Move the definition of VhostUserProtocolFeature to
include/hw/virtio/vhost-user.h.
Remove previous definitions in hw/scsi/vhost-user-scsi.c,
hw/virtio/vhost-user.c, and hw/virtio/virtio-qmp.c.
Previously there were 3 separate definitions of this over 3 different
files. Now only 1 definition of this will be present for these 3 files.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Otherwise when a FORMAT UNIT command is issued, the SCSI layer can become
confused because it can find itself in the situation where it thinks there
is still data to be transferred which can cause the next emulated SCSI
command to fail.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 6ab71761 ("scsi-disk: add FORMAT UNIT command")
Tested-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230913204410.65650-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the case where a SCSI layer transfer is incorrectly terminated, it is
possible for a TI command to cause a SCSI buffer overflow due to the
expected transfer data length being less than the available data in the
FIFO. When this occurs the unsigned async_len variable underflows and
becomes a large offset which writes past the end of the allocated SCSI
buffer.
Restrict the non-DMA transfer length to be the smallest of the expected
transfer length and the available FIFO data to ensure that it is no longer
possible for the SCSI buffer overflow to occur.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1810
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230913204410.65650-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The call to esp_dma_enable() was being made with the SYSBUS_ESP type instead of
the ESP type. This meant that when GPIO 1 was being used to trigger a DMA
request from an external DMA controller, the setting of ESPState's dma_enabled
field would clobber unknown memory whilst the dma_cb callback pointer would
typically return NULL so the DMA request would never start.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230913204410.65650-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are doing things like
nb_sectors /= (s->qdev.blocksize / BDRV_SECTOR_SIZE);
in the code here (e.g. in scsi_disk_emulate_mode_sense()), so if
the blocksize is smaller than BDRV_SECTOR_SIZE (=512), this crashes
with a division by 0 exception. Thus disallow block sizes of 256
bytes to avoid this situation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1813
CVE: 2023-42467
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20230925091854.49198-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_clear_unit_attention() now only handles REPORTED LUNS DATA HAS
CHANGED.
This only happens when we handle REPORT LUNS commands, so let's rename
the function in scsi_clear_reported_luns_changed() and call it only in
scsi_target_emulate_report_luns().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-ID: <20230712134352.118655-4-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous commit moved the unit attention clearing when we create
the request. So now we can clean scsi_clear_unit_attention() to handle
only the case of the REPORT LUNS command: this is the only case in
which a UNIT ATTENTION is cleared without having been reported.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-ID: <20230712134352.118655-3-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 1880ad4f4e ("virtio-scsi: Batched prepare for cmd reqs") split
calls to scsi_req_new() and scsi_req_enqueue() in the virtio-scsi device.
No ill effects were observed until commit 8cc5583abe ("virtio-scsi: Send
"REPORTED LUNS CHANGED" sense data upon disk hotplug events") added a
unit attention that was easy to trigger with device hotplug and
hot-unplug.
Because the two calls were separated, all requests in the batch were
prepared calling scsi_req_new() to report a sense. The first one
submitted would report the right sense and reset it to NO_SENSE, while
the others reported CHECK_CONDITION with no sense data. This caused
SCSI errors in Linux.
To solve this issue, let's fetch the unit attention as early as possible
when we prepare the request, so that only the first request in the batch
will use the unit attention SCSIReqOps and the others will not report
CHECK CONDITION.
Fixes: 1880ad4f4e ("virtio-scsi: Batched prepare for cmd reqs")
Fixes: 8cc5583abe ("virtio-scsi: Send "REPORTED LUNS CHANGED" sense data upon disk hotplug events")
Reported-by: Thomas Huth <thuth@redhat.com>
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2176702
Co-developed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-ID: <20230712134352.118655-2-sgarzare@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio_scsi_dataplane_stop() calls blk_drain_all(), which invokes
->drained_begin()/->drained_end() after we've already detached the host
notifier. virtio_scsi_drained_end() currently attaches the host notifier
again and leaves it dangling after dataplane has stopped.
This results in the following assertion failure because
virtio_scsi_defer_to_dataplane() is called from the IOThread instead of
the main loop thread:
qemu-system-x86_64: ../softmmu/memory.c:1111: memory_region_transaction_commit: Assertion `qemu_mutex_iothread_locked()' failed.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1680
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230611193924.2444914-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous commit remove the unnecessary "virtio-access.h"
header. These files no longer have target-specific dependency.
Move them to the generic 'softmmu_ss' source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-11-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
None of these files use the VirtIO Load/Store API declared
by "hw/virtio/virtio-access.h". This header probably crept
in via copy/pasting, remove it.
Note, "virtio-access.h" is target-specific, so any file
including it also become tainted as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-10-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Following the SCSI variable named '[specific_]scsi_ss', rename the
target-specific VirtIO/SCSI set prefixed with 'specific_'. This will
help when adding target-agnostic VirtIO/SCSI set in few commits.
No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-5-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
We will modify this file shortly. Re-arrange it slightly first,
declaring source sets first.
No logical change.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230524093744.88442-4-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Instead of adding 'vhost-scsi-common.c' twice (for VHOST_SCSI and
VHOST_USER_SCSI), have it depend on VHOST_SCSI_COMMON, selected by
both symbols.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
GCC9 is confused when building with CFLAG -O3:
hw/scsi/megasas.c: In function ‘megasas_scsi_realize’:
hw/scsi/megasas.c:2387:26: error: duplicated ‘if’ condition [-Werror=duplicated-cond]
2387 | } else if (s->fw_sge >= 128 - MFI_PASS_FRAME_SIZE) {
hw/scsi/megasas.c:2385:19: note: previously used here
2385 | if (s->fw_sge >= MEGASAS_MAX_SGE - MFI_PASS_FRAME_SIZE) {
cc1: all warnings being treated as errors
When this device was introduced in commit e8f943c3bc, the author
cared about modularity, using a definition for the firmware limit.
However if the firmware limit isn't changed (MEGASAS_MAX_SGE = 128),
the code ends doing the same check twice.
Per the maintainer [*]:
> The original code assumed that one could change MFI_PASS_FRAME_SIZE,
> but it turned out not to be possible as it's being hardcoded in the
> drivers themselves (even though the interface provides mechanisms to
> query it). So we can remove the duplicate lines.
Add the 'MEGASAS_MIN_SGE' definition for the '64' magic value,
slightly rewrite the condition check to simplify a bit the logic
and remove the unnecessary / duplicated check.
[*] https://lore.kernel.org/qemu-devel/e0029fc5-882f-1d63-15e3-1c3dbe9b6a2c@suse.de/
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Message-Id: <20230328210126.16282-1-philmd@linaro.org>
Mechanical change running Coccinelle spatch with content
generated from the qom-cast-macro-clean-cocci-gen.py added
in the previous commit.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230601093452.38972-3-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce a new API for thread-local blk_io_plug() that does not
traverse the block graph. The goal is to make blk_io_plug() multi-queue
friendly.
Instead of having block drivers track whether or not we're in a plugged
section, provide an API that allows them to defer a function call until
we're unplugged: blk_io_plug_call(fn, opaque). If blk_io_plug_call() is
called multiple times with the same fn/opaque pair, then fn() is only
called once at the end of the function - resulting in batching.
This patch introduces the API and changes blk_io_plug()/blk_io_unplug().
blk_io_plug()/blk_io_unplug() no longer require a BlockBackend argument
because the plug state is now thread-local.
Later patches convert block drivers to blk_io_plug_call() and then we
can finally remove .bdrv_co_io_plug() once all block drivers have been
converted.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20230530180959.1108766-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-scsi Host Bus Adapter provides access to devices on a SCSI
bus. Those SCSI devices typically have a BlockBackend. When the
BlockBackend enters a drained section, the SCSI device must temporarily
stop submitting new I/O requests.
Implement this behavior by temporarily stopping virtio-scsi virtqueue
processing when one of the SCSI devices enters a drained section. The
new scsi_device_drained_begin() API allows scsi-disk to message the
virtio-scsi HBA.
scsi_device_drained_begin() uses a drain counter so that multiple SCSI
devices can have overlapping drained sections. The HBA only sees one
pair of .drained_begin/end() calls.
After this commit, virtio-scsi no longer depends on hw/virtio's
ioeventfd aio_set_event_notifier(is_external=true). This commit is a
step towards removing the aio_disable_external() API.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-19-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_queue_aio_detach_host_notifier() does two things:
1. It removes the fd handler from the event loop.
2. It processes the virtqueue one last time.
The first step can be peformed by any thread and without taking the
AioContext lock.
The second step may need the AioContext lock (depending on the device
implementation) and runs in the thread where request processing takes
place. virtio-blk and virtio-scsi therefore call
virtio_queue_aio_detach_host_notifier() from a BH that is scheduled in
AioContext.
The next patch will introduce a .drained_begin() function that needs to
call virtio_queue_aio_detach_host_notifier(). .drained_begin() functions
cannot call aio_poll() to wait synchronously for the BH. It is possible
for a .drained_poll() callback to asynchronously wait for the BH, but
that is more complex than necessary here.
Move the virtqueue processing out to the callers of
virtio_queue_aio_detach_host_notifier() so that the function can be
called from any thread. This is in preparation for the next patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230516190238.8401-17-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is part of an effort to remove the aio_disable_external()
API because it does not fit in a multi-queue block layer world where
many AioContexts may be submitting requests to the same disk.
The SCSI emulation code is already in good shape to stop using
aio_disable_external(). It was only used by commit 9c5aad84da
("virtio-scsi: fixed virtio_scsi_ctx_check failed when detaching scsi
disk") to ensure that virtio_scsi_hotunplug() works while the guest
driver is submitting I/O.
