Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pci host config register is used to save PCI address for
read/write config data. If guest writes a value to config register,
and then QEMU pauses the vcpu to migrate, after the migration, the guest
will continue to write pci config data, and the write data will be ignored
because of new qemu process losing the config register state.
To trigger the bug:
1. guest is booting in seabios.
2. guest enables the SMRAM in seabios:piix4_apmc_smm_setup, and then
expects to disable the SMRAM by pci_config_writeb.
3. after guest writes the pci host config register, QEMU pauses vcpu
to finish migration.
4. guest write of config data(0x0A) fails to disable the SMRAM because
the config register state is lost.
5. guest continues to boot and crashes in ipxe option ROM due to SMRAM
in enabled state.
Example Reproducer:
step 1. Make modifications to seabios and qemu for increase reproduction
efficiency, write 0xf0 to 0x402 port notify qemu to stop vcpu after
0x0cf8 port wrote i440 configure register. qemu stop vcpu when catch
0x402 port wrote 0xf0.
seabios:/src/hw/pci.c
@@ -52,6 +52,11 @@ void pci_config_writeb(u16 bdf, u32 addr, u8 val)
writeb(mmconfig_addr(bdf, addr), val);
} else {
outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD);
+ if (bdf == 0 && addr == 0x72 && val == 0xa) {
+ dprintf(1, "stop vcpu\n");
+ outb(0xf0, 0x402); // notify qemu to stop vcpu
+ dprintf(1, "resume vcpu\n");
+ }
outb(val, PORT_PCI_DATA + (addr & 3));
}
}
qemu:hw/char/debugcon.c
@@ -60,6 +61,9 @@ static void debugcon_ioport_write(void *opaque, hwaddr addr, uint64_t val,
printf(" [debugcon: write addr=0x%04" HWADDR_PRIx " val=0x%02" PRIx64 "]\n", addr, val);
#endif
+ if (ch == 0xf0) {
+ vm_stop(RUN_STATE_PAUSED);
+ }
/* XXX this blocks entire thread. Rewrite to use
* qemu_chr_fe_write and background I/O callbacks */
qemu_chr_fe_write_all(&s->chr, &ch, 1);
step 2. start vm1 by the following command line, and then vm stopped.
$ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\
-netdev tap,ifname=tap-test,id=hostnet0,vhost=on,downscript=no,script=no\
-device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\
-device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\
-chardev file,id=seabios,path=/var/log/test.seabios,append=on\
-device isa-debugcon,iobase=0x402,chardev=seabios\
-monitor stdio
step 3. start vm2 to accept vm1 state.
$ qemu-system-x86_64 -machine pc-i440fx-5.0,accel=kvm\
-netdev tap,ifname=tap-test1,id=hostnet0,vhost=on,downscript=no,script=no\
-device virtio-net-pci,netdev=hostnet0,id=net0,bus=pci.0,addr=0x13,bootindex=3\
-device cirrus-vga,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2\
-chardev file,id=seabios,path=/var/log/test.seabios,append=on\
-device isa-debugcon,iobase=0x402,chardev=seabios\
-monitor stdio \
-incoming tcp:127.0.0.1:8000
step 4. execute the following qmp command in vm1 to migrate.
(qemu) migrate tcp:127.0.0.1:8000
step 5. execute the following qmp command in vm2 to resume vcpu.
(qemu) cont
Before this patch, we get KVM "emulation failure" error on vm2.
This patch fixes it.
Cc: qemu-stable@nongnu.org
Signed-off-by: Hogan Wang <hogan.wang@huawei.com>
Message-Id: <20200727084621.3279-1-hogan.wang@huawei.com>
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
object_get_canonical_path_component() returns a malloced copy of a
property name on success, null on failure.
19 of its 25 callers immediately free the returned copy.
Change object_get_canonical_path_component() to return the property
name directly. Since modifying the name would be wrong, adjust the
return type to const char *.
Drop the free from the 19 callers become simpler, add the g_strdup()
to the other six.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200714160202.3121879-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
The doc-comments which document the qdev API are split between the
header file and the C source files, because as a project we haven't
been consistent about where we put them.
Move all the doc-comments in qdev.c to the header files, so that
users of the APIs don't have to look at the implementation files for
this information.
In the process, unify them into our doc-comment format and expand on
them in some cases to clarify expected use cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200711142425.16283-2-peter.maydell@linaro.org
The MachineClass uses an inverted logic (inherited from the
PC machines [*]) to create the chardev backends for the default
devices (see commits 998bbd74b9d..aa40fc9c964 and ac33f8fad1).
