Directly use tcg_constant_tl() for constant integer,
this save a call to tcg_gen_movi_tl().
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-3-philmd@linaro.org>
The TriCore architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/tricore/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-15-philmd@linaro.org>
The LoongArch architecture uses little endianness. Directly
use the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/loongarch/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-13-philmd@linaro.org>
The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-4-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The AVR architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/avr/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-11-philmd@linaro.org>
The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/i386/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-9-philmd@linaro.org>
The Hexagon architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/hexagon/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-8-philmd@linaro.org>
The Alpha architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/alpha/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-7-philmd@linaro.org>
Introduce ldtul_le_p() and ldtul_be_p() to use directly
in place of ldtul_p() when a target endianness is fixed.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010175246.15779-3-philmd@linaro.org>
The Alpha target is only built for 64-bit.
Using ldtul_p() is pointless, replace by ldq_p().
Mechanical change doing:
$ sed -i -e 's/ldtul_p/ldq_p/' $(git grep -wl ldtul_p target/alpha/)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-4-philmd@linaro.org>
The Hexagon target is only built for 32-bit.
Using ldtul_p() is pointless, replace by ldl_p().
Mechanical change doing:
$ sed -i -e 's/ldtul_p/ldl_p/' \
$(git grep -wl ldtul_p target/hexagon/)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-3-philmd@linaro.org>
Last use of memop_big_endian() was removed in commit 592134617c
("accel/tcg: Reorg system mode store helpers").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-3-philmd@linaro.org>
Invert target_needs_bswap() comparison to match the
COMPILING_PER_TARGET definition (2 lines upper).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010175246.15779-2-philmd@linaro.org>
Better undefined macros once we are done with them,
like we do few lines later with DO_STN_LDN_P().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241003234211.53644-2-philmd@linaro.org>
This patch tests:
1. feasibility of removing mux which does not have frontends attached
or frontends were prior detached.
2. inability to remove mux which has frontends attached (mux is "busy")
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
[ fixed *error leak ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-9-r.peniaev@gmail.com>
With bitset management now it becomes feasible to implement
the logic of detaching frontends from multiplexer.
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-8-r.peniaev@gmail.com>
Frontends can be attached and detached during run-time (although detach
is not implemented, but will follow). Counter variable of muxes is not
enough for proper attach/detach management, so this patch implements
bitset: if bit is set for the `mux_bitset` variable, then frontend
device can be found in the `backend` array (yes, huge confusion with
backend and frontends names).
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-7-r.peniaev@gmail.com>
Move away logic which attaches frontend device to a mux
from `char-fe.c` to actual `char-mux.c` implementation
and make it a separate function.
No logic changes are made.
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-6-r.peniaev@gmail.com>
There is no sense to keep `focus`, `mux_cnt`, `prod`, `cons`
and `tag` variables as signed, those represent either size,
either position in array, which both are unsigned.
`focus` member of `MuxChardev` is kept signed, because initially
set to -1.
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-5-r.peniaev@gmail.com>
Those are boolean variables, not signed integers.
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-4-r.peniaev@gmail.com>
`mux_cnt` struct member never goes negative or decrements,
so mux chardev can be !busy only when there are no
frontends attached. This patch fixes the always-true
check.
Fixes: a4afa548fc ("char: move front end handlers in CharBackend")
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-2-r.peniaev@gmail.com>
This addresses the py311-yaml -> py311-pyyaml rename in FreeBSD.
The change to the OpenSUSE dockerfile is something that will allow
QEMU to access rust bindgen in future.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20241014130255.10119-1-berrange@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If the defaults for --enable-rust ($rust in configure) and Meson's rust
option are out of sync, incremental builds will pick Meson's default.
This happens because, on an incremental build, configure does not run
Meson, Make does instead. Meson then gets the command line options
from either coredata.dat (which has everything cached in Python's pickle
format) or cmd_line.txt (slow path when Meson version is upgraded), but
neither knows about the rust option, and the meson_options.txt default
is used.
This will cause have_rust to be true if rustc is available; and the build
to fail because configure did not put a RUST_TARGET_TRIPLE in config-host.mak.
When in the Rust pull request I changed the $rust default from auto
to disabled, I should have made the same change to meson_options.txt;
do it now.
Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241014110113.173946-1-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A working native Rust compiler is always needed in order to compile Rust
code, even when cross compiling, in order to build the procedural macros
that QEMU uses.
Right now, the check is done in rust/qemu-api-macros/meson.build, but this
has two disadvantages. First, it makes the build fail when the Meson "rust"
option is set to "auto" (instead, Rust support should be disabled). Second,
add_languages() is one of the few functions that are executed even by
"meson introspect", except that "meson introspect" executes both branches
of "if" statements! Therefore, "meson introspect" tries to look for a
Rust compiler even if the option is disabled---and then fails because
the compiler is required by rust/qemu-api-macros/meson.build. This is
visible for example if the compilation host has a stale
scripts/meson-buildoptions.sh and no rustc installed.
