Admittedly a mostly lateral move, but qemu_img() is essentially the
replacement for qemu_img_pipe_and_status(). It will give slightly better
diagnostics on crash.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-16-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
As part of moving all python iotest invocations of qemu-img onto a
single qemu_img() implementation, remove a few lingering uses of
qemu_img_pipe() from outside of iotests.py itself.
Several cases here rely on the knowledge that qemu_img_pipe() suppresses
*all* output on a successful case when the command being issued is
'create'.
065: This call's output is inspected, but it appears as if it's expected
to succeed. Replace this call with the checked qemu_img() variant
instead to get better diagnostics if/when qemu-img itself fails.
237: "create" call output isn't actually logged. Use qemu_img_create()
instead, which checks the return code. Remove the empty lines from
the test output.
296: Two calls;
-create: Expected to succeed. Like other create calls, the output
isn't actually logged. Switch to a checked variant
(qemu_img_create) instead. The output for this test is
a mixture of both test styles, so actually replace the
blank line for readability.
-amend: This is expected to fail. Log the output.
After this patch, the only uses of qemu_img_pipe are internal to
iotests.py and will be removed in subsequent patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-15-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_pipe calls blank their output when the command being run is a
'create' call and the command succeeds. Thus, the normative output for
this command in iotest 149 is to print a blank line. We can remove the
logging from this invocation and use a checked invocation, but we still
need to inspect the actual output to see if we want to retroactively
skip the test due to missing cipher support.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-14-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_pipe() discards the return code from qemu-img in favor of
returning just its output. Some tests using this function don't save,
log, or check the output either, though, which is unsafe.
Replace all of these calls with a checked version.
Tests affected are 194, 202, 203, 234, 262, and 303.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-13-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Similar to other recent changes: use the qemu_img() invocation that
supports throwing loud, nasty exceptions when it fails for surprising
reasons.
(Why would "--help" ever fail? I don't know, but eliminating *all* calls
to qemu-img that do not go through qemu_img() is my goal, so
qemu_img_pipe() has to be removed.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-12-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a qemu_img_map() function by analogy with qemu_img_measure(),
qemu_img_check(), and qemu_img_info() that all return JSON information.
Replace calls to qemu_img_pipe('map', '--output=json', ...) with this
new function, which provides better diagnostic information on failure.
Note: The output for iotest 211 changes, because logging JSON after it
was deserialized by Python behaves a little differently than logging the
raw JSON document string itself.
(iotests.log() sorts the keys for Python 3.6 support.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220321201618.903471-11-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This removes two more usages of qemu_img_pipe() and replaces them with
calls to qemu_img(), which provides better diagnostic information on
failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-10-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add qemu_img_info() by analogy with qemu_img_measure() and
qemu_img_check(). Modify image_size() to use this function instead to
take advantage of the better diagnostic information on failure provided
(ultimately) by qemu_img().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-9-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_json() gives better diagnostic information on failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-8-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_json() is a new helper built on top of qemu_img() that tries to
pull a valid JSON document out of the stdout stream.
In the event that the return code is negative (the program crashed), or
the code is greater than zero and did not produce valid JSON output, the
VerboseProcessError raised by qemu_img() is re-raised.
In the event that the return code is zero but we can't parse valid JSON,
allow the JSON deserialization error to be raised.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220321201618.903471-7-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Fortify compare_images() to be more discerning about the status codes it
receives. If qemu_img() returns an exit code that implies it didn't
actually perform the comparison, treat that as an exceptional
circumstance and force the caller to be aware of the peril.
If a negative test is desired (perhaps to test how qemu_img compare
behaves on malformed images, for instance), it is still possible to
catch the exception in the test and deal with that circumstance
manually.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-6-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
re-write qemu_img() as a function that will by default raise a
VerboseProcessException (extended from CalledProcessException) on
non-zero return codes. This will produce a stack trace that will show
the command line arguments and return code from the failed process run.
Users that want something more flexible (there appears to be only one)
can use check=False and manage the return themselves. However, when the
return code is negative, the Exception will be raised no matter what.
This is done under the belief that there's no legitimate reason, even in
negative tests, to see a crash from qemu-img.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-5-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img() returning zero ought to be the rule, not the
exception. Remove all explicit checks against the condition in
preparation for making non-zero returns an Exception.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-4-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Quoting the TAP specification: "The plan tells how many tests will be
run [...]. It’s a check that the test file hasn’t stopped prematurely."