Ensure virtio_scsi_hotunplug() is safe as follows:
1. qdev_simple_device_unplug_cb() -> qdev_unrealize() ->
device_set_realized() calls qatomic_set(&dev->realized, false) so
that future scsi_device_get() calls return NULL because they exclude
SCSIDevices with realized=false.
That means virtio-scsi will reject new I/O requests to this
SCSIDevice with VIRTIO_SCSI_S_BAD_TARGET even while
virtio_scsi_hotunplug() is still executing. We are protected against
new requests!
2. scsi_qdev_unrealize() already contains a call to
scsi_device_purge_requests() so that in-flight requests are cancelled
synchronously. This ensures that no in-flight requests remain once
qdev_simple_device_unplug_cb() returns.
Thanks to these two conditions we don't need aio_disable_external()
anymore.
Cc: Zhengui Li <lizhengui@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only report a transport reset event to the guest after the SCSIDevice
has been unrealized by qdev_simple_device_unplug_cb().
qdev_simple_device_unplug_cb() sets the SCSIDevice's qdev.realized field
to false so that scsi_device_find/get() no longer see it.
scsi_target_emulate_report_luns() also needs to be updated to filter out
SCSIDevices that are unrealized.
Change virtio_scsi_push_event() to take event information as an argument
instead of the SCSIDevice. This allows virtio_scsi_hotunplug() to emit a
VIRTIO_SCSI_T_TRANSPORT_RESET event after the SCSIDevice has already
been unrealized.
These changes ensure that the guest driver does not see the SCSIDevice
that's being unplugged if it responds very quickly to the transport
reset event.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a helper function to check whether the device is realized without
requiring the Big QEMU Lock. The next patch adds a second caller. The
goal is to avoid spreading DeviceState field accesses throughout the
code.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We cannot use the generic reentrancy guard in the LSI code, so
we have to manually prevent endless reentrancy here. The problematic
lsi_execute_script() function has already a way to detect whether
too many instructions have been executed - we just have to slightly
change the logic here that it also takes into account if the function
has been called too often in a reentrant way.
The code in fuzz-lsi53c895a-test.c has been taken from an earlier
patch by Mauro Matteo Cascella.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1563
Message-Id: <20230522091011.1082574-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While trying to use a SCSI disk on the LSI controller with an
older version of Fedora (25), I'm getting:
qemu: warning: Blocked re-entrant IO on MemoryRegion: lsi-mmio at addr: 0x34
and the SCSI controller is not usable. Seems like we have to
disable the reentrancy checker for the MMIO region, too, to
get this working again.
The problem could be reproduced it like this:
./qemu-system-x86_64 -accel kvm -m 2G -machine q35 \
-device lsi53c810,id=lsi1 -device scsi-hd,drive=d0 \
-drive if=none,id=d0,file=.../somedisk.qcow2 \
-cdrom Fedora-Everything-netinst-i386-25-1.3.iso
Where somedisk.qcow2 is an image that contains already some partitions
and file systems.
In the boot menu of Fedora, go to
"Troubleshooting" -> "Rescue a Fedora system" -> "3) Skip to shell"
Then check "dmesg | grep -i 53c" for failure messages, and try to mount
a partition from somedisk.qcow2.
Message-Id: <20230516090556.553813-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using linux 6.x guest, at boot time, an inquiry on a scsi-generic
device makes qemu crash. This is caused by a buffer overflow when
scsi-generic patches the block limits VPD page.
Do the operations on a temporary on-stack buffer that is guaranteed
to be large enough.
Reported-by: Théo Maillart <tmaillart@freebox.fr>
Analyzed-by: Théo Maillart <tmaillart@freebox.fr>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no need for the AioContext lock in aio_wait_bh_oneshot().
It's easy to remove the lock from existing callers and then switch from
AIO_WAIT_WHILE() to AIO_WAIT_WHILE_UNLOCKED() in aio_wait_bh_oneshot().
Document that the AioContext lock should not be held across
aio_wait_bh_oneshot(). Holding a lock across aio_poll() can cause
deadlock so we don't want callers to do that.
This is a step towards getting rid of the AioContext lock.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230404153307.458883-1-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As the code is designed to use the memory APIs to access the script ram,
disable reentrancy checks for the pseudo-RAM ram_io MemoryRegion.
In the future, ram_io may be converted from an IO to a proper RAM MemoryRegion.
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20230427211013.2994127-6-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This protects devices from bh->mmio reentrancy issues.
Thanks: Thomas Huth <thuth@redhat.com> for diagnosing OS X test failure.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230427211013.2994127-5-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Bring the files in line with the QEMU coding style, with spaces
for indentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/378
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315032649.57568-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The Free Software Foundation moved to a new address and some
sources in QEMU referred to their old location.
The address should be updated and replaced by a pointer to
<https://www.gnu.org/licenses/>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/379
Signed-off-by: Khadija Kamran <kkamran.bese16seecs@seecs.edu.pk>
Message-Id: <576ee9203fdac99d7251a98faa66b9ce1e7febc5.1675941486.git.kkamran.bese16seecs@seecs.edu.pk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When an IOThread is configured, the ctrl virtqueue is processed in the
IOThread. TMFs that reset SCSI devices are currently called directly
from the IOThread and trigger an assertion failure in blk_drain() from
the following call stack:
virtio_scsi_handle_ctrl_req -> virtio_scsi_do_tmf -> device_code_reset
-> scsi_disk_reset -> scsi_device_purge_requests -> blk_drain
../block/block-backend.c:1780: void blk_drain(BlockBackend *): Assertion `qemu_in_main_thread()' failed.
The blk_drain() function is not designed to be called from an IOThread
because it needs the Big QEMU Lock (BQL).
This patch defers TMFs that reset SCSI devices to a Bottom Half (BH)
that runs in the main loop thread under the BQL. This way it's safe to
call blk_drain() and the assertion failure is avoided.
Introduce s->tmf_bh_list for tracking TMF requests that have been
deferred to the BH. When the BH runs it will grab the entire list and
process all requests. Care must be taken to clear the list when the
virtio-scsi device is reset or unrealized. Otherwise deferred TMF
requests could execute later and lead to use-after-free or other
undefined behavior.
The s->resetting counter that's used by TMFs that reset SCSI devices is
accessed from multiple threads. This patch makes that explicit by using
atomic accessor functions. With this patch applied the counter is only
modified by the main loop thread under the BQL but can be read by any
thread.
Reported-by: Qing Wang <qinwang@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
dma_blk_cb() only takes the AioContext lock around ->io_func(). That
means the rest of dma_blk_cb() is not protected. In particular, the
DMAAIOCB field accesses happen outside the lock.
There is a race when the main loop thread holds the AioContext lock and
invokes scsi_device_purge_requests() -> bdrv_aio_cancel() ->
dma_aio_cancel() while an IOThread executes dma_blk_cb(). The dbs->acb
field determines how cancellation proceeds. If dma_aio_cancel() sees
dbs->acb == NULL while dma_blk_cb() is still running, the request can be
completed twice (-ECANCELED and the actual return value).
The following assertion can occur with virtio-scsi when an IOThread is
used:
../hw/scsi/scsi-disk.c:368: scsi_dma_complete: Assertion `r->req.aiocb != NULL' failed.
Fix the race by holding the AioContext across dma_blk_cb(). Now
dma_aio_cancel() under the AioContext lock will not see
inconsistent/intermediate states.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If requests are being processed in the IOThread when a SCSIDevice is
unplugged, scsi_device_purge_requests() -> scsi_req_cancel_async() races
with I/O completion callbacks. Both threads load and store req->aiocb.
This can lead to assert(r->req.aiocb == NULL) failures and undefined
behavior.
Protect r->req.aiocb with the AioContext lock to prevent the race.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230221212218.1378734-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
BlockDriver->bdrv_getlength is categorized as IO callback, and it
currently doesn't run in a coroutine. We should let it take a graph
rdlock since the callback traverses the block nodes graph, which however
is only possible in a coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Because now this function creates a new coroutine and polls, we need to
take the AioContext lock where it is missing, for the only reason that
internally co_wrapper calls AIO_WAIT_WHILE and it expects to release the
AioContext lock.
This is especially messy when a co_wrapper creates a coroutine and polls
in bdrv_open_driver, because this function has so many callers in so
many context that it can easily lead to deadlocks. Therefore the new
rule for bdrv_open_driver is that the caller must always hold the
AioContext lock of the given bs (except if it is a coroutine), because
the function calls bdrv_refresh_total_sectors() which is now a
co_wrapper.
Once the rwlock is ultimated and placed in every place it needs to be,
we will poll using AIO_WAIT_WHILE_UNLOCKED and remove the AioContext
lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is below memleak detected when to quit the qemu-system-x86_64 (with
vhost-scsi-pci).
