Commit Graph

11 Commits

Author SHA1 Message Date
Markus Armbruster b69c3c21a5 qdev: Unrealize must not fail
Devices may have component devices and buses.

Device realization may fail.  Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).

When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far.  If any of these unrealizes
failed, the device would be left in an inconsistent state.  Must not
happen.

device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.

Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back?  We'd have to
re-realize, which can fail.  This design is fundamentally broken.

device_set_realized() does not roll back at all.  Instead, it keeps
unrealizing, ignoring further errors.

It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.

bus_set_realized() does not roll back either.  Instead, it stops
unrealizing.

Fortunately, no unrealize method can fail, as we'll see below.

To fix the design error, drop parameter @errp from all the unrealize
methods.

Any unrealize method that uses @errp now needs an update.  This leads
us to unrealize() methods that can fail.  Merely passing it to another
unrealize method cannot cause failure, though.  Here are the ones that
do other things with @errp:

* virtio_serial_device_unrealize()

  Fails when qbus_set_hotplug_handler() fails, but still does all the
  other work.  On failure, the device would stay realized with its
  resources completely gone.  Oops.  Can't happen, because
  qbus_set_hotplug_handler() can't actually fail here.  Pass
  &error_abort to qbus_set_hotplug_handler() instead.

* hw/ppc/spapr_drc.c's unrealize()

  Fails when object_property_del() fails, but all the other work is
  already done.  On failure, the device would stay realized with its
  vmstate registration gone.  Oops.  Can't happen, because
  object_property_del() can't actually fail here.  Pass &error_abort
  to object_property_del() instead.

* spapr_phb_unrealize()

  Fails and bails out when remove_drcs() fails, but other work is
  already done.  On failure, the device would stay realized with some
  of its resources gone.  Oops.  remove_drcs() fails only when
  chassis_from_bus()'s object_property_get_uint() fails, and it can't
  here.  Pass &error_abort to remove_drcs() instead.

Therefore, no unrealize method can fail before this patch.

device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool().  Can't drop @errp there, so pass
&error_abort.

We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors.  Pass &error_abort instead.

Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.

One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().

Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2020-05-15 07:08:14 +02:00
Marc-André Lureau 4f67d30b5e qdev: set properties with device_class_set_props()
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.

spatch --macro-file scripts/cocci-macro-file.h  --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .

@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:15 +01:00
Markus Armbruster a27bd6c779 Include hw/qdev-properties.h less
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h.  Include hw/qdev-core.h there
instead.

hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.

While there, delete a few superfluous inclusions of hw/qdev-core.h.

Touching hw/qdev-properties.h now recompiles some 1200 objects.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00
Ladi Prosek b065e275a8 virtio-input: support absolute axis config in pass-through
VIRTIO_INPUT_CFG_ABS_INFO was not implemented for pass-through input
devices. This patch follows the existing design and pre-fetches the
config for all absolute axes using EVIOCGABS at realize time.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1460558603-18331-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-04-13 17:26:12 +02:00
Ladi Prosek 1a782629f6 virtio-input: implement pass-through evdev writes
The write path for pass-through devices, commonly used for controlling
keyboard LEDs via EV_LED, was not implemented. This commit adds the
necessary plumbing to connect the status virtio queue to the host evdev
file descriptor.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459511146-12060-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-04-13 15:52:28 +02:00
Ladi Prosek 848c4d4480 virtio-input: retrieve EV_LED host config bits
VIRTIO_INPUT_CFG_EV_BITS with subsel of EV_LED was always
returning an empty bitmap for pass-through input devices.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Message-id: 1459418028-7473-1-git-send-email-lprosek@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-04-13 15:52:28 +02:00
Markus Armbruster da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Peter Maydell 9b8bfe21be virtio: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:23 +00:00
Gerd Hoffmann e2f6bac301 virtio-input: move sys/ioctl.h include
Drop from include/standard-headers/linux/input.h
Add to hw/input/virtio-input-host.c instead.

That allows to build virtio-input (except pass-through) on windows.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-07-16 17:34:41 +02:00
Gerd Hoffmann 006a5edebe virtio-input: evdev passthrough
This allows to assign host input devices to the guest:

qemu -device virtio-input-host-pci,evdev=/dev/input/event<nr>

The guest gets exclusive access to the input device, so be careful
with assigning the keyboard if you have only one connected to your
machine.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-23 10:32:35 +02:00