Align the device tree blob to a 4KB boundary, not to QEMU's
idea of a page boundary -- the latter is the smallest possible
page size for the architecture, which on ARM is 1KB.
The documentation for Linux does not impose separation
or alignment requirements on the device tree blob, but
in practice some kernels will happily trash the entire
page the initrd ends in after they have finished uncompressing
the initrd. So 4KB-align the DTB to ensure it does not get
trampled by these kernels.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
read_splashfile() passes the address of an int variable as size_t *
parameter to g_file_get_contents(), with a cast to gag the compiler.
No problem on machines where sizeof(size_t) == sizeof(int).
Happens to work on my x86_64 box (64 bit little endian): the least
significant 32 bits of the file size end up in the right place
(caller's variable file_size), and the most significant 32 bits
clobber a place that gets assigned to before its next use (caller's
variable file_type).
I'd expect it to break on a 64 bit big-endian box.
Fix up the variable types and drop the problematic cast.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
case THINGY_3: idx++;
case THINGY_2: idx++;
case THINGY_1: idx++;
case THINGY_0: return s->thingy[idx];
This makes static analysers happy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add an explicit 'return' statement to a case in smc91c111_readb
rather than relying on fallthrough to the following case's
return statement, for code clarity and to placate static analysers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mark the deliberate fallthrough where we treat the case of
an attempt to read flash when it is an unknown command
state as if it were a normal read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark the fallthroughs as intentional in the code
pattern where we gradually increment an index before falling
into the code to read/write that array entry:
case THINGY_3: idx++;
case THINGY_2: idx++;
case THINGY_1: idx++;
case THINGY_0: return s->thingy[idx];
This makes static analysers happy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Explicitly mark cases where we are deliberately falling
through to the following code. In one case we insert a
'break' instead of falling through to a 'break', as this
seems slightly clearer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add some break statements that were accidentally omitted
from some cases of arm_sysctl_write(). The omission was
harmless because in both cases the following case did
an immediate break, but adding the breaks explicitly
placates static analysers and avoids weird behaviour if
the following register is ever implemented as something
other than a no-op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
extra-obj-y is somewhat complicated to understand. Replace it with a
special CONFIG_ALL symbol that is defined only at toplevel.
This limits the case of directories defining more than one
*-obj-y target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can
be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU
and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how
we define symbols for hardware components.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 67c5322d70:
I'm not sure if the retry logic has ever worked when not using FIFO mode. I
found this while writing a test case although code inspection confirms it is
definitely broken.
The TSR retry logic will never actually happen because it is guarded by an
'if (s->tsr_rety > 0)' but this is the only place that can ever make the
variable greater than zero. That effectively makes the retry logic an 'if (0)
I believe this is a typo and the intention was >= 0. Once this is fixed thoug
I see double transmits with my test case. This is because in the non FIFO
case, serial_xmit may get invoked while LSR.THRE is still high because the
character was processed but the retransmit timer was still active.
We can handle this by simply checking for LSR.THRE and returning early. It's
possible that the FIFO paths also need some attention.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Even if the previous logic was never worked, new logic breaks stuff -
namely,
qemu -enable-kvm -nographic -kernel /boot/vmlinuz-$(uname -r) -append console=ttyS0 -serial pty
the above command will cause the virtual machine to stuck at startup
using 100% CPU till one connects to the pty and sends any char to it.
Note this is rather typical invocation for various headless virtual
machines by libvirt.
So revert this change for now, till a better solution will be found.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a trivial patch to harmonize the coding style on
hw/etraxfs_eth.c. This is in preparation to split off the bitbang mdio
code into a separate file.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paul Brook <paul@codesourcery.com>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi: Drop useless null test in scsi_unit_attention()
lsi: use qbus_reset_all to reset SCSI bus
scsi: fix segfault with 0-byte disk
iscsi: add support for iSCSI NOPs [v2]
iscsi: partly avoid iovec linearization in iscsi_aio_writev
iscsi: add iscsi_create support
req was created by scsi_req_alloc(), which initializes req->dev to a
value it dereferences. req->dev isn't changed anywhere else.
Therefore, req->dev can't be null.
Drop the useless null test; it spooks Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When a 0-sized disk is found, READ CAPACITY will return a
LUN NOT READY error. However, because it returns -1 instead
of zero, the HBA will call scsi_req_continue. This will
typically cause a segmentation fault or an assertion failure.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Basically the same as usb-storage, but without automatic scsi
device setup. Also features support for up to 16 LUNs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a simpler solution to 869981, where migration breaks since qxl's
rom bar size has changed. Instead of ignoring fields in QXLRom, which is what has
actually changed, we remove some of the modes, a mechanism already
accounted for by the guest. The modes left allow for portrait and
landscape only modes, corresponding to orientations 0 and 1.
Orientations 2 and 3 are dropped.