(qemu) quit
=================================================================
==15568==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f00aec57917 in __interceptor_calloc (/lib64/libasan.so.6+0xb4917)
#1 0x7f00ada0d7b5 in g_malloc0 (/lib64/libglib-2.0.so.0+0x517b5)
#2 0x5648ffd38bac in vhost_scsi_start ../hw/scsi/vhost-scsi.c:92
#3 0x5648ffd38d52 in vhost_scsi_set_status ../hw/scsi/vhost-scsi.c:131
#4 0x5648ffda340e in virtio_set_status ../hw/virtio/virtio.c:2036
#5 0x5648ff8de281 in virtio_ioport_write ../hw/virtio/virtio-pci.c:431
#6 0x5648ff8deb29 in virtio_pci_config_write ../hw/virtio/virtio-pci.c:576
#7 0x5648ffe5c0c2 in memory_region_write_accessor ../softmmu/memory.c:493
#8 0x5648ffe5c424 in access_with_adjusted_size ../softmmu/memory.c:555
#9 0x5648ffe6428f in memory_region_dispatch_write ../softmmu/memory.c:1515
#10 0x5648ffe8613d in flatview_write_continue ../softmmu/physmem.c:2825
#11 0x5648ffe86490 in flatview_write ../softmmu/physmem.c:2867
#12 0x5648ffe86d9f in address_space_write ../softmmu/physmem.c:2963
#13 0x5648ffe86e57 in address_space_rw ../softmmu/physmem.c:2973
#14 0x5648fffbfb3d in kvm_handle_io ../accel/kvm/kvm-all.c:2639
#15 0x5648fffc0e0d in kvm_cpu_exec ../accel/kvm/kvm-all.c:2890
#16 0x5648fffc90a7 in kvm_vcpu_thread_fn ../accel/kvm/kvm-accel-ops.c:51
#17 0x56490042400a in qemu_thread_start ../util/qemu-thread-posix.c:505
#18 0x7f00ac3b6ea4 in start_thread (/lib64/libpthread.so.0+0x7ea4)
Free the vsc->inflight at the 'stop' path.
Fixes: b82526c7ee ("vhost-scsi: support inflight io track")
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Li Feng <fengli@smartx.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Message-Id: <20230104160433.21353-1-dongli.zhang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIDeviceClass and PCIDevice are defined in pci.h. Many users of the
header don't actually need them. Similar structs live in their own
headers: PCIBusClass and PCIBus in pci_bus.h, PCIBridge in
pci_bridge.h, PCIHostBridgeClass and PCIHostState in pci_host.h,
PCIExpressHost in pcie_host.h, and PCIERootPortClass, PCIEPort, and
PCIESlot in pcie_port.h.
Move PCIDeviceClass and PCIDeviceClass to new pci_device.h, along with
the code that needs them. Adjust include directives.
This also enables the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-6-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/pci/pci_bridge.h and hw/cxl/cxl.h include each other.
Fortunately, breaking the loop is merely a matter of deleting
unnecessary includes from headers, and adding them back in places
where they are now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221222100330.380143-2-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 02b61f38d3 ("hw/virtio: incorporate backend features in features")
properly negotiates VHOST_USER_F_PROTOCOL_FEATURES with the vhost-user
backend, but we forgot to enable vrings as specified in
docs/interop/vhost-user.rst:
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has not been negotiated, the
ring starts directly in the enabled state.
If ``VHOST_USER_F_PROTOCOL_FEATURES`` has been negotiated, the ring is
initialized in a disabled state and is enabled by
``VHOST_USER_SET_VRING_ENABLE`` with parameter 1.
Some vhost-user front-ends already did this by calling
vhost_ops.vhost_set_vring_enable() directly:
- backends/cryptodev-vhost.c
- hw/net/virtio-net.c
- hw/virtio/vhost-user-gpio.c
But most didn't do that, so we would leave the vrings disabled and some
backends would not work. We observed this issue with the rust version of
virtiofsd [1], which uses the event loop [2] provided by the
vhost-user-backend crate where requests are not processed if vring is
not enabled.
Let's fix this issue by enabling the vrings in vhost_dev_start() for
vhost-user front-ends that don't already do this directly. Same thing
also in vhost_dev_stop() where we disable vrings.
[1] https://gitlab.com/virtio-fs/virtiofsd
[2] https://github.com/rust-vmm/vhost/blob/240fc2966/crates/vhost-user-backend/src/event_loop.rs#L217
Fixes: 02b61f38d3 ("hw/virtio: incorporate backend features in features")
Reported-by: German Maglione <gmaglione@redhat.com>
Tested-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20221123131630.52020-1-sgarzare@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20221130112439.2527228-3-alex.bennee@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Those typos are in files which are used to generate the QEMU manual.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221110190825.879620-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[thuth: update sentence in can.rst as suggested by Peter]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently the vwm_pvscsi controller resets individual SCSI devices
with the device_legacy_reset() function. The only difference between
this and device_cold_reset() is that device_legacy_reset() resets the
device but not any child qbuses it might have.
In this case, no SCSI device has a child qbus, so the functions have
the same behaviour. Switch to device_cold_reset() to move away from
using the deprecated function, and bring this SCSI controller in to
line with what all the others do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221013160623.1296109-3-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the SCSI subsystem we currently use the legacy functions
qdev_reset_all() and qbus_reset_all(). These perform a recursive
reset, starting from either a qbus or a qdev. However they do not
permit any of the devices in the tree to use three-phase reset,
because device reset goes through the device_legacy_reset() function
that only calls the single DeviceClass::reset method.
Switch to using the device_cold_reset() and bus_cold_reset()
functions. These also perform a recursive reset, where first the
children are reset and then finally the parent, but they use the new
(...in 2020...) Resettable mechanism, which supports both the old
style single-reset method and also the new 3-phase reset handling.
Since no devices attached to SCSI buses currently try to use 3-phase
reset, this should be a no-behaviour-change commit which just reduces
the use of a deprecated API.
Commit created with:
sed -i -e 's/qdev_reset_all/device_cold_reset/g;s/qbus_reset_all/bus_cold_reset/g' hw/scsi/*.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221013160623.1296109-2-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Section 5.6.6.3 of VirtIO specification states, "Events will also
be reported via sense codes..." However, no sense data is sent when
VIRTIO_SCSI_EVT_RESET_RESCAN or VIRTIO_SCSI_EVT_RESET_REMOVED events
are reported (when disk hotplug/hotunplug events occur). SCSI layer
on Solaris depends on this sense data, and hence does not handle disk
hotplug/hotunplug events.
When the disk inventory changes, use the bus unit attention mechanism
to return a CHECK_CONDITION status with sense data of 0x06/0x3F/0x0E
(sense code REPORTED_LUNS_CHANGED). The first device on the bus to
execute a command successfully will report and consume the unit
attention status.
Signed-off-by: Venu Busireddy <venu.busireddy@oracle.com>
Message-Id: <20221006194946.24134-1-venu.busireddy@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SunOS expects CD-ROM devices to have a block size of 512, and will
fail to mount or install using QEMU's default block size of 2048.
When initializing the SCSI device, allow the `physical_block_size'
block device option to override the default block size.
Signed-off-by: John Millikin <john@john-millikin.com>
Message-Id: <20220804122950.1577012-1-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The `started` field is manipulated internally within the vhost code
except for one place, vhost-user-blk via f5b22d06fb (vhost: recheck
dev state in the vhost_migration_log routine). Mark that as a FIXME
because it introduces a potential race. I think the referenced fix
should be tracking its state locally.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220802095010.3330793-12-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwittz@nutanix.com>
In scsi_req_parse_cdb(), if the CDB length implied by the command type
exceeds the initialized portion of the command buffer, reject the request.
Rejected requests are recorded by the `scsi_req_parse_bad` trace event.
On example of a bug detected by this check is SunOS's use of interleaved
DMA and non-DMA commands. This guest behavior currently causes QEMU to
parse uninitialized memory as a SCSI command, with unpredictable
outcomes.
With the new check in place:
* QEMU consistently creates a trace event and rejects the request.
* SunOS retries the request(s) and is able to successfully boot from
disk.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-2-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a SCSI command is received from the guest, the CDB length implied
by the first byte might exceed the number of bytes the guest sent. In
this case scsi_req_new() will read uninitialized data, causing
unpredictable behavior.
Adds the buf_len parameter to scsi_req_new() and plumbs it through the
call stack.
Signed-off-by: John Millikin <john@john-millikin.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053458.698416-1-john@john-millikin.com>
[Fill in correct length for adapters other than ESP. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per investigation on the linked ticket, SunOS issues a SCSI bus reset
to the ESP as part of its boot sequence. If this ESP command doesn't
cause devices to assert sense flag UNIT ATTENTION, SunOS will consider
the CD-ROM device to be non-compliant with Common Command Set (CCS).
In this condition, the SunOS installer's early userspace doesn't set
the installation source location to sr0 and the miniroot copy fails.
Signed-off-by: John Millikin <john@john-millikin.com>
Suggested-by: Bill Paul <noisetube@gmail.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053846.699310-1-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commits 01ef8185b8 amd 24b36e9813 updated the way that the maximum
transfer length is calculated for patching block limits VPD page in an
INQUIRY response.
The same updates also need to be made for the case where the host device
does not support the block limits VPD page at all and we emulate the
whole page.
Without this fix, on host block devices a maximum transfer length of
(INT_MAX - sector_size) bytes is advertised to the guest, resulting in
I/O errors when a request that exceeds the host limits is made by the
guest. (Prior to commit 24b36e9813, this code path would use the
max_transfer value from the host instead of INT_MAX, but still miss the
fix from 01ef8185b8 where max_transfer is also capped to max_iov
host pages, so it would be less wrong, but still wrong.)
Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2096251
Fixes: 01ef8185b8
Fixes: 24b36e9813
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220822125320.48257-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As soon as virtio_scsi_data_plane_start() attaches host notifiers the
IOThread may start virtqueue processing. There is a race between
IOThread virtqueue processing and virtio_scsi_data_plane_start() because
it only assigns s->dataplane_started after attaching host notifiers.