Both issues can be fixed by moving the check to the main meson.build,
together with the check for the cross compiler.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to its man page [1], pw_context_connect() sets errno on
failure:
Returns a Core on success or NULL with errno set on error.
It may be handy to see errno when figuring out why PipeWire
failed to connect. That leaves us with just one possible path to
reach 'fail_error' label which is then moved to that path and
also its error message is adjusted slightly.
1: https://docs.pipewire.org/group__pw__core.html#ga5994e3a54e4ec718094ca02a1234815b
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <3a78811ad5b0e87816b7616ab21d2eeef00b9c52.1726647033.git.mprivozn@redhat.com>
Only check we eventually get a shared memory scanout.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-20-marcandre.lureau@redhat.com>
Use a common shareable type for win32 & unix, and helper functions.
This simplify the code as it avoids a lot of #ifdef'ery.
Note: if it helps review, commits could be reordered to introduce the
common type before introducing shareable memory for unix.
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-19-marcandre.lureau@redhat.com>
Similar to what was done in commit 9462ff46 ("virtio-gpu/win32: allocate
shareable 2d resources/images") for win32, allocate resource memory with
memfd, so the associated display surface memory can be shared with a
different process.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-18-marcandre.lureau@redhat.com>
There are no types specific to Windows, so the code compiles on other
platforms, but its useless on !Windows.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-15-marcandre.lureau@redhat.com>
gio.pc variable is a bit bogus in context of cross-compilation, since it
contains an absolute path, relative to the sysroot directory. On Fedora, it ends
up as:
/usr/x86_64-w64-mingw32/sys-root/mingw/lib/pkgconfig/usr/bin/gdbus-codegen
path which does not exist because it is not shipped by Fedora mingw
packages.
Instead, we can rely on meson find_program() behaviour to do a better
job based on its search order and capabilities.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-14-marcandre.lureau@redhat.com>
Use qemu_memfd_alloc() to allocate the display surface memory, which
will fallback on tmpfile/mmap() on systems without memfd, and allow to
share the display with other processes.
This is similar to how display memory is allocated on win32 since commit
09b4c198 ("console/win32: allocate shareable display surface").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-13-marcandre.lureau@redhat.com>
This is an arbitrary limitation that doesn't concern QEMU directly and
may make some use cases unnecessarily more complicated.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-11-marcandre.lureau@redhat.com>
Filtering pending messages when a new scanout is given shouldn't discard
pending cursor changes, for example.
Since filtering happens in a different thread, use atomic set/get.
Fixes: fa88b85dea ("ui/dbus: filter out pending messages when scanout")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-6-marcandre.lureau@redhat.com>
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-5-marcandre.lureau@redhat.com>
A filter function that wants to drop a message should return NULL, in
which case it must also unref the message itself.
Fixes: fa88b85de ("ui/dbus: filter out pending messages when scanout")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-4-marcandre.lureau@redhat.com>
When SET_STREAM_FORMAT is called, we should clear the existing setup.
Factor out common function to close a stream.
Direct leak of 144 byte(s) in 3 object(s) allocated from:
#0 0x7f91d38f7350 in calloc (/lib64/libasan.so.8+0xf7350) (BuildId: a4ad7eb954b390cf00f07fa10952988a41d9fc7a)
#1 0x7f91d2ab7871 in g_malloc0 (/lib64/libglib-2.0.so.0+0x64871) (BuildId: 36b60dbd02e796145a982d0151ce37202ec05649)
#2 0x562fa2f447ee in timer_new_full /home/elmarco/src/qemu/include/qemu/timer.h:538
#3 0x562fa2f4486f in timer_new /home/elmarco/src/qemu/include/qemu/timer.h:559
#4 0x562fa2f448a9 in timer_new_ns /home/elmarco/src/qemu/include/qemu/timer.h:577
#5 0x562fa2f47955 in hda_audio_setup ../hw/audio/hda-codec.c:490
#6 0x562fa2f4897e in hda_audio_command ../hw/audio/hda-codec.c:605
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-3-marcandre.lureau@redhat.com>
Now that we have the MemOp for the access, we can order
the alignment fault caused by memory type before the
permission fault for the page.
For subsequent page hits, permission and stage 2 checks
are known to pass, and so the TLB_CHECK_ALIGNED fault
raised in generic code is not mis-ordered.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the tlb_fill_align hook. Handle alignment not due to
memory type, since that's no longer handled by generic code.
Pass memop to get_phys_addr.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
