aspeed_sdmc: fix various bugs
* Fix bugs in Arm FP16 instruction support
* Fix aa64 FCADD and FCMLA decode
* softfloat: Fix missing inexact for floating-point add
* hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj()
# gpg: Signature made Thu 16 Aug 2018 14:33:41 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20180816: (30 commits)
hw/arm/mps2-tz: Replace init_sysbus_child() with sysbus_init_child_obj()
softfloat: Fix missing inexact for floating-point add
target/arm: Fix aa64 FCADD and FCMLA decode
target/arm: Use FZ not FZ16 for SVE FCVT single-half and double-half
target/arm: Use fp_status_fp16 for do_fmpa_zpzzz_h
target/arm: Ignore float_flag_input_denormal from fp_status_f16
target/arm: Adjust FPCR_MASK for FZ16
aspeed: add a max_ram_size property to the memory controller
aspeed_sdmc: Handle ECC training
aspeed_sdmc: Init status always idle
aspeed_sdmc: Set 'cache initial sequence' always true
aspeed_sdmc: Fix saved values
aspeed_sdmc: Extend number of valid registers
imx_spi: Unset XCH when TX FIFO becomes empty
Add QTest testcase for the Intel Hexadecimal
loader: Implement .hex file loader
loader: add rom transaction API
loader: extract rom_free() function
target/arm: add "cortex-m0" CPU model
hw/arm: make bitbanded IO optional on ARMv7-M
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we've got the common sysbus_init_child_obj() function, we do
not need the local init_sysbus_child() anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1534420566-15799-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For 0x1.0000000000003p+0 + 0x1.ffffffep+14 = 0x1.0001fffp+15
we dropped the sticky bit and so failed to raise inexact.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These insns require u=1; failed to include that in the switch
cases. This probably happened during one of the rebases just
before final commit.
Fixes: d17b7cdcf4
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were using the wrong flush-to-zero bit for the non-half input.
Fixes: 46d33d1e3c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When FZ is set, input_denormal exceptions are recognized, but this does
not happen with FZ16. The softfloat code has no way to distinguish
these bits and will raise such exceptions into fp_status_f16.flags,
so ignore them when computing the accumulated flags.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support for FZ16 was added, we failed to include the bit
within FPCR_MASK, which means that it could never be set.
Continue to zero FZ16 when ARMv8.2-FP16 is not enabled.
Fixes: d81ce0ef2c
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20180810193129.1556-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will be used to construct a memory region beyond the RAM region
to let firmwares scan the address space with load/store to guess how
much RAM the SoC has.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-7-joel@jms.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is required to ensure u-boot SDRAM training completes.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-6-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ast2500 SDRAM training routine busy waits on the 'init cycle busy
state' bit in DDR PHY Control/Status register #1 (MCR60).
This ensures the bit always reads zero, and allows training to
complete with upstream u-boot on the ast2500-evb.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-5-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SDRAM training routine sets the 'Enable cache initial' bit, and then
waits for the 'cache initial sequence' to be done.
Have it always return done, as there is no other side effects that the
model needs to implement. This allows the upstream u-boot training to
proceed on the ast2500-evb board.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-4-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes the intended protection of read-only values in the
configuration register. They were being always set to zero by mistake.
The read-only fields depend on the configured memory size of the system,
so they cannot be fixed at compile time. The most straight forward
option was to store them in the state structure.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-3-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SDMC on the ast2500 has 170 registers.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20180807075757.7242-2-joel@jms.id.au
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current emulation will clear the XCH bit when a burst finishes.
This is not quite correct. According to the i.MX7d referemce manual,
Rev 0.1, §10.1.7.3:
This bit [XCH] is cleared automatically when all data in the TXFIFO
and the shift register has been shifted out.
So XCH should be cleared when the FIFO empties, not on completion of a
burst. The FIFO is 64 x 32 bits = 2048 bits, while the max burst size
is larger at 4096 bits. So it's possible that the burst is not finished
after the TXFIFO empties.
Sending a large block (> 2048 bits) with the Linux driver will use a
burst that is larger than the TXFIFO. After the TXFIFO has emptied XCH
does not become unset, as the burst is not yet finished.
What should happen after the TXFIFO empties is the driver will refill it
and set XCH. The rising edge of XCH will trigger another transfer to
begin. However, since the emulation does not set XCH to 0, there is no
rising edge and the next trasfer never begins.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Message-id: 20180731201056.29257-1-tpiepho@impinj.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'test.hex' file is a memory test pattern stored in Hexadecimal Object
Format. It loads at 0x10000 in RAM and contains values from 0 through
255.
