This is required later to allow devices to assert a service request (SRQ)
signal to indicate that it has data to send, without having to consume it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-12-mark.cave-ayland@ilande.co.uk>
Rather than each ADB implementation requiring its own functions to manage
autopoll state, timers, and autopoll masks prepare to move this information
directly into ADBBusState.
Add external functions within adb.h to allow each ADB implementation to
manage the new autopoll variables.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-8-mark.cave-ayland@ilande.co.uk>
Don't use a fixed value but instead use the default value from the ADB bus
state.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-6-mark.cave-ayland@ilande.co.uk>
It seems that during the initial work to introduce the via-pmu ADB support a
duplicate autopoll mask variable was accidentally left in place.
Remove the duplicate autopoll_mask variable and switch everything over to
use adb_poll_mask instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-5-mark.cave-ayland@ilande.co.uk>
This is in preparation for consolidating all of the ADB autopoll management
in one place.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-4-mark.cave-ayland@ilande.co.uk>
Commit 84051eb400 "adb: add property to disable direct reg 3 writes" introduced
a workaround for spurious writes to ADB register 3 when MacOS 9 enables
autopoll on the mouse device. Further analysis shows that the problem is that
only a partial request is sent, and since the len parameter is ignored then
stale data from the previous request is used causing the incorrect address
assignment.
Remove the disable-reg3-direct-writes workaround and instead check the length
parameter when the write is attempted, discarding the invalid request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-3-mark.cave-ayland@ilande.co.uk>
This will help ensure that style guidelines are being maintained during
subsequent changes.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-2-mark.cave-ayland@ilande.co.uk>
Currently, the option use_acpi_pci_hotplug is being used to control device
hotplug capability using ACPI for slots of cold plugged bridges. Hence, we
are renaming this option to better reflect what it actually does.
Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
Message-Id: <1592310699-58916-1-git-send-email-ani.sinha@nutanix.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prior to this change, the vhost_user_fill_msg_region function filled out
all elements of the VhostUserMemoryRegion struct except the mmap_offset.
This function is often called on uninitialized structs, which are then
copied into VHOST_USER_SET_MEM_TABLE and VHOST_USER_ADD/REM_MEM_REG
messages. In some cases, where the mmap_offset was not needed, it was
left uninitialized, causing QEMU to send the backend uninitialized data,
which Coverity flagged as a series of issues.
This change augments the vhost_user_fill_msg_region API, adding a
mmap_offset paramenter, forcing the caller to initialize mmap_offset.
Fixes: ece99091c2
Fixes: f1aeb14b08
Reported-by: Coverity (CIDs 1429802, 1429803 and 1429804)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1592650156-25845-1-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
In case it is dynamically instantiated, add the TPM 2.0 device object
under the DSDT table in the ACPI namespace. Its HID is MSFT0101
while its current resource settings (CRS) property is initialized
with the guest physical address and MMIO size of the device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622140620.17229-3-eric.auger@redhat.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove any reference to Acpi20TPM2 and adopt an implementation
similar to build_ghes_v2().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622140620.17229-2-eric.auger@redhat.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
x86 machines can have a single ISA bus only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200619091905.21676-9-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add helper function to add fw_cfg device,
also move code to hw/i386/fw_cfg.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-8-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
DSDT change: isa device order changes in case MI1 (ipmi) is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-7-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200619091905.21676-6-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi aml generator needs this, but it is in floppy code now
so we can make the function static.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200619091905.21676-5-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
DSDT change: isa device order changes in case MI1 (ipmi) is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200619091905.21676-4-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl7x6OcACgkQda1lgCoL
QhFfbQf+MXBK1quIxEKW82Rdf3Eh/uKcAqWQ3IAd/wIHqK2fzB68PSroI7ETrwY1
z2oNtg50Wps43eaRjIJVNnEwU1yKGzDcSfjlnabDH7ZbtSx1VlSfGIiufxN6bh0A
bSBMMCPWlL2rNvQ8pI9B5fEqawjTnXn6GIAxDnYSH5wAIenKffmNC4tiN5hm8pTi
0BcsGSNiBb7BtsAokpMCrKAeASnlD1y11cFIlHmOrYOFs+m6uQ03BGu80A7P6fAa
ip93eW4g10bcBMaZhqgspALOgpEArSAg6Kg8Y9XiN9giJmdZXgRS/U1l9bkKSrXV
QGyaPsubLslMw3ZhO1vggoIxjAdwpA==
=Iew1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging
Merge tpm 2020/06/23 v1
# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-06-23-1:
tpm: Move backend code under the 'backends/' directory
hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"
hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header
hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h'
hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c
hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion
hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources
hw/tpm: Include missing 'qemu/option.h' header
hw/tpm: Do not include 'qemu/osdep.h' in header
hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig
backends: Add TPM files into their own directory
docs/specs/tpm: Correct header path name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
milkymist_memcard_realize() is wrong that way: it passes &err to
qdev_prop_set_drive_err() and qdev_realize_and_unref(). Currently
harmless, because the latter uses it only as first argument of
error_propagate().