That's a good idea of course, so let's support that in the iotest
testrunner, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223095816.2663005-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
These two spots have been missed in commit 9086c76398 ("Rework the
checks and spots using GNU sed") - they need GNU sed, too, since they
are using the "+" address form.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220309101626.637836-1-thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Some qemu-iotests(040 etc) use PCI disk to do test. Without the
mapping, RISC-V flavor use spike as default machine which has no
PCI bus, causing test failure.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/894
Signed-off-by: Kai Zhang <laokz@foxmail.com>
Message-Id: <tencent_E4219E870165A978DB5BBE50BD53D33D2E06@qq.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAmImtE8ACgkQp6FrSiUn
Q2ovmgf/aksDqf2eNcahs++fez+8Qi9ll5OY/qGyjnzBgsatYKjrK+xF7OnjoJox
eRX026lh81Q4EQK7oZBUnr2UCY4bncDBTI7MTLh603EV/tId5ZLwx007ERhzvtC1
mIsQHXNuO9X25LQG2eWnfunY9YztQpiT5r/g3khD2yPBqJWIvBfblzPLx6FkF7px
/WM8xEKCihmGr1Wr3b+zGYL083YkaBWCvHoR8mJt3tEFUj+Qie8XcdV0OVyI0XUj
5goIFRcpVwBE8P2nLtfUKNzEXz22cmdonOJUX7E5IvGO21k5F/HrWlHdo8JnuSUZ
t0w5L9yCxBrRpY1burz30b77J0WMCw==
=C8Dd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2022-03-07' into staging
nbd patches for 2022-03-07
- Dan Berrange: Allow qemu-nbd to support TLS over Unix sockets
- Eric Blake: Minor cleanups related to 64-bit block operations
# gpg: Signature made Tue 08 Mar 2022 01:41:35 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2022-03-07:
qemu-io: Allow larger write zeroes under no fallback
qemu-io: Utilize 64-bit status during map
nbd/server: Minor cleanups
tests/qemu-iotests: validate NBD TLS with UNIX sockets and PSK
tests/qemu-iotests: validate NBD TLS with UNIX sockets
tests/qemu-iotests: validate NBD TLS with hostname mismatch
tests/qemu-iotests: convert NBD TLS test to use standard filters
tests/qemu-iotests: introduce filter for qemu-nbd export list
tests/qemu-iotests: expand _filter_nbd rules
tests/qemu-iotests: add QEMU_IOTESTS_REGEN=1 to update reference file
block/nbd: don't restrict TLS usage to IP sockets
qemu-nbd: add --tls-hostname option for TLS certificate validation
block/nbd: support override of hostname for TLS certificate validation
block: pass desired TLS hostname through from block driver client
crypto: mandate a hostname when checking x509 creds on a client
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All isabus_dev_print() did was to print up to two IRQ numbers per
device. This is redundant if the IRQ numbers are present as QOM
properties (see e.g. the modified tests/qemu-iotests/172.out).
Now that the last devices relying on isabus_dev_print() had their IRQ
numbers QOM'ified, the contribution of this function ultimately became
redundant. Remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-12-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
This validates that connections to an NBD server running on a UNIX
socket can use TLS with pre-shared keys (PSK).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-13-berrange@redhat.com>
[eblake: squash in rebase fix]
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This validates that connections to an NBD server running on a UNIX
socket can use TLS, and require a TLS hostname override to pass
certificate validation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-12-berrange@redhat.com>
[eblake: squash in rebase fix]
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This validates that connections to an NBD server where the certificate
hostname does not match will fail. It further validates that using the
new 'tls-hostname' override option can solve the failure.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-11-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Using standard filters is more future proof than rolling our own.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-10-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Introduce a filter for the output of qemu-nbd export list so it can be
reused in multiple tests.
The filter is a bit more permissive that what test 241 currently uses,
as its allows printing of the export count, along with any possible
error messages that might be emitted.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-9-berrange@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Some tests will want to use 'localhost' instead of '127.0.0.1', and
some will use the image options syntax rather than the classic URI
syntax.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-8-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When developing an I/O test it is typical to add some logic to the
test script, run it to view the output diff, and then apply the
output diff to the reference file. This can be drastically simplified
by letting the test runner update the reference file in place.