When a virtqueue handler function in the IOThread calls
virtio_scsi_defer_to_dataplane() it may see !s->dataplane_started and
attempt to start dataplane even though we're already in the IOThread:
#0 0x00007f67b360857c __pthread_kill_implementation (libc.so.6 + 0xa257c)
#1 0x00007f67b35bbd56 raise (libc.so.6 + 0x55d56)
#2 0x00007f67b358e833 abort (libc.so.6 + 0x28833)
#3 0x00007f67b358e75b __assert_fail_base.cold (libc.so.6 + 0x2875b)
#4 0x00007f67b35b4cd6 __assert_fail (libc.so.6 + 0x4ecd6)
#5 0x000055ca87fd411b memory_region_transaction_commit (qemu-kvm + 0x67511b)
#6 0x000055ca87e17811 virtio_pci_ioeventfd_assign (qemu-kvm + 0x4b8811)
#7 0x000055ca87e14836 virtio_bus_set_host_notifier (qemu-kvm + 0x4b5836)
#8 0x000055ca87f8e14e virtio_scsi_set_host_notifier (qemu-kvm + 0x62f14e)
#9 0x000055ca87f8dd62 virtio_scsi_dataplane_start (qemu-kvm + 0x62ed62)
#10 0x000055ca87e14610 virtio_bus_start_ioeventfd (qemu-kvm + 0x4b5610)
#11 0x000055ca87f8c29a virtio_scsi_handle_ctrl (qemu-kvm + 0x62d29a)
#12 0x000055ca87fa5902 virtio_queue_host_notifier_read (qemu-kvm + 0x646902)
#13 0x000055ca882c099e aio_dispatch_handler (qemu-kvm + 0x96199e)
#14 0x000055ca882c1761 aio_poll (qemu-kvm + 0x962761)
#15 0x000055ca880e1052 iothread_run (qemu-kvm + 0x782052)
#16 0x000055ca882c562a qemu_thread_start (qemu-kvm + 0x96662a)
This patch assigns s->dataplane_started before attaching host notifiers
so that virtqueue handler functions that run in the IOThread before
virtio_scsi_data_plane_start() returns correctly identify that dataplane
does not need to be started. This fix is taken from the virtio-blk
dataplane code and it's worth adding a comment in virtio-blk as well to
explain why it works.
Note that s->dataplane_started does not need the AioContext lock because
it is set before attaching host notifiers and cleared after detaching
host notifiers. In other words, the IOThread always sees the value true
and the main loop thread does not modify it while the IOThread is
active.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2099541
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220808162134.240405-1-stefanha@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The existing code assumes that the block size can be generated from p[1] << 8
in multiple places which ignores the top and bottom 8 bits. If the block size
is allowed to be set to an arbitrary value then this causes a mismatch
between the value written by the guest in the block descriptor and the value
subsequently read back using READ CAPACITY causing the guest to generate
requests that can crash QEMU.
For now restrict block size changes to bits 8-15 and also ignore requests to
set the block size to 0 which causes the SCSI emulation to crash in at least
one place with a divide by zero error.
Fixes: 356c4c441e ("scsi-disk: allow MODE SELECT block descriptor to set the block size")
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1112
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220730122656.253448-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In scsi_disk_emulate_write_same() the number of host sectors to transfer is
calculated as (s->qdev.blocksize / BDRV_SECTOR_SIZE) which is then used to
copy data in block size chunks to the iov buffer.
Since the loop copying the data to the iov buffer uses a fixed increment of
s->qdev.blocksize then using a block size that isn't a multiple of
BDRV_SECTOR_SIZE introduces a rounding error in the iov buffer size calculation
such that the iov buffer copy overflows the space allocated.
Update the iov buffer copy for() loop so that it will use the smallest of either
the current block size or the remaining transfer count to prevent the overflow.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220730122656.253448-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The MODE SELECT command can contain an optional block descriptor that can be used
to set the device block size. If the block descriptor is present then update the
block size on the SCSI device accordingly.
This allows CDROMs to be used with A/UX which requires a CDROM drive which is
capable of switching from a 2048 byte sector size to a 512 byte sector size.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A/UX sends a MODE_PAGE_R_W_ERROR command with the AWRE bit set to 0 when enumerating
CDROM drives. Since the bit is currently hardcoded to 1 then indicate that the AWRE
bit can be changed (even though we don't care about the value) so that
the MODE_PAGE_R_W_ERROR page can be set successfully.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When A/UX configures the CDROM device it sends a truncated MODE SELECT request
for page 1 (MODE_PAGE_R_W_ERROR) which is only 6 bytes in length rather than
10. This seems to be due to bug in Apple's code which calculates the CDB message
length incorrectly.
The work at [1] suggests that this truncated request is accepted on real
hardware whereas in QEMU it generates an INVALID_PARAM_LEN sense code which
causes A/UX to get stuck in a loop retrying the command in an attempt to succeed.
Alter the mode page request length check so that truncated requests are allowed
if the SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk is enabled, whilst also adding a
trace event to enable the condition to be detected.
[1] https://68kmla.org/bb/index.php?threads/scsi2sd-project-anyone-interested.29040/page-7#post-316444
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When initialising a drive ready to install MacOS, Apple HD SC Setup first attempts
to format the drive. Add a simple FORMAT UNIT command which simply returns success
to allow the format to succeed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220622105314.802852-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both MacOS and A/UX make use of vendor-specific MODE SELECT commands with PF=0
to identify SCSI devices:
- MacOS sends a MODE SELECT command with PF=0 for the MODE_PAGE_VENDOR_SPECIFIC
(0x0) mode page containing 2 bytes before initialising a disk
- A/UX (installed on disk) sends a MODE SELECT command with PF=0 during SCSI
bus enumeration, and gets stuck in an infinite loop if it fails
Add a new SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk to allow both
PF=0 MODE SELECT commands and implement a MODE_PAGE_VENDOR_SPECIFIC (0x0)
mode page which is compatible with MacOS.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During SCSI bus enumeration A/UX sends a MODE SENSE command to the CDROM with
the DBD bit unset and expects the response to include a block descriptor. As per
the latest SCSI documentation, QEMU currently force-disables the block
descriptor for CDROM devices but the A/UX driver expects the requested block
descriptor to be returned.
If the block descriptor is not returned in the response then A/UX becomes
confused, since the block descriptor returned in the MODE SENSE response is
used to generate a subsequent MODE SELECT command which is then invalid.
Add a new SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk to allow this behaviour
to be enabled as required. Note that an additional workaround is required for
the previous SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR quirk which must never
return a block descriptor even though the DBD bit is left unset.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One of the mechanisms MacOS uses to identify CDROM drives compatible with MacOS
is to send a custom MODE SELECT command for page 0x30 to the drive. The
response to this is a hard-coded manufacturer string which must match in order
for the CDROM to be usable within MacOS.
Add an implementation of the MODE SELECT page 0x30 response guarded by a newly
defined SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR quirk bit so that CDROM drives
attached to non-Apple machines function exactly as before.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the MacOS SCSI implementation is quite old (and Apple added some firmware
customisations to their drives for m68k Macs) there is need to add a mechanism
to correctly handle Apple-specific quirks.
Add a new quirks bitmap to SCSIDiskState that can be used to enable these
features as required.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set current_req to NULL, not current_req->req, to prevent reusing a free'd
buffer in case of repeated SCSI cancel requests. Also apply the fix to
CLEAR QUEUE and BUS DEVICE RESET messages as well, since they also cancel
the request.
Thanks to Alexander Bulekov for providing a reproducer.
Fixes: CVE-2022-0216
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220711123316.421279-1-mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set current_req->req to NULL to prevent reusing a free'd buffer in case of
repeated SCSI cancel requests. Thanks to Thomas Huth for suggesting the patch.
Fixes: CVE-2022-0216
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220705200543.2366809-1-mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inspired by Julia Lawall's fixing of Linux
kernel comments, I looked at qemu, although I did it manually.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-2-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 1b7fd72955 ("block: rename buffer_alignment to
guest_block_size") noted:
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
The last time the value of buffer_alignment/guest_block_size was
actually used was before commit 339064d506 ("block: Don't use guest
sector size for qemu_blockalign()").
This value has not been used since 2013. Get rid of it.
Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220518130945.2657905-1-stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
=LXG0
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes,cleanups,features
more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
hw/vhost-user-scsi|blk: set `supports_config` flag correctly
hw/virtio/vhost-user: don't use uninitialized variable
tests/acpi: virt: update golden masters for VIOT
hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
tests/acpi: virt: allow VIOT acpi table changes
hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
hw/cxl: Fix missing write mask for HDM decoder target list registers
pci: fix overflow in snprintf string formatting
hw/machine: Drop cxl_supported flag as no longer useful
hw/cxl: Move the CXLState from MachineState to machine type specific state.
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
tests/acpi: Allow modification of q35 CXL CEDT table.
hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
hw/cxl: Make the CXL fixed memory window setup a machine parameter.
x86: acpi-build: do not include hw/isa/isa.h directly
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently vhost-user-scsi driver doesn't allow to change
the configuration space of virtio_scsi, while vhost-user-blk
support that, so here we set the flag in vhost-user-blk driver
and unset it in vhost-user-scsi.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Message-Id: <20220525125540.50979-2-changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'. Standardize on the
latter.
Change produced with:
sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)
and then hand-undoing the instance in linux-headers/linux/kvm.h.
Most of these changes are in comments or documentation; the
exceptions are:
* a local variable in accel/hvf/hvf-accel-ops.c
* a local variable in accel/kvm/kvm-all.c
* the PMCR_WRITABLE_MASK macro in target/arm/internals.h
* the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
(which is never used anywhere)
* the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
(which is never used anywhere)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.
Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch drops the name parameter for the virtio_init function.
The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.
This patch lets us do this and removes the need for the name
parameter in the virtio_init function.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.
Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.
Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no longer a need to expose the request and related APIs in
virtio-scsi.h since there are no callers outside virtio-scsi.c.
Note the block comment in VirtIOSCSIReq has been adjusted to meet the
coding style.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_cmd_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_ctrl_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_scsi_handle_event_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio-scsi event virtqueue is not emptied by its handler function.
