We need both git and a working compiler to build the tools. Although
the qemu:debian9 image also has a bunch of extra dependencies it would
be fairly unusual for a user not to already have this layer available
for one of our many other docker images so lets not complicate things.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The .gitignore was being a little over enthusiastic hiding files.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
When we escalate a v8M exception to HardFault, if AIRCR.BFHFNMINNS is
set then we need to decide whether it should become a secure HardFault
or a nonsecure HardFault. We should always escalate to the same
target security state as the original exception. The current code
tries to test this using the 'secure' bool, which is not right because
that flag indicates whether the target security state only for
banked exceptions; the effect was that we were incorrectly escalating
always-secure exceptions like SecureFault to a nonsecure HardFault.
Fix this by defining, logging and using a new 'targets_secure' bool
which tracks the condition we actually want.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180723123457.2038-1-peter.maydell@linaro.org
In icc_dir_write() we were incorrectly checking HCR_EL2.FMO
when determining whether IRQ should be routed to EL2; this should
be HCR_EL2.IMO (compare the GICv3 pseudocode ICC_DIR_EL1[]).
Use the correct mask.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180723180337.17378-1-peter.maydell@linaro.org
When the user pushes Command-F in QEMU while the mouse is ungrabbed, QEMU
goes into full screen mode. When the user finally releases the command key,
it is sent to the guest as an event. The makes the guest operating system
think the command key is down when it is really up. To prevent this situation
from happening, we simply drop the first command key event after the user has
gone into full screen mode using Command-F.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Message-id: 20180703020017.1032-1-programmingkidx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
json_parser_parse_err() may return something else than a QDict, in
which case we loose the object. Let's keep track of the original
object to avoid leaks.
When an error occurs, "qdict" contains the response, but we still
check the "execute" key there. Untangle a bit this code, by having a
clear error path.
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The defrag.exe tool which is used for executing the fstrim command
on Windows doesn't support retrim for OSes lower than Win8. This
commit handles this case and returns a suitable error.
Output of fstrim before this commit:
{"execute":"guest-fstrim"}
{"return": {"paths": [{"path": "C:\\", "error": "An invalid command line option
was specified. (0x89000008)"}, {"path": "F:\\", "error": "An invalid command
line option was specified. (0x89000008)"}, {"path": "S:\\", "error": "An
invalid command line option was specified. (0x89000008)"}]}}
Reported on:
https://bugzilla.redhat.com/show_bug.cgi?id=1594113
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
* use alternative version query code proposed by Sameeh
* fix up version check logic
* avoid CamelCase variable names when possible
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When host vector registers and operations were introduced, I failed
to mark the registers call clobbered as required by the ABI.
Fixes: 770c2fc7bb
Cc: qemu-stable@nongnu.org
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rename DCACHE to DATA_CACHE and ICACHE to INSTRUCTION_CACHE.
This avoids conflict with Linux asm/cachectl.h macros and fixes
build failure on mips hosts.
Reported-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180717194010.30096-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's annoying to see this debug message every time you use vvfat.
Disable it with the DLOG() macro by default, as it is done with the
other debug messages in this file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
223 tests persistent dirty bitmaps which are not supported in
compat=0.10, so that option is unsupported for this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test directory should be filtered before the image format, otherwise
the test will fail if the image format is part of the test directory,
like so:
[...]
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+can't open: Could not open '/tmp/test-IMGFMT/t.IMGFMT': Is a directory
[...]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test doesn't actually care about the format anyway, it just
supports "all formats" as a convenience. LUKS however does not use a
simple image filename which confuses this iotest.
We can simply skip the test for formats that use IMGOPTSSYNTAX for
their filenames without missing much coverage.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
the min_sparse convert parameter can overflow (e.g. -S 1024G)
in the conversion from int64_t to int resulting in a negative
min_sparse parameter. Avoid this by limiting the valid parameters
to sane values. In fact anything exceeding the convert buffer size
is also pointless. While at it also forbid values that are non
multiple of 512 to avoid undesired behaviour. For instance, values
between 1 and 511 were legal, but resulted in full allocation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The test case uses block devices with driver=file, which causes the test
to fail after commit 230ff73904 added a deprecation warning for this.
