When forwarding a segmentation fault into the guest process, we were passing
the host's address directly into the guest process's signal descriptor.
That obviously confused the guest process, since it didn't know what to make
of the (usually 32-bit truncated) address. Passing in h2g(address) makes the
guest process a lot happier.
To make the code more obvious, introduce a h2g_nocheck() macro that does the
same as h2g(), but allows us to convert addresses that may be outside of guest
mapped range into the guest's view of address space.
This fixes java running in arm-linux-user for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the ARM implementation of cpu_signal_handler(), set is_write
correctly using the FSR value which the kernel passes us in the
error_code field of uc_mcontext. Since the WnR bit of the FSR was
only introduced in ARMv6, this means that v5 cores will continue
to behave as before this patch, but they are not really supported
as hosts for linux-user mode anyway since they do not have the
modern behaviour for unaligned accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1370352705-27590-1-git-send-email-peter.maydell@linaro.org
The setjmp() function doesn't specify whether signal masks are saved and
restored; on Linux they are not, but on BSD (including MacOSX) they are.
We want to have consistent behaviour across platforms, so we should
always use "don't save/restore signal mask" (this is also generally
going to be faster). This also works around a bug in MacOSX where the
signal-restoration on longjmp() affects the signal mask for a completely
different thread, not just the mask for the thread which did the longjmp.
The most visible effect of this was that ctrl-C was ignored on MacOSX
because the CPU thread did a longjmp which resulted in its signal mask
being applied to every thread, so that all threads had SIGINT and SIGTERM
blocked.
The POSIX-sanctioned portable way to do a jump without affecting signal
masks is to siglongjmp() to a sigjmp_buf which was created by calling
sigsetjmp() with a zero savemask parameter, so change all uses of
setjmp()/longjmp() accordingly. [Technically POSIX allows sigsetjmp(buf, 0)
to save the signal mask; however the following siglongjmp() must not
restore the signal mask, so the pair can be effectively considered as
"sigjmp/longjmp which don't touch the mask".]
For Windows we provide a trivial sigsetjmp/siglongjmp in terms of
setjmp/longjmp -- this is OK because no user will ever pass a non-zero
savemask.
The setjmp() uses in tests/tcg/test-i386.c and tests/tcg/linux-test.c
are left untouched because these are self-contained singlethreaded
test programs intended to be run under QEMU's Linux emulation, so they
have neither the portability nor the multithreading issues to deal with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* bonzini/header-dirs: (45 commits)
janitor: move remaining public headers to include/
hw: move executable format header files to hw/
fpu: move public header file to include/fpu
softmmu: move remaining include files to include/ subdirectories
softmmu: move include files to include/sysemu/
misc: move include files to include/qemu/
qom: move include files to include/qom/
migration: move include files to include/migration/
monitor: move include files to include/monitor/
exec: move include files to include/exec/
block: move include files to include/block/
qapi: move include files to include/qobject/
janitor: add guards to headers
qapi: make struct Visitor opaque
qapi: remove qapi/qapi-types-core.h
qapi: move inclusions of qemu-common.h from headers to .c files
ui: move files to ui/ and include/ui/
qemu-ga: move qemu-ga files to qga/
net: reorganize headers
net: move net.c to net/
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
the test for glibc < 2 "succeeds" wrongly for any non-glibc C library,
and breaks the build on musl libc.
we must first test if __GLIBC__ is defined at all, before using it
unconditionally.
Signed-off-by: John Spencer <maillist-qemu@barfooze.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Global register AREG0 was always assumed to be usable in user-exec.c,
but this is incorrect for several targets.
Fix with #ifdeffery and by using other variables.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.
This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.
This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an explicit CPUX86State parameter instead of relying on AREG0.
Merge raise_exception_env() to raise_exception(), likewise with
raise_exception_err_env() and raise_exception_err().
Introduce cpu_svm_check_intercept_param() and cpu_vmexit()
as wrappers.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
h2g() will assert if passed an address that's not a valid guest address,
so handle_cpu_signal() needs to check before passing "data address
which caused a segfault" to it, since for a misbehaving guest
that could be anything. If the address isn't a valid guest address
then we can simply skip the attempt to unprotect a guest page
which was made read-only to catch self-modifying code.
This assertion probably fires more readily now than it used to
do because of recent changes to default to reserving guest address
space.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use uintptr_t instead of void * or unsigned long in
several op related functions, env->mem_io_pc and
GETPC() macro.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.
Define global env in dyngen-exec.h.
For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.
LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().
ARM: make raise_exception() static.
Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