This is typical for rx virtqueues where the device uses buffers when
some event occurs (e.g. a packet is received, an error condition
happens, etc).
Polling non-empty virtqueues wastes CPU cycles. We are not waiting for
new buffers to become available, we are waiting for an event to occur,
so it's a misuse of CPU resources to poll for buffers.
Introduce the new virtio_queue_aio_attach_host_notifier_no_poll() API,
which is identical to virtio_queue_aio_attach_host_notifier() except
that it does not poll the virtqueue.
Before this patch the following command-line consumed 100% CPU in the
IOThread polling and calling virtio_scsi_handle_event():
$ qemu-system-x86_64 -M accel=kvm -m 1G -cpu host \
--object iothread,id=iothread0 \
--device virtio-scsi-pci,iothread=iothread0 \
--blockdev file,filename=test.img,aio=native,cache.direct=on,node-name=drive0 \
--device scsi-hd,drive=drive0
After this patch CPU is no longer wasted.
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20220427143541.119567-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit f34e8d8b8d ("virtio-scsi: prepare
virtio_scsi_handle_cmd for dataplane") prepared the virtio-scsi cmd
virtqueue handler function to be used in both the dataplane and
non-datpalane code paths.
It failed to convert the ctrl and event virtqueue handler functions,
which are not designed to be called from the dataplane code path but
will be since the ioeventfd is set up for those virtqueues when
dataplane starts.
Convert the ctrl and event virtqueue handler functions now so they
operate correctly when called from the dataplane code path. Avoid code
duplication by extracting this code into a helper function.
Fixes: f34e8d8b8d ("virtio-scsi: prepare virtio_scsi_handle_cmd for dataplane")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-2-stefanha@redhat.com
[Fixed s/by used/be used/ typo pointed out by Michael Tokarev
<mjt@tls.msk.ru>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features. Compute their default value in Kconfig to
obtain the more intuitive behavior.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"0x%u" format is very misleading, replace by "0x%x".
Found running:
$ git grep -E '0x%[0-9]*([lL]*|" ?PRI)[dDuU]' hw/
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220323114718.58714-3-philippe.mathieu.daude@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since PDMA reads/writes are driven by the guest, it is possible that migration
can occur whilst a SCSIRequest is still active. Fortunately active SCSIRequests
are already included in the migration stream and restarted post migration but
this still leaves the reference in ESPState uninitialised.
Implement the SCSIBusInfo .load_request callback to obtain a reference to the
currently active SCSIRequest and use it to recreate ESPState current_req
after migration.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This involves (re)adding a PDMA-specific subsection to hold the reference to the
current PDMA callback.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This prepares for the inclusion of the current PDMA callback in the migration
stream since the callback is referenced by an integer instead of a function
pointer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is to be used to execute the current PDMA callback rather than
dereferencing the ESPState pdma_cb function pointer directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This function is to be used to set the current PDMA callback rather than
accessing the ESPState pdma_cb function pointer directly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
The "hardware version" machinery (qemu_set_hw_version(),
qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer
than 10 files. Move it out from osdep.h into a new
qemu/hw-version.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.
This commit was created with:
git grep -z -l 'static TypeInfo' -- '*.c' | \
xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
-----BEGIN PGP SIGNATURE-----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=F/ek
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging
Migration Pull request (Take 2)
Hi
This time I have disabled vmstate canary patches form Dave Gilbert.
Let's see if it works.
Later, Juan.
# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
migration: Move temp page setup and cleanup into separate functions
migration: Simplify unqueue_page()
migration: Add postcopy_has_request()
migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
migration: No off-by-one for pss->page update in host page size
migration: Tally pre-copy, downtime and post-copy bytes independently
migration: Introduce ram_transferred_add()
migration: Don't return for postcopy_send_discard_bm_ram()
migration: Drop return code for disgard ram process
migration: Do chunk page in postcopy_each_ram_send_discard()
migration: Drop postcopy_chunk_hostpages()
migration: Don't return for postcopy_chunk_hostpages()
migration: Drop dead code of ram_debug_dump_bitmap()
migration/ram: clean up unused comment.
migration: Report the error returned when save_live_iterate fails
migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
migration/migration.c: Avoid COLO boot in postcopy migration
migration/migration.c: Add missed default error handler for migration state
Remove unnecessary minimum_version_id_old fields
multifd: Rename pages_used to normal_pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.
Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.
The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since commit 292e13142d, dma_buf_rw() returns a MemTxResult type.
Do not discard it, return it to the caller. Pass the previously
returned value (the QEMUSGList residual size, which was rarely used)
as an optional argument.
With this new API, SCSIRequest::residual might now be accessed via
a pointer. Since the size_t type does not have the same size on
32 and 64-bit host architectures, convert it to a uint64_t, which
is big enough to hold the residual size, and the type is constant
on both 32/64-bit hosts.
Update the few dma_buf_read() / dma_buf_write() callers to the new
API.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
Update the obvious places where dma_addr_t should be used
(instead of uint64_t, hwaddr, size_t, int32_t types).
This allows to have &dma_addr_t type portable on 32/64-bit
hosts.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220111184309.28637-11-f4bug@amsat.org>
The 'resid' field is slightly confusing and could be
interpreted as some ID. Rename it as 'residual' which
is clearer to review. No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This code is easier to review using the load/store API.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211218111912.1499377-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now that virtio-blk and virtio-scsi are ready, get rid of
the handle_aio_output() callback. It's no longer needed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Prepare virtio_scsi_handle_cmd() to be used by both dataplane and
non-dataplane by making the condition for starting ioeventfd more
specific. This way it won't trigger when dataplane has already been
started.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtqueue host notifier API
virtio_queue_aio_set_host_notifier_handler() polls the virtqueue for new
buffers. AioContext previously required a bool progress return value
indicating whether an event was handled or not. This is no longer
necessary because the AioContext polling API has been split into a poll
check function and an event handler function. The event handler is only
run when we know there is work to do, so it doesn't return bool.
The VirtIOHandleAIOOutput function signature is now the same as
VirtIOHandleOutput. Get rid of the bool return value.
Further simplifications will be made for virtio-blk and virtio-scsi in
the next patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
vhost_dev_init calls vhost_dev_cleanup on error, which closes vhostfd,
don't double close it.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20211129132358.1110372-2-d-tatianin@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost_dev_init calls vhost_dev_cleanup in case of an error during
initialization, which zeroes out the entire vsc->dev as well as the
vsc->dev.vqs pointer. This prevents us from properly freeing it in free_vqs.
Keep a local copy of the pointer so we can free it later.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20211129132358.1110372-1-d-tatianin@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ld*_dma() returns a MemTxResult type. Do not discard
it, return it to the caller.
Update the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-24-philmd@redhat.com>
Let devices specify transaction attributes when calling ld*_pci_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-22-philmd@redhat.com>
Let devices specify transaction attributes when calling st*_pci_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-21-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_read().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-13-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_buf_write().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-12-philmd@redhat.com>
Let devices specify transaction attributes when calling pci_dma_rw().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-10-philmd@redhat.com>
DMA operations are run on any kind of buffer, not arrays of
uint8_t. Convert dma_buf_read/dma_buf_write functions to take
a void pointer argument and save us pointless casts to uint8_t *.
Remove this pointless casts in the megasas device model.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-9-philmd@redhat.com>
While the reply queue values fit in 16-bit, they are accessed
as 32-bit:
661: s->reply_queue_head = ldl_le_pci_dma(pcid, s->producer_pa);
662: s->reply_queue_head %= MEGASAS_MAX_FRAMES;
663: s->reply_queue_tail = ldl_le_pci_dma(pcid, s->consumer_pa);
664: s->reply_queue_tail %= MEGASAS_MAX_FRAMES;
Having:
41:#define MEGASAS_MAX_FRAMES 2048 /* Firmware limit at 65535 */
In order to update the ld/st*_pci_dma() API to pass the address
of the value to access, it is simpler to have the head/tail declared
as 32-bit values. Replace the uint16_t by uint32_t, wasting 4 bytes in
the MegasasState structure.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-20-philmd@redhat.com>
If we detect an overflow on the SGL buffer, do not
keep processing the command: discard it. TARGET_FAILURE
sense code will be returned (MFI_STAT_SCSI_DONE_WITH_ERROR).
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/521
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20211119201141.532377-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a reset command is sent after data has been transferred into the SCSI buffer
ensure that async_len is reset to 0. Otherwise a subsequent TI command assumes
the SCSI buffer contains data to be transferred to the device causing it to
dereference the stale async_buf pointer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/724
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211118100327.29061-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This avoids an off-by-one read of 'mode_sense_valid' buffer in
hw/scsi/scsi-disk.c:mode_sense_page().
Fixes: CVE-2021-3930
Cc: qemu-stable@nongnu.org
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: a8f4bbe290 ("scsi-disk: store valid mode pages in a table")
Fixes: #546
Reported-by: Qiuhao Li <Qiuhao.Li@outlook.com>
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is currently a check in esp_select() to cancel any in-flight SCSI requests
to ensure that issuing multiple select commands without continuing through the
rest of the ESP state machine ignores all but the last SCSI request. This is
also enforced through the addition of assert()s in esp_transfer_data() and
scsi_read_data().
The get_cmd() function does not call esp_select() when TC == 0 which means it is
possible for a fuzzer to trigger these assert()s by sending a select command when
TC == 0 immediately after a valid SCSI CDB has been submitted.