Fix the test case to use driver=host_device and update the reference
output accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The instance_init function of the "exynos4210.gic" device creates a
new "arm_gic" device and immediately realizes it with qdev_init_nofail().
This will leave a lot of object in the QOM tree during introspection of
the "exynos4210.gic" device, e.g. reproducible by starting QEMU like this:
qemu-system-aarch64 -M none -nodefaults -nographic -monitor stdio
And then by running "info qom-tree" at the HMP monitor, followed by
"device_add exynos4210.gic,help" and finally checking "info qom-tree"
again.
Also note that qdev_init_nofail() can exit QEMU in case of errors - and
this must never happen during an instance_init function, otherwise QEMU
could terminate unexpectedly during introspection of a device.
Since most of the code that follows the qdev_init_nofail() depends on
the realized "gicbusdev", the easiest solution to the problem is to
turn the whole instance_init function into a realize function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1532337784-334-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
nand_init() does not only create the NAND device, it also realizes
the device with qdev_init_nofail() already. So we must not call
nand_init() from an instance_init function like sl_nand_init(),
otherwise we get superfluous NAND devices in the QOM tree after
introspecting the 'sl-nand' device. So move the nand_init() to the
realize function of 'sl-nand' instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1532006134-7701-1-git-send-email-thuth@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To correctly handle small (less than TARGET_PAGE_SIZE) MPU regions,
we must correctly handle the case where the address being looked
up hits in an MPU region that is not small but the address is
in the same page as a small region. For instance if MPU region
1 covers an entire page from 0x2000 to 0x2400 and MPU region
2 is small and covers only 0x2200 to 0x2280, then for an access
to 0x2000 we must not return a result covering the full page
even though we hit the page-sized region 1. Otherwise we will
then cache that result in the TLB and accesses that should
hit region 2 will incorrectly find the region 1 information.
Check for the case where we miss an MPU region but it is still
within the same page, and in that case narrow the size we will
pass to tlb_set_page_with_attrs() for whatever the final
outcome is of the MPU lookup.
Reported-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180716133302.25989-1-peter.maydell@linaro.org
Writes in PIO mode have two requirements:
- A data interrupt must be generated after a write command has been
issued to indicate that the chip is ready to receive data.
- A block interrupt must be generated after each block to indicate
that the chip is ready to receive the next data block.
Rearrange the code to make this happen. Tested on raspi3 (in PIO mode)
and raspi2 (in DMA mode).
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1531779837-20557-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- we can run now most of the targets on a ppc64 host with 64kB pages
- add swapcontext syscall to run tests/test-coroutine in
debian-powerpc-user-cross
-----BEGIN PGP SIGNATURE-----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=DTRa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging
Some ppc/ppc64 fixes:
- we can run now most of the targets on a ppc64 host with 64kB pages
- add swapcontext syscall to run tests/test-coroutine in
debian-powerpc-user-cross
# gpg: Signature made Mon 23 Jul 2018 13:55:57 BST
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg: aka "Laurent Vivier <laurent@vivier.eu>"
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-3.0-pull-request:
linux-user/ppc: Implement swapcontext syscall
linux-user: fix ELF load alignment error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
@cur_mon is null unless the main thread is running monitor code, either
HMP code within monitor_read(), or QMP code within
monitor_qmp_dispatch().
Use of @cur_mon outside the main thread is therefore unsafe.
Most of its uses are in monitor command handlers. These run in the main
thread.
However, there are also uses hiding elsewhere, such as in
error_vprintf(), and thus error_report(), making these functions unsafe
outside the main thread. No such unsafe uses are known at this time.
Regardless, this is an unnecessary trap. It's an ancient trap, though.
More recently, commit cf869d5317 "qmp: support out-of-band (oob)
execution" spiced things up: the monitor I/O thread assigns to @cur_mon
when executing commands out-of-band. Having two threads save, set and
restore @cur_mon without synchronization is definitely unsafe. We can
end up with @cur_mon null while the main thread runs monitor code, or
non-null while it runs non-monitor code.
We could fix this by making the I/O thread not mess with @cur_mon, but
that would leave the trap armed and ready.