Making qdev_prop_set_drive_err() fail involves abuse of -global.
Leave handling that to qdev_prop_set_drive(), like we do elsewhere.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-17-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
On error, pxa2xx_mmci_init() reports to stderr and returns NULL.
Callers don't check for errors. Machines akita, borzoi, mainstone,
spitz, terrier, tosa, and z2 crash shortly after, like this:
$ qemu-system-aarch64 -M akita -drive if=sd,readonly=on
qemu-system-aarch64: failed to init SD card: Cannot use read-only drive as SD card
Segmentation fault (core dumped)
Machines connex and verdex reach the check for orphaned drives first:
$ aarch64-softmmu/qemu-system-aarch64 -M connex -drive if=sd,readonly=on -accel qtest
qemu-system-aarch64: failed to init SD card: Cannot use read-only drive as SD card
qemu-system-aarch64: -drive if=sd,readonly=on: machine type does not support if=sd,bus=0,unit=0
Make pxa2xx_mmci_init() fail cleanly right away.
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-16-armbru@redhat.com>
We always pass &error_abort. Drop the parameter, use &error_abort
directly.
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-15-armbru@redhat.com>
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO()
can; they abort on error.
To clean up this inconsistency, rename qdev_prop_set_drive() to
qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that
aborts on error.
Coccinelle script to update callers:
@ depends on !(file in "hw/core/qdev-properties-system.c")@
expression dev, name, value;
symbol error_abort;
@@
- qdev_prop_set_drive(dev, name, value, &error_abort);
+ qdev_prop_set_drive(dev, name, value);
@@
expression dev, name, value, errp;
@@
- qdev_prop_set_drive(dev, name, value, errp);
+ qdev_prop_set_drive_err(dev, name, value, errp);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
qdev_prop_set_chr() screws up when the property already has a non-null
value: it neglects to release the old value. Both the old and the new
backend become attached to the same device. Unlike for block devices
(see previous commit), this can't be observed from the monitor (I
think).
Example: -serial null -chardev null,id=chr0 -global isa-serial.chardev=chr0
Special case: attempting to use the same backend both times crashes:
$ qemu-system-x86_64 --nodefaults -serial null -global isa-serial.chardev=serial0
Unexpected error in qemu_chr_fe_init() at /work/armbru/qemu/chardev/char-fe.c:220:
qemu-system-x86_64: Device 'serial0' is in use
Aborted (core dumped)
Yet another example: -device with multiple chardev=... (but not
device_add, which silently drops all but the last duplicate property).
Perhaps chardev property override could be made to work. Perhaps it
should. I can't afford the time to figure this out now. What I can
do reject usage that leaves backends in unhealthy states. For what
it's worth, we've long done the same for netdev properties.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-13-armbru@redhat.com>
qdev_prop_set_drive() screws up when the property already has a
non-null value: it neglects to release the old value. Both the old
and the new backend become attached to the same device.
Example (taken from iotest 172): -fda ... -drive if=none,... -global
floppy.drive=none0.
Special case: attempting to use the same backend both times fails.
Example (also from iotest 172): -fda ... -global floppy.drive=floppy0.
Yet another example: -device with multiple drive=... (but not
device_add, which silently drops all but the last duplicate property).