Since esp_select() is only called from get_cmd(), hoist the check to cancel
in-flight SCSI requests from esp_select() into get_cmd() to ensure it is always
called when executing a select command to initiate a new SCSI request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Closes: https://gitlab.com/qemu-project/qemu/-/issues/662
Closes: https://gitlab.com/qemu-project/qemu/-/issues/663
Message-Id: <20211101183516.8455-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux limits the size of iovecs to 1024 (UIO_MAXIOV in the kernel
sources, IOV_MAX in POSIX). Because of this, on some host adapters
requests with many iovecs are rejected with -EINVAL by the
io_submit() or readv()/writev() system calls.
In fact, the same limit applies to SG_IO as well. To fix both the
EINVAL and the possible performance issues from using fewer iovecs
than allowed by Linux (some HBAs have max_segments as low as 128),
introduce a separate entry in BlockLimits to hold the max_segments
value from sysfs. This new limit is used only for SG_IO and clamped
to bs->bl.max_iov anyway, just like max_hw_transfer is clamped to
bs->bl.max_transfer.
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: qemu-block@nongnu.org
Cc: qemu-stable@nongnu.org
Fixes: 18473467d5 ("file-posix: try BLKSECTGET on block devices too, do not round to power of 2", 2021-06-25)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210923130436.1187591-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
The function scsi_bus_new() creates a new SCSI bus; callers can
either pass in a name argument to specify the name of the new bus, or
they can pass in NULL to allow the bus to be given an automatically
generated unique name. Almost all callers want to use the
autogenerated name; the only exception is the virtio-scsi device.
Taking a name argument that should almost always be NULL is an
easy-to-misuse API design -- it encourages callers to think perhaps
they should pass in some standard name like "scsi" or "scsi-bus". We
don't do this anywhere for SCSI, but we do (incorrectly) do it for
other bus types such as i2c.
The function name also implies that it will return a newly allocated
object, when it in fact does in-place allocation. We more commonly
name such functions foo_init(), with foo_new() being the
allocate-and-return variant.
Replace all the scsi_bus_new() callsites with either:
* scsi_bus_init() for the usual case where the caller wants
an autogenerated bus name
* scsi_bus_init_named() for the rare case where the caller
needs to specify the bus name
and document that for the _named() version it's then the caller's
responsibility to think about uniqueness of bus names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210923121153.23754-2-peter.maydell@linaro.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-6-armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
The device model batching its ioeventfds in a single MR transaction is
an optimization. Clarify this in virtio-scsi, virtio-blk and generic
virtio code. Also clarify that the transaction must commit before
closing ioeventfds so that no one is tempted to merge the loops
in the start functions error path and in the stop functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <162125799728.1394228.339855768563326832.stgit@bahia.lan>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows callers to return better error messages instead of making
one up while the real error ends up on stderr. Most callers can
immediately make use of this because they already have an Error
parameter themselves. The others just keep printing the error with
error_report_err().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-2-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.
In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed. Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size. max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I/O to a disk via read/write is not limited by the number of segments allowed
by the host adapter; the kernel can split requests if needed, and the limit
imposed by the host adapter can be very low (256k or so) to avoid that SG_IO
returns EINVAL if memory is heavily fragmented.
Since this value is only interesting for SG_IO-based I/O, do not include
it in the max_transfer and only take it into account when patching the
block limits VPD page in the scsi-generic device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The LUN is selected with an IDENTIFY message, and persists
until the next message out phase. Instead of passing it to
do_busid_cmd, store it in ESPState. Because do_cmd can simply
skip the message out phase if cmdfifo_cdb_offset is zero, it
can now be used for the S without ATN cases as well.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 4e78f3bf35 "esp: defer command completion interrupt on incoming data
transfers" added a version check for use with VMSTATE_*_TEST macros to allow
migration from older QEMU versions. Unfortunately the version check fails to
work in its current form since if the VMStateDescription version_id is
incremented, the test returns false and so the fields are not included in the
outgoing migration stream.
Change the version check to use >= rather == to ensure that migration works
correctly when the ESPState VMStateDescription has version_id > 5.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 4e78f3bf35 ("esp: defer command completion interrupt on incoming data transfers")
Message-Id: <20210613102614.5438-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 799d90d818 "esp: transition to message out phase after SATN and stop
command" added logic to correctly handle extended messages for DMA requests
but not for PDMA requests.
Apply the same logic in esp_do_dma() to do_dma_pdma_cb() so that extended
messages terminated with a PDMA request are accumulated correctly. This allows
the ESP device to respond correctly to the SDTR negotiation initiated by the
NetBSD ESP driver without causing errors and timeouts on boot.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-6-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit from nearly 10 years ago is now broken due to the improvements
in esp emulation (or perhaps was never correct). It shows up as a bug
in detecting the CDROM drive under MacOS. The error is caused by the
MacOS CDROM driver sending this CDB with an "S without ATN" command and
without DMA:
0x12 0x00 0x00 0x00 0x05 0x00 (INQUIRY)
This is a valid INQUIRY command, however with this logic present the 3rd
byte (0x0) is copied over the 1st byte (0x12) which silently converts the
INQUIRY command to a TEST UNIT READY command before passing it to the
QEMU SCSI layer. Since the TEST UNIT READY command has a zero length
response the MacOS CDROM driver never receives a response and assumes
the CDROM is not present.
The logic was to ignore the IDENTIFY byte and copy the LUN over from
the CDB, which did store the LUN in bits 5-7 of the second byte in
olden times. This however is all obsolete, so just drop the code.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-5-mark.cave-ayland@ilande.co.uk>
[Tweaked commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After each PDMA write transfer the MacOS CDROM driver waits until the FIFO is empty
(i.e. its contents have been written out to the SCSI bus) by polling the FIFO count
register until it reads 0. This doesn't work with the current PDMA write
implementation which waits until either the FIFO is full or the transfer is complete
before invoking the PDMA callback to process the FIFO contents.
Change the PDMA write transfer logic so that the PDMA callback is invoked after each
PDMA write to transfer the FIFO contents to the target buffer immediately, and hence
avoid getting stuck in the FIFO count register polling loop.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-4-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The initial implementation of non-DMA transfers was based upon analysis of traces
from the MacOS toolbox ROM for handling unaligned reads but missed one key
aspect - during a non-DMA transfer from the target, the bus service interrupt
should be raised for every single byte received from the bus and not just at either
the end of the transfer or when the FIFO is full.
Adjust the non-DMA code accordingly so that esp_do_nodma() is called for every byte
received from the target. This also includes special handling for managing the change
from DATA IN to STATUS phase as this needs to occur when the final byte is read out
from the FIFO, and not at the end of the transfer of the last byte into the FIFO.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The current implementation only resumes DMA transfers when incoming data is
received from the target device, but this is also required for non-DMA transfers
with the next set of non-DMA changes.
Rather than duplicate the DMA/non-DMA dispatch logic in the initial transfer
section, update the code so that the initial transfer section can just
fallthrough to the main DMA/non-DMA dispatch logic.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20210519100803.10293-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When processing a command to select a target and send a CDB, the ESP device
maintains a sequence step register so that if an error occurs the host can
determine which part of the selection/CDB submission sequence failed.
The old Linux 2.6 driver is really pedantic here: it checks the sequence step
register even if a command succeeds and complains loudly on the console if the
sequence step register doesn't match the expected bus phase and interrupt flags.
This reason this mismatch occurs is because the ESP emulation currently doesn't
update the bus phase until the next TI (Transfer Information) command and so the
cleared sequence step register is considered invalid for the stale bus phase.
Normally this isn't an issue as the host only checks the sequence step register
if an error occurs but the old Linux 2.6 driver does this in several places
causing a large stream of "esp0: STEP_ASEL for tgt 0" messages to appear on the
console during the boot process.
Fix this by not clearing the sequence step register when reading the interrupt
register and clearing the DMA status, so the guest sees a valid sequence step
and bus phase combination at the end of the command phase. No other change is
required since the sequence step register is correctly updated throughout the
selection/CDB submission sequence once one of the select commands is issued.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: 1b9e48a5bd ("esp: implement non-DMA transfers in PDMA mode")
Message-Id: <20210518212511.21688-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The datasheet sequence tables confirm that when a target selection fails, only
the INTR_DC interrupt flag should be asserted.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Fixes: cf47a41e05 ("esp: latch individual bits in ESP_RINTR register")
Message-Id: <20210518212511.21688-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When the device doesn't support the VPD block limits page, we emulate it even
for SCSI passthrough.
As a part of the emulation we need to add it to the 'Supported VPD Pages'
The code that does this adds it to the page, but it doesn't increase the length
of the data to be copied to the guest, thus the guest never sees the VPD block
limits page as supported.
Bump the transfer size by 1 in this case.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201217165612.942849-6-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
check_lba_range expects sectors to be expressed in original qdev blocksize, but
scsi_unmap_complete_noio was translating them to 512 block sizes, which was
causing sense errors in the larger LBAs in devices using a 4k block size.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/345
Signed-off-by: Kit Westneat <kit.westneat@gmail.com>
Message-Id: <20210521142829.326217-1-kit.westneat@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
This allows the virtio-scsi-pci device to batch the setup of all its
host notifiers. This significantly improves boot time of VMs with a
high number of vCPUs, e.g. from 6m5.563s down to 1m2.884s for a
pseries machine with 384 vCPUs.
Note that memory_region_transaction_commit() must be called before
virtio_bus_cleanup_host_notifier() because the latter might close
ioeventfds that the transaction still assumes to be around when it
commits.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-5-groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Host notifiers are guaranteed to be idle until the callbacks are
hooked up with virtio_queue_aio_set_host_notifier_handler(). They
thus don't need to be set or unset with the AioContext lock held.
Do this outside the critical section, like virtio-blk already
does : basically downgrading virtio_scsi_vring_init() to only
setup the host notifier and set the callback in the caller.