The test case verifies that the expected memory test pattern was loaded.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Suggested-by: Steffen Gortz <qemu.ml@steffen-goertz.de>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMM: changed qtest_startf() to qtest_initf() to work with
current master after the refactoring in commit 88b988c895]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds Intel Hexadecimal Object File format support to the
generic loader device. The file format specification is available here:
http://www.piclist.com/techref/fileext/hex/intel.htm
This file format is often used with microcontrollers such as the
micro:bit, Arduino, STM32, etc. Users expect to be able to run .hex
files directly with without first converting them to ELF. Most
micro:bit code is developed in web-based IDEs without direct user access
to binutils so it is important for QEMU to handle this file format
natively.
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180814162739.11814-6-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Image file loaders may add a series of roms. If an error occurs partway
through loading there is no easy way to drop previously added roms.
This patch adds a transaction mechanism that works like this:
rom_transaction_begin();
...call rom_add_*()...
rom_transaction_end(ok);
If ok is false then roms added in this transaction are dropped.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20180814162739.11814-5-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The next patch will need to free a rom. There is already code to do
this in rom_add_file().
Note that rom_add_file() uses:
rom = g_malloc0(sizeof(*rom));
...
if (rom->fw_dir) {
g_free(rom->fw_dir);
g_free(rom->fw_file);
}
The conditional is unnecessary since g_free(NULL) is a no-op.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-4-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a "cortex-m0" ARMv6-M CPU model.
Most of the register reset values set by other CPU models are not
relevant for the cut-down ARMv6-M architecture.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-3-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ARM CPUs have bitbanded IO, a memory region that allows convenient
bit access via 32-bit memory loads/stores. This eliminates the need for
read-modify-update instruction sequences.
This patch makes this optional feature an ARMv7MState qdev property,
allowing boards to choose whether they want bitbanding or not.
Status of boards:
* iotkit (Cortex M33), no bitband
* mps2 (Cortex M3), bitband
* msf2 (Cortex M3), bitband
* stellaris (Cortex M3), bitband
* stm32f205 (Cortex M3), bitband
As a side-effect of this patch, Peter Maydell noted that the Ethernet
controller on mps2 board is now accessible. Previously they were hidden
by the bitband region (which does not exist on the real board).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180814162739.11814-2-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested by booting linux 4.18 (built using imx_v6_v7_defconfig) on the
emulated board.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 3f8eb4300206634dc01e04b12f65b73c0ad2f955.1532984236.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows the default (and maximum) vector length to be set
from the command-line. Which is extraordinarily helpful in
debugging problems depending on vector length without having to
bake knowledge of PR_SET_SVE_VL into every guest binary.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also fold the FPCR/FPSR state onto the same line as PSTATE,
and mention but do not dump disabled FPU state.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With PC, there are 33 registers. Three per line lines up nicely
without overflowing 80 columns.
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The scaling should be solely on the memory operation size; the number
of registers being loaded does not come in to the initial computation.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The immediate should be scaled by the size of the memory reference,
not the size of the elements into which it is loaded.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The expression (int) imm + (uint32_t) len_align turns into uint32_t
and thus with negative imm produces a memory operation at the wrong
offset. None of the numbers involved are particularly large, so
change everything to use int.
Cc: qemu-stable@nongnu.org (3.0.1)
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org (3.0.1)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=DuZ8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-tests-2018-08-16' into staging
Testing patches for 2018-08-16
# gpg: Signature made Thu 16 Aug 2018 09:34:43 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-tests-2018-08-16: (25 commits)
libqtest: Improve error reporting for bad read from QEMU
tests/libqtest: Improve kill_qemu()
libqtest: Rename qtest_FOOv() to qtest_vFOO() for consistency
libqtest: Replace qtest_startf() by qtest_initf()
libqtest: Enable compile-time format string checking
migration-test: Clean up string interpolation into QMP, part 3
migration-test: Clean up string interpolation into QMP, part 2
migration-test: Clean up string interpolation into QMP, part 1
migration-test: Make wait_command() cope with '%'
tests: New helper qtest_qmp_receive_success()
migration-test: Make wait_command() return the "return" member
tests: Clean up string interpolation around qtest_qmp_device_add()
cpu-plug-test: Don't pass integers as strings to device_add
tests: Clean up string interpolation into QMP input (simple cases)
tests: Pass literal format strings directly to qmp_FOO()
qobject: qobject_from_jsonv() is dangerous, hide it away
test-qobject-input-visitor: Avoid format string ambiguity
libqtest: Simplify qmp_fd_vsend() a bit
qobject: New qobject_from_vjsonf_nofail(), qdict_from_vjsonf_nofail()
qobject: Replace qobject_from_jsonf() by qobject_from_jsonf_nofail()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