As the none-machine doesn't have any hardware device, it is
pointless to initialize chardev backends. Fix by setting the
'no_defaults' bits in its MachineClass.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624105611.1049-1-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-45-armbru@redhat.com>
Convert
visit_type_FOO(v, ..., &ptr, &err);
...
if (err) {
...
}
to
visit_type_FOO(v, ..., &ptr, errp);
...
if (!ptr) {
...
}
for functions that set @ptr to non-null / null on success / error.
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-40-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away, even when we need to keep error_propagate() for other
error paths.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-38-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous two commits did that for sufficiently simple
cases with Coccinelle. Do it for several more manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-37-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
See recent commit "error: Document Error API usage rules" for
rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-32-armbru@redhat.com>
The previous commit used Coccinelle to convert from checking the Error
object to checking the return value. Convert a few more manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-30-armbru@redhat.com>
The previous commit enables conversion of
foo(..., &err);
if (err) {
...
}
to
if (!foo(..., errp)) {
...
}
for QOM functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun = {
object_apply_global_props, object_initialize_child_with_props,
object_initialize_child_with_propsv, object_property_get,
object_property_get_bool, object_property_parse, object_property_set,
object_property_set_bool, object_property_set_int,
object_property_set_link, object_property_set_qobject,
object_property_set_str, object_property_set_uint, object_set_props,
object_set_propv, user_creatable_add_dict,
user_creatable_complete, user_creatable_del
};
expression list args, args2;
typedef Error;
Error *err;
@@
- fun(args, &err, args2);
- if (err)
+ if (!fun(args, &err, args2))
{
...
}
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-29-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
Pass &error_abort instead of NULL where the returned value is
dereferenced or asserted to be non-null. Drop a now redundant
assertion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-24-armbru@redhat.com>
The previous commit used Coccinelle to convert from checking the Error
object to checking the return value. Convert a few more manually.
Also tweak control flow in places to conform to the conventional "if
error bail out" pattern.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-20-armbru@redhat.com>
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
Convert
foo(..., &err);
if (err) {
...
}
to
if (!foo(..., &err)) {
...
}
for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their
wrappers isa_realize_and_unref(), pci_realize_and_unref(),
sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref().
Coccinelle script:
@@
identifier fun = {
isa_realize_and_unref, pci_realize_and_unref, qbus_realize,
qdev_realize, qdev_realize_and_unref, sysbus_realize,
sysbus_realize_and_unref, usb_realize_and_unref
};
expression list args, args2;
typedef Error;
Error *err;
@@
- fun(args, &err, args2);
- if (err)
+ if (!fun(args, &err, args2))
{
...
}
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Nothing to convert there; skipped.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Converted manually.
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-5-armbru@redhat.com>
Hook module loading into the places where we
need it when building devices as modules.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200624131045.14512-4-kraxel@redhat.com
Introduce a new property defining a reserved region:
<low address>:<high address>:<type>.
This will be used to encode reserved IOVA regions.
For instance, in virtio-iommu use case, reserved IOVA regions
will be passed by the machine code to the virtio-iommu-pci
device (an array of those). The type of the reserved region
will match the virtio_iommu_probe_resv_mem subtype value:
- VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
- VIRTIO_IOMMU_RESV_MEM_T_MSI (1)
on PC/Q35 machine, this will be used to inform the
virtio-iommu-pci device it should bypass the MSI region.
The reserved region will be: 0xfee00000:0xfeefffff:1.
On ARM, we can declare the ITS MSI doorbell as an MSI
region to prevent MSIs from being mapped on guest side.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200629070404.10969-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's auto-enable it also when maxmem is specified but no slots are
defined. This will result in us properly creating ACPI srat tables,
indicating the maximum possible PFN to the guest OS. Based on this, e.g.,
Linux will enable the swiotlb properly.
This avoids having to manually force the switolb on (swiotlb=force) in
Linux in case we're booting only using DMA memory (e.g., 2GB on x86-64),
and virtio-mem adds memory later on that really needs the swiotlb to be
used for DMA.
Let's take care of backwards compatibility if somebody has a setup that
specifies "maxram" without "slots".
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Sergio Lopez <slp@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-arm@nongnu.org <qemu-arm@nongnu.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-22-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Account the memory to the configured nid.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-15-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qbus_set_hotplug_handler() is a simple wrapper around
object_property_set_link().
object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails. These are all programming
errors here, so passing &error_abort to qbus_set_hotplug_handler() is
appropriate.