By setting 'QEMU_IOTESTS_REGEN=1', the test runner will report the
failure and show the diff, but at the same time update the reference
file. So next time the I/O test is run it will succeed.
Continuing to display the diff when updating the reference gives the
developer a chance to review what was changed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-7-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Note that reads zero areas (not dirty in the bitmap) fails, that's
correct.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add helper that returns both status and output, to be used in the
following commit
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Current scheme of image fleecing looks like this:
[guest] [NBD export]
| |
|root | root
v v
[copy-before-write] -----> [temp.qcow2]
| target |
|file |backing
v |
[active disk] <-------------+
- On guest writes copy-before-write filter copies old data from active
disk to temp.qcow2. So fleecing client (NBD export) when reads
changed regions from temp.qcow2 image and unchanged from active disk
through backing link.
This patch makes possible new image fleecing scheme:
[guest] [NBD export]
| |
| root | root
v file v
[copy-before-write]<------[snapshot-access]
| |
| file | target
v v
[active-disk] [temp.img]
- copy-before-write does CBW operations and also provides
snapshot-access API. The API may be accessed through
snapshot-access driver.
Benefits of new scheme:
1. Access control: if remote client try to read data that not covered
by original dirty bitmap used on copy-before-write open, client gets
-EACCES.
2. Discard support: if remote client do DISCARD, this additionally to
discarding data in temp.img informs block-copy process to not copy
these clusters. Next read from discarded area will return -EACCES.
This is significant thing: when fleecing user reads data that was
not yet copied to temp.img, we can avoid copying it on further guest
write.
3. Synchronisation between client reads and block-copy write is more
efficient. In old scheme we just rely on BDRV_REQ_SERIALISING flag
used for writes to temp.qcow2. New scheme is less blocking:
- fleecing reads are never blocked: if data region is untouched or
in-flight, we just read from active-disk, otherwise we read from
temp.img
- writes to temp.img are not blocked by fleecing reads
- still, guest writes of-course are blocked by in-flight fleecing
reads, that currently read from active-disk - it's the minimum
necessary blocking
4. Temporary image may be of any format, as we don't rely on backing
feature.
5. Permission relation are simplified. With old scheme we have to share
write permission on target child of copy-before-write, otherwise
backing link conflicts with copy-before-write file child write
permissions. With new scheme we don't have backing link, and
copy-before-write node may have unshared access to temporary node.
(Not realized in this commit, will be in future).
6. Having control on fleecing reads we'll be able to implement
alternative behavior on failed copy-before-write operations.
Currently we just break guest request (that's a historical behavior
of backup). But in some scenarios it's a bad behavior: better
is to drop the backup as failed but don't break guest request.
With new scheme we can simply unset some bits in a bitmap on CBW
failure and further fleecing reads will -EACCES, or something like
this. (Not implemented in this commit, will be in future)
Additional application for this is implementing timeout for CBW
operations.
Iotest 257 output is updated, as two more bitmaps now live in
copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220303194349.2304213-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Drop the use of OUTPUT_DIR (test/qemu-iotests under the build
directory), and instead write test output files (.out.bad, .notrun, and
.casenotrun) to TEST_DIR.
With this, the same test can be run concurrently without the separate
instances interfering, because they will need separate TEST_DIRs anyway.
Running the same test separately is useful when running the iotests with
various format/protocol combinations in parallel, or when you just want
to aggressively exercise a single test (e.g. when it fails only
sporadically).
Putting this output into TEST_DIR means that it will stick around for
inspection after the test run is done (though running the same test in
the same TEST_DIR will overwrite it, just as it used to be); but given
that TEST_DIR is a scratch directory, it should be clear that users can
delete all of its content at any point. (And if TEST_DIR is on tmpfs,
it will just disappear on shutdown.) Contrarily, alternative approaches
that would put these output files into OUTPUT_DIR with some prefix to
differentiate between separate test runs might easily lead to cluttering
OUTPUT_DIR.