This will allow to batch addition/deletion of ioeventds in
a single memory transaction, which is expected to greatly
improve initialization time.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-4-groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While processing SCSI i/o requests in mptsas_process_scsi_io_request(),
the Megaraid emulator appends new MPTSASRequest object 'req' to
the 's->pending' queue. In case of an error, this same object gets
dequeued in mptsas_free_request() only if SCSIRequest object
'req->sreq' is initialised. This may lead to a use-after-free issue.
Since s->pending is actually not used, simply remove it from
MPTSASState.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: Cheolwoo Myung <cwmyung@snu.ac.kr>
Message-id: 20210419134247.1467982-1-f4bug@amsat.org
Message-Id: <20210416102243.1293871-1-mjt@msgid.tls.msk.ru>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Cheolwoo Myung <cwmyung@snu.ac.kr>
BugLink: https://bugs.launchpad.net/qemu/+bug/1914236 (CVE-2021-3392)
Fixes: e351b82611 ("hw: Add support for LSI SAS1068 (mptsas) device")
[PMD: Reworded description, added more tags]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a CDB has been received and is about to be submitted to the SCSI layer
via one of the ESP select commands, ensure that do_cmd is set to zero before
executing the command.
Otherwise a guest executing 2 valid CDBs in quick sequence can invoke the SCSI
.transfer_data callback again before do_cmd is set to zero by the callback
function triggering an assert at the start of esp_transfer_data().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210407195801.685-12-mark.cave-ayland@ilande.co.uk>
Instead let the SCSI layer invoke the .cancel callback itself to cancel and
reset the request state.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210407195801.685-11-mark.cave-ayland@ilande.co.uk>
If a guest transfers the message out/command phase data using DMA with a TC
that is larger than the cmdfifo size then the cmdfifo overflows triggering
an assert. Limit the size of the transfer to the free space available in
cmdfifo.
Buglink: https://bugs.launchpad.net/qemu/+bug/1919036
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-10-mark.cave-ayland@ilande.co.uk>
If the guest tries to read a CDB using DMA and cmdfifo is not empty then it is
possible to overflow cmdfifo.
Since this can only occur by issuing deliberately incorrect instruction
sequences, ensure that the maximum length of the CDB transferred to cmdfifo is
limited to the available free space within cmdfifo.
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-9-mark.cave-ayland@ilande.co.uk>
If the guest tries to execute a CDB when cmdfifo is not empty before the start
of the message out phase then clearing the message out phase data will cause
cmdfifo to underflow due to cmdfifo_cdb_offset being larger than the amount of
data within.
Since this can only occur by issuing deliberately incorrect instruction
sequences, ensure that the maximum length of esp_fifo_pop_buf() is limited to
the size of the data within cmdfifo.
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-8-mark.cave-ayland@ilande.co.uk>
When about to execute a SCSI command, ensure that cmdfifo is not empty and
current_dev is non-NULL. This can happen if the guest tries to execute a TI
(Transfer Information) command without issuing one of the select commands
first.
Buglink: https://bugs.launchpad.net/qemu/+bug/1910723
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-7-mark.cave-ayland@ilande.co.uk>
The const pointer returned by fifo8_pop_buf() lies directly within the array used
to model the FIFO. Building with address sanitizers enabled shows that if the
caller expects a minimum number of bytes present then if the FIFO is nearly full,
the caller may unexpectedly access past the end of the array.
Introduce esp_fifo_pop_buf() which takes a destination buffer and performs a
memcpy() in it to guarantee that the caller cannot overwrite the FIFO array and
update all callers to use it. Similarly add underflow protection similar to
esp_fifo_push() and esp_fifo_pop() so that instead of triggering an assert()
the operation becomes a no-op.
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210407195801.685-6-mark.cave-ayland@ilande.co.uk>
Each FIFO currently has its own pop functions with the only difference being
the capacity check. The original reason for this was that the fifo8
implementation doesn't have a formal API for retrieving the FIFO capacity,
however there are multiple examples within QEMU where the capacity field is
accessed directly.
Change esp_fifo_pop() to access the FIFO capacity directly and then consolidate
esp_cmdfifo_pop() into esp_fifo_pop().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-5-mark.cave-ayland@ilande.co.uk>
Each FIFO currently has its own push functions with the only difference being
the capacity check. The original reason for this was that the fifo8
implementation doesn't have a formal API for retrieving the FIFO capacity,
however there are multiple examples within QEMU where the capacity field is
accessed directly.
Change esp_fifo_push() to access the FIFO capacity directly and then consolidate
esp_cmdfifo_push() into esp_fifo_push().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-4-mark.cave-ayland@ilande.co.uk>
The code for write_response() has always used the FIFO to store the data for
the status/message in phases, even for DMA transactions. Switch to using a
separate buffer that can be used directly for DMA transactions and restrict
the FIFO use to the non-DMA case.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210407195801.685-3-mark.cave-ayland@ilande.co.uk>
After issuing a SCSI command the SCSI layer can call the SCSIBusInfo .cancel
callback which resets both current_req and current_dev to NULL. If any data
is left in the transfer buffer (async_len != 0) then the next TI (Transfer
Information) command will attempt to reference the NULL pointer causing a
segfault.
Buglink: https://bugs.launchpad.net/qemu/+bug/1910723
Buglink: https://bugs.launchpad.net/qemu/+bug/1909247
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20210407195801.685-2-mark.cave-ayland@ilande.co.uk>
If QEMU is launched with the -S option then the ESPState mig_version_id property
is left unset due to the ordering of the VMState fields in the VMStateDescription
for sysbusespscsi and pciespscsi. If the VM is migrated and restored in this
stopped state, the version tests in the vmstate_esp VMStateDescription and
esp_post_load() become confused causing the migration to fail.
Fix the ordering problem by moving the setting of mig_version_id to a common
esp_pre_save() function which is invoked first by both sysbusespscsi and
pciespscsi rather than at the point where ESPState is itself serialised into the
migration stream.
Buglink: https://bugs.launchpad.net/qemu/+bug/1922611
Fixes: 0bd005be78 ("esp: add vmstate_esp version to embedded ESPState")
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210407124842.32695-1-mark.cave-ayland@ilande.co.uk>
The 'scsi-hd' and 'scsi-cd' devices provide suitable alternatives.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
On Fedora 33, gcc 10.2.1 notes that scsi_cdb_length(buf) can set
len==-1, which in turn overflows g_malloc():
[5/5] Linking target qemu-system-x86_64
In function ‘scsi_disk_new_request_dump’,
inlined from ‘scsi_new_request’ at ../hw/scsi/scsi-disk.c:2608:9:
../hw/scsi/scsi-disk.c:2582:19: warning: argument 1 value ‘18446744073709551612’ exceeds maximum object size 9223372036854775807 [-Walloc-size-larger-than=]
2582 | line_buffer = g_malloc(len * 5 + 1);
| ^
Silence it with a decent assertion, since we only convert a buffer to
bytes when we have a valid cdb length.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210209152350.207958-1-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmBEwfEeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfYZYH/AwOuqycV9XI1s3K
valsExtSmcj6oTrFTSyak0U7QL9G5pm40qEHwQkwFwYecaQXfFNMN1Mt4gYpsLai
JNhV29tzWrQtNFepCjvvuJihDY5IC/3NWyrWqYXRNZ5IGMvde3HUcg210bFOC3mf
iOtZ40ZjBspTwG4eJCOLBBDeXVAMkVUjdfqtsq66zGteHsJjNEpso0HLdMvlFkud
QLF4g06h8iFMxwahZYEwY+fKUHphqfZn8INr01ODQIy3nBGVgenKz9DKPw/pg/UD
nfxhuYwftDof65JpYEhClOWas3AztFJ1YyyP/cibwosLBQVphj3R05/kF6VuyuyP
gZjux0w=
=RPt3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210307' into staging
qemu-sparc queue
# gpg: Signature made Sun 07 Mar 2021 12:07:13 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-20210307: (42 commits)
esp: add support for unaligned accesses
esp: implement non-DMA transfers in PDMA mode
esp: add trivial implementation of the ESP_RFLAGS register
esp: convert cmdbuf from array to Fifo8
esp: convert ti_buf from array to Fifo8
esp: transition to message out phase after SATN and stop command
esp: add maxlen parameter to get_cmd()
esp: raise interrupt after every non-DMA byte transferred to the FIFO
esp: remove old deferred command completion mechanism
esp: defer command completion interrupt on incoming data transfers
esp: latch individual bits in ESP_RINTR register
esp: implement FIFO flush command
esp: add 4 byte PDMA read and write transfers
esp: remove pdma_origin from ESPState
esp: use FIFO for PDMA transfers between initiator and device
esp: fix PDMA target selection
esp: rename get_cmd_cb() to esp_select()
esp: remove CMD pdma_origin
esp: use in-built TC to determine PDMA transfer length
esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When the MacOS toolbox ROM transfers data from a target device to an unaligned
memory address, the first/last byte of a 16-bit transfer needs to be handled
separately. This means that the first byte is preloaded into the FIFO before
the transfer, or the last byte remains in the FIFO after the transfer.
The result of this is that the PDMA routines must be updated so that the FIFO
is loaded/unloaded if the last 16-bit word is used (rather than the last byte)
and any remaining byte from a FIFO wraparound is handled correctly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-43-mark.cave-ayland@ilande.co.uk>
The MacOS toolbox ROM uses non-DMA TI commands to handle the first/last byte
of an unaligned 16-bit transfer to memory.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-42-mark.cave-ayland@ilande.co.uk>
The bottom 5 bits contain the number of bytes remaining in the FIFO which is
trivial to implement with Fifo8 (the remaining bits are unimplemented and left
as 0 for now).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-41-mark.cave-ayland@ilande.co.uk>
Rename ESP_CMDBUF_SZ to ESP_CMDFIFO_SZ and cmdbuf_cdb_offset to cmdfifo_cdb_offset
to indicate that the command buffer type has changed from an array to a Fifo8.