Most of its callers do. Exceptions:
* pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL,
i.e. they ignore errors.
* spapr_machine_init() passes &error_fatal.
* s390_pcihost_realize(), virtio_serial_device_realize(),
s390_pcihost_plug() pass the error to their callers. The latter two
keep going after the error, which looks wrong.
Drop the @errp parameter, and instead pass &error_abort to
object_property_set_link().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
All callers pass &error_abort. Drop the parameter.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-14-armbru@redhat.com>
The patches that introduced the properties were submitted when QEMU 5.0
had not been released yet, so they got merged under the wrong heading.
Move them to hw_compat_5_0 so that 5.0 machine types get the pre-patch
behavior.
Fixes: b889212973 ("hw/i386/vmport: Propagate IOPort read to vCPU EAX register")
Fixes: 0342ee761e ("hw/i386/vmport: Set EAX to -1 on failed and unsupported commands")
Fixes: f8bdc55037 ("hw/i386/vmport: Report vmware-vmx-type in CMD_GETVERSION")
Fixes: aaacf1c15a ("hw/i386/vmport: Add support for CMD_GETBIOSUUID")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Deprecation period is run out and it's a time to flip the switch
introduced by cd5ff8333a. Disable legacy option for new machine
types (since 5.1) and amend documentation.
'-numa node,memdev' shall be used instead of disabled option
with new machine types.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200609135635.761587-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO()
can; they abort on error.
To clean up this inconsistency, rename qdev_prop_set_drive() to
qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that
aborts on error.
Coccinelle script to update callers:
@ depends on !(file in "hw/core/qdev-properties-system.c")@
expression dev, name, value;
symbol error_abort;
@@
- qdev_prop_set_drive(dev, name, value, &error_abort);
+ qdev_prop_set_drive(dev, name, value);
@@
expression dev, name, value, errp;
@@
- qdev_prop_set_drive(dev, name, value, errp);
+ qdev_prop_set_drive_err(dev, name, value, errp);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
qdev_prop_set_chr() screws up when the property already has a non-null
value: it neglects to release the old value. Both the old and the new
backend become attached to the same device. Unlike for block devices
(see previous commit), this can't be observed from the monitor (I
think).
Example: -serial null -chardev null,id=chr0 -global isa-serial.chardev=chr0
Special case: attempting to use the same backend both times crashes:
$ qemu-system-x86_64 --nodefaults -serial null -global isa-serial.chardev=serial0
Unexpected error in qemu_chr_fe_init() at /work/armbru/qemu/chardev/char-fe.c:220:
qemu-system-x86_64: Device 'serial0' is in use
Aborted (core dumped)
Yet another example: -device with multiple chardev=... (but not
device_add, which silently drops all but the last duplicate property).
Perhaps chardev property override could be made to work. Perhaps it
should. I can't afford the time to figure this out now. What I can
do reject usage that leaves backends in unhealthy states. For what
it's worth, we've long done the same for netdev properties.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-13-armbru@redhat.com>
qdev_prop_set_drive() screws up when the property already has a
non-null value: it neglects to release the old value. Both the old
and the new backend become attached to the same device.
Example (taken from iotest 172): -fda ... -drive if=none,... -global
floppy.drive=none0.
Special case: attempting to use the same backend both times fails.
Example (also from iotest 172): -fda ... -global floppy.drive=floppy0.
Yet another example: -device with multiple drive=... (but not
device_add, which silently drops all but the last duplicate property).