(This change means OUTPUT_DIR is no longer written to by the iotests, so
we can drop its usage altogether.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220221172909.762858-1-hreitz@redhat.com>
[hreitz: Simplified `Path(os.path.join(x, y))` to `Path(x, y)`, as
suggested by Vladimir; and rebased on 9086c76398
("tests/qemu-iotests: Rework the checks and spots using GNU
sed")]
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
In TAP mode, the stdout is reserved for the TAP protocol, so we
have to make sure to mark other lines with a comment '#' character
at the beginning to avoid that the TAP parser at the other end
gets confused.
To test this condition, run "configure" for example with:
--block-drv-rw-whitelist=copy-before-write,qcow2,raw,file,host_device,blkdebug,null-co,copy-on-read
so that iotest 041 will report that some tests are not run due to
the missing "quorum" driver. Without this change, "make check-block"
fails since the meson tap parser gets confused by these messages.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223124353.3273898-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
iotest 040 already has some checks for the availability of the 'throttle'
driver, but some new code has been added in the course of time that
depends on 'throttle' but does not check for its availability. Add
a check to the TestCommitWithFilters class so that this iotest now
also passes again if 'throttle' has not been enabled in the QEMU
binaries.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223123127.3206042-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Instead of failing the iotests if GNU sed is not available (or skipping
them completely in the check-block.sh script), it would be better to
simply skip the bash-based tests that rely on GNU sed, so that the other
tests could still be run. Thus we now explicitely use "gsed" (either as
direct program or as a wrapper around "sed" if it's the GNU version)
in the spots that rely on the GNU sed behavior. Statements that use the
"-r" parameter of sed have been switched to use "-E" instead, since this
switch is supported by all sed versions on our supported build hosts
(most also support "-r", but macOS' sed only supports "-E"). With all
these changes in place, we then can also remove the sed checks from the
check-block.sh script, so that "make check-block" can now be run on
systems without GNU sed, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220216125454.465041-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test the following scenario:
1. Some block node (null-co) attached to a user (here: NBD server) that
performs I/O and keeps the node in an I/O thread
2. Repeatedly run blockdev-add/blockdev-del to add/remove an overlay
to/from that node
Each blockdev-add triggers bdrv_refresh_limits(), and because
blockdev-add runs in the main thread, it does not stop the I/O requests.
I/O can thus happen while the limits are refreshed, and when such a
request sees a temporarily invalid block limit (e.g. alignment is 0),
this may easily crash qemu (or the storage daemon in this case).
The block layer needs to ensure that I/O requests to a node are paused
while that node's BlockLimits are refreshed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220216105355.30729-4-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a parameter to optionally open a QMP connection when creating a
QemuStorageDaemon instance.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220216105355.30729-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
185 tests quitting qemu while a block job is active. It does not
specifically test quitting qemu while a mirror or active commit job is
in its READY phase.
Add two test cases for this, where we respectively mirror or commit to
an external QSD instance, which provides a throttled block device. qemu
is supposed to cancel the job so that it can quit as soon as possible
instead of waiting for the job to complete (which it did before 6.2).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303164814.284974-5-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the permission API calls into driver-specific callbacks
that always run under BQL. In this case, bdrv_crypto_luks
needs to perform permission checks before and after
qcrypto_block_amend_options(). The problem is that the caller,
block_crypto_amend_options_generic_luks(), can also run in I/O
from .bdrv_co_amend(). This does not comply with Global State-I/O API split,
as permissions API must always run under BQL.
Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean()
callbacks. These two callbacks are guaranteed to be invoked under
BQL, respectively before and after .bdrv_co_amend().
They take care of performing the permission checks
in the same way as they are currently done before and after
qcrypto_block_amend_options().
These callbacks are in preparation for next patch, where we
delete the original permission check. Right now they just add redundant
control.
Then, call .bdrv_amend_pre_run() before job_start in
qmp_x_blockdev_amend(), so that it will be run before the job coroutine
is created and stay in the main loop.
As a cleanup, use JobDriver's .clean() callback to call
.bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL.
After this patch, permission failures occur early in the blockdev-amend
job to update a LUKS volume's keys. iotest 296 must now expect them in
x-blockdev-amend's QMP reply instead of waiting for the actual job to
fail later.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-6-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running in TAP mode, stdout is reserved for the TAP protocol.