This also enables us to remove the ESPState field cmdlen since the command length
is now simply the number of elements used in cmdfifo.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-40-mark.cave-ayland@ilande.co.uk>
Rename TI_BUFSZ to ESP_FIFO_SZ since this constant is really describing the size
of the FIFO and is not directly related to the TI size.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-39-mark.cave-ayland@ilande.co.uk>
The SCSI bus should remain in the message out phase after the SATN and stop
command rather than transitioning to the command phase. A new ESPState variable
cmdbuf_cdb_offset is added which stores the offset of the CDB from the start
of cmdbuf when accumulating extended message out phase data.
Currently any extended message out data is discarded in do_cmd() before the CDB
is processed in do_busid_cmd().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-38-mark.cave-ayland@ilande.co.uk>
Some guests use a mixture of DMA and non-DMA transfers in combination with the
SATN and stop command to transfer message out phase and command phase bytes to
the target. Prepare for the next commit by adding a maxlen parameter to
get_cmd() to allow partial transfers.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-37-mark.cave-ayland@ilande.co.uk>
This matches the description in the datasheet and is required as support for
non-DMA transfers is added.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-36-mark.cave-ayland@ilande.co.uk>
Commit ea84a44250 "scsi: esp: Defer command completion until previous interrupts
have been handled" provided a mechanism to delay the command completion interrupt
until ESP_RINTR is read after the command has completed.
With the previous fixes for latching the ESP_RINTR bits and deferring the setting
of the command completion interrupt for incoming data to the SCSI callback, this
workaround is no longer required and can be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-35-mark.cave-ayland@ilande.co.uk>
The MacOS toolbox ROM issues a command to the ESP controller as part of its
"FAST" SCSI routines and then proceeds to read the incoming data soon after
receiving the command completion interrupt.
Unfortunately due to SCSI block transfers being asynchronous the incoming data
may not yet be present causing an underflow error. Resolve this by waiting for
the SCSI subsystem transfer_data callback before raising the command completion
interrupt.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-34-mark.cave-ayland@ilande.co.uk>
Currently the ESP_RINTR register is set to a specific value as required within
the ESP state machine. In order to implement the upcoming deferred interrupt
functionality it is necessary to set individual bits within ESP_RINTR so that
a deferred interrupt will not overwrite the value of any other interrupt bits.
This also requires fixing up a few locations where the ESP_RINTR and ESP_RSEQ
registers are set/reset unexpectedly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-33-mark.cave-ayland@ilande.co.uk>
At this point it is now possible to properly implement the FIFO flush command
without causing guest errors.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-32-mark.cave-ayland@ilande.co.uk>
The MacOS toolbox ROM performs 4 byte reads/writes when transferring data to
and from the target. Since the SCSI bus is 16-bits wide, use the memory API
to split a 4 byte access into 2 x 2 byte accesses.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-31-mark.cave-ayland@ilande.co.uk>
Now that all data is transferred via the FIFO (ti_buf) there is no need to track
the source buffer being used for the data transfer. This also eliminates the
need for a separate subsection for PDMA state migration.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-30-mark.cave-ayland@ilande.co.uk>
PDMA as implemented on the Quadra 800 uses DREQ to load data into the FIFO
up to a maximum of 16 bytes at a time. The MacOS toolbox ROM requires this
because it mixes FIFO and PDMA transfers whilst checking the FIFO status
and counter registers to ensure success.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-29-mark.cave-ayland@ilande.co.uk>
Currently the target selection for PDMA is done after the SCSI command has been
delivered which is not correct. Perform target selection as part of the initial
get_cmd() call when the command is submitted: if no target is present, don't
raise DRQ.
If the target is present then switch to the command phase since the MacOS toolbox
ROM checks for this before attempting to submit the SCSI command.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-28-mark.cave-ayland@ilande.co.uk>
This better describes the purpose of the function.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-27-mark.cave-ayland@ilande.co.uk>
The cmdbuf is really just a copy of FIFO data (including extra message phase
bytes) so its pdma_origin is effectively TI. Fortunately we already know when
we are receiving a SCSI command since do_cmd == 1 which enables us to
distinguish between the two cases in esp_pdma_read()/esp_pdma_write().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-26-mark.cave-ayland@ilande.co.uk>
Real hardware simply counts down using the in-built TC to determine when the
the PDMA request is complete. Use the TC to determine the PDMA transfer length
which then enables us to remove the redundant pdma_len variable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-25-mark.cave-ayland@ilande.co.uk>
This eliminates the last user of the PDMA-specific pdma_cur variable which can
now be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-24-mark.cave-ayland@ilande.co.uk>
Here the updates to async_len and ti_size are moved into the corresponding
esp_pdma_read()/esp_pdma_write() function to eliminate the reference to
pdma_cur in do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-23-mark.cave-ayland@ilande.co.uk>
Now that PDMA SCSI commands are accumulated in cmdbuf in the same way as normal
commands, the existing logic for locating the start of the SCSI command in
cmdbuf via cmdlen can be used. This enables the PDMA-specific pdma_start and
also get_pdma_buf() to be removed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-22-mark.cave-ayland@ilande.co.uk>
Now that all SCSI commands are accumulated in cmdbuf, remove the buf and buflen
parameters from get_cmd() since these always reference cmdbuf and ESP_CMDBUF_SZ
respectively.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-21-mark.cave-ayland@ilande.co.uk>
Now that all SCSI commands are accumulated in cmdbuf, remove the buf parameter
from do_cmd() since this always points to cmdbuf.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-20-mark.cave-ayland@ilande.co.uk>
ESP SCSI commands are already accumulated in cmdbuf and so there is no need to
keep a separate pdma_buf buffer. Accumulate SCSI commands for PDMA transfers in
cmdbuf instead of pdma_buf so update cmdlen accordingly and change pdma_origin
for PDMA transfers to CMD which allows the PDMA origin to be removed.
This commit also removes a stray memcpy() from get_cmd() which is a no-op because
cmdlen is always zero at the start of a command.
Notionally the removal of pdma_buf from vmstate_esp_pdma also breaks migration
compatibility for the PDMA subsection until its complete removal by the end of
the series.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-19-mark.cave-ayland@ilande.co.uk>
This is the first step in removing get_pdma_buf() from esp.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-17-mark.cave-ayland@ilande.co.uk>
The limiting of DMA transfers to the maximum size of the available data is already
handled by esp_do_dma() and do_dma_pdma_cb().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-15-mark.cave-ayland@ilande.co.uk>
The ESP device already keeps track of the remaining bytes left to transfer via
its TC (transfer counter) register which is decremented for each byte that
is transferred across the SCSI bus.
Switch the transfer logic to use the value of TC instead of dma_left and then
remove dma_left completely, adding logic to the vmstate_esp post_load() function
to transfer the old dma_left value to the TC register during migration from
older versions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-14-mark.cave-ayland@ilande.co.uk>
The value of dma_counter is set once at the start of the transfer and remains
the same until the transfer is complete. This allows the check in esp_transfer_data
to be simplified since dma_left will always be non-zero until the transfer is
completed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-13-mark.cave-ayland@ilande.co.uk>
Perform the length adjustment whereby a value of 0 in the STC represents
a transfer length of 0x10000 at the point where the TC is loaded at the
start of a DMA command rather than just when a TI (Transfer Information)
command is executed. This better matches the description as given in the
datasheet.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-12-mark.cave-ayland@ilande.co.uk>
This function simplifies reading the STC register value without having to manually
shift each individual 8-bit value.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-11-mark.cave-ayland@ilande.co.uk>
These functions simplify reading and writing the TC register value without having to
manually shift each individual 8-bit value.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-10-mark.cave-ayland@ilande.co.uk>
The transfer direction is currently determined by checking the sign of ti_size
but as this series progresses ti_size can be zero at the end of the transfer.
Use the SCSI phase to determine the transfer direction as used in other SCSI
controller implementations.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-9-mark.cave-ayland@ilande.co.uk>
This will become more useful later when trying to debug mixed FIFO and PDMA
requests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-8-mark.cave-ayland@ilande.co.uk>
Move the trace event to the end of the function so that it correctly reports
the returned value if it doesn't come directly from the rregs array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-7-mark.cave-ayland@ilande.co.uk>
This enables us to determine whether the command being issued is for a DMA or a
non-DMA transfer.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-6-mark.cave-ayland@ilande.co.uk>
The QOM object representing ESPState is currently embedded within both the
SYSBUS_ESP and PCI_ESP devices with migration state handled by embedding
vmstate_esp within each device using VMSTATE_STRUCT.
Since the vmstate_esp fields are embedded directly within the migration
stream, the incoming vmstate_esp version_id is lost. The only version information
available is that from vmstate_sysbus_esp_scsi and vmstate_esp_pci_scsi, but
those versions represent their respective devices and not that of the underlying
ESPState.
Resolve this by adding a new version-dependent field in vmstate_sysbus_esp_scsi
and vmstate_esp_pci_scsi which stores the vmstate_esp version_id field within
ESPState to be used to allow migration from older QEMU versions.
Finally bump the vmstate_esp version to 5 to cover the upcoming ESPState changes
within this patch series.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-5-mark.cave-ayland@ilande.co.uk>
Make this new QOM device state a child device of both the sysbus-esp and esp-pci
implementations.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-4-mark.cave-ayland@ilande.co.uk>
The existing ESP QOM type currently represents a sysbus device with an embedded
ESP state. Rename the type to SYSBUS_ESP accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210304221103.6369-3-mark.cave-ayland@ilande.co.uk>