Instead, make @cur_mon thread-local. It's now reliably null unless the
thread is running monitor code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[peterx: update subject and commit message written by Markus]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180720033451.32710-1-peterx@redhat.com>
Making 'allow-oob' optional in SchemaInfoCommand permits omitting it
in the common case. Shrinks query-qmp-schema's output from 122.1KiB
to 118.6KiB for me.
Note that out-of-band execution is still experimental (you have to
configure the monitor with x-oob=on to use it).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180718090557.17248-1-armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Those comments change often when ui/gtk.c is changed and are not
really useful.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180720212509.18339-1-sw@weilnetz.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows the tests generated by debian-powerpc-user-cross
to function properly, especially tests/test-coroutine.
Technically this syscall is available to both ppc32 and ppc64,
but only ppc32 glibc actually uses it. Thus the ppc64 path is
untested.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180718200648.22529-1-richard.henderson@linaro.org>
When we try to use some targets on ppc64, it can happen the target
doesn't support the host page size to align ELF load sections and
fails with:
ELF load command alignment not page-aligned
Since commit a70daba377 ("linux-user: Tell guest about big host
page sizes") the host page size is used to align ELF sections, but
this doesn't work if the alignment required by the load section is
smaller than the host one. For these cases, we continue to use the
TARGET_PAGE_SIZE instead of the host one.
I have tested this change on ppc64, and it fixes qemu linux-user for:
s390x, m68k, i386, arm, aarch64, hppa
and I have tested it doesn't break the following targets:
x86_64, mips64el, sh4
mips and mipsel abort, but I think for another reason.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: fixed "info->alignment = 0"]
Message-Id: <20180716195349.29959-1-laurent@vivier.eu>
Version: GnuPG v1
iQEcBAABAgAGBQJbUS+LAAoJEO8Ells5jWIRaM0H+wZMfW4SDf+CaR3e4LZVRvyS
88km4y4EZFbAnVmI89fUzn9FhDizT659vgTxNwrFd1S/p/x51OzrEJtiGm/OfkRc
y/fU2DQt8eIx2WDp7HzvHyMYXd08WQiItyJbpCLUukqXAzX2v4OATnz9ZoAxPHof
z0fzejOokEo0fKqe+LgOB3upQDRsXGPOYiSo7wUHy1tk9P+ndym5kZcdU44EPtON
Q/6COv3claUmEmDtQbpOhPZ2HPFL5nJoSL9rIKfUEweJj1+OHp7b1+lrw1W7sPRP
INUdmX5+bnk6oieR2dsSFp8IealZH6BwZ4jkc8sME/HeCSBTy1mWyeFa+TDA2lI=
=3U4O
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Fri 20 Jul 2018 01:40:43 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: fix memory leak on success to create a tap device
e1000e: Prevent MSI/MSI-X storms
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The memory leak on success to create a tap device. And the nfds and
nvhosts may not be the same and need to be processed separately.
Fixes: 07825977 ("tap: fix memory leak on failure to create a multiqueue tap device")
Fixes: 264986e2 ("tap: multiqueue support")
Cc: qemu-stable@nongnu.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Only signal MSI/MSI-X events on rising edges. So far we re-triggered the
interrupt sources even if the guest did no consumed the pending one,
easily causing interrupt storms.
Issue was observable with Linux 4.16 e1000e driver when MSI-X was used.
Vector 2 was causing interrupt storms after the driver activated the
device.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is based on Thomas's work fixing introspection problems [1] and
applied to the RISC-V port.
1: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03261.html
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAltQtu8ACgkQIeENKd+X
cFTCvAf+MNkMDcOJOlb2AsCwmYcnDj1YwiaobkDpPbKCl4u2q6j6kOhbBGpaROE0
RBwIYOMIuWiyevnlDSytFGgc+TSnriFNmwMrfMKlD8haRbc+mbYulRICAYIRWCOo
mk8Z+GYn3fw8tYiIudEj2jmObA7ushMjhKvo8/RmWk+Gz866KS8BpqR8LiTm6E66
ejiar28IDId+XUbl3OJhh4RzUCyttEMfmUKE5s8Bi4gPN6J578FexdcLIlvkqPqN
UUMz/8GgogjvFS/jkR5fRIcdqV6flKNtwnzZByTu76HtyvF7kXMr5PHe52kgVAQ2
0RYea4XxQWMG+9MeZ/CsXYyiJRi/Lg==
=EVRY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-pull-20180719' into staging
riscv: Fix introspection problems
This is based on Thomas's work fixing introspection problems [1] and
applied to the RISC-V port.