To see the "diff" of the failed test, we have to print it to
stderr instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220209101530.3442837-8-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML
-----BEGIN PGP SIGNATURE-----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=/1qA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kwolf-gitlab/tags/for-upstream' into staging
Block layer patches
- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML
# gpg: Signature made Fri 11 Feb 2022 17:44:52 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kwolf-gitlab/tags/for-upstream:
hw/block/fdc-isa: Respect QOM properties when building AML
iotests: Test blockdev-reopen with iothreads and throttling
block: Lock AioContext for drain_end in blockdev-reopen
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Put an NBD block device into an I/O thread, and then read data from it,
hoping that the NBD connection will yield during that read. When it
does, the coroutine must be reentered in the block device's I/O thread,
which will only happen if the NBD block driver attaches the connection's
QIOChannel to the new AioContext. It did not do that after 4ddb5d2fde
("block/nbd: drop connection_co") and prior to "block/nbd: Move s->ioc
on AioContext change", which would cause an assertion failure.
To improve our chances of yielding, the NBD server is throttled to
reading 64 kB/s, and the NBD client reads 128 kB, so it should yield at
some point.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Prior to "block/nbd: Delete reconnect delay timer when done" and
"block/nbd: Delete open timer when done", both of those timers would
remain scheduled even after successfully (re-)connecting to the server,
and they would not even be deleted when the BDS is deleted.
This test constructs exactly this situation:
(1) Configure an @open-timeout, so the open timer is armed, and
(2) Configure a @reconnect-delay and trigger a reconnect situation
(which succeeds immediately), so the reconnect delay timer is armed.
Then we immediately delete the BDS, and sleep for longer than the
@open-timeout and @reconnect-delay. Prior to said patches, this caused
one (or both) of the timer CBs to access already-freed data.
Accessing freed data may or may not crash, so this test can produce
false successes, but I do not know how to show the problem in a better
or more reliable way. If you run this test on "block/nbd: Assert there
are no timers when closed" and without the fix patches mentioned above,
you should reliably see an assertion failure.
(But all other tests that use the reconnect delay timer (264 and 277)
will fail in that configuration, too; as will nbd-reconnect-on-open,
which uses the open timer.)
Remove this test from the quick group because of the two second sleep
this patch introduces.
(I decided to put this test case into 281, because the main bug this
series addresses is in the interaction of the NBD block driver and I/O
threads, which is precisely the scope of 281. The test case for that
other bug will also be put into the test class added here.
Also, excuse the test class's name, I couldn't come up with anything
better. The "yield" part will make sense two patches from now.)
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This is a rather simple class that allows creating a QSD instance
running in the background and stopping it when no longer needed.
The __del__ handler is a safety net for when something goes so wrong in
a test that e.g. the tearDown() method is not called (e.g. setUp()
launches the QSD, but then launching a VM fails). We do not want the
QSD to continue running after the test has failed, so __del__() will
take care to kill it.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The 'throttle' block driver implements .bdrv_co_drain_end, so
blockdev-reopen will have to wait for it to complete in the polling
loop at the end of qmp_blockdev_reopen(). This makes AIO_WAIT_WHILE()
release the AioContext lock, which causes a crash if the lock hasn't
correctly been taken.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220203140534.36522-3-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows us to pack in some extra information about the failure,
which guarantees that if the caller did not *intentionally* cause a
failure (by capturing this Exception), some pretty good clues will be
printed at the bottom of the traceback information.
This will help make failures in the event of a non-negative return code
more obvious when they go unhandled; the current behavior in
_post_shutdown() is to print a warning message only in the event of
signal-based terminations (for negative return codes).
(Note: In Python, catching BaseException instead of Exception catches a
broader array of Exception events, including SystemExit and
KeyboardInterrupt. We do not want to "wrap" such exceptions as a
VMLaunchFailure, because that will 'downgrade' the exception from a
BaseException to a regular Exception. We do, however, want to perform
cleanup in either case, so catch on the broadest scope and
wrap-and-re-raise only in the more targeted scope.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This test checks that a raw image in use by a virtio-blk device does not
share the WRITE permission both before and after migration.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
compression_type can't be used if we want to create image with
compat=0.10. So, skip these tests, not many of them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-20-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test-case "Corrupted size field in compressed cluster descriptor"
heavily depends on zlib compression type. So, make it explicit. This
way test passes with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-19-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Don't touch other incompatible bits, like compression-type. This makes
the test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-18-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