Perhaps drive property override could be made to work. Perhaps it
should. I can't afford the time to figure this out now. What I can
do is reject usage that leaves backends in unhealthy states. For what
it's worth, we've long done the same for netdev properties.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-12-armbru@redhat.com>
qdev_prop_set_netdev() fails when the property already has a non-null
value. Seems to go back to commit 30c367ed44
"qdev-properties-system.c: Allow vlan or netdev for -device, not
both", v1.7.0. Board code doesn't expect failure, and crashes:
$ qemu-system-x86_64 --nodefaults -nic user -netdev user,id=nic0 -global e1000.netdev=nic0
Unexpected error in error_set_from_qdev_prop_error() at /work/armbru/qemu/hw/core/qdev-properties.c:1101:
qemu-system-x86_64: Property 'e1000.netdev' doesn't take value '__org.qemu.nic0
'
Aborted (core dumped)
-device and device_add handle the failure:
$ qemu-system-x86_64 -nodefaults -netdev user,id=net0 -netdev user,id=net1 -device e1000,netdev=net0,netdev=net1
qemu-system-x86_64: -device e1000,netdev=net0,netdev=net1: Property 'e1000.netdev' doesn't take value 'net1'
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -netdev user,id=net0 -netdev user,id=net1 -global e1000.netdev=net0
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) qemu-system-x86_64: warning: netdev net0 has no peer
qemu-system-x86_64: warning: netdev net1 has no peer
device_add e1000,netdev=net1
Error: Property 'e1000.netdev' doesn't take value 'net1'
Perhaps netdev property override could be made to work. Perhaps it
should. I'm not the right guy to figure this out. What I can do is
improve the error message a bit:
(qemu) device_add e1000,netdev=net1
Error: -global e1000.netdev=... conflicts with netdev=net1
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-11-armbru@redhat.com>
We stopped using get_pointer() and set_pointer() for netdev in commit
23120b13c6 "net: don't use set/get_pointer() in set/get_netdev()"
(v2.3.0), and for chardev in commit becdfa00cf "char: replace PROP_CHR
with CharBackend" (v2.8.0). With only the drive user left, they're
not helpful anymore. Eliminate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-10-armbru@redhat.com>
Logical and physical block sizes in QEMU are limited to 32 KiB.
This appears unnecessarily tight, and we've seen bigger block sizes
handy at times.
Lift the limitation up to 2 MiB which appears to be good enough for
everybody, and matches the qcow2 cluster size limit.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-9-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add getter for size32, and use it for blocksize, too.
In its human-readable branch, it reports approximate size in
human-readable units next to the exact byte value, like the getter for
64bit size does.
Adjust the expected test output accordingly.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-8-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert all size-related properties in BlockConf to 32bit. This will
accommodate bigger block sizes (in a followup patch). This also allows
to make them all accept size suffixes, either via DEFINE_PROP_BLOCKSIZE
or via DEFINE_PROP_SIZE32.
Also, since min_io_size is exposed to the guest by scsi and virtio-blk
devices as an uint16_t in units of logical blocks, introduce an
additional check in blkconf_blocksizes to prevent its silent truncation.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-7-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It appears convenient to be able to specify physical_block_size and
logical_block_size using common size suffixes.
Teach the blocksize property setter to interpret them. Also express the
upper and lower limits in the respective units.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-6-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce size32 property type which handles size suffixes (k, m, g)
just like size property, but is uint32_t rather than uint64_t. It's
going to be useful for properties that are byte sizes but are inherently
32bit, like BlkConf.opt_io_size or .discard_granularity (they are
switched to this new property type in a followup commit).
The getter for size32 is left out for a separate patch as its benefit is
less obvious, and it affects test output; for now the regular uint32
getter is used.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-5-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make it easier (more visible) to maintain the limits on the blocksize
properties in sync with the respective description, by using macros both
in the code and in the description.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200528225516.1676602-4-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We convert queued work to a QSIMPLEQ, instead of
open-coding it.
While at it, make sure that all accesses to the list are
performed while holding the list's lock.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-3-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-6-alex.bennee@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-58-armbru@redhat.com>
All remaining conversions to qdev_realize() are for bus-less devices.
Coccinelle script:
// only correct for bus-less @dev!
@@
expression errp;
expression dev;
@@
- qdev_init_nofail(dev);
+ qdev_realize(dev, NULL, &error_fatal);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
@ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@
expression errp;
expression dev;
symbol true;
@@
- object_property_set_bool(dev, true, "realized", errp);
+ qdev_realize(DEVICE(dev), NULL, errp);
Note that Coccinelle chokes on ARMSSE typedef vs. macro in
hw/arm/armsse.c. Worked around by temporarily renaming the macro for
the spatch run.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
So far, qdev_realize() supports only devices that plug into a bus:
argument @bus cannot be null. Extend it to support bus-less devices,
too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-55-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-52-armbru@redhat.com>
The "null @bus means main system bus" convenience feature is no longer
used. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-47-armbru@redhat.com>
Sysbus devices almost always plug into the main system bus.
qdev_create() even has a convenience feature to make that easy: a null
bus argument gets replaced by the main system bus. qdev_realize() and
qdev_realize_and_unref() do the same.
We can do better. Provide convenience wrappers around qdev_realize()
and qdev_realize_and_unref() that don't take a @bus argument. They
always pass the main system bus.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-45-armbru@redhat.com>