1: https://lists.gnu.org/archive/html/qemu-devel/2018-07/msg03261.html
# gpg: Signature made Thu 19 Jul 2018 17:06:07 BST
# gpg: using RSA key 21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-pull-20180719:
spike: Fix crash when introspecting the device
riscv_hart: Fix crash when introspecting the device
virt: Fix crash when introspecting the device
sifive_u: Fix crash when introspecting the device
sifive_e: Fix crash when introspecting the device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In AdvSIMD we can only do 32x32 integer multiples although SVE is
capable of larger 64 bit multiples. As a result we can end up
generating invalid opcodes. Fix this by only reprting we can emit
mul vector ops if the size is small enough.
Fixes a crash on:
sve-all-short-v8.3+sve@vq3/insn_mul_z_zi___INC.risu.bin
When running on AArch64 hardware.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180719154248.29669-1-alex.bennee@linaro.org>
[rth: Removed the tcg_debug_assert -- there are plenty of other
cases that we do not diagnose within the insn encoding helpers.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the new object_initialize_child() and sysbus_init_child_obj() to
fix the issue.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The '-trace' and '--trace' spellings are only both supported in qemu
binary, while for qemu-nbd or qemu-img only '--trace' spelling is
supported. So for the consistency of trace option invocation, we
should use double-dash spelling in our documentation.
This's also mentioned in
https://wiki.qemu.org/BiteSizedTasks#Consistent_option_usage_in_documentation
.
Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1530674247-31200-1-git-send-email-baiyaowei@cmss.chinamobile.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Throttle groups consist of members sharing one throttling state
(including bps/iops limits). Round-robin scheduling is used to ensure
fairness. If a group member already has a timer pending then other
groups members do not schedule their own timers. The next group member
will have its turn when the existing timer expires.
A hang may occur when a group member leaves while it had a timer
scheduled. Although the code carefully removes the group member from
the round-robin list, it does not schedule the next member. Therefore
remaining members continue to wait for the removed member's timer to
expire.
This patch schedules the next request if a timer is pending.
Unfortunately the actual bug is a race condition that I've been unable
to capture in a test case.
Sometimes drive2 hangs when drive1 is removed from the throttling group:
$ qemu ... -drive if=none,id=drive1,cache=none,format=qcow2,file=data1.qcow2,iops=100,group=foo \
-device virtio-blk-pci,id=virtio-blk-pci0,drive=drive1 \
-drive if=none,id=drive2,cache=none,format=qcow2,file=data2.qcow2,iops=10,group=foo \
-device virtio-blk-pci,id=virtio-blk-pci1,drive=drive2
(guest-console1)# fio -filename /dev/vda 4k-seq-read.job
(guest-console2)# fio -filename /dev/vdb 4k-seq-read.job
(qmp) {"execute": "block_set_io_throttle", "arguments": {"device": "drive1","bps": 0,"bps_rd": 0,"bps_wr": 0,"iops": 0,"iops_rd": 0,"iops_wr": 0}}
Reported-by: Nini Gu <ngu@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180704145410.794-1-stefanha@redhat.com
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1535914
Cc: Alberto Garcia <berto@igalia.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Usually, when baselining two CPU models, whereby one of them has base
CPU features disabled (e.g. z14-base,msa=off), we fallback to an older
model that did not have these features in the base model. We always try to
create a "sane" CPU model (as far as possible), and one part of it is that
removing base features is no good and to be avoided.
Now, if we disable base features that were part of a z900, we're out of
luck. We won't find a CPU model and QEMU will segfault. This is a
scenario that should never happen in real life, but it can be used to
crash QEMU.
So let's properly report an error if we baseline e.g.:
{ "execute": "query-cpu-model-baseline",
"arguments" : { "modela": { "name": "z14-base", "props": {"esan3" : false}},
"modelb": { "name": "z14"}} }
Instead of segfaulting.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180718092330.19465-1-david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