Added assert so that rom size will fit the future QXLRom increases via
spice-protocol changes.
This patch has been tested with 6.1.0.10015. With the newer 6.1.0.10016
there are problems with both "(flipped)" modes prior to the patch, and
the patch loses the ability to set "Portrait" modes. But this is a
separate bug to be fixed in the driver, and besides the patch doesn't
affect the new arbitrary mode setting functionality.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This reverts commit a1cbfd554e.
Test isn't useless. scsi_req_enqueue() may finish the request (will
actually happen for requests which don't trigger any I/O such as
INQUIRY), then call usb_msd_command_complete() which in turn will
set s->req to NULL after unref'ing it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace by SYS_BUS_DEVICE() QOM cast macro using a scripted conversion.
Avoids the old macro creeping into new code.
Resolve a Coding Style warning in openpic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
A virtio-s390-bus is created during the init. So one VirtIODevice can be
connected on the virtio-s390-device through this bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This add the virtio-s390-bus which extends virtio-bus. So one VirtIODevice can
be connected on this bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create the virtio-pci device which is abstract. This transport device will
create a virtio-pci-bus, so one VirtIODevice can be connected.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce virtio-pci-bus, which extends virtio-bus. It is used with virtio-pci
transport device.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create the virtio-device which is abstract. All the virtio-device can extend
this class. It also add some functions to virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce virtio-bus. Refactored transport device will create a bus which
extends virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a max_dev field to BusClass to specify the maximum amount of devices allowed
on the bus (has no effect if max_dev=0)
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
STATUS_TIMEOUT is defined in winnt.h:
CC hw/tpci200.o
hw/tpci200.c:34:0:
warning: "STATUS_TIMEOUT" redefined [enabled by default]
/usr/lib/gcc/x86_64-w64-mingw32/4.6/../../../../x86_64-w64-mingw32/include/winnt.h:1036:0:
note: this is the location of the previous definition
Use STATUS_TIME instead of STATUS_TIMEOUT as suggested by Alberto Garcia.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-acpitable {file|data}=file reads the content of file, but it is
in binary form, so the file should be opened usin O_BINARY flag.
On *nix it is a no-op, but on windows and other weird platform
it is really needed.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
defineition -> definition
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Kevin Wolf (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
dataplane: support viostor virtio-pci status bit setting
dataplane: avoid reentrancy during virtio_blk_data_plane_stop()
win32-aio: use iov utility functions instead of open-coding them
win32-aio: Fix memory leak
win32-aio: Fix vectored reads
aio: Fix return value of aio_poll()
ide: Remove wrong assertion
block: fix null-pointer bug on error case in block commit
84f2d0ea added an argument to function usb_host_info.
The stub function must match the declaration in usb.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Code mixes uint32_t, int and size_t. Very unlikely to go wrong in
practice, but clean it up anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Many callers pass size_t, which gets silently truncated to uint32_t.
Harmless, because all practical sizes are well below 4GiB. Clean it
up anyway. Size overflow now fails assertions.
Bonus: saves a whole bunch of silly casts.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
No caller is checking the value, so all errors get ignored, usually
silently. assert() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf:
PPC: KVM: Add support for EPR with KVM
openpic: export e500 epr enable into a ppc.c function
Update Linux kernel headers
PPC: e500: Change in-memory order of load blobs
PPC: Provide zero SVR for -cpu e500mc and e5500
PPC: E500: Calculate loading blob offsets properly
openpic: set mixed mode as supported
openpic: unify gcr mode mask updates
openpic: move gcr write into a function
Allow virtio machines to register for different diag500 function
codes and convert s390-virtio to use it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This enables qemu -cpu help to return a list of supported CPU models
on s390 and also to query for cpu definitions in the monitor.
Initially only cpu model = host is returned. This needs to be reworked
into a full-fledged CPU model handling later on.
This change is needed to allow libvirt exploiters (like OpenStack)
to specify a CPU model.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[agraf: fix s390x-linux-user, adjust header locations]
Signed-off-by: Alexander Graf <agraf@suse.de>
Lets move the code to setup IPL for external kernel
or via the zipl rom into a separate file. This allows to
- define a reboot handler, setting up the PSW appropriately
- enhance the boot code to IPL disks that contain a bootmap that
was created with zipl under LPAR or z/VM (future patch)
- reuse that code for several machines (e.g. virtio-ccw and virtio-s390)
- allow different machines to provide different defaults
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: symbolify initial psw, adjust header file location, fix for QOM]
Signed-off-by: Alexander Graf <agraf@suse.de>
Enabling and disabling the EPR capability (mpic_proxy) is a system
wide operation. As such, it belongs into the ppc.c file, since that's
where PPC specific machine wide logic happens.
Signed-off-by: Alexander Graf <agraf@suse.de>