Perhaps drive property override could be made to work. Perhaps it
should. I can't afford the time to figure this out now. What I can
do is reject usage that leaves backends in unhealthy states. For what
it's worth, we've long done the same for netdev properties.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-12-armbru@redhat.com>
qdev_prop_set_netdev() fails when the property already has a non-null
value. Seems to go back to commit 30c367ed44
"qdev-properties-system.c: Allow vlan or netdev for -device, not
both", v1.7.0. Board code doesn't expect failure, and crashes:
$ qemu-system-x86_64 --nodefaults -nic user -netdev user,id=nic0 -global e1000.netdev=nic0
Unexpected error in error_set_from_qdev_prop_error() at /work/armbru/qemu/hw/core/qdev-properties.c:1101:
qemu-system-x86_64: Property 'e1000.netdev' doesn't take value '__org.qemu.nic0
'
Aborted (core dumped)
-device and device_add handle the failure:
$ qemu-system-x86_64 -nodefaults -netdev user,id=net0 -netdev user,id=net1 -device e1000,netdev=net0,netdev=net1
qemu-system-x86_64: -device e1000,netdev=net0,netdev=net1: Property 'e1000.netdev' doesn't take value 'net1'
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -netdev user,id=net0 -netdev user,id=net1 -global e1000.netdev=net0
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) qemu-system-x86_64: warning: netdev net0 has no peer
qemu-system-x86_64: warning: netdev net1 has no peer
device_add e1000,netdev=net1
Error: Property 'e1000.netdev' doesn't take value 'net1'
Perhaps netdev property override could be made to work. Perhaps it
should. I'm not the right guy to figure this out. What I can do is
improve the error message a bit:
(qemu) device_add e1000,netdev=net1
Error: -global e1000.netdev=... conflicts with netdev=net1
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-11-armbru@redhat.com>
We stopped using get_pointer() and set_pointer() for netdev in commit
23120b13c6 "net: don't use set/get_pointer() in set/get_netdev()"
(v2.3.0), and for chardev in commit becdfa00cf "char: replace PROP_CHR
with CharBackend" (v2.8.0). With only the drive user left, they're
not helpful anymore. Eliminate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-10-armbru@redhat.com>
Deprecate
-global isa-fdc.driveA=...
-global isa-fdc.driveB=...
in favour of
-device floppy,unit=0,drive=...
-device floppy,unit=1,drive=...
Same for the other floppy controller devices.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200622094227.1271650-7-armbru@redhat.com>
Helper function fdctrl_init_isa() is less than helpful: one of three
places creating "isa-fdc" devices use it. Open-code it there, and
drop the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-6-armbru@redhat.com>
The floppy controller devices desugar their drive properties into
floppy devices (since commit a92bd191a4 "fdc: Move qdev properties to
FloppyDrive", v2.8.0). This involves some bad magic in
fdctrl_connect_drives(), and exists for backward compatibility.
The functions for boards to create floppy controller devices
fdctrl_init_isa(), fdctrl_init_sysbus(), and sun4m_fdctrl_init()
desugar -drive if=floppy to these floppy controller drive properties.
If you use both -drive if=floppy (or its -fda / -fdb sugar) and
-global isa-fdc for the same floppy device, -global silently loses the
conflict, and both backends involved end up with the floppy device
frontend attached, as demonstrated by iotest 172 (see commit before
previous). This is wrong.
Desugar -drive if=floppy straight to floppy devices instead, with
helper fdctrl_init_drives(). The conflict now gets rejected cleanly:
first, fdctrl_connect_drives() creates the floppy for the controller's
property, then fdctrl_init_drives() attempts to create the floppy for
-drive if=floppy, but fails because the unit is already in use.
Output of iotest 172 changes in three ways:
1. The clash gets rejected.
2. In one test case, "info qtree" has the floppy devices swapped, and
"info block" has their QOM paths swapped. This is because the
floppy device for -fda now gets created after the one for -global
isa-fdc.driveB.
3. The error message for -global floppy.drive=floppy0 changes. Before
the patch, we set isa-fdc.driveA to -fda's block backend, then
create the floppy device for it, then move the backend from
isa-fdc.driveA to floppy.drive. Floppy creation fails when
applying -global floppy.drive=floppy0, because floppy0 is still
attached to isa-fdc. After the patch, we create the floppy for
-fda, then set its drive property to floppy0. Now floppy creation
succeeds, but setting the drive property fails, because -global
already set it. Yes, this is exasperatingly complicated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-5-armbru@redhat.com>
This adds support for memory(pc-dimm) hot remove on arm/virt that
uses acpi ged device.
NVDIMM hot removal is not yet supported.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20200622124157.20360-1-shameerali.kolothum.thodi@huawei.com
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
From 'Application Note AN521', chapter 4.7:
The SMM implements four SBCon serial modules:
One SBCon module for use by the Color LCD touch interface.
One SBCon module to configure the audio controller.
Two general purpose SBCon modules, that connect to the
Expansion headers J7 and J8, are intended for use with the
V2C-Shield1 which provide an I2C interface on the headers.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-15-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-14-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
From 'Application Note AN385', chapter 3.14:
The SMM implements a simple SBCon interface based on I2C.
There are 4 SBCon interfaces on the FPGA APB subsystem.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-13-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
From 'Application Note AN385', chapter 3.9, SPI:
The SMM implements five PL022 SPI modules.
Two pairs of modules share the same OR-gated IRQ.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-12-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-11-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We already model the CMSDK APB watchdog device, let's use it!
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-9-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To differenciate with the CMSDK APB peripheral region,
rename this region 'CMSDK AHB peripheral region'.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-8-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-7-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By using the TYPE_* definitions for devices, we can:
- quickly find where devices are used with 'git-grep'
- easily rename a device (one-line change).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-6-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
